Can any one recommend a firewall which supports load balancing? We have a number of servers with in our rack which are currently hosted behind one firewall box but I would like to have the firewall load spread across multiple boxes.
Ideally this needs to be an open source solution. We have Looked at IPCOP, pfSense, m0n0wall but these dont seem to support the sort of load balancing we require.
I´m thinking about setting up a load balanced setup. I´ll start with load-balancing MySQL, and after, I´ll go with the webservers. MySQL is currently more important.
I have two different bandwidth providers, with two different networks, in the same datacenter. Pings between both are under 1ms.
I was think about buying 4 servers, two for a MySQL Cluster (NDB), and two for a UltraMonkey Load Balancer setup. The MySQL Cluster API would be installed in another server, currently in use.
So, what else would I need? My intention is to have two servers in one provider, and two servers in another provider. Would this kind of setup require large quantities of bandwidth? Both providers wouldn´t let me pass a diferent cable for this purpose, so I would have to use the uplink.
Also, for webservers, I would only need two more servers, right? Maybe rsync them, and have sessions stored in database would be the best choice?
Thank You
I would like to setup a load balancing pair of servers. Currently, I have about 7 servers, all of them working stand alone. I would like to use two of them to host some "power-hungry" websites, that require high availiability. What kind of hardware will I need to do it? I´ve already searched for some, and found load-balancers from F5 which seem to be very good, however they seem to be very expensive (9000 dolars maybe?). Is there any solution which might end cheaper? Will I need anything else?
View 14 Replies View RelatedI've searched quite a bit for myself now, but I have yet to find a place that offers what I need. Most of the servers seem way too overpowered for my needs, but the lower-end server offerings I've found don't have the necessary space and/or bw.
What I'm looking for is something along these lines:
I basically only need to run Apache/Lighthttpd, PHP and MySQL, along with a custom program that would only use 1-2% cpu at its peak and not more than 1mb memory. The web server part would probably not serve more than 10-20 simultaneous visits at its peak.
CPU and memory requirements are therefore very small for me. However, I need 10gb space at the very least, along with ~200gb bw.
I would preferably like the server to be located in Europe, or have very good connectivity to Europe, as I need as low pings as possible.
Unmanaged and no control panel needed.
I need a hosting with .net 3.5 support. Prefer 1G MS sql server space. traffic 10-20G is ok. need a stable hosting with good & capable technical support.
anyone can recommend one? I plan to use discountasp, but their sql is too small, 500M only.
I own a small hosting business business, around 50 clients on a shared server and 8 clients dedicated. I do not own a firwall I do everything via iptables on each server which is a pain in the ass.
I just recently purchased a Sonicwall Pro 2040, I wanted to know how do you all recommand to set it up? Should I use MIPS / VIPS? should I do Reverse NAT? Transparent Mode?
Do you have any recommendation for an open-source firewall running on Unix which could do:
- Filter and redirect incoming (with exception for some IP).
- Filter outgoing port (with exception for some local IP or MAC).
- Monitoring incoming traffic
- Monitoring outgoing traffic
- Block access from external to a list of IP
- Proxy authentification
- VPN configuration
I search for 2 days now and nothing seems to respond to these requirements. It's for a local network.
I want to have a fail over for my server. I was told that load balancing is the way to go.
Could anyone give me some instructions of what I would require. My primary server contains Cpanel.
the loads on my server is VERY HIGH and it needs to be upgraded fast.
I really have no clue as what to do... and i do not know any expert other than you people here - to help me out and put me on the right track.
i was thinking of
1) Getting a server with better CPU and more RAM
2) Load Balancing
However I know nothing of load balancing (other than how to spell it correctly )
1) Which of the above two options should i choose?
2) what are the extra costs in load balancing?
3) what should i know about load balancing before deciding?
4) How does load balancing work? I know there are two server - like one for database and one as webserver... but how does this work together?
5) what config should i be looking at in the two servers?
I'll stop here else i can go on and on and on...
I am giving the details of my server and service below, in case you guys need it.
We host a large number of small websites and are looking for high-availability and the ability to do maintenance on our application servers, so I'm looking for a load balancing solution. At this point, I'm considering Zeus ZXTM LB software, the Coyote Point e350si, and potentially an F5 1500 LTM.
The F5 solution is a total budget buster, and the Coyote Point UI is rough around the edges, but I've used them and they are reliable. Zeus looks like a winner with a great UI, but I haven't heard much about their reliability.
Bandwidth requirements are low at this point, so this is mostly about reliability and ease of configuration of a moderately complex set of services.
Any opinions on these vendors, or alternates I should consider?
I run a GSP (Game Server Provider) and i just baught 2 new octi xeon servers(Intel 5320)
i am having a problem with the load balancing, it dosen't balance de cpu usage on all cores but only on one, and it gets at about 80-85% and 3%CPU usage on the other one.
I was currious as to some suggestions you guys may have for setting up a load balanced website...
I would preffer it to be software based and free as I am just using this for some testing purposes.
I'm looking at load balancing a group of servers located at different data centers.
How feasible is this? Which options/solutions should I take a look at?
I would like to route using some sort of IP tunneling or similar so that the user doesn't see ww1.domain.com etc.
I will be distributing the load of the static/dynamic web pages, no database clustering.
I would prefer something a bit more intuitive than round robin. Perhaps directing incoming traffic based on existing server load etc.
Most of the load balancing solutions I've looked at assume all your servers are on the same local network.
A couple days ago I bought 3 Dell Precision Desktop 360s for the purpose of Load balancing for a web server supporting Apache/php/mysql.
The Dells have:
Code:
Win XP Pro,
1 gb 3200 ram - can support up to 4,
p4 2.4 ghz,
2 scsi raid 36 gb hdd
How can I create Load balancing between 3 identical* web servers: by SCSI, network, or something else?
* Bought them all used. Quality tested the hardware, all of it identical.
I am looking for a load balancer because my website is growing really fast.
I basically need 2 identical servers that will be used to spread out my traffic
Which company offers the cheapest for this?
Our server is going down due to several reasons. We decided use load balancing or clustering solution. What are the main difference between load balancing and clustering?
View 5 Replies View RelatedI have a growing website that needs to move from its current single-server setup to using a cluster of servers to deliver its dynamic pages.
My current host does not support load balancing among its servers, so I'm left to configure that on my own. Round-rovin DNS doesn't work for me as I'll need certain http requests to always go to the central server (the one with the master database).
My distro is Redhat 9, and I only access the server remotely through SSH. I'm using Apache 2 (and PHP and Mysql).
Any ideas on the simplest way to do this?
I've read a bit about LVS (http://www.linuxvirtualserver.org/) but it seems to require a kernel recompile, which is way beyond the things I would dare to try...
is there any way to do this? I know the clustering system built into whm is only for DNS, not for actually serving websites. What I would like is that visitors to a site could be directed to one of two servers, transparently (no www.server1.site.com, www.server2.site.com, it looks idential but are just directed to different ips).
View 2 Replies View RelatedJust curious if any hosts have or plan to have load-balanced servers? How did you implement it (hardware or software OS based)?
View 4 Replies View Related1. Is it possible to get a server in US and a server in Europe and load balance the two servers so that it would detect where the user is from and based on the users location, it would send the traffic to the right server? is this something a load balancer can do or does this have to be done on the php end to detect and send to the right server?
2. is there a way to sync the two servers meaning, we upload the files to one server and the other server automatically gets updated or synced with the original server?
Thank you
I would like to setup a load balancer on my server that handles my traffic.
Is there some program out there to manage this?
Looking for quick, easy global load balancing solution. This is actually for a temporary situation (we need to move to a new DC and need to make this seamless as possible). Linux solution preferred if possible. What can we use to get this achieved?
How exactly does it work? does it need VPN between locations or is client redirected to a different IP somehow?
We would consider dedicated hardware solutions provided that we can get 2 pieces for under $2,000 total (ebay i guess).
I'd really like to set up load balancing for one of my CPU heavy apps. (it's on about 10 machines that are NOT identical, ie. some big, some small)
Currently, I just use a PHP script to direct people to various servers, but it doesn't handle balancing & failover well, and I don't like that the URL changes to www2, www3, www4, etc.
I've looked in to some simple balancers like Pen, Pound and Balance, but I can't find a crucial weighting / balancing configuration. I've also looked at DNS round robin, but that doesn't seem to be sticky, or have weighting or failover.
So, is there any simple http load balancing software that can handle my requirements?
- Stickyness
- Weighted Balancing ( preconfigured or based on responsiveness)
- Failover
I'm working on a script to help users get routed to the nearest, fastest server for the best ping. I'm in 2 datacenters, one on the east and one one the west coast of the US.
I've looked at some of the geo lookup programs based on IP, but they either seem inaccurate or expensive.. and just downright difficult to use.
I found out that some geo load balancers use the connection speed to figure out the best route. So, I'm trying to think of a way of timing the users connection from multiple server locations.
Has anyone here done that sort of thing before? Any suggestions on how to best do that?
Two completely different methods I've considered:
1. putting 2 images on a web page, and using javascript to time the loading of them.
2. pinging the user IP from each coast and seeing which is fastest. (Is there a lighter way than ping? )
i've got a server that averages 3-4 TB a month. it is starting to max out the limits on the servers capacity and i want to setup another server on a different network that can help load balance, and if one of the servers are down for any reason the other server would take on all the load while the other server is down.
what is the best solution for this?
My company is trying to setup a large network to serve around 2.5 million monthly visitors. We are in need of a network consultant to help us out. Does anyone have any recommendations?
View 12 Replies View RelatedWhile I'm fairly familiar with running and serving Java applications (how they handle their load..etc) I'm fairly new "mass" hosting PHP applications.
PHP has a lot of advantages though, for example it's a lot more stateless and you can run a lot of PHP applications on a server.
As part of some new work I'm undertaking I need to come up with some decent infrastructure for PHP hosting. We want to get this right so I'm taking advice here as well.
My configuration would most likely be something like ....
There's something I've been desperately trying to resolve, but failed, and the question is
can load balancing solution be applied to a shared hosting plan, will I need two plans in this case? Or is it only possible for dedicated servers?
Does any host provide load balancing (round robin will be the most frequently used type, I guess)?
Questions to those using Serverpoint.com and Hostgator.com do these hosts offer load balancing?
I'm working on a huge project that will take like 2 months or so to release. The thing is, as I expect, this site is going to grow massively. My question is, How can I handle lot of traffic and give lot of space to my users? With a load balancing right? or server cluster? my question is? how does this work? where do I get it? what are the prices like?
All info on it is appreciated, i want to start with one from day one, so I can handle the grownth of the site once it happens.
I run a pretty large website and it has outgrown the sever that the site is currently on so i was told to go with load balancing or a round robin solution. Have order a load balancer and a second server but don't understand the concept behind have a server cluster. my host told me that the data would have to be synchronized on both servers which i get but if everything is identical on both servers when i run out of space one and i cant add any more hard drives because all the slots are used up, if the data is identical wouldn't both servers be full and if i even added a third server would that one be full to if you understand what im saying.... anyway my point is that i know there is a way that you can add as many servers as you want to a server pool/farm but don't know what kind of configuration i would need. if anyone could help shed some light on this I would appreciate it thanks.
View 3 Replies View RelatedI want to know what kind of techniques and software you guys are using out there. Be it free or paid.
View 9 Replies View Related
