Recommendation For An Open Source Firewall Running On Unix
Jun 11, 2008
Do you have any recommendation for an open-source firewall running on Unix which could do:
- Filter and redirect incoming (with exception for some IP).
- Filter outgoing port (with exception for some local IP or MAC).
- Monitoring incoming traffic
- Monitoring outgoing traffic
- Block access from external to a list of IP
- Proxy authentification
- VPN configuration
I search for 2 days now and nothing seems to respond to these requirements. It's for a local network.
View 1 Replies
ADVERTISEMENT
Apr 14, 2009
I bought two Dell R200 because they was extremely cheap.
My target is Open Source SAN with active/passive setup.
Now i was wondering what RAID-level I should go for.
I will use 1TB SATA-II disks.
1) RAID-1 in both servers and mirror each other with DRBD.
With this setup i have like double RAID-1 so i lose lots of disk space.
4 disks -> 1TB
2) No-raid at all and i will mirror data with DRBD.
4 disks -> 2TB
Then there is change to go for RAID-5. Theres enough space to put third disk in that case
3) RAID-5 in both servers. Mirrors data with DRBD.
6 disks -> 2TB but more performance.
But in every setup i lose space more then i would like to.
Actually i dont need space more then 1TB, but i would like to get best possible redundancy and most space available i could.
Also need to remember that those servers does not support hot-plug HDs so in case there is disk-failure i need to be able to shutdown one server and iSCSI should still be up and running.
Of course theres change to make it active/active.
I was thinking that if I go for the RAID-5 I will make LVM-VG on both nodes (san-vg1 and san-vg2) and use it 50/50.
In case of fail both VG's will be used from working node.
Im going to use Debian Lenny I guess..
I was looking for OpenFiler because of the GUI, but im familiar with Debian and have always done everything from cmd.
View 1 Replies
View Related
Sep 22, 2007
an A/V kind of solution, that allows me to use my own custom signatures, etc. just wondered if such a thing existed.
View 2 Replies
View Related
Oct 1, 2009
I am looking for a opensource ftp client so I don't have to license a million computers with it. Any body have any good ones they can list?
View 14 Replies
View Related
Aug 28, 2009
Natcoweb offers Commitment to Open source - can you explain to me what it means?
Can't understand that statement.
View 3 Replies
View Related
Nov 20, 2008
if anyone replaces a commercial program with their own open source as for eg what Friendster did. For Netscaler, any open source development that are close are similar to it?
View 0 Replies
View Related
Aug 6, 2009
so I have tried every version of solaris I can find on the following two supermicro motherboards and it just won't install.
X7SBL-LN2
X7DCA-L
I've tried 3 different cdrom's and 2 different dvdrom's (one usb)... as I heard that sometimes solaris is picky about this stuff.
They get to where the kernel is supposed to load but it never does. Another one it just goes into a reboot cycle...
I google'd a bunch and it seems maybe the ich9 chipset isn't really well supported?
I can't find these motherboards in the compatible hardware lists but then there isn't a lot of supermicro motherboards in the list I can find.
I'd love some recommendations, I want to test this stuff out but I've spent a few hours and got nowhere so far.
View 14 Replies
View Related
Oct 20, 2009
I have been getting multiple emails a month for a service which I have never purchased.
The information they have harvested off the internet (since I know where they found it) and have obtained solely for use in attempting to charge me is-
Invoiced To
Steven Crothers
12345 Main St.,
Detroit, MI, 48021
United States
Which is completely obvious that it is fake.
I respond to EVERY invoice with a cancelation request, yet the tickets that get opened in the WHMCS billing panel get deleted a day later, however I have tickets in there that I have opened by use of the ticket insertion form that have stayed - none of which were ever answered.
The latest ticket information-
Department:Billing And Invoicing
Date:09/10/2009 10:05
Subject:The Second Time...
Status:Open
Urgency:Medium
It's still open without a reply.
I have put tickets into their Kayako system as well (They have two support systems, I would assume its due to poor management of their company). One of which was answered, with simply the output of `uname -a` on some server somewhere with my name as the hostname.
I than have attempted to reach anyone via livechat at [url]they constantly tell me that I am not allowed to speak to anyone until I pay my bills up to current (now remember, I have NEVER ordered anything from them, they don't even have valid information on file). Just tonight I demanded that I required to speak to a billing agent or I would be pressing harrasment charges against them for the 23 emails I have recieved in 3 months from them trying to extort money from me. They than banned me from their LiveChat software.
I have no idea what to do at this point, they are just sending me bills every month. I mark it as spam, but its frustrating to have a company trying to extort money from me on a very regular basis.
View 14 Replies
View Related
Apr 7, 2008
What is the best open source web-based interface for system administration for Unix?
I found one named Webmin but I'm not sure if this is a stable project.
View 7 Replies
View Related
Jun 7, 2007
What open source in linux do you know for anti-spam & anti-virus? Is there existed a benchmark?
View 1 Replies
View Related
Apr 28, 2008
I'm doing a GreenComputing project.
About CAD fluid modelling;
CD-adapco - commercial
[url]
StAR-CCM
STAR-CD
STAR-CAD Series
Flomerics - commercial
[url]
Fluent - commercial
[url]
Numeca - commercial
[url]
Phoenics - commercial
[url]
Are there equivalent on Open Source?
View 0 Replies
View Related
Dec 5, 2008
Is there any Open source backup software available for web hosting companies? I have a few shared hosting servers and a few dedicated servers and I want to setup a backup server for the backup of the data and config files of the servers. Please give me the names of some good open source backup software.
View 11 Replies
View Related
Dec 4, 2008
Does anybody know of any open source Anti Spam gateway for mail servers? I have used MailCleaner and know how it works. Is there any other available?
View 3 Replies
View Related
Jul 30, 2008
I own a small tech firm, mostly in business to support the customer with basic repair and upgrade. In recent year, more and more of my SMB customer ask me about the hosting service of the CRM or CMS.
The question I have is, although the open source tool, such as SugarCRM and Drupal is free of charge, but will it be free for some one like me to offer the service to my customer, either the same or customerize it a little bit.
And if it can be done, what kind of precaution I need to take, so I will not be involved in the copy right battle later on.
View 3 Replies
View Related
Aug 16, 2007
Thought this might be of interest to folks on WHT. We put together a solution using Nginx ( Engine-X ) to do Global Server Load Balancing. This solution lets you do GSLB without having to fork over $26k per site to F5 or Foundry.
Thought it would be of interest to both end-users as well as dedicated hosting providers who might want to make it into a service (eg. sell a dedicated host in Europe and the US as a group, with the solution pre-installed).
The entire project, including relavent configs is available for download in the latest ( issue 6 ) FREE issue of o3 magazine (o3magazine.com)
View 4 Replies
View Related
Feb 20, 2008
I want to set up a dedicated server for spam and virus filtering (MX)
But i was wondering, is there a good opensource based tool for this?
View 14 Replies
View Related
Dec 27, 2006
Can any one recommend a firewall which supports load balancing? We have a number of servers with in our rack which are currently hosted behind one firewall box but I would like to have the firewall load spread across multiple boxes.
Ideally this needs to be an open source solution. We have Looked at IPCOP, pfSense, m0n0wall but these dont seem to support the sort of load balancing we require.
View 2 Replies
View Related
Nov 8, 2009
I own a small hosting business business, around 50 clients on a shared server and 8 clients dedicated. I do not own a firwall I do everything via iptables on each server which is a pain in the ass.
I just recently purchased a Sonicwall Pro 2040, I wanted to know how do you all recommand to set it up? Should I use MIPS / VIPS? should I do Reverse NAT? Transparent Mode?
View 3 Replies
View Related
Mar 28, 2015
In plesk I have set the ssh rule to allow from source, deny others and added my IP. However, if I connect my PC to my work VPN, I can still login via ssh, even when I am on a different IP as the allowed IP
View 18 Replies
View Related
May 23, 2009
i would be interested in knowing like what would you prefer for your dedicated server? i.e Behind a firewall or on public network. Can anyone experienced provide pros and cons on this one?
View 4 Replies
View Related
Dec 21, 2008
I install and configure apf firewall on my VPS and i have a problem. The port 80 is open, my website it`s up and working but i can`t download anything.
Logs:
[root@HERA ~]# wget ***/test.zip
--02:03:49-- ***/test.zip
Resolving ***... 67.148.95.11
Connecting to ***|67.148.95.11|:80...
View 11 Replies
View Related
Apr 10, 2009
I am currently in the throws of configuring a new dedicated "Windows Web Server 2008 / IIS7 / Plesk" server. As part of the setup I have obviously made sure the firewall is correctly setup. After doing this I have run a remote port scan (from my internet connected PC) to the IP address of the server. This has brought up two ports that should be blocked:
5190
1863
I can open a remote telnet session to both these ports, however if I remote desktop to the server and attempt a telnet connection both ports fail to respond.
Does anybody know what these ports are?
If it helps at all, the firewall surrounding the server is an external Cisco device
View 2 Replies
View Related
Aug 4, 2008
I am using virtuozzo firewall to secure access.
I enter 58.27.175.211/255.255.255.0 for Source Address and Netmask for port 22.
But still I can connect using 58.181.103.217 or 58.27.151.120.
Second is it possible to enter two different ip address in source address?
View 4 Replies
View Related
May 26, 2015
I currently have the Web Application Firewall (ModSecurity) installed but would like a visual interface to block IP's, subnets etc.. Can I install the Plesk firewall as well without any conflict with the Web Application Firewall?
View 3 Replies
View Related
Apr 9, 2014
I'm in the process of installing PPA on infrastructure running Parallels Cloud Server. Each container has 2 interfaces, one public facing and a private interface for inter-server communication.
No problems installing PPA 11.5 (specifying IP's on commandline) or adding service nodes however, the firewall rules the documentation speaks of are nowhere to be seen? i.e.:
Important: After the installation, PPA creates the special firewall chain PPA-SN-Rules-INPUT used for communication with service nodes. Do not change it, otherwise, you will not be able to add service nodes to PPA.Click to expand...
Has this been dropped from PPA 11.5 ? (I recall seeing the firewall settings in 11.1) There is also no sign of the ppa.firewall tool that is also mentioned.
The only rule I see inserted is for Postgres on the management node, and 2 for pleskd on all of the nodes (open to world!).
View 2 Replies
View Related
May 13, 2007
I am trying to install the kernel source.
I have downloaded kernel-2.6.20-1.2948.fc6.src.rpm
I am using fedora 6 64bit.
here are my current kernels:
kernel-headers-2.6.20-1.2948.fc6
kernel-devel-2.6.20-1.2944.fc6
yum-kernel-module-1.0.3-1.fc6
kernel-2.6.20-1.2944.fc6
kernel-devel-2.6.20-1.2948.fc6
kernel-2.6.20-1.2948.fc6
here is what I seen when I installed kernel-2.6.20-1.2948.fc6.src.rpm
rpm -ivh kernel-2.6.20-1.2948.fc6.src.rpm
1:kernel warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
warning: user brewbuilder does not exist - using root
########################################### [100%]
warning: user brewbuilder does not exist - using root
warning: group brewbuilder does not exist - using root
then when I ran:
rpmbuild -bp --target=$(uname -m) /usr/src/redhat/SPECS/kernel-2.6.spec
I seen this error:
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
In file included from /usr/include/sys/socket.h:35,
from /usr/include/netinet/in.h:24,
from /usr/include/arpa/inet.h:23,
from scripts/basic/fixdep.c:117:
/usr/include/bits/socket.h:310:24: error: asm/socket.h: No such file or directory
make[1]: *** [scripts/basic/fixdep] Error 1
make: *** [scripts_basic] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.93770 (%prep)
I need to have this installed to get a app installed etc...
suggestions or ideas?
thanks
View 2 Replies
View Related
Dec 4, 2008
I am trying to find out how to install VPS on HP Unix OS and which one to chose.
Can you set me on right track?
View 2 Replies
View Related
Sep 4, 2007
Any Unix FTP tool to get all files (files+subdirectories) from remote server with 1 line command?i'm using FreeBSD
View 1 Replies
View Related
Aug 13, 2007
Ive recently switched from PC to OSX, i now own '2' Macs, a laptop and a G4 Quicksilver, although its CPU speed is slower and the Ram is lesser then my old PC, it performs much much quicker and more efficient.
The question is, i'm a web developer, i know very little about the back end goings on, such as System Administration, but i've got a few books on the subject which are aimed at Unix system administrators. Does UNIX cover both OSX and Linux (Debian mainly).
Eventually i want to be able to run my own server, i own a debian dedicated server, but its not my own, its the datacenter's and i dont really know enough to get down and dirty in the back end. Id like to be able to set up servers from scratch in the long run.
So would learning UNIX cover both OSX and Linux, im not bothered about Windows, i don't plant to use a Windows machine again.
View 2 Replies
View Related
Mar 8, 2009
is there any performance difference using php on unix and (isapi)windows platform?
View 13 Replies
View Related
Nov 6, 2009
My server has been hacked, I need you please to help learn about Unix server security to protect my server.
View 6 Replies
View Related
