Will This HDD Fail
Jun 13, 2008
My messages log is full of such type of messages:
... smartd[2493]: Device: /dev/sda, 5 Currently unreadable (pending) sectors
... smartd[2493]: Device: /dev/sda, 5 Offline uncorrectable sectors
... smartd[2493]: Device: /dev/sda, 5 Currently unreadable (pending) sectors
... smartd[2493]: Device: /dev/sda, 5 Offline uncorrectable sectors
I run: smartctl --all -d ata /dev/sda2
and got this table:
Code:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 093 006 Pre-fail Always - 195271338
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 48
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 259244139
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9516
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 51
187 Unknown_Attribute 0x0032 087 087 000 Old_age Always - 13
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 056 044 045 Old_age Always In_the_past 740163628
194 Temperature_Celsius 0x0022 044 056 000 Old_age Always - 44 (Lifetime Min/Max 0/14)
195 Hardware_ECC_Recovered 0x001a 067 049 000 Old_age Always - 145805438
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 5
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 5
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
Machine freezes several times a day.
I have this machine with FDCservers. They kindly replaced power supply but I'm worrying that it's not caused by power supply but HDD.
take a look at table and let me know your opinion.. Is this HDD ok or will it fail soon ?
View 3 Replies
ADVERTISEMENT
Oct 22, 2007
way to get a complete DNS Fail-Over solution for my website.
Currently I'm hosted at one Hosting Facility in NY, and I'm thinking on getting a backup location either in TX or CA but my biggest problem is visitors as even If I will get the secondary location and set the TTL to 10-20min some ISPs are caching the ip address for 24hrs, so even If I will change the IPs from the old range to the new, some ISP's around the world will still cache the old IP and the visitors will get nowhere in case the main location has an issue.
And I was wondering if there’s a way to send people to one direct IP let’s say 1.2.3.4 and from there to load the pages / db or mask there connection under the domain name to a different location without them noticing it so the SSL certificate wont produce error messages.
As I'm sure that Yahoo, CNN and other major websites don’t use one web server for accept connections all over the world to their websites.
View 7 Replies
View Related
Nov 19, 2007
My server getting huge number of anonymous user.
Even I had disabled anonymous login at the WHM.
When the max user reach it will make the ftp fail and restart.
It usually reach max user within a 5 to 10 minute.
How to block this?
View 10 Replies
View Related
Oct 7, 2006
what happens when I have 2 DNS servers on my domain and 1 fails?
around 50% of the access fails... or they detect DNS timeout and try the other one, so 50% of the access would just take more time?
View 2 Replies
View Related
Apr 12, 2009
cpanel tech staff say my server
---------------
in a broken state halfway upgraded from centos 4 to centos 5. You'll need to either complete the update to centos 5 or revert to centos 4. Easyapache and some other cPanel functions require that yum be working, but "yum update" on your server currently fails due to the mix of centos 4 and 5 rpm's you have installed
---------------
i want to ask how can i fix the issue?
because i run "yum update",it fail.
View 4 Replies
View Related
Jan 27, 2008
i try to install packages using yum, but at the end yum always say nothing to do
Reading repository metadata in from local files
Parsing package install arguments
Nothing to do
OS centos 5
View 5 Replies
View Related
Aug 29, 2008
So speakeasy decided to jump on the dedicated server business, and I tried them. My recommendation: Do not sign up for a dedicated server with them - that is unless you want to wait more than a month on your server (took them 35 days) in which they will lie to you and make up excuses for why they take so long. Then once they set up your server, expect it to get piss poor bandwidth and not function properly. The customer service takes 72+ hours to respond 10% of the time. The other 90% they don't respond at all. My sales rep apologized more than 15 times to me in the 35 day period I waited on my server claiming they are "new to the managed services business." This was more than obvious - I basically handed them $600 and got a worthless piece of junk which sat idle for 30 days in return.
View 3 Replies
View Related
Dec 26, 2007
I have APF and Brute Force install on the server how can i set so if the same IP try to login ssh 5 consecutive time and it fail it will be ban.
View 4 Replies
View Related
Oct 8, 2009
I am only writing this post here because I used webhosting talk to research my recent purchase of a dedicated server with liquidweb.
I have been a happy liquidweb VPS customer for the last year and have grown my business with them. Last week I decided to upgrade from a VPS to a dedicated server and that is where things went wrong.
Stefan in sales was nice in taking my order and had my new server setup in very little time. I got an email that everything had been migrated and they would do the cut over Friday morning.
Friday morning I awoke to phone calls from my clients saying they were not getting emails, their site was down, etc.
I do some initial research and find out that liquidweb sold me a new dedicated server with old used dirty ip addressees that were blocked by ATT / sbcglobal / pacbell. To compound this problem a week later and three ip changes all of which were blocked I am still being blocked and on their blacklist. See below for list of other problems.
I was transferred to Bret my account manager who has done nothing for me and hung up on me through web today while pleading with him to get someone to help me.
I can only talk to a support supervisor and no one will let me talk to a real manager. I went on vacation to Boston this week and have been dealing with these issues the entire time.
I feel like I have been pawned off and shuffled around from person to person and can not get my issues resolved.
And to throw salt on the wound they billed $209 for a $159 server and then charged me a seperate $10 for 2 days from last month. Stefan assured me this transfer would be done at the end of the month so there would be no additional charges. Another lie.
Below is the short list of all the issues I have had with liquid web over that last since my migration.
Mysql databases were copied over
Email forwarders were not copied over
Email was being blocked by ATT/SBC/Pacbell
SPF records were not copied over
A records were not copied over
They sold me a new server with old drity blacklisted ip addresses.
After three sets of ip addresses I am still being blocked.
I was billed for both my old VPS and my new server when stefan the sales agent told me it would be a seamless migration and I would be billed for the server starting next month.
Can never talk to the same person twice. Have talked to about 20 people total over the talk week no one will take responsibility to get my issues resolved.
Can anyone recommend a fully managed dedicated server that will handle my migration with care and take responsibility when issues arise.
View 14 Replies
View Related
Sep 24, 2009
we are currently planning to implement SAN to our enviroment - VPS hosting.
Al VPS should be placed on the SAN - iSCSI connected to be able live motion etc.
Currently we are fighting with idea of Failover/High avalability.
There has been rumors that dual controller SAN from HP/DELL are much more problematic than single controller versions.
We are also thinking about running some opensource like OpenFiler/FreeNAS/OpenSolaris or NexentaStore on supermicro boxes with SATA or single RAID controller.
But in that case - how make the iSCSI target highly available? Mirroring of the data/space is pretty easy with DRBD or ZFS but when one SAN box goes down, there should be no interruption in iSCSI targe service - no IP change etc..
View 10 Replies
View Related
Apr 5, 2008
I know I have seen a command line you can use which will activate :fail: in all the accounts on the server simultaneously so that you don't have to do each account separately, but I can't find that command.
Does anyone here know what that command is? I'm assuming it would involve /etc/valiases/?
View 4 Replies
View Related
Feb 23, 2008
I have OS fail , now im install new OS on new HDD, how can i mount and get data from fail hdd ?
Here is info:
[root@server-210-245-124-170 ~]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 1971 15727635 83 Linux
/dev/sda3 1972 3929 15727635 83 Linux
/dev/sda4 3930 30401 212636340 5 Extended
/dev/sda5 3930 9151 41945683+ 83 Linux
/dev/sda6 9152 13067 31455238+ 83 Linux
/dev/sda7 13068 14111 8385898+ 82 Linux swap / Solaris
/dev/sda8 14112 14372 2096451 83 Linux
/dev/sda9 14373 30401 128752911 83 Linux
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 30401 244196001 8e Linux LVM
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 13 104391 83 Linux
/dev/sdc2 14 30401 244091610 8e Linux LVM
[root@server-210-245-124-170 ~]#
/dev/sdc is old HDD with OS failed. I wanna mount is and all data to /oldroot folder for copy and restore data.
View 10 Replies
View Related
Oct 6, 2007
I wanted to upgrade proftpd and dit this.
I followed an how-to on directadminforums:
Code:
cd /usr/local/directadmin/customapache/
wget ftp://ftp.proftpd.org/distrib/source....3.1rc2.tar.gz
tar xzf proftpd-1.3.1rc2.tar.gz
rm -rf proftpd-1.3.1rc2.tar.gz
cd proftpd-1.3.1rc2
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var/run --with-modules=mod_ratio:mod_readme:mod_tls
make
make install
perl -pi -e "s/^AuthPAM on/#AuthPAM on/g" /etc/proftpd.conf
/etc/rc.d/init.d/proftpd restart
I changed the proftpd-1.3.1rc2 version to the newest version of proftpd.org
When I run /etc/init.d/proftpd start, I get the following:
Code:
Starting proftpd: - mod_tls/2.1.2: compiled using OpenSSL version 'OpenSSL 0.9.7k 05 Sep 2006' headers, but linked to OpenSSL version 'OpenSSL 0.9.7a Feb 19 2003' library
- Fatal: unable to load module 'mod_tls.c': Operation not permitted
[FAILED]
View 4 Replies
View Related
Aug 4, 2007
I'm using this script (I think I got it off of WHT) to restart httpd whenever a file failed to download on my server.
Code:
#!/bin/bash
FILE=[url]
rm -f test.file
wget -q $FILE -O test.file
if [ ! -f test.file ]
then
/etc/init.d/httpd restart
echo 'ALERT - HTTPD restarted on:' `date` | mail -s "Alert: HTTPD Restarted" user@domain.tld
fi
exit $?
I have it on crontab
Code:
*/5 * * * * /bin/nfup > /dev/null 2>&1
but it didn't seem to restart httpd, I got no e-mail and our site was down for several hours.
Is there anything wrong with the script?
View 10 Replies
View Related
Mar 16, 2007
I have this server with no control panel and dnsreport could not connect to mailservers on all my domains. But the server can send out emails because I'm receiving logwatch emails, etc. I'm also using dnsmadeeasy for my nameservers.
Quote:
ERROR: I could not complete a connection to any of your mailservers!
mail.mydomain.com: Timed out [Last data sent: [Did not connect]]
If this is a timeout problem, note that the DNS report only waits about 40 seconds for responses, so your mail *may* work fine in this case but you will need to use testing tools specifically designed for such situations to be certain.
I tried adding the domains on /etc/mail/local-host-names and restart sendmail but the error is still there.
View 0 Replies
View Related
Aug 19, 2007
i make a dns for reseller client by edit it from edit dns zone and i put the two nameserver and with record type A and i point them to the two nameserver ip
but when someone host with him and use that dns he got in the dnsstuff.com that error
FAIL DNS servers have A records
ERROR. One or more of your DNS servers are missing A records (per NS records that may be cached). As a result, they cannot be used. The problem hostnames are:
well i want to know what's the wrong here?
my server CENTOS Enterprise 5 i686 with apache 1.3.37 with whm 11
Another note : this server not running on main site but run only on the dns (two server one domain name )
View 7 Replies
View Related
Jan 6, 2007
I have a dedicated server with cPanel/WHM and on it is a site with for example user name: domain
The main email user name is of course domain I'd also like to forward admin@domainname.com to the domain user account then any other emails would fail. So say if someone sent an email to sales@domainname.com it would fail unless of course I had an account setup.
Currently I can get admin@domainname.com to foward to the main account box, however in doing so it will also forward everything else.
Is this possible?
View 1 Replies
View Related
Jun 11, 2009
am having 1.8 load average on a new dedicated Core2Quad q8200 2.33GHz server with only 4 accounts on it i think that's weird, the most busy process using more than 98% of the cpu is:
/usr/local/cpanel/3rdparty/bin/php-cgi -c /usr/local/cpanel/3rdparty/etc/roundcube /usr/local/cpanel/base/3rdparty/roundcube/index.php
top command shows the most busy process is:
5418 cpanelro 25 0 21460 11m 4116 R 99.0 0.6 527:01.65 php-cgi
View 8 Replies
View Related
Jun 7, 2009
my datacenter says that they have not had power failures(lol yeh right) but i cant seem to figure out why my server seems to be rebooting randomly. so far its happened early 3-5am my times today and yesterday, just its happened 4x more times this morning.
im not sure if cpanel is sending me bind start failures because its not set to auto start up on reboot or if it might be related... but the server seems fine.
View 6 Replies
View Related
May 21, 2009
So the other day me and friend installed cPanel on a VPS. Everything seems to be working perfectly however the sites don't seem to load.
I've pinged all the domains and they all seem to be fine and the hostname also seems to be setup I'm just not sure why my sites aren't loading.
I've also loaded the site on multiple computers using different dns servers and still no luck.
I haven't touched apache at all, but from what I understand I don't need to.
View 9 Replies
View Related
Dec 8, 2008
how can I implement fail-over web hosting with 2 cpanel account on a separate server to get 100% uptime.
It has frequent database update (1 mysql db) and files uploaded from ftp time to time.
Is rsync is the solution?
View 8 Replies
View Related
May 10, 2007
Ive been having this issue on a box im messing around with. I run custom services that launch an exe file. Everything runs fine while the server is running. But on reboot random custom services fail. Terminal services also fails to start.
The number of services that need launched on restart seems to be random each time. Sometimes services start to fail, at around 70+ being setup. Other times you don't see it failing until 100+ services needs started on reboot.
The server load with all services running is 2-5% and physical memory is about 200 megs of 1gig, paged, is about 300-400 megs used.
It is normally 3-4 custom services that fail on reboot. The ones that fail have the following error in event viewer.
Event Type:Error
Event Source:Aprog
Event Category:None
Event ID:116
Date:5/10/2007
Time:7:08:40 PM
User:N/A
Computer:XXXXXXXXX
Description:
Subprocess monitoring failed due to subprocess is no longer active. The subprocess is probably dead. Restarting the process. Error detail: Overlapped I/O operation is in progress.
It will keep getting this error over and over again. However, if i stop all custom services and then start them, everything launches fine.
When this happens on reboot Terminal services also fails to start. It will not start, until I stop all the custom services. At which point it allows me to start TS without any errors.
Event Type:Error
Event Source:Service Control Manager
Event Category:None
Event ID:7023
Date:5/10/2007
Time:7:02:10 AM
User:N/A
Computer:XXXXXXX
Description:
The Terminal Services service terminated with the following error:
A dynamic link library (DLL) initialization routine failed.
For more information, see Help and Support Center at [url]
What I am trying to accomplish is a way to automatically launch these EXE files, and have something that restarts them if they crash or fail. I haven't been able to find a specific reason this is happening or how to fix it. So I am open to any other suggestions on how to do this.
View 1 Replies
View Related
Jul 11, 2007
My server was running a cronjob backup, and my apache always fail
root@b# service httpd restart
/etc/init.d/httpd restart: httpd not running, trying to start
/etc/init.d/httpd restart: httpd started
root@b# service httpd restart
/etc/init.d/httpd restart: httpd not running, trying to start
/etc/init.d/httpd restart: httpd started
root@b# service httpd restart
/etc/init.d/httpd restart: httpd not running, trying to start
/etc/init.d/httpd restart: httpd started
I can only restart them on my CPanel WHM
Attempting to restart httpd
Waiting for httpd to restart.... . . . . . . . . . . finished.
httpd status
root 5805 0.8 0.9 21092 19504 ? S 22:39 0:00 /usr/local/cpanel/whostmgr/bin/whostmgr ./reshttpd
root 1012 4.0 0.6 23348 13828 ? Ss 22:39 0:00 /usr/local/apache/bin/httpd -DSSL
httpd started ok
root@b# service httpd restart
/etc/init.d/httpd restart: httpd restarted
View 14 Replies
View Related
Jun 13, 2009
I have a server with serverboost.nl and my site is not reachable via some networks. We have done a both way tracert and it fails after few steps. I am not sure how many networks give this error but I have already received few complaints from regular visitors to the site.
1. Who/ what networks should I contact to resolve this issue? I ave already asked ServerBoost.nl and they said TRACERT fails at Cogent network.
2.Cogent replied saying the following
"Thank you for the trace example. What you were seeing was the 1st and last hop on the Cogent network mpd01.iad01. The very next hop then transfers over to the Savvis network. I have completed a successfully trace to the destination.
mpd01.iad01#trace
Target IP address: "MySiteIP"
Tracing the route to "MySiteIP"
1 savvis.iad01.atlas.cogentco.com (154.54.12.26) 0 msec <----- 1st hop of Savvis's network
ber1-ge-7-43.virginiaequinix.savvis.net (208.173.10.181) 0msec
ber1-ge-7-39.virginiaequinix.savvis.net (208.173.52.105) 0msec
2 cr1-tengig0-7-2-0.washington.savvis.net (204.70.197.242) [AS 3561] 0 msec 4 msec 0 msec
3 dcr2-so-0-0-0.amsterdamamx.savvis.net (204.70.194.122) [AS 3561] 96 msec 96 msec 100 msec
4 acr2-so-0-0-0.Amsterdamamx.savvis.net (204.70.193.149) [AS 3561] 96 msec 96 msec 96 msec
5 so-0-1-0.br3.ams.we-dare.net (208.174.49.170) [AS 3561] 100 msec 100 msec 96 msec
6 ge-1-1-0.br1.ams.we-dare.net (84.244.188.249) [AS 20495] 96 msec 96 msec 96 msec
7 ge-1-1-0.cr1.rtd.we-dare.net (217.148.164.3) [AS 20495] 100 msec 104 msec 104 msec
8 "MySiteIP" 100 msec 100 msec 96 msec
mpd01.iad01#
Thank you,
Kenneth Abernethy
Customer Support Engineer"
3. TRACERT from Visitor to My Site and vise versa
Tracing route to MySite.com ["MySiteIP"] (from client IP "ClientIP")
over a maximum of 30 hops:
1 1 ms 1 ms 2 ms 192.168.1.1
2 9 ms 9 ms 9 ms 10.35.180.1
3 10 ms 7 ms 10 ms vl-201.gw03.ktgc.phub.net.cable.rogers.com [66.185.90.49]
4 22 ms 7 ms 7 ms gi-3-0.gw01.ktgc.phub.net.cable.rogers.com [66.185.81.121]
5 15 ms 13 ms 14 ms 64.71.241.93
6 25 ms 27 ms 27 ms 69.63.248.42
7 46 ms 74 ms 179 ms te1-5.mpd01.iad01.atlas.cogentco.com [154.54.12.89]
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Tracert from server [MySiteIP] to client [ClientIP]
==============================
/root$ tracert "VisitorIP"
traceroute to "VisitorIP" ("VisitorIP"), 30 hops max, 40 byte packets
1 213.163.91.1 (213.163.91.1) 0.559 ms 0.833 ms 1.117 ms
2 10ge-3-1-0.br1.ams.we-dare.net (217.148.164.1) 1.353 ms 1.356 ms 1.507 ms
3 ge-0-3-0.br3.ams.we-dare.net (84.244.188.250) 1.749 ms 1.761 ms 1.840 ms
4 acr2-so-5-0-0.amsterdamamx.savvis.net (208.174.49.169) 1.744 ms 1.750 ms 1.827 ms
5 acr1-so-6-0-0.amsterdamamx.savvis.net (204.70.192.157) 1.732 ms 1.814 ms 1.938 ms
6 * * *
7 * * *
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
22 * * *
23 * * *
24 * * *
25 * * *
26 * * *
27 * * *
28 * * *
29 * * *
30 * * *
View 2 Replies
View Related
Feb 7, 2008
running WHM at Fedora 6... WHM 11.11.0 cPanel 11.16.0-R18546
I have a problem with spoofing spammers.. my queue is plenty of non-delivered emails from externals SMTP, sended to NON-existents address on my server...
The question is the destination domain (mydomain.com b.example) has already its ":fail: No Such User Here" alias.
SMF records applied, but not the most external SMTP servers checks them nowadays...
Using :fail: the email is never accepted into the server. During the initial SMTP negotiation when the senders SMTP server connects to your SMTP server, the sending SMTP server issues a RCPT command notifying your server which email address the email to follow is intended for. Your server then checks whether the recipient email actually exists on your server (a POP3 account, an alias or a catchall alias) and if it does not, it issues an SMTP DENY which terminates the attempt to deliver the email.
Well, in my case it justs receives message and then frozen it!
Some more data:
IN MY QUEUE:
1JMoh4-0004UG-Pz-H
mailnull 47 12
<>
1202321302 0
-helo_name luatvietnam.vn
-host_address 203.162.168.16.1839
-interface_address 85.x.x.x.25
-received_protocol smtp
-body_linecount 50
-max_received_linelength 93
-frozen 1202407547
-host_lookup_failed
-manual_thaw
XX
1
dlsex-ireddols@abrasivoshermes.com
210P Received: from [203.162.168.16] (port=1839 helo=luatvietnam.vn)
by myserver.mine.com with smtp (Exim 4.68)
id 1JMoh4-0004UG-Pz
for dlsex-ireddols@mydomain.com; Wed, 06 Feb 2008 19:08:23 +0100
069P Received: (qmail 6913 invoked for bounce); 5 Feb 2008 09:04:11 -0500
032 Date: 5 Feb 2008 09:04:11 -0500
032F From: postmaster@luatvietnam.vn
039T To: dlsex-ireddols@mydomain.com
024 Subject: failure notice
WHEN TRYING TO DELIVER FROM QUEUE:
Message 1JMoh4-0004UG-Pz is no longer frozen
LOG: MAIN
cwd=/usr/local/cpanel/whostmgr/docroot 4 args: /usr/sbin/exim -v -M 1JMoh4-0004UG-Pz
delivering 1JMoh4-0004UG-Pz
LOG: MAIN
** dlsex-ireddols@mydomain.com F=<> R=virtual_aliases: No Such User Here
LOG: MAIN
Frozen (delivery error message)
AT LOGS (first time):
2008-02-06 19:08:17 SMTP connection from [203.162.168.16]:1839 I=[85.112.9.44]:25 (TCP/IP connection count = 9)
2008-02-06 19:08:20 no host name found for IP address 203.162.168.16
2008-02-06 19:08:22 H=(luatvietnam.vn) [203.162.168.16]:1839 I=[85.x.x.x]:25 Warning: Sender rate 0.0 / 1h
2008-02-06 19:08:23 1JMoh4-0004UG-Pz <= <> H=(luatvietnam.vn) [203.162.168.16]:1839 I=[85.x.x.x]:25 P=smtp S=2405 T="failure notice" from <> for dlsex-ireddols@mydomain.com
2008-02-06 19:08:23 cwd=/var/spool/exim 3 args: /usr/sbin/exim -Mc 1JMoh4-0004UG-Pz
2008-02-06 19:08:23 1JMoh4-0004UG-Pz ** dlsex-ireddols@mydomain.com F=<> R=virtual_aliases: No Such User Here
2008-02-06 19:08:23 1JMoh4-0004UG-Pz Frozen (delivery error message)
2008-02-06 19:08:24 SMTP connection from (luatvietnam.vn) [203.162.168.16]:1839 I=[85.x.x.x]:25 closed by QUIT
View 1 Replies
View Related
Oct 19, 2007
My POP services keep failed daily between 10am-4pm central time. Rather strange.
However, sometimes some people can't access pop services, while others still can.
I thought it was a SpamAssassin issue as it was overloading a little bit due to corrupt files. Fixed that, and problem persists.
CentOS 4.x
cPanel 11.x
SpamAssassin 3.2.x
View 7 Replies
View Related
Mar 15, 2014
I have changed to mod_filter from AddOutputFilterByType and now cannot rewrite the body content of a 302 page. I can rewrite the Location header using mod_headers, but I need to modify the informational content of the 302 page (usual a href "page has gone here") message as the source app puts internal details on the page.
FilterDeclare FILT
FilterProvider FILT SUBSTITUTE resp=Content-Type *
FilterChain FILT
Substitute "s|http://secret-stuff|https://public-stuff.com|ni
View 1 Replies
View Related
Jun 4, 2014
At times as I'm developing, due to some coding error in PHP on my part, particularly calling a COM object, the apache server crashes. I'm delighted that it recovers, but in so doing it always tries to rerun the query that crashed it, which just causes another crash, and so on. Is there some way of getting round this, so that it recovers but the problematic code is not rerun?
XP SP3 (still!)
Apache/2.4.3 (Win32) mod_fcgid/2.3.7 PHP/5.4.9
Firefox (Aurora)
View 1 Replies
View Related
