Adding Ip To Dedicated Server
Oct 24, 2007how can i add a ip to dedicated server?
View 2 Replies
ADVERTISEMENT
Adding A Dedicated Service
May 26, 2008how i can add a dedicated server service to my website. Im looking for something that will possibly give me something with bandwidth graphs and monitoring. And an easy way for our customers to tell us to reboot possibly. I currently use WHMCS so maybe you guys might know of something that will work with whmcs?
View 1 Replies View RelatedPlesk Automation :: Adding Dedicated IP Breaks Site (visitors Land On Default Site)
Apr 14, 2015Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.
The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.
The bad news: visitors land on the default web site of the service node, with the default SSL certificate.
Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]
After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.
However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.
If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.
Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.
Adding IPs To CPanel/WHM Server
Sep 1, 2007I have setup a new cpanel/whm server. The main IP address works fine and I added the additional IP addresses the datacenter gave me.
That was yesterday, today I logged on and when I go to IP Functions >> Show or Delete Current IP Addresses all the addresses I added yesterday are showing up in red text and I cant ping any of them, not even if I ping them from the server itself. Seems that when I rebooted the server after the initial cpanel setup something has caused this.
Trouble is my name servers are sitting on 2 of the malfunctioning ip addresses so they aren’t working at all.
I have tried removing them ad re-adding them and they still show red.
Adding New Whois Servers To Linux Server
Nov 21, 2008How do I go about adding new whois servers in my linux box so that the "whois" command can work for those domains? I notice I can't get any .me information now.
View 4 Replies View RelatedPlesk 11.x / Windows :: Adding Second MySQL Server
Sep 12, 2014I have a dedicated server and I am about to get a few high traffic sites that will be Joomla based and MySQL served. What I am thinking a about is to create another MySQL instance, leave the current websites on the "old" instance and get the new ones onto a separate instance.
I am on PPP 11.0.9 on windows and the current mysql version is 5.1.56 on port 3306 (I can get other ports for other instances).
What I did was the following:
In the Database Servers page, I hit "Add Database Server"
In the next page I add the following:
MySQL (from the dropdown)
localhost
3307
(leave blank the default check box)
I then add the Administrator's username and passwords and hit OK.
The next page, reports an error message (in between asterisks below):
************************
Error: Test connection to the database server has failed because of network problems:
No connection could be made because the target machine actively refused it.
************************
The primary (eg. current) mysql instance is working fine, it's just I cannot add a second server...
Setting A Server At Home + Adding Own DDOS Protection
Sep 6, 2008intend to hire someone to setup a server at my house. I will communicate with my isp in order to get a permanent IP. The reason I am doing this is I get too frustrated beings ddos'ed and even gigenet proxyshield cannot help me becuase of DMCA and other things.
Once I will have my server up and runnings, do you think it is possible to setup a ddos protection software/hardware ? If it's possible, do you have recommendation/lead for me so I can start looking at ?
Plesk 11.x / Windows :: Account Not Adding DNS Record On MS-DNS Server
Apr 24, 2013I have one domain who's not create dns in MS DNS server, i try create manuall but after this the record is missing, but on plesk showing, How to fix this ?
View 2 Replies View RelatedAdding Of User Defined Services In Windows 2000 Server
Jun 17, 2008Just checking how do I add a Windows Defined service in Windows 2000. I saw some info.
But it seemed to apply to Microsoft Windows 2003 Server as there isn't instsrv or srvany in Windows 2000 server even after I uploaded the Resource Kit Tools. Am I missing something?
Or can someone tell me where to download these for Windows 2000?
Plesk 11.x / Linux :: Error Adding Remote Database Server
May 9, 2014PRODUCT, VERSION, MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE
Plesk 11.5, 11.5.30 Update #44, last updated at April 30, 2014 03:25 AM, Centos 6.5 (Final), Linux 64bit
PROBLEM DESCRIPTION
When I try to add an extra MySQL server, running on a different server, I always get an error that the user has no admin access. But the user I created does have admin access to the database.
The remote database is a MySQL 5.5 on a Linux Ubuntu 12.04 LTS server
STEPS TO REPRODUCE
Tools & Settings -> Database Servers -> Add Databases server
ACTUAL RESULT
Error: Test connection to the database server has failed because the supplied account does not possess administrative privileges: Access denied for user 'admin'@'%' to database 'd536cedf97037e'
EXPECTED RESULT
A working database connection.
ANY ADDITIONAL INFORMATION
These queries are logged by MySQL:
140509 16:54:51 28 Connectadmin@10.1.0.162 as anonymous on
28 QuerySELECT VERSION()
28 Querycreate database `BUG115166_1374110215536CEC3816DD2` /*!40101 default charset=utf8 */
28 Querycreate database `bug115166_1374110215536cec3816dd2` /*!40101 default charset=utf8 */
28 Queryinsert into mysql.user (Host, User, Password) values ('%', 'bug115166_17546', password('BUG115166_1374110215536CEC3816DD2'))
28 QueryFLUSH PRIVILEGES
[Code] .....
If I just ignore this message, go to a subscription and create a database, then the database gets created just fine. It's just Plesk that thinks that something went wrong.
Plesk Automation :: Local Server Visible When Adding New MySQL Database
Mar 27, 2014Somehow when customers add a new MySQL database they can select a Local MySQL server. It turns out this is the MySQL instance running on the CP server, can I somehow hide this server from the list?
View 1 Replies View RelatedPlesk 12.x / Windows :: Adding Account To Thunderbird - Mail Server Doesn't Use Encryption
Jul 22, 2015I have a problem while i'm trying to add a mail account to Thunderbird
I see the problem that Mail server doesn't use encryption !!!
Plesk 12.x / Linux :: Adding Multiple PHP Version / Error Reading Data From FastCGI Server
Jun 6, 2014I'm trying to add multiple PHP version (current version installed: 5.5.13), using the official documentation. I always get 500 Internal Server Error after switching to the new version, with the following error_log content:
Code:
[Sat Jun 07 00:49:35 2014] [warn] [client XXX.XXX.XXX.XXX] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server
[Sat Jun 07 00:49:35 2014] [error] [client XXX.XXX.XXX.XXX] Premature end of script headers: index.php
Here you can view phpinfo() obtained running php54-cgi index.php from the command line. Same script doesn't work as FastCGI.
I'm trying to add PHP 5.4.29. Here is how I compiled it:
Code:
./configure
--prefix=/usr/local/php54
--with-bz2
--with-config-file-path=/usr/local/php54/etc
--with-config-file-scan-dir=/usr/local/php54/etc/php.d
--with-curl
[code]....
Switching back to PHP 5.5.13 and the script works fine (a simple phpinfo() output).How can I try to understand/debug what's wrong with the installation?
Dedicated Virtual Server Vs Regular Dedicated
Sep 3, 2007What is the difference between Dedicated Virtual vs Regular Dedicated Server?
Also what are the pros and cons of going with Virtual?
Dedicated Server Along With Dedicated Support
Apr 1, 2008to move from shared windows hosting to Dedicated windows hosting. This will be our first dedicated server and experience with dealing it too.
Someone suggested me Rackspace. But they were charging premium rates 440 USD for entry level windows server.
Dedicated Server Vs Virtual Dedicated Server ..
Sep 7, 2008I am currently using a shared hosting but due to increasing traffic and server load my existing host is not able to provide reliable services and I am planning to upgrade my hosting service.
While I was searching for Dedicated Servers, I learnt about Virtual Dedicated Servers but I am not very sure about their reliability? Are Virtual Dedicated Servers useful? My website current serves over 2500-3000 visitors a day resulting in 30,000 pageviews and I am expecting the traffic to grow by atleast 2 folds in the next few months as I start some PPC campaigns and Email Marketing for my website. Can a Virtual Dedicated Server cater such needs assuming my website to be more of less dynamic website written in php?
Plesk 11.x / Windows :: Don't Have Root Access To Server As It Is A Webfusion Dedicated Server
Oct 16, 2013I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
Adding A Template To An URL
Feb 19, 2009i saw a website template that i would like to purchase. i can change the contents of the template to whatever i like. i can also register a URL and have it hosted. my question is..... how do i get the template to show on the URL? do i need to know HTML?
View 5 Replies View RelatedAdding IP Address To WHM
May 21, 2009about adding IP addresses to cPanel.
I've added 8 IP's to my WHM, and I am slightly confused...
I moved one domain to the new IP address and it worked fine after 15 minutes. I then moved another to a new IP address and it did not work after waiting over 30 minutes. The only difference between the two accounts is one account has 2 domains attached to it and one has about 15 domains attached to it.
If I just were to leave it sitting and wait would it switch to the new IP?
I would have no problem with waiting except for the fact that it resolves to the "cPanel/WHM is now installed" screen, rather then the website.
Adding More IP Addresses
Aug 2, 2009We all know that our localhost can be accessed at 127.0.0.1 or your the IP assigned by your NIC which starts from 192.168.1.2 (or 192.168.0.2 in some cases depending on the router you use).
My question is that, how do I map the other IPs 192.168.1.3, 192.168.1.4, 192.168.1.5 etc. etc. and have them point to my localhost?
Adding In New IP And Gateway
Jul 21, 2008My server in the datacenter has to migrate to new IPs. Is it feasible to add new ip and gateway and have that operating on eth0 -- doing it remotely?
The dc said I can have both IPs concurrently working for the next 10 days or so.
But, I'm still unsure if I can safely set the new ip and gateway on the server remotely.
Any help would be appreciated. Of course, I have logged a ticket to see if they will set my new primary ip from the console and all the virtual interfaces ...
But, would like to know for my own information if this process is doable remotely.
Adding Nameserver
Jan 12, 2008I have a Vps that I instlled Cpanel with two IP, and I have a domain on anotherr server that I want create two Name server for this new VPS
I create two name server record on domain panel like this :
linux1.mydomain.com [my first IP]
linux2.mydomain.com [my second IP]
then I assigned nameservers to IPs on Cpanel but my name servers can not ping yet and my sites on this VPS can not open!
What should I do for joining the nameservers of my domains and my VPS?
Adding A Domain
Aug 30, 2007Can I do this with Apache, or do I need something like Plesk or cPanel?
By the way, I have HSPComplete and Virtuozzo atm.
Adding IP Block To APF
May 9, 2007I currently have a private server in my office which has cPanel and APF installed. The server only allows one static IP to access SSH, at the moment I'm away and don’t have a static IP on my current ISP connection so cannot access SSH.
Is there a way to add say 123.456.000.000 which would allow all IP's in the 123.456 block?
Adding 2nd Processor
Jan 11, 2007I have a single Intel Xeon Processor and already found a same stepping code Xeon processor to upgrade.
I'm running CentOS 4.4. If I add the 2nd processor, do I need to configure anything on the system.
CentOS 4 Adding A 2nd IP
Feb 18, 2007Heres the setup:
BoxA has 123.123.123.123 as its main IP
Request another IP allocation from provider, they grant it, how do I add 124.124.124.124 to the box (preferrably without a reboot required) so it is pingable/loadable etc?
Adding MSSQL Support To PHP
Jul 15, 2008I installed mssql support to my cpanel server as you mentioned on cpanel forums. When i request some data it gets charecters in error and writes them to mysql server.
I've installed this on previous server and didnt have this kind of problem.
I set same configs with old server (mysql.php,etc.) but it's not working.
[ http://forums.cpanel.net/showthread....ighlight=mssql ]
cPanel Ticket Message;
we are still having same problem on mssql, there are difference with 2 dedicated but we did not solved it yet. for example, you can see on first screenshot, there is some character errors while it getting datas on mssql server and we think that, it will cause problem and not showing totals but we did not have any problem on old server without characters problems
New server :
http://img142.imageshack.us/img142/2091/newservercc8.jpg
Old server :
http://img362.imageshack.us/img362/4138/oldserverzz0.jpg
Adding IMAP To Apache/PHP
Apr 4, 2006I installed Fedora Core 4 from the DVD included with the "Run Your Own Web Server" book. Everything went great.
Now I need to add IMAP to PHP. This has proved very difficult, as it seems that the sources are not provided. I downloaded the latest Apache and PHP and tried to build with the same configuration used to build the ones that came with the book. (Apache went fine - the module inclusions are done through the configuration files. PHP is not going well at all - I grabbed the ./configure options from a phpinfo() call, and it just barfed all over the place.)
Simple question: is there an easy way to get the IMAP into PHP without going through the recompilation?
Simple answer: Install the PHP-IMAP RPM. I sure made this a lot harder than it need to be.
Adding Multiple Domains
Jun 28, 2009I'm using webmin and I was able to setup the dns and domain but the problem is when I add a 2nd domain it gets redirected to my main domain.
View 9 Replies View RelatedExtra IP Address Adding In Whm
May 29, 2008We have bought the extra IP's from hosting provider. They have assigned for our network.
So that I have added on server via WHM but when call the IP Address from browser the ip address or not responding and also not pinging.
This server recently we have reloaded the os.