CPanel Checkperlmodules Prerequisite Perl Module Not Found (outdated)
Sep 2, 2007
i had 3 emails last night from my box regarding a [checkperlmodules] automatic upgrade.
The modules cannot install as the modules on my system are outdated. I tried installing the module under WHM, IO::Compress::Base, but it says it is the most recent (2.005) and wont upgrade!
Under WHM -> 'Update System Software' i get the same error as modules wont build as they are require 2.006 and i have 2.005.
Is there anywayy how can i force an upgrade regardles?
Warning: prerequisite IO::Compress::Base 2.006 not found. We have 2.005.
[checkperlmodules] The perl module IO::Uncompress::Gunzip could not be installed.
This module is required by cPanel, and the system may not function correctly until it is installed, and functional. Below is the results of the auto-install attempt:
Test Run
==============
IO::Compress::Base::Common version 2.006 required--this is only version 2.005 at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/RawInflate.pm line 9.
BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/RawInflate.pm line 9.
Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/Gunzip.pm line 12.
BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/Gunzip.pm line 12.
Compilation failed in require at - line 1.
BEGIN failed--compilation aborted at - line 1.
Installer Run
.... snip ....
CPAN.pm: Going to build P/PM/PMQS/IO-Compress-Zlib-2.006.tar.gz
Up/Downgrade not needed.
Checking if your kit is complete...
Looks good
Warning: prerequisite IO::Compress::Base 2.006 not found. We have 2.005.
Warning: prerequisite IO::Uncompress::Base 2.006 not found. We have 2.005.
Writing Makefile for IO::Compress::Zlib
CPAN: YAML loaded ok (v0.65)
... snip ...
View 6 Replies
ADVERTISEMENT
Jul 11, 2008
Trying to Image::Magick via whm perl module installer. Got the below error.
{standard input}:99: Warning: size of "opacity" is already 2; not changing to 8
{standard input}:155: Warning: size of "backdrop" is already 4; not changing to 288
{standard input}:159: Warning: size of "magnify" is already 4; not changing to 288
make: *** [Magick.o] Error 1
JCRISTY/PerlMagick-6.40.tar.gz
/usr/bin/make -- NOT OK
CPAN: YAML loaded ok (v0.66)
Running make install
Make had returned bad status, install seems impossible
perlmod--Install done
I'm using perl 5.8.8
This is perl, v5.8.8 built for i686-linux
View 3 Replies
View Related
Jun 21, 2008
we need to install some perl modules in our server, how can I do it ? my server is Linux with PLESK.
View 2 Replies
View Related
Apr 29, 2007
I tried to install some software but I got this message:
Checking for perl modulesfailed
You need to install the LWP perl module (libwww-perl) to install ...
Does any one know how I can install this module or is it better to install/update the whole sets of perl module?
View 14 Replies
View Related
Apr 15, 2008
I have installed image::magick perl module but its not running error is :--
Can't load '/usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi/auto/Image/Magick/Magick.so' for module Image::Magick: libMagickCore.so.1: cannot open shared object file: No such file or directory at /usr/lib/perl5/5.8.8/i386-linux-thread-multi/DynaLoader.pm line 230.
at flickr.pl line 55
Compilation failed in require at flickr.pl line 55.
BEGIN failed--compilation aborted at flickr.pl line 55.
View 4 Replies
View Related
Nov 16, 2007
while am installing some programs there is some problem in my php
PHP GD Module Not Found
how could i install it in SSH root?
View 10 Replies
View Related
Sep 16, 2007
to install these two but whm did not find them
html2ps
ps2pdf
Only found this,
Meta::Tool:s2Pdf
not sure if that is the proper one anyway.
Using perl 5.8.8 / centos 4.5
View 6 Replies
View Related
Feb 18, 2008
I trying to compile new kernel on centos 5 and every time after "mkinitrd /boot/initrd-2.6.24.2.img 2.6.24.2" I have error:
No module uhci-hcd found for kernel 2.6.24.2, aborting.
View 3 Replies
View Related
Mar 27, 2008
I see the following error, while trying to compile kernel with grsec.
WARNING: No module mptscsi found for kernel 2.6.22.9-grsec, continuing anyway
how to fix this or is it ok to reboot?
More details
#################
[root@server3 linux-2.6.22.9]# make install
sh /usr/src/kernels/linux-2.6.22.9/arch/i386/boot/install.sh 2.6.22.9-grsec arch/i386/boot/bzImage System.map "/boot"
WARNING: No module mptscsi found for kernel 2.6.22.9-grsec, continuing anyway
[root@server3 linux-2.6.22.9]# lsmod
Module Size Used by
ipt_TOS 6465 14
ipt_TCPMSS 8129 1
ipt_state 5953 7
ip_conntrack_ftp 76529 0
ip_conntrack_irc 75633 0
ipt_LOG 10177 12
ipt_recent 12497 0
ipt_limit 6465 18
ip_conntrack 46085 3 ipt_state,ip_conntrack_ftp,ip_conntrack_irc
ipt_multiport 6081 0
iptable_mangle 6849 1
ipt_REJECT 10689 42
loop 20681 2
iptable_filter 6977 1
ip_tables 22721 10 ipt_TOS,ipt_TCPMSS,ipt_state,ipt_LOG,ipt_recent,ipt_limit,ipt_multiport,iptable_mangle,ipt_REJECT,iptable_filter
md5 8129 1
ipv6 243553 32
parport_pc 28033 0
lp 15661 0
parport 38025 2 parport_pc,lp
autofs4 26053 0
sunrpc 144037 1
dm_mirror 31557 0
dm_mod 67177 1 dm_mirror
joydev 14465 0
button 10705 0
battery 12997 0
ac 8901 0
ohci_hcd 24273 0
ehci_hcd 32325 0
k8_edac 19173 0
edac_mc 28297 1 k8_edac
tg3 106437 0
ext3 120137 4
jbd 60121 1 ext3
sata_svw 12229 0
libata 106141 1 sata_svw
mptscsih 5569 0
mptsas 24661 5 mptscsih
mptspi 14033 1 mptscsih
mptscsi 42449 2 mptsas,mptspi
mptbase 67361 3 mptsas,mptspi,mptscsi
sd_mod 20801 6
scsi_mod 120909 5 libata,mptsas,mptspi,mptscsi,sd_mod
[root@server3 linux-2.6.22.9]# cat /etc/modprobe.conf
alias eth0 tg3
alias eth1 tg3
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptscsi
alias scsi_hostadapter2 mptspi
alias scsi_hostadapter3 mptsas
alias scsi_hostadapter4 mptscsih
alias scsi_hostadapter5 sata_svw
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
[root@server3 linux-2.6.22.9]# cat /etc/redhat-release
CentOS release 4.6 (Final)
[root@server3 linux-2.6.22.9]# uname -a
Linux server3.name 2.6.9-67.ELsmp #1 SMP Fri Nov 16 12:48:03 EST 2007 i686 athlon i386 GNU/Linux
[root@server3 linux-2.6.22.9]#
[root@server3 linux-2.6.22.9]# lspci
00:01.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge
00:02.0 Host bridge: Broadcom BCM5785 [HT1000] Legacy South Bridge
00:02.1 IDE interface: Broadcom BCM5785 [HT1000] IDE
00:02.2 ISA bridge: Broadcom BCM5785 [HT1000] LPC
00:03.0 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
00:03.1 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
00:03.2 USB Controller: Broadcom BCM5785 [HT1000] USB (rev 01)
00:04.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines (SEP1) (rev 02)
00:06.0 PCI bridge: Broadcom HT2100 PCI-Express Bridge (rev a2)
00:07.0 PCI bridge: Broadcom HT2100 PCI-Express Bridge (rev a2)
00:08.0 PCI bridge: Broadcom HT2100 PCI-Express Bridge (rev a2)
00:09.0 PCI bridge: Broadcom HT2100 PCI-Express Bridge (rev a2)
00:0a.0 PCI bridge: Broadcom HT2100 PCI-Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:0d.0 PCI bridge: Broadcom BCM5785 [HT1000] PCI/PCI-X Bridge (rev c0)
01:0e.0 RAID bus controller: Broadcom BCM5785 [HT1000] SATA (Native SATA Mode)
02:01.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS (rev 01)
07:00.0 PCI bridge: Broadcom EPB PCI-Express to PCI-X Bridge (rev b5)
08:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3)
08:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5715 Gigabit Ethernet (rev a3)
[root@server3 linux-2.6.22.9]#
View 3 Replies
View Related
Jul 7, 2007
I received this two emails with the following subjects below..
- [checkperlmodules] The perl module Net:AV:erver could not be installed.
- [checkperlmodules] The perl module XML::LibXML could not be installed.
What does this mean? That was only the email subject, the message was pretty long,
View 4 Replies
View Related
Jul 18, 2009
I am running Clamav in Windows, it seems that the FreshClam is giving some errors when updating
ClamAV update process started at Sat Jul 18 13:20:41 2009
WARNING: Your ClamAV installation is OUTDATED!
WARNING: Local version: 0.95.1 Recommended version: 0.95.2
DON'T PANIC! Read http://www.clamav.net/support/faq
main.cvd is up to date (version: 51, sigs: 545035, f-level:
Downloading daily.cvd [ 99%]
ERROR: Can't rename c:clamavdata/clamav-8b0fa144b304158b0
e0c.clamtmp to daily.cvd: Permission denied
View 3 Replies
View Related
Apr 13, 2009
I just began work at an office to manage one of their web assets. They have it hosted on a VPS from Network Solutions. In looking at the VPS itself as well as the information on the Network Solutions site, it appears they only offer Fedora Core 6 to their linux VPS customers.
FC6 was released October 24, 2006 and Fedora support is 13 months. That means that as of November 24, 2007, FC6 has received no security updates to any of it's software nor the kernel.
The Fedora project even states that it might not be a good choice for corporate users because of the need to update the whole OS every 13 months.
I can't update the OS on the VPS, I called support and they told me that they only offered FC6 and they had no solution to the security patches problem.
Is this even posssible?! Could a hosting service really consider offering a 3 year old OS with no security support as their only option? Am I missing something incredibly obvious?
View 5 Replies
View Related
Apr 5, 2008
I have recently bought this second hand server on ebay to colocate with.
[url]
Are the specifications good compared to newer servers or is it outdated hardware?
View 6 Replies
View Related
Feb 21, 2008
Is there a way to located out dated and already exploited scripts on my VPS? I have already cleaned out the /tmp directory but how can I scan my clients accounts to determine if they have been exploited? Or if they should update scripts that they are running.
View 2 Replies
View Related
Aug 27, 2007
would I be able to install any additional php modules NOT listed in Cpanel (example memcache, ffmpeg, etc.) on a Cpanel server? If possible, how do I do it?
View 6 Replies
View Related
Mar 27, 2007
Its a cpanel server with latest version.
I have been noticing that several perl process are running most of the times which takes a lot CPU resource percentage, The server wads deployed som 5 months back but i have been noticing these perl processess from like 10-15 days, it looks like this
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31097 nobody 25 0 7188 3284 1176 R 46 0.2 1322:57 perl
25122 nobody 25 0 8988 4104 1160 R 45 0.2 620:22.34 perl
28144 nobody 25 0 7852 3712 1232 R 34 0.2 600:18.11 perl
6878 nobody 25 0 9316 4064 1104 R 33 0.2 1007:38 perl
25120 nobody 25 0 8980 4068 1128 R 33 0.2 623:28.04 perl
8263 nobody 15 0 8496 4308 1260 S 2 0.2 0:28.21 perl
What should i do to close them all and to make them occur not anymore, I dont think there is any perl based script working on the server. Not even much PHP based functionalit, Only static HTML pages.
View 2 Replies
View Related
Aug 10, 2008
I have had subversion installed on my cPanel server for some time, but I have some clients wanting to host their repositories as well. A lot of them aren't familiar with the command line like I am, so I was wondering if anybody knows about a cPanel plugin that could manage SVN repositories.
View 0 Replies
View Related
Jun 10, 2007
How to block starting PERL scripts to my customers?
View 6 Replies
View Related
Nov 19, 2008
how to enable pdo_pgsql module on a Centos / Cpanel box?
Apache is already compiled with PDO (via whm) but it seems to be for mysql only. phpinfo does show pgsql but not pdo_pgsql.
View 11 Replies
View Related
May 21, 2007
I have almost 300 sites on one of my server, and its a pain in the *** to get every statistics on each cpanel admin... so what I need.. is a centralized webalizer/analog utily/addon/module to get all stats on one page... i meant stats from all the 300 domains in only that page... so that way i will avoid jumping between cpanels admins to watch the stats...
Does anyone know something like that for a cPanel server with RHEL 4
View 1 Replies
View Related