Rsync Mysql Every Hour Or 2?
How would I go about backing up MySQL databases every hour or 2?
I think I read somewhere you shouldn't do a direct rsync as the tables would not be locked or something like that.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Apache And Mysql Going Down Every Half Hour
I am facing an very typical problem, when I start apache and mysql both my site works good for half and hour or so then start getting slower and slower to load and after sometime becomes completely inactive. Then i have to restart both mysql and apache to get my site back. When sites became inactive I have to restart only apache to see it back.Restarting only mysql dont help at that time. Apache runs without any problem when running alone .(mysql stoped.)
View Replies!
View Related
Connection To MySQL Hangs 2-3 Times/hour
I just got a new server and discoverd very strange problem. It happends 2-3 times every hour. When I try to access some webpage which connects to MySQL, I get page header and then page hangs for some 1 minute. After some 1 minute everything is back to normal. I can open several windows with different websites hosted on my server and the same problem is in all windows. At the same time I can access al websites without MySQL connections. I have Fedora Core5 MySQL version 5.0.27
View Replies!
View Related
How Many Emails Can Be Reasonably Sent Per Hour
I have a P4 2.8GHz Linux box with a Gig of RAM. How many emails per hour could I expect that this server can handle per hour? I would of course want that the server has enough horse power to handle visitors to the web sites. This is sort of a followup to a previous thread that I started concerning the limit on # of emails per domain per hour. The box came with a [cPanel] default of 500 per hour. Can I expect for my server to be able to handle more than that? 1000? 2000? 10,000? Do I need a more powerful server? I hope not - I just don't have the budget. [ FYI - The emails are legitimate and not spam. I am sending out email reminders of personal events and holidays to subscribers that enable this option. ]
View Replies!
View Related
Email Limits Per Hour
I have take some weeks ago a VPS with 40 giga space and 386mb dedicated ram and all is managed with WHM/Cpanel. I need to know how I must set the limit of sending email per hours...In fact I see all hosting company limit that to more less 500 email per hour. I know this limit depend of lot factor like number of account on server and activity or users... I ask that because my users will have Joomla installed with a Newletter component and so something this component will be used for send monthly newletter... Do you have some experience with that ? How have you set your email limit? How much users have you on your server? Other question: If for example I set limit to 500 email per hours and a user send 1000 email...what happend to the 500 other email? It will be put on queue and send the next hours or it will be lost?
View Replies!
View Related
SingleHop - 12 Hour Review
after my LimeStoneNetworks fiasco, I decided to venture elsewhere. SingleHop. I bought the server in the early afternoon hours, talked to a Chris over there via LiveChat, answered all of my pretty nutty questions, I was convinced! So, Server was purchased, and was all set and ready to go before 5. I had set up a test domain, finished with my DNS stuff, Mail, MySql and Cpanel / WHM main issues by 7PM. 8PM, Propagation decided to go quickly in my area, the site was LIVE. 8:30PM, tested PHP, MySql, Email...all checked out but email, however later I found out it was my dumba$$ and made a mistake with a zone entry. 10PM, everything's working, email, FTP, setting up new websites, adding clients, Billing, everything is working peachy! 10:30PM, took a nap, after feeling GREAT! 12:25PM, wokeup...still can't believe I'm almost done with almost all of my 14 domains! Support: First off, the LEAP panel over at singlehop is the greatest / coolest thing I've ever seen. (leap.singlehop.com). You can purchase add-ons to your server, check your bandwidth useages, server details, buy a completely new server, manage (read and send tickets) all in this cool windows-ish panel that's smoking fast apparently coded in AJAX, it even includes a web-based SSH client so you don't need PuTTy...too cool! (By the way, Google's Chrome Browser LOVES this!) I entered multiple tickets this evening just for figuring out things that I didn't know. There were NO issues with SingleHop setting up my box, etc. Tickets were entered, and QUICKLY answered, maximum time thus far was 30minutes. Server: I have a E2200, 2gbs of ram, 5TBs of data, 100mbit link, Linux CentOS, Cpanel, blah blah blah. For an E2200, this thing's like a Fiat on steroids. I'll never make the mistake of getting a windows machine ever again. (I love my linux!) It's based in Chicago, my present location (Connecticut) I ping it at 35-39ms) Plenty quick for me and the northeast Things that made me go SingleHop instead of LiquidWeb (the two I was tearing my hair out at). SingleHop offers 5TB in, 5TB out (10TB total). Liquid Web with the server I was looking at only offered 1.6TB in 1.6TB out (3.2TB total). LiquidWeb's Support seemed excellent, pricewise ($204 server configuration) I thought I could do better. It was a TOUGH CHOICE. Both providers seemed to have their heads on straight, I've read reviews about both companies here at WHM, both were neck and neck. SingleHop Offered the most bandwidth, moreover, Chris on the live support chat was absolutely amusing to talk too. What's happening now?: I'm continuing to ad the rest of my domains to my server, everything is shockingly fast, and I have no idea why propagation is taking less than 2 hours (sometimes even 20 minutes?!?). I'm planning my next moves, continuing my billing, and posting here because setting up everything didn't take all night like I thought it would. I guess I'll hop on some news site and read up some articles. These 12hours (not even a FULL 12 hours, I just rounded it up!) so far have been great! I will update this when I hit the week mark.
View Replies!
View Related
Debian - Reboot Every Hour
problem on one server with debian, the last month it have a 100% f uptime, but since yesterday automaticly it reboot every 1 hour exactly! this is a game server , dont have service like httpd , mysql dns , nothing! , I uninstall cron jobs thinking that will solve the problem, but no ..... I install firewall, run rkhunter and chkrootkit, check whell gruop and nothing logs: Jan 17 05:20:00 debian -- MARK -- Jan 17 05:40:00 debian -- MARK -- Jan 17 06:00:18 debian syslogd 1.4.1#18: restart. Jan 17 06:00:18 debian kernel: klogd 1.4.1#18, log source = /proc/kmsg started. Jan 17 06:00:18 debian kernel: Bootdata ok (command line is root=/dev/sda1 ro ) I change root password and ssh port but nothing... I think that could be a issue on debian or some exploit cause it, this was happend Suddenly one day to another it is very Strange.... somebody know about this? SERVER: debian:~# uname -a Linux debian 2.6.18-5-amd64 CORE 2 QUAD - 2GB ram - debian 64 bits
View Replies!
View Related
The One Hour Support Guarantee
There are many of us who choose web hosting services for their website based on a number of factors like price, web space provided, server uptime etc. Honestly any web hosting package which provides about 5 GB of web space under US $20 per month is fine to me. And of course most web hosting companies will tell you that they provide 99.9% uptime which honestly is not lived up to by 90% of the companies out there. Any technical person can tell you that there are large numbers of issues that creep up while running a web hosting service which makes it very difficult to actually provide 99% uptime. For me, the single most important aspect of a web hosting service is its support and what kind of guarantee they give on their technical and customer support. Things can go wrong in any service, but how fast you rectify it is the most important thing. And not just that, website owners have different technical levels. Some might need help for the most basic features while some would require more complex support for the databases, scripts etc. A good web hosting company would always provide 1 hour support guarantee to you for your queries. Even if a query is complex and the support staff needs to consult their administrators, programmers etc, it is always nice for a customer to be updated of what is going on and whether they can solve it immediately or after consultation with various people working in the web hosting company. It can be very irritating for you if have opened a support ticket and next thing you know its been hours or even days before anyone has bothered to respond to you and all you have got is an automated response. Obviously once you open a support ticket, you do get an automated response saying your query has been received but I always look out for in how much time do I receive the second automated response telling me a member of the support staff has checked your query and replied to it. That shows the competence level of the web hosting company and how much they actually care about their customers. In conclusion, whether you are looking for a web hosting service for your new website or are looking to transfer web hosts, make sure you check whether the service offers a 1 hour support guarantee on their website. Don't be fooled with offers of web space, email accounts or even uptime guarantees. It's the support that will make the big difference in your web hosting experience.
View Replies!
View Related
Apache Crashes (or Does It?) Every Hour Or So
I've been trying to see whats going on with this server for a few days now but am unable to resolve the issue. This is a 3 server setup. One is a mail server, another a mysql server and the host server. The apache on the host has plenty of ram (8 gigs) and it is currently under 5 gigs. The site is mainly a social networking site. Now the apache would crash at times like 1:16, 2:17, 3:16, 4:18; basically in 1 hour intervals. Now it doesn't always crash every hour. Sometimes it might go up to 5 hours and may crash at say 8:50 Well it turns out that the mail server new mass mailing method has some sort of effect on the host server. This is what happens. 1.) Host has a ton of apache processes up and running (site is fine and dandy). 2.) Mail server is about to launch its barrage email (load about .5) 3.) Then all of the apache processes stopped appearing on my top (nobody is able to browse the site at this point). 4.) after a few minutes the apache processes reappear and the site loads again. 5.) Mail server is now mass mailing and its loads reaches up to 4. 6.) WHM emails me that apache was down and it restarted the service. Here is the interesting thing about this. First of all I found out that the apache processes were actually not gone. They were somehow suppressed. For example during this freeze moment, if I run a "ps aux" I see that all the apache process are running yet they are not using any cpu or ram (which is why I don't see them on top). Now if I were to do a "service httpd restart" during this moment, it will restart but will still be frozen until its set time. When the site is accessible again, that is when the mail starts leaving from the mail server. The owner thinks this is related, and I tend to agree. The only problem is that I have no clue as to what is going on. Apache does not leave any error logs period. Nothing in messages or in exim logs. For a while I thought it might be lfd killing the apache but I was wrong. Nothing informative on the lfd logs either. Could it be perhaps a bind issue? Somehow the mail server takes over the host system before its launch? I'm posting this in the hope that some of the techies here and give me some hints and directions where I can find an answer. Perhaps someone who read this thread has seen this kind of issue before.
View Replies!
View Related
Limiting PHP Emails Per Hour
On an cPanel + RHEL 5.3 box at WHM - Tweak Settings, I activated "The maximum each domain can send out per hour (0 is unlimited)" and set that value to "300". But, it seems that this limit is only if the user is sending using webmail or an email client, right now a joomla website is sending much more than 300 mails per hour, but it's using php to send the mails. My question, how can I limit emails per hour on each domain while sending from php? Code: 29457 username 20 0 29724 13m 5848 R 10.2 0.2 0:00.10 /usr/bin/php /home/username/public_html/index.php
View Replies!
View Related
100's Of Spam Emails Per Hour
I'm getting literally about 100 of these per hour easy in whm > mail queue! Where is it coming from and how do I stop this? 1JBOml-0008CW-Fz-H mailnull 47 12 <> 1199600103 0 -ident mailnull -received_protocol local -body_linecount 33 -max_received_linelength 115 -allow_unqualified_recipient -allow_unqualified_sender -localerror XX 1 root@server.domain.com 154P Received: from mailnull by server.domain.com with local (Exim 4.68) id 1JBOml-0008CW-Fz for root@server.domain.com; Sun, 06 Jan 2008 00:15:03 -0600 038 X-Failed-Recipients: admin@domain.com 029 Auto-Submitted: auto-replied 063F From: Mail Delivery System <Mailer-Daemon@server.domain.com> 029T To: root@server.domain.com 059 Subject: Mail delivery failed: returning message to sender 052I Message-Id: <E1JBOml-0008CW-Fz@server.domain.com> 038 Date: Sun, 06 Jan 2008 00:15:03 -0600 1JBOml-0008CW-Fz-D This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed: admin@domain.com SMTP error from remote mail server after RCPT TO:<admin@domain.com>: host sentry.domainbank.com [64.85.73.28]: 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1) ------ This is a copy of the message, including all the headers. ------ Return-path: <root@server.domain.com> Received: from root by server.domain.com with local (Exim 4.68) (envelope-from <root@server.domain.com>) id 1JBOmk-0008CJ-To for admin@domain.com; Sun, 06 Jan 2008 00:15:02 -0600 To: admin@domain.com Subject: Services(2) failed From: monitor@domain.com Message-Id: <E1JBOmk-0008CJ-To@server.domain.com> Date: Sun, 06 Jan 2008 00:15:02 -0600 Address:domain.com Following services are down: SSH(22) MySQL(3306)
View Replies!
View Related
Setting Maximum Emails Per Hour In WHM
I know there's a option in the WHM that says "The maximum each domain can send out per hour (0 is unlimited" and it affects all the accounts under the same server, but, Is there any possibility to configure the WHM/cPanel to give different values to each client?
View Replies!
View Related
More Than 5 Hour Downtime For Softlayer Cloud Computing
Today, The Cloudlayer Instance we are having with Softlayer has faced a major downtime. At the time of writing this post, the service is down (5.30 hour already). The support staff hasn't provided much information about the reason for downtime. They say, the power failed in server room #5 for Dallas. The power was restored soon, but i don't see the CloudLayer Instance coming up even after 5 hours. Having account with Softlayer for more than 2.5 years, i have been very happy with their team and their network, but more than 5 hour downtime and still the support not offering any ETA, is making me think of shifting to some other provider. I am not much aware of Cloud Computing Instances and how much time they would need to come back online. But, i don't think it should take so much of time. I am still waiting for the service to be restored. I guess some other members on WHT may have also faced the trouble today.
View Replies!
View Related
Is 1 Hour Downtime Required For Installing Firewall?
Is 1 hour network reconfiguration downtime unavoidable with every Hosting Provider? Today I got explanation from RackSpace why they needed to bring my server down for an hour when they install Hardware firewall (see below). Could you comment if it's really necessary have 1 hour downtime in that case? Here's how I see appropriate maintenance: - Install and plug Firewall's power and external network cable without touching production server (no downtime yet). - Connect test machine behind firewall and test if firewall works properly (no downtime yet). - Switch network cable so it connects Production server to Hardware Firewall (20 seconds downtime). Why couldn't the maintenance be done that way? Anyway, here's response from RackSpace: ======= I have answered questions 1-3 below and will be passing this ticket over to our network technicians in order to get questions 4-6 answered for you. 1) Why installing hardware firewall brought my server down by almost an hour? When working this type of maintenance to add firewall: 1. Mark ticket In Progress 2. Grab parts for maintenance 3. Put Public comment in ticket we are starting maintenance. 4. Log into server(at console or remotely). 5. Verify if other users are logged in. 5a. If users are logged in, we send them a message stating server is shutting down in X minutes. 5b. If no users are logged in, go to next step. 6. Shut server down. 7. Open the server. 8. Remove back plate from an open PCI slot. 9. Install PIX 501 card into PCI slot. 10. Screw PIX 501 power supply card in place. 11. Find open Powersupply connection and connect it to back of PIX 501 power card, since this will provide power for firewall. 12. Put side panel back on whitebox. 13. Install the firewall below the rack. We have to mount it to the rack the whitebox sits on. These are racked underneath the rack for each whitebox server. We use zip ties to hold it to the rack in place. 14. Put server back on rack. 15. Plug in power and network connections. 16. Connect console to server and verify server boots up fine. 17. Log in at console and verify it can ping NAT Gateway IP(192.168.100.1) 18. Verify if server can pint out to google or some other site 19. If we are unable to ping out or ping gateway IP, we will have to double check network connections and work with NetSec to resolve issues. This could be port speed issue since the PIX 501 firewalls require the port speed to be at 10Mb. 20. If server is pinging out fine, DCOPS will come back into DCOPS room and verify we can get to server remotely. 21. If server is not remotely accessible, we will have to go back to console and see if they are running any firewall software that is preventing access or if port RDP is using is changed. 21. Change status of server to online complete. 22. Send Public comment stating server is back online. 23. Close ticket. 24. Route Contract Received ticket for firewall over to Network Security to have them online firewall. Downtime was necessary to install PIX 501 power card since the firewall gets power through this card. 2) How 1 hour downtime goes together with "Zero downtime" RackSpace slogan? Zero downtime means that your network will be up 100% of the time. However when upgrading your configuration (adding a firewall) there needs to be a certain amount of downtime in order to add this firewall to your configuration. Whenever a hardware upgrade is made there will be hardware downtime involved. The amount of time will vary depending on the hardware upgrade. 3) Why the length of downtime was communicated to me only at the beginning of downtime, and not some time prior to that? As we spoke about over the phone today I apologized for XXX not conveying the amount of downtime you will have during this maintenance. I have already spoken with him about this and moving forward if there are any maintenances that need to take place on your account your new Account Manager YYY and XXX will make sure and go into exact detail about the amount of downtime you should expect. Consider this mis-communication taken care of from now on. ======= Is it really necessary to shut down production server just to plug Hardware Firewall power?
View Replies!
View Related
PeachyDandy - 6 Hour Review Of A Not So Dandy Host
I had purchased a small plan from then in order to keep some of my websites active while my servers were in use during the time shortly after selling my web host. Well about 6 hours after purchasing a plan, I received an offer from a friend to use some space on his dedicated server for the time being. Well I prompty cancelled my account with PeachyDandy and that is when the trouble started. I used the Cancellation form and promptly opened a ticket because I had not received a verification of the cancellation. I also requested a refund since I hadn't even uploaded anything to there servers yet. Here are the replies I received: Hello, You must submit a cancellation request by logging into your account, selecting the hosting service and clicking on the cancellation button and providing a valid reason for refund. Ok, so I had messed up by opening a ticket... but I needed to provide a valid reason for the refund? This is a great contrast to what they state on their frontpage: [url] So after I receive the e-mail verification about the cancellation I reply with this: Sorry to be a bother but do I need to open a seperate ticket to request the refund or will it be processed soon? To which they respond: You were suppose to submit a request for refund in your cancellation request. What is your reason for requesting money back / cancellation? Me again: My cancellation was submitted on 01/03/2009 @ 00:22. I included the refund request in there as well as the reason I believe. I am cancelling because I obtained a free VPS from my friend because I was unable to host all of my websites on your service. Thank you. Then I receive this: Hello, We have reviewed your cancellation request for a refund which states you are getting a free VPS from a friend. This is not grounds for a refund and furthermore we are aware of you using our hosting as a reseller form and now selling your clients. This is prohibited unless you were authorized as a resell user. WHAT? I don't mind the first part (not grounds for a refund with a no questions asked refund policy?) but the second part is the reason I am posting this. I was apparently hosting all 16 of my clients that I sold on January 1st to UmbraHosting on an account with 400MB of disk space and 4GB of bandwidth... BTW here are the screenshots of the 16 clients not including my websites: Disk Space ([url]and Bandwidth [url] My final reply to them to keep with consistency: What do you mean using it as a reseller? I only had an account for less than 6 hours before asking for a refund. If you check the bandwidth usage I never even uploaded any files. I sold my clients on January 1st, I placed an order for your plan a day after selling my company. And as for your refund policy: "45-day money back guarantee - no questions asked", this is also false. I was expecting something a little more professional. I definately feel better now that this is out in the open because I had felt that I was calm and collected with not a bit of hostility towards them. I hope this thread was worth the $2.75 to them.
View Replies!
View Related
WHM Limit On # Of Emails Per Domain Per Hour
My server currently has 500 set for this parameter. However, I have some scripts that send out reminders and the number of emails will certainly exceed this limit. So this leads to some questions... What will happen if my scripts try to send out more than the limit? What happens when the limit is exceeded? Do the scripts "crash", or do they just keep running? Do the "over quota" emails just get discarded or do they get queued? How does this affect performance? Or maybe it doesn't? Does the email queue get clogged up if it has too many emails? What could be bad about increasing the limit - say to 2000? Would this create performance problems for my server? I have a couple sites that I'm hosting and I would prefer to keep the limit of 500. However, how can I increase the limit for my own scripts (domains)? Or, perhaps this option has nothing to do with performance and it's strictly in place as a security measure to prevent hosted accounts from spamming. I searched for information concerning this issue and couldn't find anything. The cPanel/WHM forum doesn't say what the parameter is for, just how to set it.
View Replies!
View Related
Can A Vps Handel 6000 Email/hour
Is it possible for a vps to queue 6000 outgoing emails and send them in just one hour, and deal with the load/io the returning emai l processing is going to generate (bounced, refused, inbox-full emails need to be removed from the list). this is a daily joke service and it needs to send 6000 emails at a certain hour every day, and process returning emails for anti spam compliance and health of the list.
View Replies!
View Related
Windows 2003 Clock Was Right, Now It Slow An Hour
I am running windows 2003, and I patched it with the timezone windows update, everything was fine, but when I looked today, the clock is one hour slow. But when I run my php scripts, it shows the time being correct. I thought php grabbed the time from the system? Perhaps this is just a bug with the clock, and the internal system time is correct? It is the only thing I can think of.
View Replies!
View Related
Pure-ftpd + Filezilla = 1 Hour Time Offset
Timezone on server is set to GMT -5 EDT My timezone is GMT -5 EDT Yet filezilla 3.x ftp client connected to my server's pure-ftpd server offsets time on transferred files by an hour, saying now at 8:52 that the file was uploaded to the server at 9:52. WHM and uptime, etc. at the SSH prompt show server time correct, matching my own time. But connecting via filezilla 3 I get: Status: Calculating timezone offset of server... Command:MDTM .htaccess Response:213 20080208013750 Status:Timezone offsets: Server: -18000 seconds. Local: -14400 seconds. Difference: 3600 seconds. Status: Directory listing successful If I connect locally to pure-ftp via the server shell ftp, I get Connected to localhost. 220---------- Welcome to Pure-FTPd [TLS] ---------- 220-You are user number 1 of 50 allowed. 220-Local time is now 20:52. Server port: 21. which matches $ uptime 20:52:28 The filezilla forums however indicate the problem is due to some "non-standards compliant setup" of my ftp server. [url] Quote: As required in RFC 3659 [url]FileZilla assumed MDTM returns timestamps in UTC. Based on the timestamp return in the LIST reply and the corresponding MDTM reply, it calculates the timezone offset of the server. Obviously this fails on broken or misconfigured servers. I can assure you that it works fine on all standards-compliant servers. Is there something I can tweak with pure-ftpd, or is this a Filezilla 3 bug?
View Replies!
View Related
Sendmail - SMTP Auth & Max Emails Per Hour
I have Cpanel, with the "Prevent Nobody from sending emails" in the WHM>Tweak Settings enabled. I want to force sendmail to use SMPT auth.. so that all mails sent are sent via SMPT and an authenticated POP user. I guess this will help in limiting the "The maximum each domain can send out per hour" setting.
View Replies!
View Related
Installed MySQL In /usr/local/mysql But Error In /var/lib/mysql
I installed the MySQL binary packages in /usr/local/mysql/ after removing the MySQL RPM package. MySQL is functioning when I executed /usr/local/mysql/bin/safe_mysqld. I reinstalled MySQL before I installed PHP. When I used a PHP script to access a MySQL database, it outputs an error: Code: Warning: mysqli::mysqli() [function.mysqli-mysqli]: (HY000/2002): can't connect to local mysql server through socket /var/lib/mysql/mysql.sock in index.php on line 2 However, I installed MySQL in /usr/local/mysql, not in /var/lib/mysql. How do I fix MySQL?
View Replies!
View Related
RSync
I made some data backup on one of the backup servers using rsync. How can I restore it to the new server now? My account is ready on new vps and all I need is pull the data back from backup server to new vps account. I used this command previously Quote: rsync -avz -e ssh /home/user1 backupuser@backup.server.com:user1
View Replies!
View Related
Anything Better Then Rsync
Is there anything better then rsync to replicate files (twice a day) on servers located in seperate datacenters? Looking for more of a free to cheap solution though will also be interested in the higher end solutions later on.
View Replies!
View Related
Cpanel Or Rsync?
I am using BQbackup to auto backup my CPanel VPS and was wondering whether it is best to use CPanel's own backup service which automatically backs-up the vps daily or should I use the rsync script that bqbackup provides? Which is easier to restore and more reliable?
View Replies!
View Related
RSYNC Tutorials?
Looking for an RSYNC tutorial, something that focuses on backing http data, exporting the databases then transferring offsite to a receiving rsync server once a week. Something that's understandable and logical would be great, happy to work through over the next week and continue more in depth with it.
View Replies!
View Related
Rsync Instructions
I have been trying to setup rsync on my server and following these instructions http://www.bqbackup.com/setup.html The problem is I keep getting errors. On this step, ssh-keygen -t rsa -N I edited it and did ssh-keygen -t rsa --N becauseI got an error saying it need the '--' before the N. So after getting through that part, I got these questions asked Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: I left the passphrase empty, and then when it asked where to save to, I just typed in 'rsa'. Then it gave me some fingerprint. Then I get to the step, # scp ~/.ssh/id_rsa.pub yourusername@yourusername.bqbackup.com:keys/server1 # ssh yourusername@yourusername.bqbackup.com mergekeys But I get errors saying -bash: cat~/.ssh/id_rsa.pub: No such file or directory I dont get what I'm doing wrong. If somebody doesnt mind, can you please re-write the steps on getting this working, or maybe tell me where I am going wrong if the tutorial is correct?
View Replies!
View Related
Update Rsync
Current, 2.6.3 came with my centos 4.4 cpanel server, I tried updating it to latest 2.6.9. However, when I type "rsync" it's pointing to 2.6.3 How can I remove the old version or reinstall over it?
View Replies!
View Related
Rsync And Cron
I have a bit of a strange problem, I have an rsync command setup in the servers crontab and from the cron log it show it ran the command but the files don't copy to the backup server. If I take the rsync syntax and run it manually all the files copy across with no errors, but I can't figure out why the cronjob doesn't work properly.
View Replies!
View Related
Rsync And Passphrase
I'm trying to configure rsync to backup my vps data to an rsync backup provider. The problem that I am having is that each time I try to run rsync it prompts for the passphrase. I did some reading and it seems (and maybe this is not correct), that in order to do unattended rsync (e.g. using cron), that you need to use a key that doesn't have a passphrase generated. If this is the case, is it true that it's not a good idea to use a key that doesn't have a passphrase?
View Replies!
View Related
RSync-over-SSH
i have two srevers one is Dedicated Server and the secound is for backup . well , i login to the backup server and creat ftp account . i wanna make the server save the weekly backup . the backup path is /backup the copmany of the backup server said " To RSync your data to your backup server, type: "rsync -av --progress -e ssh @" this will put all the files in your home directory..." i dont know how to use this command on the Dedicated Server .
View Replies!
View Related
Setting Up Rsync
I got one of those cheap $10 servers from hostmds to use to backup my vps. Know I just need to know how do I setup rsync to backup my vps nightly? Any links to good guides to do this would be great. I looked on google, but am hoping someobody knows a guide that is simple to follow.
View Replies!
View Related
Rsync Setup
I am in the process of setting up a cronjob so I can run rsync automatically every day. But I want to know is it ok to exclude the following folders? /home/.cpcpan/ /home/cpeasyapache/ /home/src/ <!--- This folder I made to put files in before I install /home/MySQL-install/ /home/.cpan/ As from what I understand cPanel/WHM makes these folders, and there no user data in these folders
View Replies!
View Related
Rsync Copy
I have wrote a small script which copies file names which has name as *default* from backup to users main folder. It works fine with one folder but doesn't copy files from sub-folders. it works with all the sub-folders as well? HTML Code: #!/bin/bash for i in $(ls /var/cpanel/users) do rsync -vrplogDtH /backup/cpbackup/weekly/$i/homedir/public_html/*default* /home/$i/public_html chown -R $i.$i /home/$i/public_html/*default* done
View Replies!
View Related
Rsync Between Two Different Server
i have two differnt server at two differnt datacenters,with same contant,runing under subdomain eg main domain is domain.com and subdomain is sub.domain.com both are same site,i used this to reduce server load and share request,but the problem iam haveing when update any stuff i need to update on both server it bit diffcult any way to update contant via rsync between the two servers?
View Replies!
View Related
How To Backup To Your PC Using Rsync
I use bqbackup.com in addition to ServInt's backup. The ServInt backup is inaccessible to me and can be restored only by their NoC. Is there a way for me to download the backup files from bqbackup.com to my PC? I am using Win XP Pro. I backup the entire VPS, but I want to be downloading only the changes made each day after the initial download to my PC.
View Replies!
View Related
Rsync Notification
I'm running rsync in cron jobs. is there a way to be notified via email when the job is done plus the log? I'd really like to know how long it's taking to complete and whether it's running properly or not.
View Replies!
View Related
Rsync Recovery
I am trying to recover some backups on the server by rsync the home dir from BQbackup to my server. I deleted 1 file to see whether it actually works. I executing this command on the server: rsync -avz -e ssh username@username.bqbackup.com:path.to.home.dir /home I saw that it downloaded the file I deleted, however after checking on FTP if the file was recovered it actually wasn't. Is there something wrong in the command I used as it seems that it is not recovering any files.
View Replies!
View Related
Rsync / Backup
I am setting up a mirror server to kick on in the event my main server fails and I need some help with syncing the two. It is my understanding I can use rsync to mirror the two. But, will that cover everything (ie. database, mail, etc) or only files?
View Replies!
View Related
Setting Up Rsync
im trying to setup rsync to mirror my FreeBSD box to my CentOS box. I have rsync moving everything in /etc/, /usr/, /home/. The rsync daemon is hard to get running on CentOS (need to make startup scripts and all) so I was wondering if I can just make a user on the centOS box for rsync:rsync and transfer it as root fromt he freeBSD box to the centOS box using ssh keys. Can I do this? Someone said this won't be possible because rsync:rsync will not be able to read the files owned by root:wheel. Is this true?
View Replies!
View Related
Using Rsync And Ftp
Does rsync required to be installed on both servers for it to work? Can rsync work with ftp only on the remote server? Can you guys list some typical rsync shell command to help me get started...
View Replies!
View Related
|
TRACKER
