Windows Azure Platform?
Dec 7, 2008Anyone of you had a chance to try windows azure platform?
If Yes, what do you think of it?
Anyone of you had a chance to try windows azure platform?
If Yes, what do you think of it?
I'd like to ask for opinion what is the best way to backup a client PC in Windows XP/Vista platform.
For example, each PC has a folder inside c:Server
Every 17:00 hours, the PC will FTP all data inside c:Server to backup server.
When it is done, the manager is able to access to his files & do his work remotely online via the server at night in his home. Another reason to have this backup is because they want to secure all the files from any viruses or any accidents in the office during non office hours as the files is important to them. The next morning, he is able to continue his work as normal when files are being merged.
Any kind of such solution available?
Best platform for IMAP mail (Cpanel, Plesk Linux or Plesk Windows)
I need to setup 5 email accounts on my domain, each will use IMAP and store messages on server, so total space taken by each account will be 2-5 GB.
I have decided to go with eurovps.com as I'm close to them and ping is fast.
What is the best solution for IMAP and large email accounts: Linux Cpanel, Linux Plesk or Windows Plesk?
Each account will be accessed by 2 people differently by Thunderbird and occasionally by webmail, so nice webmail is a plus.
I would like to ask if its possible ( supported ) to run Parallers Plesk 12 Panel on centos 7 ( openlogic) in Microsoft Azure infrastructure.
View 3 Replies View RelatedNot mentioning about the price. I want to compare the performance only, between Xen, OpenVZ and Virtuozzo
View 12 Replies View RelatedIn another thread somebody had mentioned something about Citrix Xenserver utilizing shared iSCSI storage with multiple hardware nodes. I think this is a very intriguing concept, but is there anything open source or less expensive that you have used to accomplish similar resource virtualization?
Whether citrix or not, describe your setup!
Which VPS do you prefer and why?
View 14 Replies View RelatedI have a new comparison shopping site. The challenge I currently have is that I have a dedicated server on Hostgator ($374 per month). But, I am in the middle of changing programmers after initial problems. While we are working through issues, I would like to bring down costs (there is very little traffic on the site right now).
Does a service such as Amazon EC2 make sense? It is not that I am unhappy with Hostgator. I just want to reduce cost while we fix the site (could take several months), and, position the site for easy growth (which is why I am considering Cloud Computing).
Comparison shopping is a large database intensive effort, so I do not think that a simple "shared" service makes sense.
There always seems to be some Quality issues with the Nvidia chipsets, so I was looking at getting some feedback on boards if any of you have been using anything else yet.
Normally I only use Tyan for server builds but the only alternative to Nvidia chipset is the Thunder h2000M (S3992-E).
I'm looking for stability #1, performance #2
I'm looking for something non Nvidia but simular to the "TYAN S4989WG2NR Quad 1207(F)" as far as features.
Every one talks about WHMCS however I am not found any real online companies using it's full potential so I dont know how it looks or how good it would fit my plans.
I could not find a overview of companies using their software.
So, I am asking about Resellers Club,
I like the way it is set up for domains, hosting etc and looks like a big company
example... "1and1, godaddy, etc".
Are there any applications similar to Resellers Club for client management, domain management, shopping cart etc that does not look like everyone else on the web?
I have seen here in the Windows Hosting Forum that some people ask questions about Windows hosting where they would really benefit from a basic understanding of the Microsoft web technology.
Recently on Jan 21, Microsoft made it a trivial process to install all the components needed to "kick the tires" with the "Web Platform Installer"
And I've come across a lot of hosters claiming to provide Windows hosting that could really use some quality time with this stuff!
From the Microsoft web site:
The Web Platform Installer (Web PI) is a simple tool that installs Microsoft's entire Web Platform, including IIS, Visual Web Developer 2008 Express Edition, SQL Server 2008 Express Edition and the .NET Framework. Using the Web Platform Installerâs user interface, you can choose to install either specific products or the entire Microsoft Web Platform onto your computer. The Web PI also helps keep your products up to date by always offering the latest additions to the Web Platform.
New Updates! Now supporting Windows XP and Windows Server 2003, Web PI makes it easy to install and stay up-to-date with the Microsoft Web Platform. This updated release lets you install ASP.NET MVC, Visual Studio Tools for Silverlight, and much more!
[url]
A nicer screen shot:
[url]
Does xen run better on a double processor server rather than an intel duo?
View 1 Replies View RelatedBuddies, what do you know about Solaris platform?
Have you used it ever?
I ask as Globaltap.com offers it in their VPS deals and wanna know more about its specifications.
I would like to ask your opinions on the best way to control server services and scripts on different platforms.
Basically i need to execute some command line scripts on a windows server. The way im doing this is vbscript which is called in asp.
What i really want to do is have a central server on linux which i can host a php script and mysql database on which in turn connects to the windows server to execute the vbscript.
Ive always worked with php and mysql so i dont really want to run everything in asp. If i did run everything in asp im not to sure if it would be clever to run asp scripts with mysql and would then have to go to the microsoft sql 2005 route.
So my question is what would be my best way to run php and mysql on a linux server that can in turn connect to a windows server to run a vbscript or execute through command line and log data to mysql, baring in mind authentication and security.
I do have php and mysql set up on the windows server but after alot of trouble getting it running right im not to keen on running the php scripts local, i really need a central linux server for the scripts.
The most common hosting platform is linux correct?
View 9 Replies View RelatedDo you prefer Virtuozzo over other VPS platforms...IE: Is that what makes your selling point in the end...or does the VPS platform not really matter to you?
View 2 Replies View RelatedI would like to make a cgi cross platforms. Some servers are running Ubuntu server, 32 bit others are running Centos 64 bit and so one. How do i make a cgi script that run well at least for Linux based operating systems such as Debian, Ubuntu, RedHat and so one ?
View 1 Replies View RelatedWe have a small web+email hosting and data center business in Africa. We've been providing hosting services to our clients using Plesk on Dell-based servers (connected over a Fiberchannel interface to a SAN). Our data center is connected via an STM-4 and multiple STM-1s to 2 different upstream providers.
The problem we're having is (as a result of our own lack of knowledge) that our solution is just not scalable in the current configuration. We essentially buy a Dell server, install Plesk and keep provisioning customer domains (web and mail hosting) on it till capacity runs out (we max out on average at 400 domains per server) and then buy the next Dell machine and repeat.
What we're looking for is advice on building a more scalable and automated solution. Essentially we're looking for a software and hardware solution (blade solution with web and mail software that is able to harness the power / redundancy of multiple blade servers) that enables us to provision thousands of customers at one go (and simply add more blades servers as needed).
I have had a bunch of various servers in my garage for years and it's proved to be a lot cheaper than having to fork out for training courses to learn different os's.
Plus since i work from home it's handy to have a setup that has the same operating systems that i work with, mainly hpux, solaris n centos
A couple of years ago i decided to try and get it running off green energy.
From the renewable energy point of view i have 6 big 12v 110ah batteries from a datacenter ups that were being decomissioned, linked to a decent 2kw inverter i managed to pick up very cheap.
Batteries are topped by a couple of solar panels and a small wind turbine (both ebay bargains).
I dont run all the servers at the same time but i can have few running happily.
I was wondering whether anyone here has done anything similar?
I originally started the idea off just to run 12v lighting in the garage but when i got the ups batteries i thought i'd take it a stage further
for a SMTP server / hints at how it might be done to accomodate the following :
One single email will be sent. If it doesn't get sent on the first try by one server, another server at another location will attempt the connection and will send out the email then.
Is there a prebuilt solution that anyone knows that will help with these things ? If not, do you know of any ways that this might be possible to be done - even if you don't know the exact details of how it should be done - any help in finding out something like this would help .
Note :
Linux / Windows / FreeBSD / Solaris is fine. So whatever OS it is, it's fine by me.
i have installed ppa 11.5 update #3 and now updated to update #4.
While adding new service nodes, i get everytime the error "Can not determine remote host "hostname" platform". I tryed Apache web server standalone and with mysql, postfix...
I tried adding an apache service node to PPA Admin Node.
I referred to the specs at [URL] ....
Specifications of the Apache server node are:
RHEL 6.4 64bit
RAM 3GB
CPU 2.5GHz
Free Space 18GB
Ports Opened:
80, 443: HTTP, HTTPS
8352-8999: Communication between a service node and PPA panels
22: Communication through SSH
20, 21: FTP connections
But when I tried adding it as a service node, PPA says The Linux platform installed on the remote host 'xx.xx.xx.xx' is not supported. Please, check the list of supported platforms.
I was actually curious about this since Windows 2008 version came out.
What is the difference between Windows media services on Windows 2003 and Windows 2008?
Any company rent Windows Server 2003 Web Edition ?
SPLA and External licenses ?
With Micfrosoft need pay 2,000$
I wait your answerds.
With Windows 2003 server, there are comprehensive lists of what you need to do to secure the server before use. For Windows 2008, I wonder is there such a list? Or is it true as what I heard from Microsoft that it is already secured out of the box?
Anyone has any resources on the hardening or preparation of 2008 for server hosting uses?
FTPS is not working after upgrade from plesk 11. On plesk 11 windows and linux worked fine, after upgrade my windows server, it stopped working.
Code:
PS C:Windowssystem32> & "C:Program Files (x86)ParallelsPleskadmininpmm-ras.exe" --check-repository --dump-storage=ftps://****:****@***.***.***.***:21 --debug --verbose
[2014-11-11 21:16:12.981| 4688] INFO: pmm-ras started : "C:Program Files (x86)ParallelsPleskadmininpmm-ras.exe" --check-repository "--dump-storage=ftps://****:****@***.***.***.***:21" --debug --verbose
[2014-11-11 21:16:12.997| 4688] INFO: Repository 'ftps://***.***.***.***:21': Initializing...
[code]....
I'm making a reasonably uninformed comparison here. Since Windows Vista is noted to be more resource intensive and slower than Win XP, are we right in assuming that Windows 2008 is slower than Windows 2003?
For instance, with two boxes with an identical hardware setup but the two different server OSes, will the same application like, say MySQL run slower on the Win 2008 machine?
There seem to be strong forum rules in place about the kinds of posts that hosters can make.
But from my perspective it is somehow leaving a large gap in useful information I would like to know that I can't quite put my finger on right now.
So I would like to get responses from Windows hosters in this thread without violating any forum spam guidelines and I sure hope I'm not wasting my time here with this concept but here goes...
So, the topic:
Ultimately, the thing Windows Web Hosters are providing is the delivery of information that has been constructed by developers using program code they have assembled using a large array of mostly .NET technology.
The reason the Hoster is providing Windows hosting is that a sufficiently large enough population of Web Developers have been attracted to some aspect of the Windows technology stack.
And there is certainly lots of innovative and interesting technology that attracts developers to focus on .NET in just the same way that there is also interesting technology in the Linux world.
So here's the problem. It appears as if the Windows hosting companies with the odd exception have almost no interest in Windows and .NET technology.
But if they actually did have such an interest, it is not clear how they would communicate it for discussion here at WHT because of the spam rules and of course trying to communicate anything at all about hosting on the general internet is just swamped by spam. The noise level is just insane!
So I am hoping that such a discussion can take place in this thread by asking some very specific questions:
1. What interesting Microsoft technology have you researched, tested or played with lately?
2. What programs or scripts have you personally developed lately to investigate .NET 3.5 features?
3. What do you think of XBAP delivery from the net and why do you think it hasn't caught on in a larger way since it sure delivers a richer client experience than Flash or even Silverlight.
4. What do you think of Azure and will Microsoft let hosters be part of the cloud anytime soon? Can you think of useful or interesting Azure mashups from a hosting perspective?
5. Have you tried any totally silly and insane things with the .NET runtime inside of SQL Server 2005/2008 that would give your DB guys a heart attack?
6. Have you tried out the Google systems where you give your employees 20% of company time to play around with personal projects like this?
Latest Update 12.0.18 Update 12 appears to have removed PHP 5.4 and PHP 5.5 from my dropdown under hosting settings.
The only PHP that is left is PHP 5.3
Yet, the updates and upgrades page still lists PHP 5.4 and PHP 5.5 as installed.
Also PHP is still working on the virtual websites that were previously enabled with either 5.4 or 5.5, but not able to change using the Plesk Panel.
Given that Parallels has broken the Panel in that latest automatic update I'd hope it can be resolved ASAP.
I can't even find any references in the KB about Plesk 12 on Windows regarding PHP versions
I can even give feedback about the broken patch as every feedback channel requires paid support.