I have just removed my servers and switch from a data centre in london only to find that for the last 6 months since I last visited the data centre some one has had one of there switches plugged into my power strip. When I approached the provider about this they claimed it would have not affected my charges for power consumption because they were monitoring the power of each server.
Is this possible for a provider to monitor the power for each single server on a power strip that I own? or are they just trying to get them selves out of trouble for the fact they have been over charging me for power for the last 6 months?
I was hosted by this guy who did not tell me he was being hosted by someone else. I paid him about 10$ less than his current host, but still I paid him. As it turned out he had only paid his hosting bill once and that was the very first day he had hosting. Since then they suspended him and me also.
Now I have found out the host that hosted him and they will not give me my files unless I pay them what he owes them. I have read their TOS and in no where does it say anything about this. This is really stupid in my opinion. How can they make me pay for their mistakes. They are the ones who let him go 4 and a half months without paying and never suspended him.
If you are hosted at Gl0bat.com, you should be aware that Gl0bat is poaching traffic away from your site. Gl0bat has added new 404 file not found pages. The domain name of the account holder is displayed right above a search box that advises it will search this site, but returns sponsored ad results. Below is a listing of the favorites of the domain name that also returns a bunch of advertising. These error pages use the domain name repeatedly, but do not offer any link to get back to the domain. So Gl0bat is hijacking domain names away from their customers and associating questionable links with customer domain names.
It even has a search box that says "Search" which implies you're searching the site but it goes straight to information.com to which Gl0bat gets a kickback from.
This is wrong. They are stealing your visitors, your CUSTOMERS away from you and redirecting them to another site.
Protect yourself and setup a custom 404 page right now. I'm working on doing this and I hope this solves the problem.
Gl0bat's one-click install is also very outdated. The software they install is not the current version but very old version with security flaws in them. They also have PHP register_globals set to ON which is another security hole. This hole and the old software allows for sites to be hacked more easily.
There is a lot I know about godaddy and I also wrote some on my own website, but it's long so I'll post only one issue here. This company is being very dishonest. They pretend to be the cheapest one in the market, but they charge you extra for so many reasons. For example, it's the only company I know who charges 25 cents more per domain per year than the price advertised. It doesn't matter what's their excuses, ICANN, SHMICANN, they advertise one price and they charge you another. Let’s begin with that. (I think I might saw they changed it to 20 cents, but it doesn’t matter. 5 cents don’t make them honest).
Also with web hosting, they offered me an incredible price of about US$ 3 dollars per month, and even gave me a discount for paying in advance for two years (24 months) and I paid only $2.50 per month (about $60 for 24 months). They had a plan for 5GB and also another plan for 100GB which was something like $6 per month and I didn’t need it. Why pay for 100GB when I need only 5? Actually I could use 10 but I don’t need 100 so I paid about $60 (don’t remember the cents) for 24 month.
Now, I was using their web hosting for backup and I wrote a script which will do it automatically and it happened that I used more disk space, something below 300MB which I calculated to be only 6% of the 5GB I asked. I didn’t even asked them to use extra disk space but when I used more disk space they sent me and email and then after a few days (I think about 5 days) they charged me extra of something like $6.79 per 100MB per month. Actually I was away from home and didn’t have a computer and when they wrote me about it I thought they were charging me extra of $6.79 for 100GB (Gigabytes!) and not Megabytes and when they wrote me they charge it 3 times I thought they meant 3 months. I still didn’t need it and I asked them to cancel it but they asked me to remove files and I was very busy with other things (actually I’m not a full time webmaster) so eventually it took me about one month and I removed the extra files, but they still charged me with extra of $20.37 per month (if I remember the cents… I never forget people who cheat me) and when I wrote them they also asked me to enter their website and remove the extra disk space myself, and when it didn’t work they asked for screen copies and I had to send them so many emails (actually it took me a few months because I was very busy with other things) and eventually I called them from my mobile phone (my Skype didn’t work properly) and after speaking to their representative he agreed to refund me most of the charges except one, he still insisted they have the right to charge me the extra $20.37 for using 6% more of their disk space for less than one month.
Now you can do the calculation yourself! I paid about $2.50 for 5GB per month (about $60 for 24 months) and they charged me extra $20.37 for 300MB which is $339.50 for 5GB or more than 100 times their regular price! Actually they charged me 4 times $20.37 which is more than $80 and the whole deal with them was $60 for 24 months! Actually if you check the prices of their “extended” web hosting it’s something like 100GB for about $6 per month (if I remember correctly) and if I paid $6.79 per 100MB extra then I would probably pay $6,790 which is more than 1000 times of their regular price!
I know a lot more but I don't want to post long posts here so I put some of it on my website. There are also other companies such as Google, they displayed "Action canceled" on my website www.speedywhois.com (currently .net) instead of their ads ("adsense"). I put a copy on my personal homepage with more details and I would like to know where I can discuss google adsense and other companies related to webmasters.
I hope this website is not affiliated with godaddy and this post will not be deleted. I don't want the $20.37 but I want you to know they are ripping you off. charging 100 to 1000 times the regular price is theft, it's like if they offer you a cup of coffee (or actually force you to take it) and then charge you $6,000 for the cup. I never asked to pay $20.37 per month and all I agreed to pay was about $2.50 per month and the extra $20.37 is for 6% extra disk space I used (slightly less) so they are ripping me off!
If you want to see details and proof then please see this post and the following posts: ....
I have a question regarding people who are stealing content off my site (using the same URL of my site). I would like to make a rule (in .htaccess, I imagine) that does the following:
If the graphic is placed on the desired domain, put the correct graphic in place. If the graphic is placed on another domain (stolen), put a 'substitute' graphic in place that says that the content was stolen.
I know you can do something along these lines (I used to have an .htaccess that prevented people from linking to pages outside of designated domains) but I'm not sure if you can narrow it down much more. However, it would rock if it was possible.
do dual power supplies use more power than a single supply?
E.g. Say I have a server than uses two amps, powered by a single power supply. Now if I switch to a dual supply (and say each supply has the same efficiency rating as the single), does my server use more power? How much more?
My simple view of this is that it probably does, but maybe not much. The second power supply consumes some power itself, but since its not under load, it doesn't consume much. Therefore, my server with redundant supplies might use 2.1A or 2.2A.
I just signed my agreement for 2 cabinets at Internap's Atlanta CoLo. For now, I will just have 1 120V 20A circuit in each cabinet.
At my office's server room we currently have 8 circuits I am powering my 2 racks from. I am just curious how many servers you can typically put on a 20A circuit. I am also considering adding two additional power feeds (1 more for each cabinet) to have truly redundant power for my dual power supplies.
I am hoping that 20A is plenty for my needs. I have around 20 HP and Dell systems. Mostly HP DL380s and Dell PE2950s.
Any ideas? I am splitting them in half, only filling up a half of each cabinet for now, as we are growing quickly and I wanted to overguy space so I would not be forced to add another cabinet later and have it end up somewhere else in the DC.
I wonder if any colocation providers here have any tips for measuring power. Currently I'm using APC 7900 power strips with amperage meter. I'm not a power expert by any means but I want to be able to calculate whats the cost having a server drawing 2 amps 24/7 365 days week.
Our secondary site gave us a whopping power bill, and at our own data center we never considered charging our customers for power.
I need to know what happens when a rack has capped its (lets say) 5A limit. I'm trying to calculate what exactly I can put into a rack and am considering that not all servers are going to be 100% load, as that would be bad performance anyway.
I guess it could do the following (but really don't know):
Cap performance of all servers
Cause system failures
Trip
The rack would have servers, a switch and perhaps a Remote Power Strip and Firewall. I don't know how they would be affected.
how much power the average hard drive would use? (ie a 1tb drive). I was looking on WDC's website and it said 7.5 watts peak durring writing and reading etc, so assuming thats at 110 voltage, would it be safe to assume that 12 drives @ 7.5 watts each would make a total of .81 amps? I am going off of the equation that Amps = Watts/Volts. So amps = 90/110
"Can i host a small forum at a 64mb ram vps with lighttpd and mysql? How many users can i have online?" I said that he can do that.Is this answer true?
We are transitioning from an on-site data center to a collocation facility and are having problems negotiating the right amount of power, the type of connections, and the PDU power strips that we need.
For simplicity lets say that we are going to rent a 10 ft by 10 ft cage area. This should house 4-5 rack cabinets.
The amount of power we are given for this area varies with the lowest being 120 watts/sq. ft and the highest being 175 watts/sq. ft.
With 120 watts per square foot that comes out to about 6.25 circuits that are 20 amps for a 10x10 space.
For the initial setup we would have a Cisco 73xx Router, a HP 26xx switch, an Avocent IP KVM, an EMC CX3-10 SAN, and our Dell PowerEdge 2950 III servers (4).
Using the calculator at: dell.com/calc I show the power requirements for all of the Dell equipment to be:
C13 Power Cord Qty: 12 Amperage on C13 Cords: 26.49 amps System Heat/Power: 2754.6 watts Total Current: 13.24 amps
The way I was envisioning this was Rack 1: Router, Switching, KVM on a 20 amp circuit and Rack 2: Dell Equipment on a 30 amp circuit. Is that right?
Additionally, I'm confused about single phase vs. three phase power in the data center and what most people choose to implement. I've heard talk of getting redundant power in each cabinet but that seems like you limit yourself to half of your space doing it that way.
And the last thing is it's confusing about what type of PDU you need to put in your racks to make it all come together. All of our equipment should be using IEC C13 cords and we're thinking about going with Avocent for all of the KVM/PDU so we can centrally manage it.
It seems to me that if the cost is roughly the same we should be pressing as hard as possible for the highest watts/square foot since that seems to be one of the most important commodities in any data center.
How much does a typical quad core Xeon eat, say an E5410 or a E7320? a 2GB RAM stick? A 500-750GB SATA disk? How much is the system overhead for a 1U unit? I tried to find data on this without too much success. For example Intel says the same number (80W) for an 1.6GHz CPU and a 2.4GHz one -- that does not sound too reliable to me.
If this is too abstract, then I would like to ask aobut the real world power consumption of two boxes. 1 E5410, 8GB of RAM, 2 SATA disk maybe 10K RPM. The other will have two E7320, 24-32GB of RAM and 3 10-15K disk.
I have been interested in setting up my own server for hosting a website and a small online game I created. My only problem is how good of a server I would need to get.
My potential colo provider is saying that a 5A circuit comes standard with a 1/4 cabinet and that they charge $20 per amp over that. I will have (6) Dell 1650's with dual 650W PSU's. Any idea how to calculate how much actual power I will need for this configuration?
Im currently going through my tool box of parts and was thinking of building some cheap dedis for my customers. Unfortuantly the only hardware I can find is SocketA AMD 3200 (Barton Core) processors but Im unsure of the power they pull in amps.
The setup I would be looking to us is 512mb RAM, 80gb Hard Drive, Socket A 3200 XP processor.
I'm working out the power needs for running two Bc's ( each with 10 blades @ dual 2.8 with dual ide disks, 2x mgmt & 2x 4port Cisco sw ) and am quite frankly going in circles!
The rack will also host a 3550 swith, Vyatta fw ( dl360 ) and a TFT slide out job.
Now using the IBM calc i'm getting figures of around 20amps? Which sounds fair enough for 20servers, but is this correct and would have been better off with a mix of 1u's and 2u's?
Seems the cost saving on the blades will be outdone on the power consumption.. if so that's the last time i watch an IBM tv add!
I maybe interested in co-locating a server but looking from the power max for a 1U server of around 0.3Amps I'm wondering if it will be easy.
Doing the equation 0.3 * 240 gives me 72watts I believe. (Where 240 is the voltage for the UK). So with this, it doesn't give me much choice considering most processors run around 90watts and that doesn't leave any room for the power from hard drives and memory. Does anyone know what the average power consumption is for hard drives and memory?
I'm not looking for a really power system, but I would like something that if I pull it out of co-location that I can still use it one way or another. So was looking at an AMD Athlon 64 X2 where there is a 34watt version that is seemingly discontinued. Or use an AMD Turion X2, which are again hard to find, with a mini-itx board. Running with the mini-itx board, there is also the Intel Core 2 Duo which I can get quite easily.
Does anyone else co-locate and how to you manage the specification?
at building 10 new servers to sell to our customers as dedis but are I am unsure of how power hungry the processors are.
The two options I am looking at are:
# E6600/E6400 Core2Duo Processor # AMD X2 Energy Efficant 5000/4800/4600 Range
All the same setups are using just the one harddrive (SATA2 80gb) with 1GB RAM all on a budget motherboard. While I have seen Heavily used Core2Duo systems pull over 0.7amps (with 4gb ram and 2 hard drives) I am unsure which processor setup will use the less ampage. We are running these at 230v so had anyone got any ideas how much ampage these may pull and which would use the least ammount of power?
Recently Rackspace experienced an outage caused by their generators. I would not open this if its wasnt because in the last 10 years everytime there is a power outage on a DC the generators failed. (this is not a rackspace post, i just took 1 of 100 examples)
I dont want to mention names but I have seen plenty of DCs on which generators fail when the task is loaded to them. Some people said its because the maintaince is expensive and they dont do it on time.
Thats not always the case as I have seen DCs which made their maintainces on shape and time and they also had problems.
Now my question is if putting up generators costs so much money and we see them fail over and over again, are they up the task and worth the investment?
We know network only needs a short time without power and all is lost. This topic is ratter an approach on how to best handle power loads. Im sure there must be some way to actually be sure that when power FAILS, generators will keep up the task. The most sure testing would be to actually shift load to the generators every some months to test them but that would be plain Crazy on a production datacenter. I see that most outages have always the same guilty gear, generators...
Lets take another example, Gmail recently failed big time, because some Google DCs dont have chillers to keep the DC from getting hot (New Europe DC) for example. On hot days they shift the load to other DCs and turn the DC off. That of course failed too on a real scenario. Now Google is not a standard DC, but if they keep such a risky scenario in place they must have a sure way that power will keep up when the load is shifted and there is a big peak.
Will there be a better solution in the next 10 years for power or are we going to keep hoping generators dont fail exactly when we need them the most. Maybe we all should have UPS (plenty)on a rack to keep the power until the DC brings up generators, but thats useless if the network is affected as well and it always is.
I have a client which run an active CMS and the server is utilizing the swap space at the moment. It is running on 6GB memory and a Xeon processor now. Is there anything that I could do before going for hardware upgrade? The apache and mysql keep exhausting the memory during peak hours.
I recently bought a 2nd hand HP/Compaq ProLiant DL360 G3.
I've been checking some places to co-locate, rapidswitch & racksrv both look good but I'm still trying to figure out how much my peak power usage is during start up.
I've been googling to try and find out how, but I have had no luck.
So basically, my question is, How can I measure the peak power usage(in amps) during start up?
Sorry if this has already been asked(I did do a search but didn't find anything relevent).
the specs are: Processor: 2 x Xeon 2.8GHz Memory: 1.5GB RAM (looking to upgrade to 3GB) Hard Drive: HP 36.4GB Ultra320 10K SCSI Hot Swap
I'm thinking about setting up a forum for my school, and I thought it would be better to go with a Vbulletin or IPB script for the forum. I don't really want to buy a lifetime license, so I looked at the IPB official hosting section and I have some questions. Has anyone used them and know how good their hosting is?
My nearest major city is Manchester, so naturally I'm looking for rackspace in the region.
Unless anyone has better suggestions, I'm thinking of going with NorthernColo. They start at £50/month but jump to £70/month if you draw more than 1A of current.
If my basic physics is anything to go by, 0.5A at our 240V means a maximum server power rating of 120 watts.
...are there any dual-core / 2GB RAM box configurations which consume less than 300W thesedays? My own USB mouse for my laptop consumes 50mA.
Otherwise I'm begining to think of their 0.5A pricing as being a bit of a scam, since the 1A price also pays for 2U worth of space.
Is there any such thing as a fused power cord that would trip the offending device instead of everything on the UPS outlet? The only ones I can find are UK form factor.
The company I work for is starting to have some cooling issues in our server area. We have basically doubled our server equipment in the room without upgrading the air conditioning unit in the room. Temperatures are getting really high in the room (sometimes reaching 85F which is just WRONG!) and we are trying to get it replaced.
Since my boss is the one making decisions I thought I would try to help him out a little bit with some of the information/calculations he needs.
My questions are:
1. When calculating watts for a redundant power supply do you double what the power supply is rated for? So on one Dell PowerEdge 2950 it shows that I have a 750W redundant supply. Would that be 1500 Watts?
2. Do you calculate your cooling needs for max wattage or do you calculate a percentage of what each power supply is rated for?
3. What percentage would you multiply your final total Watts by to accommodate possible future additions? 10%? 25%?
We currently have: 2x PowerEdge 2950 - 750W Redundant 1x PowerEdge 1950 - 670W Redundant 2x PowerVault NX 1950 - 670W Redundant 1x PowerVault MD3000 3x APC Smart UPS 3000 1x APC Smart UPS 1400 2x PowerConnect 6224 2x PowerConnect RPS-600 3x PowerConnect 5324 1x Cisco 2801 1x Cisco 2821 3x Unknown wattage servers redundant power(All the same specs) 1x Unknown wattage server redundant power 1x Unknown wattage single power supply Then a few other small devices like external modems, KVM and a small-mid sized phone system.
I am not an electrical expert but I am calculating that it is going to be about 10,000 - 12,000 Watts?