i have changed the nameservers in one of my domains and now on it is loading from new server but only when i type mydomain.com.. When i type www.mydomain.com my site stills loading for the old server...it have passed 12 hours from the time i made the change...it is something else i must do to have my site also available from the new server when someones type www.mydomain.com ?
View 3 Replieswell i have this whm box.
I added a pair of new nameservers.
and then tried to delete the old nameservers .
Removing Nameserver Ip 11.11.112.11
The ip 11.11.112.11 is now ready for re-use as a different nameserver
then i click on nameservers and i see old ones again :/
what i done was change it in /etc/nameserverips
again when i click on whm / Nameserver IPs I see old nameservers!
I'm stuck. First let me explain how my current sites are setup. I have all of my personal domains through GoDaddy at the moment. I set each domain to point to GoDaddys default hosting nameservers. Then I create DNS A Records for my domain pointing to the IP of my webserver. That works.
I recently purchased a domain name from a backordering service. This domain is with a different registrar. They do not offer any kind of managed DNS and will not create A records for me. My server is not setup as a nameserver so I can't do either. I also can't transfer the domain over to GoDaddy because of ICANNs two month rule.
Does anyone have any suggestions on what I can do? Is there a service out there where I can point to their nameservers and they will send traffic to my servers IP?
I'm not as sharp on this topic as I probably should be
I need to change the IPs that are assigned to my name servers. In WHM they are set fine, ns1.xxx.com and ns2.xxx.com both have their own ip's.
However the nameservers were first setup with 123-reg as they hold the domain im using.
when i ping each nameserver they both endup pointing to 1 ip address (the ip of ns2.xxx.com) so i need to change this.
how i would go about getting this changed?
I changed my nameservers from my last domain, I deleted all the dns entries etc... and updated my hostname etc... But, when I go to create a new cpanel account, it still shows up with my own nameservers and making it with my old nameservers.
I tried going to /etc/nameserverips and they were the new nameservers. Im not sure how to fix this, any ideas?
Recently I have migrated from a VPS to another VPS. How can I change nameservers for domains in old VPS to point them to the new VPS ?
View 6 Replies View RelatedWill the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
I have a client on a dedicated IP, today we needed to downgrade the web hosting plan. As the web hosting plan puts users on a default shared IP, this plan change also changed the dedicated IP to the shared one causing some propagation issues for a small period of time.
I have contacted WHMCS about this asking if they had a way of changing the clients plan but keeping the IP address intact as this could lead to some very undesirable outcomes. They explained that it is not their fault and to contact Parallels.
I know I can change the plan directly in Plesk however by initiating the plan change via WHMCS, everything is automated.
Has anyone helped clients transition from one domain to another? Maybe dissolving a partnership or renaming their company... so a new domain name has been registered and a new website created.
2 Issues:
#1 Using .htaccess 301 redirect
We used the following command line in their old website's htaccess file
Redirect 301 / [url]
The goal was to get people try to visit any page of their old website (i.e. OldWebsite.com/contact.html) redirected to their new website (i.e. NewWebsite.com/contact.html). Isn't that supposed to change the address bar's URL, too? For some reason, I visit their old site and I seem to be redirected to their new website but the address bar still has their old domain name? Something is going on???
#2 Having their new company name for 2 years now. People can enter her new company name in Google, MSN or Yahoo. Her new company name appears in the search results but has the old domain name associated with it. We are trying to get rid of any reference to that old domain name? What's the easiest way to do this? So what people see in search engines is:
New Company
Short Meta Description
www.OldDomain.com
What steps did I miss in this transition?
What steps do I have to take on their old website/old web server to control it's appearance on search engines and make sure people get to the new website?
Will domains still function if they have differing nameservers at the registry from what they do on the server side? i.e. domain1.com pointing to ns1/2.example.com at the registry but on the server the DNS zone has it as ns1/2.example2.com, baring in mind both sets of nameservers are pointing at the same server.
View 2 Replies View RelatedI have purchased a reseller account from www.reseller.net (not real names) They provide me with ns1.reseller.net and ns2.reseller.net, as well as the two associated ip addresses. They tell me to use these 2 ip addresses to set up my own custom nameservers.
I want my own nameservers - ns1.mydomain.com and ns2.mydomain.com. Tech support at www.reseller.net tells me thay cannot help me. They tell me to go to the company where I purchased and manage the domain name www.mydomain.com.
I do, and find the control panel page where I -CREATE NAME SERVER-. This I do, and I use the above mentioned ip addresses. This seems to work. When I go back to this control panel page the next day, the entries I made are still there. Yet, I cannot "ping" my nameservers.
Now what? I have tried "google-ing" and not being a super-tech, I get lost. It appears that I must make some changes in my WHM, (I have a WHM...), but I have no access to any "Server" settings.
I have another reseller account with a totally different company, and when I asked them to set up custom nameservers, they just "did it" for me. Again, the hosting company was not related to the domain registering company.
I am experimenting with setting up my first unmanaged dedicated server.
I have directadmin as a cp.
I have 5 separate IP's available to me.
I went to my domain registrar and set up host as ns1.mydomain.com and ns2.mydomain.com using my first two IP's that are available.
My question now is what is the best way to use my three remaining IP's? Do I set them up as completely different domain nameservers ie. ns1.otherdomain.com etc.? Out of those three, I thought you need two IP's per nameserver domain? Is that wrong thinking?
I don't want any relationship shown in a whois dns info between the ips.
How to configure DNS(nameservers) without cP/WHM and any other Control Panel. I can use your only SSH for it.
OS = CentOS5
DNS Server: Bind
If i create a vps using openvz and use a new ip for that vps e.x:
123.456.789.0
What nameservers i must use to point my domain to that vps?
NS1 <--- 123.456.789.0
NS2 <--- ?
how can i run some VPS(diferent ip's) in a DedicatedServer with same nameserver.
example:
all sites in VPS1 using ip: 10.10.10.1
all sites in VPS2 using ip: 10.10.10.2
all sites in VPS3 using ip: 10.10.10.3
all in a DedicatedServer
now i want using ns1.dns.com for all sites.
xen/openvz on Centos/RHLE used.
I recently bourght a dedicated server, and found out I don't know whta my name servers are, the company gave me there nameservers, I was fine, but when I input my name servers in namecheap or godaddy ect, I get this:
Quote:
There is some problem updating the NameServers
The problem is: nRRPResponseCode 541
I just have a question on setting up Nameservers in WHM. Is it necessary to add an "A" entry to the name servers, and if so, do I need to do so on both nameservers, or just the first one?
ns1.mysite.com
ns2.mysite.com
What's the reason/ necessarily for adding a A entry to a nameserver, and can it be skipped?
hello
i really rely on your expertise guys please help me!
a cpanel server A has some domains on host 1
a new cpanel server B is set ready for migration on host B.
the greek registrar i use,
by accident (As they say) switched ips for my nameservers from A to B and the migration has not been done!!!!
can i set up a record or something on server B to forward all traffic back to server A ???????
Sorry i'm not a network expert. That's why i'm here
thanks
simos
I have a domain at Enom and I have a use for it which would require it being assigned an IP address rather than nameservers in order to reach the server it would be hosted on - I have 2 questions please:-
Would doing it this way bring any penalties in search engine ranking, PR or any other problems?
How would it best be done at Enom?
i have started moving domains from Cpanel/whm server to my HSphere server that uses a new nameserver, but have come up against problem with the new NameServer.
When moving .biz .info i get error about nameserver not being resgistered, after doing some seaching it appears that some domain resgistrars (in this case 123reg) are starting to enforce a security feature whereby All registrars need the name server registered before you can point any domain name to the name server.
Diggin further i found this at stargate.com which where i have my HSphere service domain:
1.
Registering a Child Name Server as mentioned above is just the first step. The Child Name Server needs to be registered at the Registry to only serve as a non-authoritative Record should your Child Name Server not be resolvable in some extreme condition.
This Name Server would start working only after you have added an Address (A) Record or Canonical (CNAME) Record for this Name Server within the Zone for the domain name (of this Child Name Server) at your own DNS Server, thus binding the NS to the IP Address.
Examples
i. If you are running your own DNS Servers then you would need to add a Zone for the domain name your-domain-name.com and create an A Record like
ns1.your-domain-name.com. 38400 IN A 111.222.333.444
ii. If you wish to simply point your Name Servers to another Name Servers, you may add a CNAME Record to those (while ensuring that those Name Servers have an A Record within the Zone created for your Name Servers as well).
ns1.your-domain-name.com. 38400 IN CNAME ns1.service-provider.com
Also at ns1.service-provider.com there should be an Zone for your-domain-name.com with an A Record for ns1.your-domain-name.com, making it authoritative for resolving your-domain-name.com.
In most cases your ISP would have already created the above for you and you need not bother about the same.
My service domain, and one i am using for nameservers, HSphere dns settings looks like
Name TTL Class Type Data Action
cp.mydomain.net 86400 IN A 85.264.15.83 Click to delete
ns1.mydomain.net 86400 IN A 85.264.15.84 Click to delete
ns2.mydomain.net 86400 IN A 85.264.15.85 Click to delete
web.mydomain.net 86400 IN A 85.264.15.86 Click to delete
mail.mydomain.net 86400 IN A 85.264.15.87 Click to delete
mysql.mydomain.net 86400 IN A 85.264.15.88 Click to delete
So from what i tell i have furfilled critria?
I have to say i am a little confused over this!
I am thinking that maybe i have to make some changes at stargate.com or maybe get my co-lo provider to make changes?
I was looking for a tool that would allow me to enter a Nameserver, and it would then return the Domains that use that Nameserver in its DNS.
I see domaintools.com has a tool that does it, but it costs. Is there a free one available?
I have created 2 nameservers and assigned unique IPs to them and I have my domain dhingana.org using them. Everything was fine until today when suddenly I cannot reach dhingana.org.
I restarted BIND, Apache and even my server but still the same issue. I checked that Apache is still running.
My DNS reports for dhingana.org says:
A timeout occurred getting the NS records from your nameservers! None of your nameservers responded fast enough. They are probably down or unreachable. I can't continue since your nameservers aren't responding. If you have a Watchguard Firebox, it's due to a bug in their DNS Proxy, which must be disabled (31 Jul 2006 UPDATE: several years after being informed of this, there is a rumor that there is a fix that allows the Watchguard DNS proxy to work).
I have added a new ip for my nameserver3 and now it is pingable... But when I try to point a domain it says something like "check SOA record for your nameserver3" etc...
How can I add SOA records for this new nameserver via whm or?
Just got a new dedicated box (Fedora 5/CPanel/WHM). I didn't realize I had to set up my own nameservers with it. Definitely not a subject I am well versed in. Anyone know where I can find out how to get started?
View 9 Replies View RelatedI have a question on how to set up (clone) two nameservers.
I have two VPS' with two IPs that are totaly independent of each other. Both running ispCP with Apache2, mail, ftp, mysql, AND bind9 as DNS managment.
So. I want these two server to be as independent as they are, BUT they should share NameServers with each other.
Something like this:
host1:
ns1.domain.com = host1
ns2.domain.com = host2
host2:
ns1.domain.com = host1 (or host2?? = inverted)
ns2.domain.com = host2 (or host1?? = inverted)
A lot of domains are running more then one NameServer, but I could not find any tutorial on how to "clone" the NS from one to an other. Is it enough to just add some kind of "transfer to IP setting" in bind, or do I have to have scripts that download settings and files from one server to an other regularly?
Webmin ...
View 2 Replies View RelatedI got dedicated server with plesk 7.8 installed on it. Can anybody tell me what to do next to add new website.
I have ip through which i can login to plesk control panel.
I want to know how can i create name servers which i will use for my domains like ns1.abc.com ns2.abc.com.
What setting i need to create by use DNS button in control panel to run my sites properly.
We just got a dedicated server, my first time messing with anything dedicated though I've had WHM before. I have 4 domains I'd like to setup to point to this. But I'd prefer our company URL to host the name servers. Domains are registered through enom who will allow me to setup the name servers.
I'm trying to use the "Nameserver IPs" section in WHM to setup the name servers but it just sits and "works" but never actually finishes. Does my company URL need to be pointing to the server before doing this?
Am just wondering is it possible to have more than 4 nameservers in cpanel.
I know in server configuration you can add the 4. Is it possible to add more?
Recently we add a new server,so we register ns3 and ns4 to 2 new ips,of the new server.
Then,in the old server,we set ns3 and ns4 as A records to the new ips.
Doing a dns reverse to ns3 and ns4 they report the correct ips. BUT When make a dns reverse for the nameservers ips,it makes a loop.....