My website is hosted locally on my network, so I'm unable to view the .com address for it (i can only access through the local IP address). This makes it really hard to test throughly.
Is there any way to view this website from how it would be outside the network? I know i can do it from another location but I need a solution that is right here. I do not have a off site computer i can remote desktop to either.
I currently have an Apache server running PHP and Mysql on my MacBook Pro.
I also have a copy of Parallels running, which hosts a Windows OS. In OSX, I have multiple VirtualHosts set up, and they all work great when accessed from OSX. All the sites are within my "Sites" directory. Now, when I browse to my Macs ip address in windows, I only get shown my Sites folder, and get shown the directory.
How would I be able to access these local sites as I do in OSX? I have tried configuring my hosts file in Windows, but it doesnt help.
I need to make a bash script, when I run it ./script.sh it needs to vivit a website - [url]/something.php where something.php has some function, e.g for emails, so when someone visit something.php it sends email to my email address. I just need a way to visit it via bash script
View 10 Replies View RelatedI just saw that my website has been COPIED
I need to report this site to the thiefs hosting provider. However I cannot seem to find out where this website is hosted at!
The website that copied my site is www.hithosters.com . I need to find out where this website is hosted at..
Not sure where this belonged so put it in web hosting as it could cover dedicated, colo or shared.
In a couple of months I am going to be launching a new e-commerce website for the company I work for, so it is absolutely vital that the website never goes offline, otherwise I will be in deep ****.
It will be hosted on a server that has been built to be very redundant; 2x Hotswappable Redundant PSU, 4x Hotswappable HDDs (RAID 6), Redundant NIC.
Sods law though to achieve this redundancy it will need to be on a colocated server, so if there is a major problem like the motherboard dying, then I will have to get down to the DC (3 hours away) and replace the entire server. Which wouldn't be practical as we would need a replacement server, all setup and ready to go, to do that.
Also, if there is a problem with the data centre itself, then we would be stuck until it is resolved. I have hosted sites with data centres in the past that experienced power or network problems which sent the sites down and it was totally out of our control to either prevent the downtime or restore the sites.
So to increase redundancy, and minimise downtime, I was thinking of load balancing between two servers. But then I assume they would both have to be hosted in the same data centre.
I was also thinking of having the site hosted on the server, but having some shared hosting (or a cheap dedi) ready to go just to fall back on if the server goes down. That way I can forward requests to the shared hosting as a temporary measure whilst the main server is restored. But the problem with that is I would probably need to get another SSL certificate. I would need to get the payment gateway provider (protx) to change the settings for the IP of the shared hosting, which knowing them will take 72 hours to process.
Budget really isn't an issue here if it can be justified, just looking for some ideas at this stage. There is no way this site can be down for a second longer than it needs to be.
Is a joomla website hosted on windows a safe option.
View 2 Replies View RelatedI have compiled apache with below configuration
./configure --prefix=/app/apache2_4 --with-apr=/app/apache2_4/apr --with-apr-util=/app/apache2_4/apr-util --with-pcre=/app/apache2_4/pcre/ --enable-ssl --with-ssl=/usr/bin/openssl --enable-modules=all --enable-mods-shared=all --enable-proxy --enable-mime-magic --enable-rewrite --enable-speling--enable-mpms-shared
But after compilation I have added expiry,deflate headers but I am not able to see either ETAG and LAst-modified header...
I have a LAMP server at home and in my website I added a php form using gmail smtp but Im not receiving any emails from the form. Do I need to add something to my server? Im using the free contact form from this website [URL]....
View 9 Replies View RelatedIs there a host in nothern NJ I can park my own boxes with and have physical access to?
View 11 Replies View RelatedIs it possible to have the complete enviroment of a dedicated server localy so i can do some tests?With Centos OS.
View 7 Replies View RelatedI'm moving from my old XP PC to a new PC with Vista (a mistake, but that's a different story).
I'm trying to set up some sites in IIS so that I can develop locally without having to publish to a remote web server.
I've installed IIS7 from the control panel, and am now looking to set up my first site. I've put the site name in, and the path to the site on the computer, but I'm getting an error in the 'bindings' section. I've left all of this empty because I don't know what it means (it didn't ask for any of this in IIS on XP) but when I try to add the site it gives me the following error:
"The binding '*:80:' is assigned to another site. If you assign the same binding to this site, you will only be able to start one of the sites. Are you sure that you want to add this duplicate binding?"
Does anyone know what to do here? I'll need to add about 100 domains to IIS so I want them all to be accessible locally. How do I do this?
I've been having troubles with my website recently . I installed a forum software (MyBB), and the problem started happening shortly after. I've talked to a few site admins in the MyBB community but they all say that none of MyBB's scripts are capable of doing this.
Every single webpage i visit redirects me to a webpage which then has a redirect loop. I've removed all recent changes made to my website via FTP and restarted apache, but i'm still receiving the same error. I'm not quite sure what to do.
Link to my website: ript.onl
Screenshots: [URL] ....
Every single webpage does this. I dont have any .htaccess files around and i've checked a few config files for anything out of the ordinary, but haven't seen anything.
if it was possible to install Plesk locally on my laptop as I need to do some testing and integration with it. I am running Windows Vista Home Edition.
View 5 Replies View RelatedPlesk delivering email locally to a not existing mailbox instead of sending it to an external party. First I was using a local mailbox, but my client wanted to control the email using their own server. So I've changed the MX records to this new server. Deleted the inbox in Plesk and turned off Mail support for this domain.
New situation: DNS server for domain.com is hosted on a different location and points to my Plesk server for the website and the MX records point to the clients server for the mail.
Email send from email addresses like gmail are send correctly to the clients server. Email addresses from my PLesk server and forms from the website are send locally.
I've a box running Linux Plesk 12.0.18 + Postfix and hosting mydomain.com. Email service is hosted by an external provider.
The problem is that I can't write to postmaster@mydomain.com because Postfix tries to deliver it locally.
What I've already done:
Configured MX record on DNS to point the external provider's server.
Disabled mail service for the TLD from plesk panel or with:
/usr/local/psa/bin/mail --off mydomain.com
The problem still remains.
I think I'm facing on Plesk 12 the same problem described here and elsewhere on this forum for Plesk 9: [URL]
We need to upload to a virtual server (managed with Plesk 11.5) a Wordpress site developed locally. We made this operations without problems many times on other hostings managed with custom panels, non-Plesk.
On the virtual server with Plesk, however, once the files are uploaded via FTP, the database via phpMyAdmin and updated the Wordpress configuration file, when you go to visit the website, it does not display anything and the browser opens the download window for a text file called "download" that contains the code of the file index.php of WordPress.
Here's my problem:
1) I have a website running on a Linux server somewhere
2) I have a big hard drive at home with a bunch of videos.
3) I want to be able to manipulate the videos at home from the server. I want to be able to do this like run ffmpeg commands on it to get the video length, or create a thumbnail from any frame of the video.
Here are the caveats:
- I do NOT want the complete video to be uploaded to the server every time i have to manipulate a video. In the case of thumbnailing, the processing should be done on my home computer, but the output should be copied over to the server.
- Speed is not an issue. This doesnt have to be the fastest solution in the world.
- My home computer is running linux now, but I can change it to whatever I want.
- My server is a shared host; I do not have full root access. However, my host is kind enough to give me reasonable leverage.
I'm thinking the way that this could happen would be by mounting my home computers disk on the server so that I can access the files "locally". I don't know how to do this though, or even if this is the right way to do this.
If I type google.com in my address bar, it forwards me to www.google.com. This is not happening for my website right now. I think its a good idea to do this, since then search engines will have only 1 main URL for the website to index.
My question is:
How do I implement this? I think this may involve mucking with CNAME settings...
I want my users to be redirected directly to my forum
so when they type in www.mywebsite.com it will redirect instantly to www.mywebsite.com/forums
I know this can be done on Cpanel... any other ways?
Does anyone knows any hosting company who sells VPS or Dedicated servers using RackSpace Datacenter / Network?
So in a simple way, im looking to find Rackspace "resellers", if possible one that sells VPS.
we provide a community portal for our users, we run the possibility of setting up a mail from us. Since we have limited experience with anti-spam configuration and we do not like spam bothering our users, looking for suitable "hosted antispam solution.
The requirements are:
- 1 domain
- Unlimited mailboxes
- Unlimited by mail
Can anyone recommend me Good companies to use Hosted Exchange.
View 3 Replies View RelatedI'm thinking of getting a small shared account with GeekStorage, just wanted to see if any others were happy with them? A quick search revels a few negative threads about load/downtime but most seem quickly resolved.
View 12 Replies View RelatedI come to you the community to ask can I host a vps and a domain together on the same domain.
Okay so hears how it is I buy a vps from www.site1.com and then a reseller from www.site2.com can I then host these both on www.mydomain.com with out any problems setting up accounts on the vps or reseller?
Are there any providers out there that offer Hosted MailFoundry appliances for a monthly price?
View 4 Replies View RelatedI currently host exchange 2003 and we are in the process of building up an exchange 2007 solution. Anybody have any links or whitepapers on the setup? I am stumbling on some permission issues - particluarly with the address lists - with the new exchange server roles.
View 14 Replies View Related