Change IP Address DHCP To Static Using Xen VPS
Nov 19, 2008
I'm using XEN to setup my VPS. The installation have no problem for the first two server. On the 3rd server, I install using DHCP IP and it's ok.The problem is when I change the DHCP IP to static IP .
Using Centos 5.2, I'm using vi to edit /etc/sysconfig/network-scripts/ifcfg-eth0
and restart the network service network restart, the IP change, but outside or other static IP VPS network can't ping to this server.
I've tried to change the /etc/xen/the-host-config to include the IP . the results is still the same. Is there some script or way I can use to bridge this new 3rd server to the Xen host ant other network?
* I've restart the Xen server.
View 8 Replies
ADVERTISEMENT
Jun 12, 2008
I just discovered that my Internet provider only provides me with a dynamic IP address because its not commercial!
Is there any way or workaround to sign up for a static ip on the web?
View 14 Replies
View Related
Jun 1, 2009
we have two servers; webserver and database server connected directly to each other via a standard cat6 cross-over cable. I am setting up their static IP's and have a few questions.
Both are running windows 2003. I went and setup the static ip's as follows:
[webserver]
IP: 192.168.200.1
SUBNET MASK: 255.255.255.0
GATEWAY: {blank}
DNS1: {blank}
DNS2: {blank}
[database server]
IP: 192.168.200.2
SUBNET MASK: 255.255.255.0
GATEWAY: {blank}
DNS1: {blank}
DNS2: {blank}
So DNS being blank is fine since there is no need for DNS, all communication is local (no internet). But should the gateway address be blank?
View 6 Replies
View Related
Apr 24, 2007
to administer my own server.
How can I change an ip address for another (cpanel with centOs, bind, exim, apache), without getting down the service?
View 5 Replies
View Related
May 16, 2008
My server has one IP address assigned to it and i use Webmin with Virtualmin to manage domains.
When you put my IP into a browser like [url]however, it points to my websites public_html folder at /home/username/public_html, which was the first domain i set up.
I would like to change it so that the IP points to its own folder: /var/www/html when entered into a browser.. how do i do this?
View 4 Replies
View Related
Jun 13, 2008
how i can change site`s ip from there server
View 4 Replies
View Related
Sep 10, 2009
I am running plesk 9.2. I need to move one domain from the shared IP to dedicated IP. How do I do that? My server vendor has already allocated the IP addresses to me and I can see the unused IPs in the Ip address pool. How can I change the ip of suppose; mydomain.com from 1.2.3.4(shared) to 4.5.6.7(dedicated)?
View 2 Replies
View Related
Nov 11, 2008
I have centos VPS server, it's possible to change primary vps?
View 4 Replies
View Related
Jul 23, 2008
I am using cpanel and i want to change server ip address
how can i change it.
View 3 Replies
View Related
Sep 12, 2008
is there any simple write up or method to change the main server IP in WHM/Cpanel without screwing anything up? I have some new better IPs I wish to use for the servers base IP and accounts but I'm not sure what exactly needs to be changed to make the transfer without breaking anything.
View 5 Replies
View Related
Apr 29, 2008
How can change server primary address in centos?
View 2 Replies
View Related
Aug 22, 2008
I have seen some servers that was able to change thier Geolocation of thier Ip address...
how to change it...
View 2 Replies
View Related
Aug 13, 2008
i have a dedicated server with 5 usable IP's in range xxx.242 to xxx.246
xx.xxx.120.242 <-- main shared IP
xx.xxx.120.243
xx.xxx.120.244 <-- in use by my nameservers
xx.xxx.120.245 <-- in use by my nameservers
xx.xxx.120.246
When i select in WHM "Change Site's IP Address " and the account i want to change it shows me a drop down menu with the ip's of the nameservers AND the
xx.xxx.120.243
If i select that one the domain in the account shows the apache default page only inmediately.
I don't know why the xx.xxx.120.246 ip doesn't show or why the nameserver ip's appear because they are in use.
Do i need to wait for propagation or is this an error?
View 3 Replies
View Related
Feb 1, 2008
How do I go about changing the root's server email address?
View 3 Replies
View Related
Apr 4, 2007
When I load a new account into WHM a pre-figured email address is entered into the DNS Zone automatically using the DNS Template field %rpemail%
Can you tell me where the email address %rpemail% can be found and how to change it.
Also can I change %rpemail% to something else in that field so that the email address it calls up is perhaps the contact address for root or similar?
View 1 Replies
View Related
May 29, 2015
I've looked a good amount of time trying to change/find where its stored. I've looked in var/qmail and there is no alias folder..We're running postfix/dovecot ....
View 4 Replies
View Related
Apr 5, 2009
for a project i'm setting up a WDS server for rapid deployment of Windows 2008 servers.
The information regarding WDS and automated deployments is clear for me.
The only, and probably biggest problem is how to configure the linux dhcp/pxe server to able to boot an image from the WDS to start the installation.
Unfortunately I haven't found much information about it.
I hope some one here can push me in the right direction.
View 1 Replies
View Related
May 24, 2008
I'm currently working on a little project to get a rescue image loaded through PXE. It shouldn't be that difficult, but personally I don't really work with DHCP (obviously we usually just use static IPs), and DHCP is required for PXE.
I've setup the PXE host server and it's also running DHCPd without errors. This is the configuration of dhcpd.conf:
Code:
ddns-update-style ad-hoc;
option subnet-mask 255.255.255.0;
option domain-name-servers x.x.x.37;
subnet x.x.x.0 netmask 255.255.255.0 {
range x.x.x.155 x.x.x.159;
option broadcast-address x.x.x.255;
option routers x.x.x.1;
next-server x.x.x.153;
filename "pxelinux.0";
max-lease-time 100;
default-lease-time 100;
}
(I have replaced the first three numbers of the IPs with x.x.x for privacy reasons)
That configuration seems fine.. Now the problem is that when I try to get a server to boot with PXE, after a minute or so, it reports that it hasn't received any DHCP offers.
Some side information: both the host and client server are on the same network, but not on the same switch though. I guess that shouldn't matter, or does it?
View 5 Replies
View Related
Jul 17, 2007
I follow instruction from redhat to setup my Centos acts like a router. When i setup the dhcp server, at the end when i start the dhcp, it keeps getting me the failed error. So i believe that i need to use 'touch' command for first time start dhcp server but seem that no such file or directory for dhcpd.leases.
Quote:
[root@localhost dhcp-3.0.5]# touch /var/lib/dhcp/dhcpd.leases
touch: cannot touch `/var/lib/dhcp/dhcpd.leases': No such file or directory
View 3 Replies
View Related
Oct 31, 2009
I'm wondering if anyone else has experience with this, or if it's something easy that I'm overlooking.
I am on a VPS service (CentOS Linux) and I want my php mail function emails to send from a specified address. I've already manipulated the headers, so the emails do appear to come from the specified addres, but on mobile devices it comes up as nobody@server1.mydomain.com format. I would like this to read something like no-reply@mydomain.com
know which configuration files can change this default address?
View 5 Replies
View Related
Apr 10, 2008
I changed my sites IP address via cpanel, but now it doesn't show up in a web broswer, I check out cpanel's website for information about this issue, and they posted this:
"It may take up to 48 hours for DNS servers to register the change and the site may not be associated with the new IP address during that time period."
is that true? change the sites IP address will take 48 hours to show up? I figured since it was all local IP stuff, it'll be a instant change and working instantly. since the name servers are all the same, ect.
anyone shed some light. I just wanted to know if I should give it a day to start working? or as of right now, I feel like I need to fix a cpanel error... but if its true, then everything is ok
View 14 Replies
View Related
May 4, 2015
I changed the default certificate (I added the certificate and marked as Default in Server->SSL Certificates).Also I assigned the SSL certificate to my domain.
This works fine, but now I'm trying to make the website PCI Compliant and their test shows that if you request the certificate from the ip address (instead of using the domain) it showns the Parallels self signed certificate instead os showing the default certificate i uploaded). I used also ssltools.websecurity.symantec.com tool and it shows the same. How to change the certificate shown for the one I bought?
View 1 Replies
View Related
Sep 19, 2014
In Tools & Settings --> IP Adresses I got two IP Adresses:
192.168.1.10 (primary, bold)
89.104.83.139
Since the first IP adress is just the internal IP adress, I'd like to remove it, but I get the message that it's not allowed because it would be the primary IP.
Plesk has no option to just switch the primary IP adress, so what's the way to do it with plesk12?
View 1 Replies
View Related
May 28, 2013
I have apache installed on a box with 2 nics. I've seen how to force the listener to an IP, but the issue is that this box uses DHCP. Is it possible to lock the listener to a network/subnet or to a specific NIC?
View 2 Replies
View Related
Oct 29, 2007
Another similar kind of question
I want to run .asp pages on a windows server where i am currently running .HTML files (STATIC without any script or database). I want convert those .html pages to .asp (without any scripts).
So WHAT DO YOU THINK, that .html (static) should work exactly same like .asp (Static) ? Suppose .html pages DO NOT CREATE any issue with IIS load , so using same (basic html code) in .asp would create any issue with APPLICATION POOL (IIS)?
View 3 Replies
View Related
