None:0: Open: /etc/named.conf: File Not Found
Dec 5, 2008
none:0: open: /etc/named.conf: file not found
i had install cpanel on Cent Os 5 on a VPS
Cpanel Correctly Running but named does not working !
i try to restart named but it say :
root@server [/etc]# service named restart
Stopping named: [ OK ]
Starting named:
Error in named configuration:
none:0: open: /etc/named.conf: file not found
[FAILED]
View 5 Replies
ADVERTISEMENT
Mar 2, 2008
i have adidcated server any i get anew one
and my site is rock2host.com
on the domain name i make the ns1 - ns2-ns3-ns4 of ips of the new server
but the problem that to this time there is no any account on my server is working
as i have adns error but i do not what is the problem
i made that
DNS Functions
Adding an A entry for your hostname
Bind reloading on server using rndc zone: [rock2host.com] Error reloading bind on server: rndc: get config key list: not found
DNS Functions
Cleanup Nameserver Config File
Fatal! named.conf fails named-checkconf, please repair named.conf and try again
View 14 Replies
View Related
Apr 8, 2009
It started with this error:
Bind reloading on server01 using rndc zone: [ns1.mydomain.net]
Error reloading bind on server01: rndc: connect failed: 127.0.0.1#953: connection refused
so i did the obvious checked the csf firewall to see if port 953 was enabled and it was
so i took a look at rndc.conf
Code:
root@server01 [~]# nano /etc/rndc.conf
#start of rndc.conf
key "rndc-key" {
algorithm hmac-md5;
secret "KLGSBmWZrev0I4fR4Tm4GXxdcYSTFzF23b1f9is1M=";
};
options {
default-key "rndc-key";
default-server 127.0.0.1;
default-port 953;
};
# End of rndc.conf
# Use with the following in named.conf, adjusting the allow list as needed:
#key "rndc-key" {
# algorithm hmac-md5;
# secret "KLGSBmWZrev0I4fR4Tm4GXxdcYSTFzF23b1f9is1M=";
#};
#
# controls {
# inet 127.0.0.1 port 953
# allow { 127.0.0.1; } keys { "rndc-key"; };
# };
# End of named.conf
Then i took a look at named.conf
Code:
options {
/* make named use port 53 for the source of all queries, to allow
* firewalls to block all ports except 53:
*/
//query-source port 53;
/* We no longer enable this by default as the dns posion exploit
has forced many providers to open up their firewalls a bit */
// Put files that named is allowed to write in the data/ directory:
directory "/var/named"; // the default
pid-file "/var/run/named/named.pid";
dump-file "data/cache_dump.db";
statistics-file "data/named_stats.txt";
/* memstatistics-file "data/named_mem_stats.txt"; */
};
logging {
/* If you want to enable debugging, eg. using the 'rndc trace' command,
* named will try to write the 'named.run' file in the $directory (/var/named").
* By default, SELinux policy does not allow named to modify the /var/named" directory,
* so put the default debug log file in data/ :
*/
channel default_debug {
file "data/named.run";
severity dynamic;
};
};
// All BIND 9 zones are in a "view", which allow different zones to be served
// to different types of client addresses, and for options to be set for groups
// of zones.
//
// By default, if named.conf contains no "view" clauses, all zones are in the
// "default" view, which matches all clients.
//
// If named.conf contains any "view" clause, then all zones MUST be in a view;
// so it is recommended to start off using views to avoid having to restructure
// your configuration files in the future.
view "localhost_resolver" {
/* This view sets up named to be a localhost resolver ( caching only nameserver ).
* If all you want is a caching-only nameserver, then you need only define this view:
*/
match-clients { 127.0.0.0/24; };
match-destinations { localhost; };
recursion yes;
zone "." IN {
type hint;
file "/var/named/named.ca";
};
/* these are zones that contain definitions for all the localhost
* names and addresses, as recommended in RFC1912 - these names should
* ONLY be served to localhost clients:
*/
include "/var/named/named.rfc1912.zones";
};
View 5 Replies
View Related
May 31, 2008
i am running centos 5 with bind9 and there is no /etc/named.conf. All i could find is /etc/named.caching-nameserver.conf
i am planning to runs dns nameserver for my domain. where to do zone entries?
View 9 Replies
View Related
May 30, 2008
i have cpanel running on my dedicated server and i have accidentally deleted /etc/named.conf
how to recover it? will cpanel maintain backup or of some sort? i havent stopped bind so my sites are working till now.
View 9 Replies
View Related
Jun 21, 2007
last night i was looking for closing my Open DNS to close it ...
but it's seems that i keep playing in the file name
/etc/named.conf
i back up it before
but when i finish i didn't cp /named.conf
i type mv named.conf-back /etc/named.conf
and all my server now is down and the support sooo bad ...
they just told me some commands and it's didn't work
then they didn't respond on my ...
View 14 Replies
View Related
Oct 28, 2009
I'd like to add geodns to BIND, so I need to modify named.conf. All that I will put into is a include of an acl file (for different IP ranges), and add a new view for existed domain.
My VPS use cPanel. What is the best way to handle this, as named.conf can be modify by cPanel? I can modify the template in /scripts/rebuilddnsconfig, but I don't know how to add a new view.
There's only one site in my VPS. But I use a few subdomains in DNS (legacy issues). Only one db file in /var/named/
View 2 Replies
View Related
Aug 11, 2008
I have the following problem:
When i try to restart the nameserver service i get the following error:
# service named restart
Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:87: unknown option 'e'
/etc/named.conf:120: unexpected end of input
[FAILED]
my named.conf as follows:
include "/etc/rndc.key";
controls {
inet 127.0.0.1 allow { localhost; } keys { "rndc-key"; };
};
options {
/* make named use port 53 for the source of all queries, to allow
* firewalls to block all ports except 53:
*/
query-source port 53;
// Put files that named is allowed to write in the data/ directory:
directory "/var/named"; // the default
dump-file "data/cache_dump.db";
statistics-file "data/named_stats.txt";
/* memstatistics-file "data/named_mem_stats.txt"; */
};
logging {
/* If you want to enable debugging, eg. using the 'rndc trace' command,
* named will try to write the 'named.run' file in the $directory (/var/named).
* By default, SELinux policy does not allow named to modify the /var/named directory,
* so put the default debug log file in data/ :
*/
channel default_debug {
file "data/named.run";
severity dynamic;
};
};
// All BIND 9 zones are in a "view", which allow different zones to be served
// to different types of client addresses, and for options to be set for groups
// of zones.
//
// By default, if named.conf contains no "view" clauses, all zones are in the
// "default" view, which matches all clients.
//
// If named.conf contains any "view" clause, then all zones MUST be in a view;
// so it is recommended to start off using views to avoid having to restructure
// your configuration files in the future.
view "localhost_resolver" {
/* This view sets up named to be a localhost resolver ( caching only nameserver ).
* If all you want is a caching-only nameserver, then you need only define this view:
*/
match-clients { 127.0.0.0/24; };
match-destinations { localhost; };
recursion yes;
zone "." IN {
type hint;
file "/var/named/named.ca";
};
// include "/var/named/named.rfc1912.zones";
// you should not serve your rfc1912 names to non-localhost clients.
// These are your "authoritativ
zone "smpl.splinteredmedia.net" {
type master;
file "/var/named/smpl.splinteredmedia.net.db";
};
e" internal zones, and would probably
// also be included in the "localhost_resolver" view above :
};
view "external" {
/* This view will contain zones you want to serve only to "external" clients
* that have addresses that are not on your directly attached LAN interface subnets:
*/
recursion no;
// you'd probably want to deny recursion to external clients, so you don't
// end up providing free DNS service to all takers
// all views must contain the root hints zone:
zone "." IN {
type hint;
file "/var/named/named.ca";
};
// These are your "authoritative" external zones, and would probably
// contain entries for just your web and mail servers:
// BEGIN external zone entries
};
z
zone "smpl.splinteredmedia.net" {
type master;
file "/var/named/smpl.splinteredmedia.net.db";
};
I have cPanel installed on a CentOS 5.1 VPS
View 11 Replies
View Related
Jun 23, 2007
I'm getting this warning from check server security option in csf :
--------
You have a local DNS server running but do not have any recursion restrictions set in /etc/named.conf. This is a security and performance risk and you should look at restricting recursive lookups to the local IP addresses only
--------
I saw named.conf but In fact I didn't understand what should I do
Can somebody tells me what should i do and what this warning trying to tell me?
View 2 Replies
View Related
Dec 19, 2008
After Cpanel update latest release version. I have issue with named.conf.
I tried to rebuild named. but..
/scripts/rebuilddnsconfig
fixrndc requires a syntactically correct /etc/named.conf.
No changes were made to /etc/named.conf.
Problem was:
/etc/named.conf:23: when using 'view' statements, all zones must be in views
Anyone can explain me about "/etc/named.conf:23: when using 'view' statements, all zones must be in views"?
View 11 Replies
View Related
Oct 26, 2009
After upcp suddently named failed and only works when I use /scripts/ulimitnamed
But now the server feel so slow because of became named-wrapper -u
How to revert back from named-wrapper -u named to /usr/sbin/named -u named?
View 0 Replies
View Related
Apr 3, 2007
I was tring to upgrade my kernel and after installing new kernel i tried to select kernel but i was unable to find grub.conf file ! /boot/grub/grub.conf
View 8 Replies
View Related
Mar 6, 2008
Rapidly growing error logs showing the same message
$ug-non-zts-20020429/ffmpeg.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20020429//usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0
root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429
./ ../ eaccelerator.so*
root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429
./ ../ eaccelerator.so*
Using cpanel 11 / centos 4
View 1 Replies
View Related
Mar 15, 2013
I work for a start up as well as do independent consulting. I had a friend set up my apache server initially for the start up. It's been running fine. Now I want to host a client's site on the same server. I tired just adding a vhost section at the bottom of the conf file, but it said that I was running two sites off the same port. I tried manipulating the stuff my buddy did for me for the first site, then putting two vhosts on the bottom, but that just didn't work.
View 5 Replies
View Related
Jun 23, 2007
Is there any way to reset it ?
View 2 Replies
View Related
Feb 3, 2007
i can't enter to the SSH secure file transfer and show me that msg':
Failed to open a secure file transfer session
Most likely the sftp-server is not in the path of user on the server-side
View 2 Replies
View Related
Jan 17, 2006
i want to modify a conf file using commandline or a shell script. for eaxmple:
here is a line from my conf file:....
View 1 Replies
View Related
Apr 6, 2008
[root@server1 ~]# service httpd start
no listening sockets available, shutting down
Unable to open logs
CENTOS Enterprise 4.6 i686 on standard - WHM X v3.1.0
apache 2.2
httpd.conf file was empty... I'm recompiling right now.
View 3 Replies
View Related
Feb 2, 2015
I recently needed to make some changes to the domain.conf file at the following path: /etc/nginx/plesk.conf.d/vhosts. When I try to edit the file it just has 3 lines at the top warning me that the changes made here would not persist, while other domain confs have full configs inside.
I am positive that the domain in question is set to use nginx, double checked this, so what gives? Why is the file blank?
View 4 Replies
View Related
Jun 1, 2009
MY VPS IS DOWN.
i have this error on concole on hypervm
enter into CT 1820 failed
Unable to open pty: No such file or directory
View 8 Replies
View Related
Jun 20, 2008
I have following error when try to login in my vps, how can resolve this issue?
Code:
Last login: Thu Jun 19 21:00:43 2008 from xxx.xxx.xxx.xxx
ALERT! You are entering a secured area! Your IP and login information
have been recorded. System administration has been notified.
This system is restricted to authorized access only. All activities on
this system are recorded and logged. Unauthorized access will be fully
investigated and reported to the appropriate law enforcement agencies.
enter into VE 270 failed
Unable to open pty: No such file or directory.
View 3 Replies
View Related
Aug 14, 2008
I am trying to increase my open file limit on my CentOS release 4.6 VPS.
I have tried modifying my /etc/security/limits.conf with the following:
@mysql soft nofile 4096
@mysql hard nofile 4096
@mysql soft sigpending 4096
@mysql hard sigpending 4096
Even is a mannual set it with "ulimit -n 4096 mysql" it will not stick.
Any ideas what I can do to get this limit increased permanently?
View 7 Replies
View Related
Jul 23, 2014
When trying to access any files or pages I'm getting the error:"Not Found...The requested URL /wp-login.php was not found on this server.Apache Server at calmcomputing.net Port 80"
The standard default page displays but my Wordpress installation does not (nor does anything for that matter). I've looked in the file manager (and via ftp) and all the files are there like they should be. This is the same for any of the subdomains that I've setup as well.
View 3 Replies
View Related
Feb 24, 2015
c:Apache24bin>openssl.exe
WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf
OpenSSL>
View 1 Replies
View Related
Nov 25, 2008
I see some errors about lame servers in messages log,and i noticed that look like adress of isp surfer domain beacuse i noticed domain of my isp listed also as lame name server.Here is example:
Nov 24 03:46:55 available9 named[7562]: lame server resolving '247.100.51.72.in-addr.arpa' (in '100.51.72.in-addr.arpa'?): 205.214.192.202#53
Nov 24 03:46:55 available9 named[7562]: lame server resolving '247.100.51.72.in-addr.arpa' (in '100.51.72.in-addr.arpa'?): 205.214.192.201#53
Nov 24 03:46:56 available9 named[7562]: lame server resolving '247.100.51.72.in-addr.arpa' (in '100.51.72.in-addr.arpa'?): 205.214.192.202#53
Nov 24 03:46:56 available9 named[7562]: lame server resolving '247.100.51.72.in-addr.arpa' (in '100.51.72.in-addr.arpa'?): 205.214.192.201#53
Nov 24 07:19:51 available9 named[7562]: FORMERR resolving 'ducksimilar.com/NS/IN': 203.93.208.87#53
Nov 24 07:19:51 available9 named[7562]: FORMERR resolving 'ducksimilar.com/NS/IN': 91.208.228.150#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host1.experienceexcept.com/AAAA/IN': 203.93.208.87#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host2.experienceexcept.com/AAAA/IN': 203.93.208.87#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host1.experienceexcept.com/AAAA/IN': 91.208.228.150#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host2.experienceexcept.com/AAAA/IN': 91.208.228.150#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host1.experienceexcept.com/AAAA/IN': 203.93.208.87#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host2.experienceexcept.com/AAAA/IN': 203.93.208.87#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host1.experienceexcept.com/AAAA/IN': 91.208.228.150#53
Nov 24 07:19:52 available9 named[7562]: FORMERR resolving 'host2.experienceexcept.com/AAAA/IN': 91.208.228.150#53
View 1 Replies
View Related
Feb 8, 2008
I have a problem about my server, after it is unsuspended, it is not actually working anymore.
I got kvm access, when i try to choose harddisk for boot option it says INIT: No inittab file found
and asks for runlevel : I tried 1,2,6 but none of them are working.
I am choosing the rescue mode than it is asking me for rescued login which i don`t know
View 3 Replies
View Related
Feb 14, 2008
Recently,Mysql has been a problem that is going down.So,I have to restart Mysql Service everyday. You can see for further information at here
Quote:
ERROR
Couldn't connect to database.
Please contact admin about this err. Back
DETAIL
2002 : Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
This is the error when i restart Mysql Service via SSH
Quote:
ERROR! MySQL manager or server PID file could not be found!
Starting MySQL SUCCESS!
what i should do and give me a solution to kill this error
View 2 Replies
View Related
Jun 19, 2014
After upgrading Plesk today the panel is reachable however the content area displays the message "File not found." for all pages.
View 6 Replies
View Related
Aug 22, 2009
I can't seem to remember, but what's that command or file used in Linux so that you can view/adjust the number of open files and others in the system?
View 3 Replies
View Related
Jun 6, 2015
On attempting to select the configuration->filter option on RoundCube, we got the error message:
SERVICE CURRENTLY NOT AVAILABLE!
Error No. [501]
On /var/log/plesk-roundcube/errors we can see the following logs:
[06-Jun-2015 14:57:17 -0300]: PHP Error: SieveRules plugin: Unable to open default rule file in /usr/share/psa-roundcube/plugins/sieverules/sieverules.php on line 1523 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
...
[06-Jun-2015 14:57:17 -0300]: PHP Error: SieveRules plugin: Unable to open example rule file in /usr/share/psa-roundcube/plugins/sieverules/sieverules.php on line 1560 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
...
[06-Jun-2015 14:57:17 -0300]: PHP Error: Error loading template for sieverules.sieverules in /usr/share/psa-roundcube/program/include/rcmail_output_html.php on line 496 (GET /roundcube/?_task=settings&_action=plugin.sieverules)
View 1 Replies
View Related
