Apache Crashes (or Does It?) Every Hour Or So

Dec 16, 2007

I've been trying to see whats going on with this server for a few days now but am unable to resolve the issue.

This is a 3 server setup. One is a mail server, another a mysql server and the host server. The apache on the host has plenty of ram (8 gigs) and it is currently under 5 gigs. The site is mainly a social networking site.

Now the apache would crash at times like 1:16, 2:17, 3:16, 4:18; basically in 1 hour intervals. Now it doesn't always crash every hour. Sometimes it might go up to 5 hours and may crash at say 8:50

Well it turns out that the mail server new mass mailing method has some sort of effect on the host server.

This is what happens.

1.) Host has a ton of apache processes up and running (site is fine and dandy).

2.) Mail server is about to launch its barrage email (load about .5)

3.) Then all of the apache processes stopped appearing on my top (nobody is able to browse the site at this point).

4.) after a few minutes the apache processes reappear and the site loads again.

5.) Mail server is now mass mailing and its loads reaches up to 4.

6.) WHM emails me that apache was down and it restarted the service.

Here is the interesting thing about this. First of all I found out that the apache processes were actually not gone. They were somehow suppressed. For example during this freeze moment, if I run a "ps aux" I see that all the apache process are running yet they are not using any cpu or ram (which is why I don't see them on top). Now if I were to do a "service httpd restart" during this moment, it will restart but will still be frozen until its set time.

When the site is accessible again, that is when the mail starts leaving from the mail server.

The owner thinks this is related, and I tend to agree.

The only problem is that I have no clue as to what is going on. Apache does not leave any error logs period. Nothing in messages or in exim logs. For a while I thought it might be lfd killing the apache but I was wrong. Nothing informative on the lfd logs either.

Could it be perhaps a bind issue? Somehow the mail server takes over the host system before its launch?

I'm posting this in the hope that some of the techies here and give me some hints and directions where I can find an answer. Perhaps someone who read this thread has seen this kind of issue before.

View 13 Replies


ADVERTISEMENT

Apache Crashes Daily

Apr 21, 2009

I am running a dedicated server.

My apache crashes daily and I am investigating the cause of it.

I have found this strange message in my apache error_log....

View 12 Replies View Related

Apache Crashes When Trying To Upgrade

May 20, 2008

I tried to upgrade from apache 2.0.51 to 2.0.63 but it crashes as soon as new version is started and httpd is reloaded.

here is a part of the log

[Fri Apr 25 10:57:46 2008] [notice] Apache/2.0.63 (Unix) configured -- resuming normal operations
Segmentation Fault in 3642, waiting for debugger
Segmentation Fault in 3697, waiting for debugger
Segmentation Fault in 3696, waiting for debugger
[Fri Apr 25 10:58:11 2008] [notice] caught SIGTERM, shutting down
[Fri Apr 25 10:58:22 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Fri Apr 25 10:58:22 2008] [notice] mod_security/1.9.4 configured
[Fri Apr 25 10:58:22 2008] [notice] Digest: generating secret for digest authentication ...
[Fri Apr 25 10:58:22 2008] [notice] Digest: done
[Fri Apr 25 10:58:22 2008] [notice] LDAP: Built with OpenLDAP LDAP SDK
[Fri Apr 25 10:58:22 2008] [notice] LDAP: SSL support unavailable
[Fri Apr 25 10:58:23 2008] [notice] Apache/2.0.63 (Unix) configured -- resuming normal operations
Segmentation Fault in 5422, waiting for debugger
Segmentation Fault in 5421, waiting for debugger
Segmentation Fault in 5452, waiting for debugger
Segmentation Fault in 5461, waiting for debugger
Segmentation Fault in 5451, waiting for debugger
Segmentation Fault in 5466, waiting for debugger
Segmentation Fault in 5465, waiting for debugger
Segmentation Fault in 7363, waiting for debugger
Segmentation Fault in 5435, waiting for debugger
Segmentation Fault in 5906, waiting for debugger
Segmentation Fault in 7251, waiting for debugger
Segmentation Fault in 6041, waiting for debugger
Segmentation Fault in 7723, waiting for debugger
Segmentation Fault in 7986, waiting for debugger
Segmentation Fault in 9659, waiting for debugger
Segmentation Fault in 9643, waiting for debugger
Segmentation Fault in 9361, waiting for debugger
Segmentation Fault in 9744, waiting for debugger
Segmentation Fault in 9543, waiting for debugger
Segmentation Fault in 9879, waiting for debugger
Segmentation Fault in 9794, waiting for debugger
Segmentation Fault in 9758, waiting for debugger
[Fri Apr 25 11:01:10 2008] [notice] caught SIGTERM, shutting down
[Fri Apr 25 11:01:12 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Fri Apr 25 11:01:12 2008] [notice] mod_security/1.9.4 configured
[Fri Apr 25 11:01:12 2008] [notice] Digest: generating secret for digest authentication ...
[Fri Apr 25 11:01:12 2008] [notice] Digest: done
[Fri Apr 25 11:01:12 2008] [notice] LDAP: Built with OpenLDAP LDAP SDK
[Fri Apr 25 11:01:12 2008] [notice] LDAP: SSL support unavailable
[Fri Apr 25 11:01:13 2008] [notice] Apache/2.0.63 (Unix) configured -- resuming normal operations
Segmentation Fault in 11634, waiting for debugger
Segmentation Fault in 11635, waiting for debugger
Segmentation Fault in 11661, waiting for debugger
Segmentation Fault in 11695, waiting for debugger
Segmentation Fault in 11760, waiting for debugger
Segmentation Fault in 11723, waiting for debugger
Segmentation Fault in 11694, waiting for debugger
Segmentation Fault in 11837, waiting for debugger
Segmentation Fault in 11812, waiting for debugger
Segmentation Fault in 12022, waiting for debugger
Segmentation Fault in 11848, waiting for debugger
Segmentation Fault in 11879, waiting for debugger
Segmentation Fault in 13342, waiting for debugger
Segmentation Fault in 12062, waiting for debugger
Segmentation Fault in 13428, waiting for debugger
Segmentation Fault in 13569, waiting for debugger
Segmentation Fault in 11849, waiting for debugger
Segmentation Fault in 13881, waiting for debugger
Segmentation Fault in 13380, waiting for debugger
[Fri Apr 25 11:02:27 2008] [notice] caught SIGTERM, shutting down
[Fri Apr 25 11:02:29 2008] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Fri Apr 25 11:02:29 2008] [notice] mod_security/1.9.4 configured
[Fri Apr 25 11:02:29 2008] [notice] Digest: generating secret for digest authentication ...
[Fri Apr 25 11:02:29 2008] [notice] Digest: done
[Fri Apr 25 11:02:29 2008] [notice] LDAP: Built with OpenLDAP LDAP SDK
[Fri Apr 25 11:02:29 2008] [notice] LDAP: SSL support unavailable
[Fri Apr 25 11:02:30 2008] [notice] Apache/2.0.63 (Unix) configured -- resuming normal operations
Segmentation Fault in 14123, waiting for debugger
Segmentation Fault in 14154, waiting for debugger
Segmentation Fault in 14156, waiting for debugger
Segmentation Fault in 14273, waiting for debugger
Segmentation Fault in 14114, waiting for debugger
Segmentation Fault in 14308, waiting for debugger
Segmentation Fault in 14316, waiting for debugger
Segmentation Fault in 14274, waiting for debugger
Segmentation Fault in 14315, waiting for debugger
Segmentation Fault in 15562, waiting for debugger
Segmentation Fault in 14113, waiting for debugger
Segmentation Fault in 15583, waiting for debugger
Segmentation Fault in 15615, waiting for debugger
Segmentation Fault in 15616, waiting for debugger
Segmentation Fault in 15584, waiting for debugger
Segmentation Fault in 15637, waiting for debugger
Segmentation Fault in 15631, waiting for debugger
Segmentation Fault in 15614, waiting for debugger
Segmentation Fault in 16332, waiting for debugger
Segmentation Fault in 14262, waiting for debugger
Segmentation Fault in 17504, waiting for debugger
Segmentation Fault in 15638, waiting for debugger
Segmentation Fault in 17515, waiting for debugger
Segmentation Fault in 18105, waiting for debugger
Segmentation Fault in 17516, waiting for debugger
Segmentation Fault in 18163, waiting for debugger
Segmentation Fault in 18175, waiting for debugger
Segmentation Fault in 18177, waiting for debugger
Segmentation Fault in 18178, waiting for debugger
Segmentation Fault in 18149, waiting for debugger
Segmentation Fault in 19931, waiting for debugger
Segmentation Fault in 20098, waiting for debugger
Segmentation Fault in 18176, waiting for debugger

I am on VPS and myself am quite a noob in this. Upgrade is performed by the support people.

If you guys can help please explain in lame terms
Let me know if you need some specific info about the system.

I was suggested that some modules might not be upgraded yet and they cause the crash, so to fix I should remove modules one by one from httpd config until get to the problematic one.

View 5 Replies View Related

Apache Crashes And Does Not Restart; Every Day

Jun 27, 2007

I am running CPanel and WHM, and every morning, I need to restart apache manually in order to work. Then it works for the whole day. It crashes I guess, but I don't know why. What logs do I need to check?

View 9 Replies View Related

Apache :: How To Examine Server Crashes

Mar 7, 2013

I'm using mod_perl 2.0.7 on Windows with Apache 2.2.23. I got Apache from Apachelounge, and compiled mod_perl and perl 5.16.2 myself using Visual Studio 2008. I'm using a 32-bit Windows Vista.

Pretty frequently my app (which works just fine on Linux) makes Apache crash. If I perform 500 requests with Apache Bench, I see this:

Benchmarking localhost (be patient)
Completed 100 requests
Completed 200 requests
Completed 300 requests
apr_socket_recv: An existing connection was forcibly closed by the
remote host. (730054)
Total of 338 requests completed

In the apache error log I see apache is restarting, but this results in some HTTP 500 errors that make the apache-bench results fail. When using a web browser, I also get these http 500 errors.

If I run the application using native CGI (i.e. I turn off mod_perl) I do not see crashes but of course it is *very* slow.

How can I find out what makes apache/mod_perl crash?

I asked the same on the modperl mailing lists, there they said I needed the symbol files for apache (*.pdb files). Where are these?

View 3 Replies View Related

Apache :: Service With Automatic Start Crashes

Nov 22, 2013

I encountered a strange problem when installing apache 2.2 or 2.4 as a service and set the service to be automaticly started.On restart of windows, apache service crashes with an access violation.

View 3 Replies View Related

Apache :: Rotatelogs Crashes When Used As Piped Logging With Httpd

Apr 16, 2015

I've got a problem at a local customer with rotatelogs.exe and the current release of Apache HTTPD 2.4.12.

I've downloaded the 64-bit zip-file (VC11) and installed the VC11 vcredist in both 32- and 64-bit version.

The project is to upgrade apache 2.2 to apache 2.4. I've adjusted the configuration and added rotatelogs for log rotation for error_log and access_log.

The configuration is 100% correct, I can copy the line to cmd.exe and it runs correctly.

Variables are set in global environment, APACHE_HOME is set with "/" instead of "" to get sure rotatelogs.exe is found.

View 2 Replies View Related

Apache And Mysql Going Down Every Half Hour

May 10, 2008

I am facing an very typical problem, when I start apache and mysql both my site works good for half and hour or so then start getting slower and slower to load and after sometime becomes completely inactive. Then i have to restart both mysql and apache to get my site back.

When sites became inactive I have to restart only apache to see it back.Restarting only mysql dont help at that time.

Apache runs without any problem when running alone .(mysql stoped.)

View 7 Replies View Related

CPanel Crashes My Server

Aug 8, 2008

I have remote uptime tracking on my server, and I am regularly getting text messages and emails regarding my server going down. This in itself isn't odd, however the fact is, everytime the problem is cPanel.

I log into my PC and find an email from my server and it contains the following;

Quote:

cpsrvd failed @ Thu Aug 7 19:11:17 2008. A restart was attempted automagically.

Failure Reason: Unable to connect to port 2086

what's causing this? It's on a VPS and the main server hasn't been down once, but this VPS constantly goes offline, at least once a day...

View 10 Replies View Related

Got Tired From My Server Crashes

Mar 2, 2008

I have a server ($200)

I got tired from these frequent crashes.

I do not know how companies promising 99% uptime while customers do not get 80% uptime.

Just see this snapshot

Every week my server is down at least twice.

I have 7000-8000 daily uniques.

I really got tired.

Got tired from life also.

View 14 Replies View Related

Which Logs To Check If Dns Crashes

Mar 30, 2008

I have a VPS and almost once per day PIM has to restart the DNS service. I think it is because of the high volume of sites on it.

Could someone point me to which log files I could have a look at and maybe get a clue why it crashes?

View 3 Replies View Related

Quotaon Nearly Crashes Server

Jan 10, 2008

I have seen this on a few different cpanel servers. Mainly seems an issue with some kernels but I have a server at softlayer and it seems it does it after a server has been up a few days.

At first I thought this was just an issue with grsecurity kernels but seems its an issue with any kernel on it after it been up a few days. On other servers though I have been able to change kernel versions and fix it. I suppose this may be related to disk space used as well.

Problem with my softlayer server is that teh tech didnt follow my partitong directions and installed everything in one slab / so I guess when you edit or add quota it has to scan the entire disk.

I had recently rebooted that server into a 2.6.29-grsecurity kernel and it fixed the issue but tonight I was messing around and it started all over. Not as bad as before but still around 305 minutes of totally lagging the server.

My mount options are
LABEL=/ / ext3 defaults,noatime,usrquota 1 1

Seems to do the same with or without noatime.

Has anyone ran into this issue or know any solution?

os is centos5 64 bit

View 2 Replies View Related

How To Prevent OOM (Out Of Memory) Crashes

Aug 19, 2008

I have a colocated server with the following specs:

Intel Core 2 Quad Q6600 2.4Ghz
4GB RAM
400GB SATA Drive

I have a problem every few days, the server keeps hanging up and giving an "Out of Memory" message and SSH just hangs and doesn't connect. Every time i have to call out a tech to manually reboot it.

Is there a setting i can change to make SSH connect even when it is out of memory, or anything that can prevent it happening?

View 6 Replies View Related

Server Crashes Every 600 Seconds

Feb 13, 2007

Today, I put a new server on our racks.

Problem: the machine crashes exactly every 10 minutes. The crash occurs with no entry on the logs and with 0.00 load. It is as if someone take out the current every 10 minutes.

Here are the specs:

- 2 CPU Intel Xeon 2.0
- 8 Gb RAM ECC
- 2 x 250 Gb HDs

This machine needs plenty of current. I wonder if I am not going over the rack power quota. May be there is a system to allow overages for then 10 minutes, then it cut back the current to the rack quota.

View 2 Replies View Related

Server Crashes Around Same Time Each Day

Nov 26, 2007

I have to reboot this server each day. It seems to crash (or freeze if you call it) around 11:55 pm server time (central US). How do I trace the cause of this? I installed CSF / LFD in replacement of APF/BFD.

This is a centos 3.9 / cpanel 11 box.

crontab -e shows nothing out of the default ordinary

/var/log/messages shows this

Nov 23 19:14:00 server sshd(pam_unix)[29523]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:02 server sshd(pam_unix)[29533]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=gopher
Nov 23 19:14:02 server sshd(pam_unix)[29541]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=gopher
Nov 23 19:14:02 server sshd(pam_unix)[29553]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=gopher
Nov 23 19:14:02 server sshd(pam_unix)[29570]: check pass; user unknown
Nov 23 19:14:02 server sshd(pam_unix)[29570]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:05 server sshd(pam_unix)[29580]: check pass; user unknown
Nov 23 19:14:05 server sshd(pam_unix)[29580]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:08 server sshd(pam_unix)[29584]: check pass; user unknown
Nov 23 19:14:08 server sshd(pam_unix)[29584]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:11 server sshd(pam_unix)[29588]: check pass; user unknown
Nov 23 19:14:11 server sshd(pam_unix)[29588]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:13 server sshd(pam_unix)[29592]: check pass; user unknown
Nov 23 19:14:13 server sshd(pam_unix)[29592]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:16 server sshd(pam_unix)[29596]: check pass; user unknown
Nov 23 19:14:16 server sshd(pam_unix)[29596]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:19 server sshd(pam_unix)[29600]: check pass; user unknown
Nov 23 19:14:19 server sshd(pam_unix)[29600]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:22 server sshd(pam_unix)[29605]: check pass; user unknown
Nov 23 19:14:22 server sshd(pam_unix)[29605]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:25 server sshd(pam_unix)[29614]: check pass; user unknown
Nov 23 19:14:25 server sshd(pam_unix)[29614]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:27 server sshd(pam_unix)[29618]: check pass; user unknown
Nov 23 19:14:27 server sshd(pam_unix)[29618]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com
Nov 23 19:14:30 server sshd(pam_unix)[29622]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=mailnull
Nov 23 19:14:33 server sshd(pam_unix)[29631]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=nfsnobody
Nov 23 19:14:36 server sshd(pam_unix)[29635]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=rpcuser
Nov 23 19:14:38 server sshd(pam_unix)[29639]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=rpc
Nov 23 19:14:41 server sshd(pam_unix)[29643]: authentication failure; logname= uid=0 euid=0 tty=NODEVssh ruser= rhost=a2.f5.5646.static.theplanet.com user=gopher

View 3 Replies View Related

Strange Server Crashes

Apr 27, 2007

I got a new server (Debian Etch) and experienced 2 strange server crashes during the last month.

When it happends, I can ping my server, but I can not login and all services are down.

After reboot log files doesn't show anything unusual.

There are only 2 small html sites on this server with 10-20 visitors per day.

View 5 Replies View Related

MySQL Crashes: Might Be Because Of Memory

Jan 5, 2007

My mysql server keeps on crashing. I wonder if it is because of out of memory. Last week, I upgraded my memory from 2GB to 6GB and I executed the command "free" to check memory usage. It uses 5GB in memory usage and leave under 10,000k unuse. Do you think this might be the cause of weekly mysql crashes?

I only use the server for mysql, so it is a dedicated mysql server.

View 18 Replies View Related

[Interworx] My VPS Crashes After Making A Backup

Dec 8, 2008

I have a VPS with Linux and 128 MB RAM and the Control Panel is an Interworx one. Backups are made with SiteWorx (a panel within NodeWorx, and only visible one for Shared Host customers).

- The VPS is working properly the whole day;

- The content of my VPS (besides the necessary software) is a PHPBB 3.0.0 forum that is heavily visited. Its subject is World of Warcraft, a popular MMORPG;

- Making a backup is successful, and I am reported by the system that way by an e-mail which also reaches me;

- Shortly after that my VPS crashes and stays offline, until I can restart it or my webhost notices that it is offline. NodeWorx and SSH are inaccesible. As soon as I can access the SSH I can restart MySQL server and everything is working properly again.

I suspect that 128 MB RAM is too little for my VPS backups.

View 12 Replies View Related

Server Regularily Crashes And Goes Offline

Aug 24, 2008

I have a dedicated server with burst.net and it's been pretty good, well, it was, but more recently I've found it seems to be crashing every day, at least once. On the server I have created 2 VPS's, both have cPanel installed, however every day I am receiving emails from my server telling me that cPanel has crashed and the server has to have been rebooted, which seems odd.

I've contacted cPanel support before, numerous times now and everytime they tell me that they're looking into it, they update cPanel but the problem persists.

has anyone got any experience with this?

Server information:
2048MB Ram
2.8GHZ processor
centOS 5
hyperVM

Each VPS Has 1024mb ram assigned to it, and it doesn't seem to be a problem with ram that is causing it, because the VPS's never use more than 200MB of ram each. Each VPS was created in hyperVM with the "OpenVZ" type selected. Could there be a problem with my server, as in, hardware, or is this a software problem? Has anyone been through this experience before? I'm mighty confused about what's going on.

View 8 Replies View Related

Exim Mail Queue - Server Crashes

May 21, 2009

Today my server started to go off-line and each time i restarted it went down within couple minutes. So i looked into it and found that i had over 7000 emails in Exim Mail Queue. All of them are spam. I deleted them through WHM and now everything seems good again but....

My question is how can i check what caused this problem? Has one of my domains been compromised with and sending out spam? What can i do?

View 6 Replies View Related

Windows Application 2003 Crashes On RAID 5 Server, Can I Recover Data

Jun 12, 2007

Windows Application 2003 crashed on RAID 5 server, we tried to take the NTFS files from the hardrive and mount them on a knobix which was booted from a cdrom drive. Knopix could read the files but it was unable to mount them I guess for compatiblity reasons.

Is there anyway we can get a backup of that ntfs file and restore our data?

View 2 Replies View Related

Mysql 4.1 Max Per Hour

Sep 5, 2007

What is a good setting per user:

MAX_QUERIES_PER_HOUR count
MAX_UPDATES_PER_HOUR count
MAX_CONNECTIONS_PER_HOUR count

to avoid users hogging MYSQL 4.1

View 1 Replies View Related

How Many Emails Can Be Reasonably Sent Per Hour

May 16, 2007

I have a P4 2.8GHz Linux box with a Gig of RAM. How many emails per hour could I expect that this server can handle per hour? I would of course want that the server has enough horse power to handle visitors to the web sites.

This is sort of a followup to a previous thread that I started concerning the limit on # of emails per domain per hour. The box came with a [cPanel] default of 500 per hour. Can I expect for my server to be able to handle more than that? 1000? 2000? 10,000? Do I need a more powerful server? I hope not - I just don't have the budget.

[ FYI - The emails are legitimate and not spam. I am sending out email reminders of personal events and holidays to subscribers that enable this option. ]

View 3 Replies View Related

Pay Per Hour VPS That Accepts PayPal

Apr 8, 2009

Does anyone know of any pay-per-hour VPS/Cloud/Grid/Utility/whatever other buzzword services that accept PayPal, since I can't seem to find any around.

View 14 Replies View Related

Limiting PHP Emails Per Hour

Jul 29, 2009

On an cPanel + RHEL 5.3 box at WHM - Tweak Settings, I activated "The maximum each domain can send out per hour (0 is unlimited)" and set that value to "300".

But, it seems that this limit is only if the user is sending using webmail or an email client, right now a joomla website is sending much more than 300 mails per hour, but it's using php to send the mails.

My question, how can I limit emails per hour on each domain while sending from php?

Code:
29457 username 20 0 29724 13m 5848 R 10.2 0.2 0:00.10 /usr/bin/php /home/username/public_html/index.php

View 7 Replies View Related

Email Limits Per Hour

Apr 18, 2009

I have take some weeks ago a VPS with 40 giga space and 386mb dedicated ram and all is managed with WHM/Cpanel. I need to know how I must set the limit of sending email per hours...In fact I see all hosting company limit that to more less 500 email per hour. I know this limit depend of lot factor like number of account on server and activity or users...

I ask that because my users will have Joomla installed with a Newletter component and so something this component will be used for send monthly newletter...

Do you have some experience with that ? How have you set your email limit? How much users have you on your server?

Other question: If for example I set limit to 500 email per hours and a user send 1000 email...what happend to the 500 other email? It will be put on queue and send the next hours or it will be lost?

View 10 Replies View Related

Rsync Mysql Every Hour Or 2?

Jul 21, 2008

How would I go about backing up MySQL databases every hour or 2?

I think I read somewhere you shouldn't do a direct rsync as the tables would not be locked or something like that.

View 10 Replies View Related

100's Of Spam Emails Per Hour

Jan 6, 2008

I'm getting literally about 100 of these per hour easy in whm > mail queue! Where is it coming from and how do I stop this?

1JBOml-0008CW-Fz-H
mailnull 47 12
<>
1199600103 0
-ident mailnull
-received_protocol local
-body_linecount 33
-max_received_linelength 115
-allow_unqualified_recipient
-allow_unqualified_sender
-localerror
XX
1
root@server.domain.com

154P Received: from mailnull by server.domain.com with local (Exim 4.68)
id 1JBOml-0008CW-Fz
for root@server.domain.com; Sun, 06 Jan 2008 00:15:03 -0600
038 X-Failed-Recipients: admin@domain.com
029 Auto-Submitted: auto-replied
063F From: Mail Delivery System <Mailer-Daemon@server.domain.com>
029T To: root@server.domain.com
059 Subject: Mail delivery failed: returning message to sender
052I Message-Id: <E1JBOml-0008CW-Fz@server.domain.com>
038 Date: Sun, 06 Jan 2008 00:15:03 -0600

1JBOml-0008CW-Fz-D
This message was created automatically by mail delivery software.

A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:

admin@domain.com
SMTP error from remote mail server after RCPT TO:<admin@domain.com>:
host sentry.domainbank.com [64.85.73.28]: 553 sorry, that domain isn't in my list of allowed rcpthosts (#5.7.1)

------ This is a copy of the message, including all the headers. ------

Return-path: <root@server.domain.com>
Received: from root by server.domain.com with local (Exim 4.68)
(envelope-from <root@server.domain.com>)
id 1JBOmk-0008CJ-To
for admin@domain.com; Sun, 06 Jan 2008 00:15:02 -0600
To: admin@domain.com
Subject: Services(2) failed
From: monitor@domain.com
Message-Id: <E1JBOmk-0008CJ-To@server.domain.com>
Date: Sun, 06 Jan 2008 00:15:02 -0600

Address:domain.com

Following services are down:

SSH(22)
MySQL(3306)

View 5 Replies View Related

SingleHop - 12 Hour Review

Sep 18, 2008

after my LimeStoneNetworks fiasco, I decided to venture elsewhere. SingleHop.

I bought the server in the early afternoon hours, talked to a Chris over there via LiveChat, answered all of my pretty nutty questions, I was convinced!

So, Server was purchased, and was all set and ready to go before 5.

I had set up a test domain, finished with my DNS stuff, Mail, MySql and Cpanel / WHM main issues by 7PM.

8PM, Propagation decided to go quickly in my area, the site was LIVE.

8:30PM, tested PHP, MySql, Email...all checked out but email, however later I found out it was my dumba$$ and made a mistake with a zone entry.

10PM, everything's working, email, FTP, setting up new websites, adding clients, Billing, everything is working peachy!

10:30PM, took a nap, after feeling GREAT!

12:25PM, wokeup...still can't believe I'm almost done with almost all of my 14 domains!

Support:

First off, the LEAP panel over at singlehop is the greatest / coolest thing I've ever seen. (leap.singlehop.com).

You can purchase add-ons to your server, check your bandwidth useages, server details, buy a completely new server, manage (read and send tickets) all in this cool windows-ish panel that's smoking fast apparently coded in AJAX, it even includes a web-based SSH client so you don't need PuTTy...too cool! (By the way, Google's Chrome Browser LOVES this!)

I entered multiple tickets this evening just for figuring out things that I didn't know. There were NO issues with SingleHop setting up my box, etc.

Tickets were entered, and QUICKLY answered, maximum time thus far was 30minutes.

Server:

I have a E2200, 2gbs of ram, 5TBs of data, 100mbit link, Linux CentOS, Cpanel, blah blah blah. For an E2200, this thing's like a Fiat on steroids. I'll never make the mistake of getting a windows machine ever again. (I love my linux!)

It's based in Chicago, my present location (Connecticut) I ping it at 35-39ms) Plenty quick for me and the northeast

Things that made me go SingleHop instead of LiquidWeb (the two I was tearing my hair out at).

SingleHop offers 5TB in, 5TB out (10TB total). Liquid Web with the server I was looking at only offered 1.6TB in 1.6TB out (3.2TB total).

LiquidWeb's Support seemed excellent, pricewise ($204 server configuration) I thought I could do better.

It was a TOUGH CHOICE. Both providers seemed to have their heads on straight, I've read reviews about both companies here at WHM, both were neck and neck.

SingleHop Offered the most bandwidth, moreover, Chris on the live support chat was absolutely amusing to talk too.

What's happening now?:

I'm continuing to ad the rest of my domains to my server, everything is shockingly fast, and I have no idea why propagation is taking less than 2 hours (sometimes even 20 minutes?!?). I'm planning my next moves, continuing my billing, and posting here because setting up everything didn't take all night like I thought it would. I guess I'll hop on some news site and read up some articles.

These 12hours (not even a FULL 12 hours, I just rounded it up!) so far have been great! I will update this when I hit the week mark.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved