I olled online and tried to use yum and up2date and they said the package could not be found
I did rpm-q gd and gd is installed but i need it for php-gd.
I looked on the web and i do not see a version for RHEL.
Will you use RHEL 4 or 5? Is there any great differences between them?
I want to use the newer version, but helix server [url] requires RHEL 4 to run, so I am just thinking whether I should use RHEL 4 or 5.
When will RHEL 5 final be released? (And Centos 5 as well)
Wasn't it supposed to be released in December?
Going to order a new server fairly soon, and I'm facing the tough question if I should go with 64-bit or stay with the "classic" 32 bits. My operating system of choice is Red Hat Enterprise 4.
From the research I've done, RHEL 4 (64 bits) should come with dual libraries that would allow running 32 bit and 64 bit applications under the same 64 bit operating system. Sounds great, and if it comes with an overall performance boost I am all for it.
But I've also heard that that's only the theory - in reality, I could end up banging my head against the screen for uncounted hours because compatibility still isn't as good as it's supposed to be. I don't plan to run Plesk or Cpanel, but I still don't want to get into hot water with other applications I've been using on my current 32-bit server.
All in all it's intimidated me quite a bit, so I'd probably go with 32 bits this time around, just to be on the safe side. Then again, I'm still having an eye on the possible performance boost, so dunno. Does anyone have an idea what's the latest on this? 64 bit already safe for the non-experimental-minded, or bleeding edge and stay away from?
Anyone out there have experience with SuSE over RedHat? RHEL is obviously the generalized Enterprise version used across most commercial hosting companies, but I'm interested in hearing about some SuSE experiences people have had.
It looks like SoftLayer offers SuSE and a couple VPS hosting companies do the same. I'm wondering how many large-scale sites are run on this operating system.
how can I install a VNC *(graphical remote control) on RHEL 5.0?
would someone give me a detail instruction and links?
My server is not sending mail for about a week, and i dont know what is the problem and how to fix this.
also, in PLesk, it still states that Mail is on and active.
Could anybody point me the direction how to fix that?
i am having a server runnung RHEL 4
I just installed RHEL on our in house web server. This server is going to host our secure public server.
I was wondering if installing a control panel (cPanel) would be a good idea? I would like something automated to setup php, mysql, apache etc.
With Red Hat Enterprise Linux 4 (RHEL 4), are updated packages made available, or are only security patches backported? Specifically I'm interested in vsftpd. Version 2.0.1 is included in the RHEL installation on a server I'm working on, but there is a bug fix in v2.0.4 that I'd like to get access to.
Is there an easy way for me to browse / search what packages are available for RHEL 4, preferably via website?
My data center happen to install RHEL 4 without a swap partition
Is there anyway to fix it without an OS reload?
Linux OS:
[root@server2 log]# uname -a
Linux 2.6.9-55.0.9.ELsmp #1 SMP Tue Sep 25 02:17:24 EDT 2007 i686 i686 i386 GNU/Linux
[root@server2 log]#
Kernel Version(uname -r)
[root@server2 log]# uname -r
2.6.9-55.0.9.ELsmp
[root@server2 log]#
Hardware Information
Clovertown with quad core , dual thing.
4 gb ram.
Control Panel(if any)
Cpanel
[root@server2 sbin]# df -l
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda5 75505212 37384684 34285012 53% /
/dev/sda1 101086 17347 78520 19% /boot
none 2074560 0 2074560 0% /dev/shm
/dev/sda3 25197252 80800 23836476 1% /tmp
/dev/sda2 40313996 7249168 31016944 19% /var
/tmp 25197252 80800 23836476 1% /var/tmp
[root@server2 sbin]#
[root@server2 sbin]# fdisk -l
Disk /dev/sda: 146.8 GB, 146815733760 bytes
255 heads, 63 sectors/track, 17849 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 5112 40957717+ 83 Linux
/dev/sda3 5113 8299 25599577+ 83 Linux
/dev/sda4 8300 17849 76710375 5 Extended
/dev/sda5 8300 17849 76710343+ 83 Linux
[root@server2 sbin]#
I have a problem with time at one RHEL 4 server, it is a plain box, and from time to time the time (hours) seems to be auto modified, no one is touching the box and then from once it got modified to a few hours less than what we specified, to change time and date we always use:
Code:
date --set "2007-10-24 13:35"
hwclock --set --date="2007-10-24 13:35"
The only thing that I noted is that ntpd daemon was running, while in the rest of our plain box it is not running, maybe this is the reason the system is auto chaning the time?
Is there a Windows GUI software for remote Admining servers that run on Red Hat Linux?
FYI: Currently I use Putty for remotely managing our servers.
So if you can recommend a GUI like Windows desktop software for remotely Admining servers running Red Hat Enterprise, I would very much appreciate that.
FYI: we have like 10 dedicated severs, so a desktop GUI that would allow one to monitor/manage multiple servers would be best. But if the GUI that you think is best can only remotely connect/manage one server at a time, requiring disconnecting to connect to the other server to Admin it, that is fine.
Also, I would love to hear what you think is the best book, best tutorial and reference guide for remotely Admining servers running RHEL? I am not looking for one of those books that are 1000 pages, but something that is a few 100 pages and can be read in 1 month assuming a few hours per day of reading.
For the past two weeks, our Hypertown RedHat RHEL 5.2 server has been going down everyday because of a wierd Kernel Panic problem.
Attached you can see what was displayed on the console at the time of the panic. This is what SoftLayer tech. support team was able to obtain from the console.
We are not using Samba or NFS-based applications.
Here is the server's info:
[kaware3@rannatweb ~]$ uname -a
Linux rannatweb.com 2.6.18-92.1.6.el5PAE #1 SMP Fri Jun 20 02:51:01 EDT 2008 i686 i686 i386 GNU/Linux
[kaware3@rannatweb ~]$ free
total used free shared buffers cached
Mem: 16632176 3244660 13387516 0 234480 1934632
-/+ buffers/cache: 1075548 15556628
Swap: 2096472 0 2096472
[kaware3@rannatweb ~]$ more /etc/fstab
LABEL=/1 / ext3 defaults 1 1
LABEL=/var1 /var ext3 defaults 1 2
LABEL=/boot1 /boot ext3 defaults 1 2
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
LABEL=SWAP-sda3 swap swap pri=0,defaults 0 0
/dev/sdb1 /disk1 ext3 defaults 0 0
/dev/sdc1 /disk2 ext3 defaults 0 0
/dev/sdd1 /disk3 ext3 defaults 0 0
[kaware3@rannatweb ~]$ iostat
Linux 2.6.18-92.1.6.el5PAE (rannatweb.com) 07/13/2008
avg-cpu: %user %nice %system %iowait %steal %idle
3.78 0.00 4.41 9.02 0.00 82.79
Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 90.93 1784.24 1401.45 2073549 1628690
sdb 156.49 1567.09 179.30 1821188 208368
sdc 47.39 443.82 565.21 515787 656864
sdd 0.06 0.88 0.01 1019 8
I seen where a lot of server management companies are charging big bucks for this, so this might save you some time and money.
First
Code:
nano -w /etc/yum.repos.d/dag.repo
Insert
Code:
[dag]
name=Dag RPM Repository for Red Hat Enterprise Linux
baseurl=http://apt.sw.be/redhat/el$releasever/en/$basearch/dag
gpgcheck=1
enabled=1
Then yum update and search for ffmpeg and install all ffmpeg packages including devel.
Seems there is some lib problems along the way so in /etc/ld.so.conf
add
/usr/local/lib
then
ldconfig -v
To install the php extension follow the simple directions on [url]
Then you should be all set!
Tried and tested on 2 different centos server, works fine.
I have 2.4.x version installed on RHEL and I need to install same version on Solaris 10. How can I find out what packages/modules were compiled for RHEL so that I can download same for Solaris and compile them.
View 2 Replies View RelatedWe noticed that for now only Plesk 12 supports RHEL / CentOS 7. Is support for EL 7 planned for Plesk 11.5?
View 13 Replies View RelatedAs cPanel is an integral part of server hosting and has the ability of compiling Apache 1.3.x with PHP4 (cgi) and PHP5 (dso) on your server OS.
Does anyone know or have baselines/benchmarks for which performs better generally for hosting: 32bit or 64bit RedHat 5 when cPanel 11 has compiled for the Apache and php mentioned above on either of these OS editions? (assume latest versions of apache/php4/5)
I was wondering if 32bit performed better or 64bit on a quad core Xeon. Don't forget PHP is compiled for prefork and not multi-threading for Apache 1.3.41 (which are considered legacy 32bit forked apps compiled against 64bit OS).
Or rephrased, could i be hampering performance by running it on a 64bit OS on a Xeon (X3210) or improving performance? I'd assume 64bit would offer better all round processing power, or is this a misconception.
I recently decided to get a server on RedHat Enterprise 5 X86_64 (64bit), when i wondered if 32bit version would have provided better performance and been the better options for compatibility.
I just got a Dell 1600SC dual xeon 2.8 from the Planet with a Dell DRAC3 remote access card. In my RHEL3 system this hardware combination works great, but in the new RedHat Enterprise Linux 5 system the DRAC accepts no keyboard input after RHEL5 loads, thus making it impossible to login to the OS through the drac remote console redirect. Tech support suggested it was because the RedHat Enterprise 5 and CentOS5 kernel does not load the PS/2 keyboard driver which is required for the Drac3 to accept keyboard input. (a drac4 works, but that's not an option for this server I would guess.)
At tech support's suggestion, I added
atkbd.set=2
to the /boot/grub/grub.conf file
rebooting had no change - still text input to enter the bios, but no text input to login to the OS.
I also added
serial --unit=0 --speed=9600 -word=8 --parity=no --stop=1
terminal --timeout=2 serial console
which I saw in /etc/grub.conf (which is not linked to /boot/grub/grub.conf but instead a separate file) but still no luck - no keyboard input accepted through the drac3 remote console to login to the os through the drac console redirect.
Has anyone solved this hardware/software combination? Or is RHEL5 simply not going to be backwards compatible with the Dell DRAC3 hardware?
Any ideas, suggestions, or solutions would be greatly appreciated as I've been working on getting a solution for this for a week now and no closer at this point.
I would really like to have the DRAC as a backup connection with my server incase any firewall or software update issue ever prevents me from connecting via ssh. I hate to have roll back to an older OS though to get it. I'm stuck.
To install the GD graphics library for PHP, is recompiling the only method? And would recompiling PHP break things?
View 12 Replies View Relatedjust recently upgraded from a fully managed VPS to a Dedicated Server. Everything seemed to be going fine, until I tried installing RoR. I have RubyGems installed and all that, but whenever I try to install Rails, the following happens.
[root@server1 ~]# gem install rails --include-dependencies
Libsafe version 2.0.16
Detected an attempt to write across stack boundary.
Terminating /usr/bin/ruby-bin.
uid=0 euid=0 pid=9614
Call stack:
0x519df871 /lib/libsafe.so.2.0.16
0x519dfc5d /lib/libsafe.so.2.0.16
0x80549b8 /usr/bin/ruby-bin
0x8054a52 /usr/bin/ruby-bin
0x80556af /usr/bin/ruby-bin
0x806132f /usr/bin/ruby-bin
0x8061de6 /usr/bin/ruby-bin
0x809eb06 /usr/bin/ruby-bin
0x8055681 /usr/bin/ruby-bin
0x805de6d /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c5e6 /usr/bin/ruby-bin
0x8059c53 /usr/bin/ruby-bin
0x8064680 /usr/bin/ruby-bin
0x805de6d /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c4df /usr/bin/ruby-bin
0x805d776 /usr/bin/ruby-bin
0x805ae8a /usr/bin/ruby-bin
0x805d2ad /usr/bin/ruby-bin
0x805e66a /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c4df /usr/bin/ruby-bin
0x8062e68 /usr/bin/ruby-bin
0x805b9b2 /usr/bin/ruby-bin
0x805e66a /usr/bin/ruby-bin
0x805ea6c /usr/bin/ruby-bin
0x805c5e6 /usr/bin/ruby-bin
0x805d776 /usr/bin/ruby-bin
Overflow caused by memcpy()
Killed
Main >> Software >> Apache Update
I've read through a number of threads regarding installing GD. So sorry for yet another, but I just want to make sure that I'm doing this correctly.
As seen in the attachment below I'm presented with a few options:
Previously Saved Config (** DEFAULT **)
Basic (If your previous build has failed, please use this option)
No PHP
PHP Encryption / E-commerce
PHP Encryption and Image Manipulation
PHP Image Manipulation
PHP Security
Should I start by selecting the option "Previously Saved Config (** DEFAULT **)" and then "Start Customizing Based On Profile"?
I've walked through the steps doing the above and have a question about the last section. Viewing the Exhaustive Options List shows GD as already checked yet towards the bottom I see a checkbox with the following (second attachment below):
Quote:
Save my profile with appropriate PHP 5 options set so that it is compatible with cpphp
This option will make the following changes to your profile prior to the build:
Enables:
CurlSSL
FTP
GD
Gettext
Iconv
Imap
Mbregex
Mbstring
Mysql
Mysql of the system
PGsql
Sockets
Zlib
Should I check to save and then click "Save and Build" to get GD installed?
Some additional information: I have downloaded my default profile. (lol Let's hope I don't have to use it because I wouldn't know where to begin!)
My php.ini file shows that GD is not installed or at least not compiled (if that's the right word to use). To clarify, GD is not in the list.
I have tried yum install pgp-gd and get the following:
root@server [~]# yum install php-gd
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base: styx.biochem.wfubmc.edu
* updates: mirror.raystedman.net
* addons: dist1.800hosting.com
* extras: mirrors.easynews.com
base 100% |=========================| 1.1 kB 00:00
updates 100% |=========================| 951 B 00:00
addons 100% |=========================| 951 B 00:00
extras 100% |=========================| 1.1 kB 00:00
Excluding Packages in global exclude list
Finished
Setting up Install Process
Parsing package install arguments
No package php-gd available.
Nothing to do
root@server [~]# No package php-gd available.
root@server [~]# rpm -q php-gd
package php-gd is not installed
root@server [~]# php -m
[PHP Modules]
bcmath
calendar
ctype
date
dom
eAccelerator
filter
ftp
hash
iconv
imap
json
libxml
memcache
mysql
pcre
posix
Reflection
session
SimpleXML
sockets
SPL
SQLite
standard
tokenizer
xml
xmlreader
xmlwriter
zlib
[Zend Modules]
eAccelerator
root@server [~]# yum list | grep -i gd
gd.i386 2.0.33-9.4.el5_1.1 installed
gd-devel.i386 2.0.33-9.4.el5_1.1 installed
gd-progs.i386 2.0.33-9.4.el5_1.1 installed
gdb.i386 6.5-37.el5_2.2 installed
gdbm.i386 1.8.0-26.2.1 installed
gdbm-devel.i386 1.8.0-26.2.1 installed
sysklogd.i386 1.4.1-44.el5 installed
aspell-gd.i386 50:0.50-4.2.2 base
gdk-pixbuf.i386 1:0.22.0-25.el5 base
gdk-pixbuf-devel.i386 1:0.22.0-25.el5 base
gdm.i386 1:2.16.0-46.el5.centos base
libgdiplus.i386 1.2.5-1.el5.centos extras
libgdiplus-devel.i386 1.2.5-1.el5.centos extras
root@server [~]#
to install VPN on my dedicated server with fedora core 6.
I search on the internet and I found some article.
now I have this question,
I found the rpm in WHM>Software>Install a RPM named openvpn.i386 .
Can I install this rpm from this section?
my server running freebsd 6.2
i want to installing PHP 5 so my server can run 2 version of PHP (4 and 5)
im following the step here [url]
installing was successful
[root@s1 /usr/local/apache/logs]# /usr/local/cpanel/cgi-sys/php5 -v
PHP 5.2.1 (cgi) (built: Mar 30 2007 17:07:11)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
but when i try to running phpinfo for it, its show me an error
i grep the error from error.log and got this
[Fri Mar 30 17:42:47 2007] [error] [client 202.65.236.10] Premature end of script headers: /home/uletbulu/public_html/info.php
[Fri Mar 30 17:42:47 2007] [error] [client 202.65.236.10] File does not exist: /home/uletbulu/public_html/500.shtml
[Fri Mar 30 17:44:07 2007] [error] [client 202.65.236.10] Premature end of script headers: /usr/local/cpanel/cgi-sys/php5
[Fri Mar 30 17:44:07 2007] [error] [client 202.65.236.10] File does not exist: /home/uletbulu/public_html/500.shtml
but for php 4 there is no problem at all
or the syntax for php 5 not using phpinfo(); anymore?
[url]
[url]
I've installed PHP, MySQL and Apache on my XP.
I've uncommented some extensions in php.ini and among them:
extension=php_pdf.dll and extension=php_mysqli.dll, but when I start Apache I got the message:
PHP Startup: Unable to load dynamic library 'c:phpextphp_mysqli.dll' - The specified module could not be found
But I have that module in c:phpextphp_mysqli.dll.
Anyone have tried yum with suse 10.x ? and what its rpm download link?
View 1 Replies View RelatedIve just installed PHP on my virtual server and am getting this error message:
PHP Warning: PHP Startup: (null): Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: (null): Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/dom.so' - /usr/lib/php/modules/dom.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/gd.so' - /usr/lib/php/modules/gd.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: ?Mq?gpp?: Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mbstring.so' - /usr/lib/php/modules/mbstring.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: empty_string in Unknown on line 0
PHP Warning: PHP Startup: D1q?`?p?: Unable to initialize module
Module compiled with module API=20041030, debug=0, thread-safety=0
PHP compiled with module API=20060613, debug=0, thread-safety=0
These options need to match
in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/xsl.so' - /usr/lib/php/modules/xsl.so: undefined symbol: dom_node_class_entry in Unknown on line 0
Does anyone have any ideas what this could be/how it could be fixed? Full phpinfo can be found here: jlwalsh.net/phpinfo.php - if theres any other info I can send let me know.
Trying to install gd library but not able to..
When i do yum install php-gd it says nothing to do..
Kindly help me.. Its a week i am trying to make it work.. Looks like i have searched the whole net..
I have Kevin Yank's book, and have followed the instructions (I thought) absolutely correctly.
most of it seems to be fine, but when I open up the very first page created (the "today.php" project!).. it says "module not found"..
take out the <%php bit... and rename it as an asp file (just to be sure my /localhost settings etc were ok) and it works fine. It's clearly a php install error.. Where do I start looking?
I did search on the forum but failed to find any related thread...
Hi there, I was wondering if anyone have installed ffmpeg-php under windows successfully or you might understand how to do it?
By default it's for linux, but there is a version for win made by some guy/guys to be found here: ffmpeg google groups
Problem is, I don't understand how to install? Could anyone explain, thanks!
Edit: Got it to work!
avcodec.dll (copy to WindowsSystem32)
avformat.dll (copy to WindowsSystem32)
php_ffmpeg.dll (php dir)
Add: extension=php_ffmpeg.dll <- to php.ini
All the other files confused me
We have a managed VPS, and have never needed on our own dedicated servers in teh past to have FFMPEG due to the line of data we host. So, I asked our provider to please install FFMPEG onto our server.
This is the response I have received:
FFMpeg requires PHP to be compiled as CGI (PHPsuexec) that is only officially supported by cPanel. So in order to install FFMpeg modules we have to resetup your VPS with cPanel.
Now our VPS is running Direct Admin on CentOS.
I am not trying to poke holes at our provider, just trying to find out if this is the truth, or if there is a work around that can accomplish this.
I do not want CPANEL on our account. We have two unix techs here at work, however unfortunately they are both off for two weeks as of middle of last week, so i'm caught with who to look for to gain a second opinion.
I have installed a Apache server version 1.3.33 on windows XP and would like to enable mod_rewrite so i can rewrite my ugly url´s. How do I install this great feature in Apache so i can test it locally?
Do i just remove # from
#LoadModule rewrite_module modules/mod_rewrite.so
#AddModule mod_rewrite.c