VPS - Numfile Errors From Newsletter App

Jun 10, 2008

My current VPS has told me that sending 10000 emails using a newsletter system is not possible in a VPS environment, it seems i cant send over 200 at one time without numfile errors and exim bugging out, is this to be expected? They have told me i need a dedicated server that is highly tuned which to be honest sounds like overkill to me. Should i expect this from all VPS providers ?

(I wont mention my VPS provider as they have been very helpful in all other ways and it may be that they are completely right and i do not wish to affect their reputation here)

View 2 Replies


ADVERTISEMENT

Black And Yellow Zone Alerts For NUMFILE On My Vps

Jan 31, 2007

can any1 tell me if this is ok for 3 or 4 days i was having Black and yellow zone alerts for NUMFILE on my vps, vps has 256Ram,1024 burst, using centos, virtuozzo and cpanel

somehone can tell me what else to check,

Code:
root@ns1 [~]# cat /proc/user_beancounters
Version: 2.5
uid resource held maxheld barrier limit failcnt
399: kmemsize 8507424 8831248 59228160 60948480 0
lockedpages 0 0 1536 1536 0
privvmpages 90223 93110 262144 270008 0
shmpages 3279 3279 129024 129024 0
dummy 0 0 0 0 0
numproc 86 89 500 500 3736
physpages 47988 50219 0 2147483647 0
vmguarpages 0 0 65536 2147483647 0
oomguarpages 49398 51629 65536 2147483647 0
numtcpsock 47 51 1880 1880 0
numflock 12 13 1128 1236 0
numpty 1 1 64 64 0
numsiginfo 0 1 1536 1536 0
tcpsndbuf 436020 467324 10321920 16220160 0
tcprcvbuf 770048 802816 10321920 16220160 0
othersockbuf 34888 39360 6756480 12582912 0
dgramrcvbuf 0 0 1572864 1572864 0
numothersock 30 34 2160 2160 0
dcachesize 1012491 1047191 13639680 14499840 0
numfile 4370 4487 8192 8192 6491
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 298 298 2000 2000 0
root@ns1 [~]#

Code:
root@ns1 [~]# ps -auxf
Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.3/FAQ
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 1 0.0 0.0 1620 600 ? Ss 2006 0:22 init [3]
root 26544 0.0 0.0 1524 544 ? Ss 2006 0:18 syslogd -m 0
named 26570 0.0 0.0 46640 2976 ? Ssl 2006 1:14 /usr/sbin/named -u named
root 27659 0.0 0.0 1448 376 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/spool/authdaemon
root 27667 0.0 0.0 1796 616 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 27697 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 7289 0.0 0.1 9880 8584 ? S Jan21 0:06 | \_ /etc/authlib/authProg
root 27699 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 13800 0.0 0.0 9888 6156 ? S 2006 0:22 | \_ /etc/authlib/authProg
root 27700 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 5506 0.0 0.1 9880 8584 ? S Jan21 0:06 | \_ /etc/authlib/authProg
root 27701 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 7516 0.0 0.1 9880 8588 ? S Jan21 0:07 | \_ /etc/authlib/authProg
root 27702 0.0 0.0 1796 368 ? S 2006 0:00 \_ /usr/libexec/courier-authlib/authdaemond
root 31958 0.0 0.1 9880 8584 ? S Jan21 0:07 \_ /etc/authlib/authProg
root 30718 0.0 0.0 4008 1128 ? Ss 2006 0:02 /usr/sbin/sshd
root 29967 0.0 0.0 6900 2280 ? Ss 15:06 0:00 \_ sshd: root@pts/0
root 30115 0.0 0.0 2944 1280 ? Ss 15:06 0:00 \_ login -- root
root 30124 0.0 0.0 2280 1340 pts/0 Ss 15:06 0:00 \_ -bash
root 5923 0.0 0.0 2300 812 pts/0 R+ 15:20 0:00 \_ ps -auxf
root 31769 0.0 0.0 2072 788 ? Ss 2006 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid
root 31780 0.0 0.0 2144 1124 ? S 2006 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/my
mysql 31808 0.0 0.3 112316 24712 ? Sl 2006 9:08 \_ /usr/sbin/mysqld --basedir=/ --datadir=/var/li
root 31980 0.0 0.0 9752 8012 ? S 2006 1:05 chkservd
root 31995 0.0 0.0 1452 380 ? S 2006 0:01 /usr/sbin/courierlogger -pid=/var/run/imapd.pid -s
root 31996 0.0 0.0 1560 512 ? S 2006 0:02 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32018 0.0 0.0 1452 300 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/run/imapd-ssl.pi
root 32019 0.0 0.0 1560 492 ? S 2006 0:00 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32027 0.0 0.0 1452 380 ? S 2006 0:02 /usr/sbin/courierlogger -pid=/var/run/pop3d.pid -s
root 32029 0.0 0.0 1560 512 ? S 2006 0:02 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32036 0.0 0.0 1452 300 ? S 2006 0:00 /usr/sbin/courierlogger -pid=/var/run/pop3d-ssl.pi
root 32037 0.0 0.0 1560 492 ? S 2006 0:00 \_ /usr/lib/courier-imap/libexec/couriertcpd -add
root 32263 0.0 0.0 2472 928 ? Ss 2006 0:05 crond
root 32288 0.0 0.0 3024 1160 ? S 15:20 0:00 \_ crond
root 32370 0.0 0.0 2096 1036 ? Ss 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -q
root 32463 0.1 0.0 2100 1068 ? S 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -s
root 5917 0.0 0.0 2100 468 ? R 15:20 0:00 \_ /bin/sh /usr/local/sbin/bfd -s
root 5918 0.0 0.0 2096 976 ? S 15:20 0:00 \_ /bin/sh /usr/local/bfd/tlog /v
root 5922 0.0 0.0 2096 564 ? R 15:20 0:00 | \_ /bin/sh /usr/local/bfd/tlo
root 5919 0.0 0.0 1572 472 ? S 15:20 0:00 \_ grep sshd
root 5920 0.0 0.0 1572 484 ? S 15:20 0:00 \_ grep -viw error: Bind
root 5921 0.0 0.0 1516 468 ? S 15:20 0:00 \_ sed s/::ffff://
root 5924 0.0 0.0 1572 420 ? R 15:20 0:00 \_ grep -vi invalid
root 1434 0.0 0.0 4044 804 ? Ss 2006 0:00 /usr/sbin/saslauthd -m /var/run/saslauthd -a shado
root 1444 0.0 0.0 4044 464 ? S 2006 0:00 \_ /usr/sbin/saslauthd -m /var/run/saslauthd -a s
root 1508 0.0 0.0 1480 392 ? Ss 2006 0:00 /usr/sbin/portsentry -tcp
root 32126 0.0 0.0 3828 1324 ? Ss 2006 0:00 pure-ftpd (SERVER)
root 32130 0.0 0.0 3568 928 ? S 2006 0:00 /usr/sbin/pure-authd -s /var/run/ftpd.sock -r /usr
root 3137 0.0 0.0 7008 5256 ? S 2006 0:35 cpbandwd
root 3279 0.0 0.1 10812 8312 ? SN 2006 7:40 cpanellogd - sleeping for logs
mailnull 3299 0.0 0.0 7712 5264 ? S 2006 0:34 eximstats
mailnull 32022 0.0 0.0 7348 1984 ? Ss Jan02 0:00 /usr/sbin/exim -bd -oX 26
mailnull 32030 0.0 0.0 7348 1996 ? Ss Jan02 0:20 /usr/sbin/exim -bd -q180m
mailnull 32046 0.0 0.0 7348 1964 ? Ss Jan02 0:00 /usr/sbin/exim -tls-on-connect -bd -oX 465
root 32128 0.0 0.0 3044 1176 ? S Jan02 0:47 antirelayd
root 17635 0.0 0.2 25752 23600 ? Ss Jan02 0:32 /usr/bin/spamd -d --allowed-ips=127.0.0.1 --pidfil
root 22098 0.0 0.3 29440 27060 ? S 04:20 0:02 \_ spamd child
root 9762 0.1 0.3 30216 28136 ? S 11:16 0:19 \_ spamd child
postgres 1351 0.0 0.0 16732 2148 ? S Jan21 0:00 /usr/bin/postmaster -p 5432 -D /var/lib/pgsql/data
postgres 1354 0.0 0.0 7532 880 ? S Jan21 0:00 \_ postgres: stats buffer process
postgres 1355 0.0 0.0 6540 1024 ? S Jan21 0:00 | \_ postgres: stats collector process
postgres 29997 0.0 0.1 17544 11528 ? S 09:56 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 30561 0.0 0.1 18104 11852 ? S 09:56 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 31864 0.0 0.1 17592 11532 ? S 09:57 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32183 0.0 0.1 17496 11288 ? S 09:57 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32285 0.0 0.1 17580 11536 ? S 09:57 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 32299 0.0 0.1 18016 11708 ? S 09:57 0:03 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 3076 0.0 0.1 18080 11732 ? S 09:58 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 5427 0.0 0.1 17488 11280 ? S 09:59 0:02 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 26225 0.0 0.1 17544 11280 ? S 10:12 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
postgres 27895 0.0 0.1 17544 11292 ? S 10:20 0:01 \_ postgres: wifidog wifidog 127.0.0.1 idle
root 28058 0.0 0.1 17508 9088 ? S Jan30 0:02 cpsrvd - waiting for connections
root 29793 0.0 0.1 19096 9928 ? Ss 09:56 0:00 /usr/local/apache/bin/httpd -DSSL
nobody 29829 0.0 0.1 19408 9556 ? S 09:56 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29830 0.0 0.1 19444 9560 ? S 09:56 0:02 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29831 0.0 0.1 19448 9820 ? S 09:56 0:04 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29832 0.0 0.1 20576 9708 ? S 09:56 0:04 \_ /usr/local/apache/bin/httpd -DSSL
nobody 29833 0.0 0.1 20572 9936 ? S 09:56 0:05 \_ /usr/local/apache/bin/httpd -DSSL
nobody 30225 0.0 0.1 19332 9472 ? S 09:56 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 31771 0.0 0.1 19452 9532 ? S 09:57 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 31872 0.0 0.1 20584 9724 ? S 09:57 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 22289 0.0 0.1 19456 9588 ? S 10:10 0:03 \_ /usr/local/apache/bin/httpd -DSSL
nobody 22324 0.0 0.1 19328 9464 ? S 10:10 0:03 \_ /usr/local/apache/bin/httpd -DSSL
root@ns1 [~]#

View 3 Replies View Related

Newsletter Hosting

Sep 13, 2008

I've made some newsletter scripts for a bunch of mailing lists I distribute.

Should I be able to use a standard shared host / vps for this ? (About 80k subscribers at the moment)

View 8 Replies View Related

Sending Newsletter From PHP

Mar 29, 2007

We have a site with about 50,000 members.

Now we want to send newsletters to each of our site members.

If we use the normal "mail" command in PHP, it will create a heavy load for the server so that after sending the email, because of the heavy traffic which gets created on the server, the email will either not be send or it can take up to one week till it gets send out.

Is there any better and easier procedure or method for sending these types of emails?

View 1 Replies View Related

Where Can I Host An Opt-In Newsletter

Jul 6, 2007

I have a newsletter site with more than 200,000 opt-in subscribers. Here are my concerns:

I don't want to host with a black-listed server which will prevent many of my mails from reaching the subscribers.

I don't want my database stolen by a disreputable host.

I don't want to pay very much.

View 6 Replies View Related

Bulk Email For Newsletter

May 22, 2009

How can i do bulk email for my newsletter as i have a list of 1000 subscribers ... my ISP do not allow as it is consider spamming.

View 8 Replies View Related

120,000 Newsletter Subscribers - What Script To Use

Jan 20, 2009

We're currently trying to create a HTML newsletter (weekly) for our vBulletin members.

We have roughly 120,000 members subscribed to the newsletter we want to send out.

What is the best solution for this many subscribers? PHPList is efficient but many issues with HTML, and poMMo does not handle a list that large very well (even though they advertise it does).

We have a large dedicated server, so resources are not a problem.

View 4 Replies View Related

Best VPS For Hosting A Newsletter Script

Jul 18, 2008

I have buy the Interspire Email Marketer 5.0 [url].

So now i want to ressel multiple accounts to my clients, so that they can sen their own newsletters.

1- So wich hosting plan ( VPS or Dedicated Server) should be best for hosting a newsletter script to send over 1 milion emails for moth?

2- What should i look when choosing a hosting plan, like for example bandwith, number of ipīs, etc...

View 3 Replies View Related

Sending A Newsletter With 50,000 Subscribers

Dec 30, 2008

Got a few questions regarding sending out mass emails. First of all, I have a client that has a double opt-in newsletter that he sends out every other month. The newsletter has over 50,000k subscribers. I was wondering what precautions need to be taken when managing a newsletter of this size.

1) Does he need to send it from a different domain name? If his site is blah.com should he send the mass newsletter from blahnewsletter.com instead?

2) Should the newsletter be sent from a different IP address than the site is hosted on?

3) How do domains / ip addresses / email addresses end up on black lists, and if he does get blacklisted, what consequences would this have on his site, personal email address, server, etc.

Assuming you were given the task of managing a newsletter of this size, how would you set it up as to avoid unwanted consequences?

View 14 Replies View Related

Email / Newsletter Dedicated Server , Best Hardware Specs

Aug 26, 2008

I wanted to know wich hardware parts/specs are most important when running a php newsletter script like Interspire Email Marketer [url] or Omnistar Mailer (www.omnistarmailer.com/).

So im looking for a server that as to be able to have between 50 to 200 diferent emails clients, each one sending 20.000 to 80.000 emails / moth.

Based on my needs wich will be the adequate choice?

Server 1:
CPU: P4 2.8Ghz HT
RAM: 1GB
HDD: 2 x 80GB HDD SATA


Server 2:
CPU: 1 x Intel XEON DUAL-CORE 3075 [2.66GHz/4MB/1333MHz FSB]
RAM: 2GB
HDD: 2 x 250GB SATAII HDD

Server 3:
CPU: 2 x Dual Core Xeon 5110/4MB cache
RAM: 4GB
HDD: 2 x 73GB SAS - 10K RPM [RAID 10]

More Questions regarding hosting details:

a) In terms on CPU, do i need require P4, Xeon or 4Core Xeon?

b) In terms on RAM, will i need 1, 2, 4, or more Gb?

c) In terms on Hard Drive, i will be just fine using SATA or do i need faster, like SAS, 10k Raptor?

View 3 Replies View Related

Server Hardware Specs For Bulk Email / Newsletter Script

Aug 23, 2008

I want to install a email newsletter script like SendStudio or 1 2 All [url], to serve my current clients but i im not sure of wich server to choose.

Wich are the most important hardware specs (Processor / RAM / Harddrive) to andle a PHP / MySql Email Script sending 1 milion emails / moth.

Will a Pentium 4 / 1Gb RAM / SATA Hard Drive do the job?

Or do i need a High End Server with Xeon Processor / 4Gb Ram / SAS Hard Drives?

View 2 Replies View Related

Email Errors - 550 Callback Errors

Feb 13, 2007

I'm noticed I was getting bounced email errors from a company I was sending email through and I further investigated this by running a dnsreport on my domain.

Turns out that it fails at Acceptance of NULL <> sender, Acceptance of postmaster address, and Acceptance of abuse address. The domain that I ran a test on is using a new IP that I had recently added to my Direct Admin server. None of the other domains on my server are having issues like this.

Is is possible that I need to do something to enable these new IP addresses in exim? I mean, exim obviously responds to that IP address, but it seems to be having some issues with it.

View 5 Replies View Related

CSF Errors

Apr 1, 2009

I am doing the Security Check provided by Config Server Firewall.

It is giving me 3 errors, and I want to fix them, so here they are.

Check /dev/shm is mounted noexec,nosuid
/dev/shm is not mounted with the noexec,nosuid options (currently: none). You should modify the mountpoint in /etc/fstab for /dev/shm with those options and remount
On this one I actually went and added the noexec,no suid options. Here is what i've got configured and what it looks like. (it's most likely not correct so help correct it.)
[url]

Check /etc/named.conf for DNS recursion restrictions

You have a local DNS server running but do not have any recursion restrictions set in /etc/named.conf. If the named process is using this configuration file, then this is a security and performance risk and you should look at restricting recursive lookups to the local IP addresses only

Check dovecot weak SSL/TLS Ciphers (ssl_cipher_list)
Cipher list []. Due to weaknesses in the SSLv2 cipher you should disable SSLv2 in WHM > MailSever Configuration > SSL Cipher List > Remove +SSLv2 or Add -SSLv2
Alright so this one I followed the instructions, and i've got everything set correctly but it still shows up on the thing. I don't think the ssl_cipher_list is even available in WHM

View 3 Replies View Related

What Causes 500 Errors

May 30, 2008

I don't know much of anything about server settings or errors, so I need your help. Recently one of my servers have been getting a lot of 500 error messages, and I can't pinpoint the reason or replicate the error on my end. I did some Google searching and although I found out in general what a 500 error is, I still am not clear on what exactly causes them or how to reduce them. Could it be caused by intense amounts of traffic? Is the server just being overloaded?

Also, I see that my server is throwing a lot of 404 errors for a variety of URLs on my site, however when I visit the URLs specified by the error log they work fine for me - seems like only sometimes for whatever reason the server can't find/access them and throws a 404. Again, I can't replicate it and have no clue how to fix it since the list of 404 URLs work fine when I type them in.

View 4 Replies View Related

VPS Ftp Errors

May 29, 2008

I have a VPS account with an hosting site. For the past 2 days i have done a lot of uploads. I have 25+ sites on this account. Today when i try to login into my sites via ftp, its showing ftp login failed for all sites.

The hosting company is still sleeping on my queries regarding this matter.

Interestingly logins for WHM & cpanel for all sites are working fine.

Any experienced members plz guide me on how to get the ftp working to upload files to my sites.

View 4 Replies View Related

Php Pdo Errors

Nov 25, 2008

I see this in the domain error logs...

[25-Nov-2008 16:49:03] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0
[25-Nov-2008 16:49:04] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0
[25-Nov-2008 16:49:05] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20060613/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0
[25-Nov-2008 16:49:10] PHP Warning: PHP Startup: Unable to load dynamic library ...
Using php 5.2.6 / mysql pdo module (compiled via whm > apache update) / mysql 5

View 4 Replies View Related

Dns Errors Very Often

Feb 27, 2007

there is "Cannot Resolve Dns" for my site for one or 2 regions .. Everytime i check my site my site with a Website Monitoring site , i get Cannot Resolve Dns for one or two regions .. can anyone please tell me what the problem can be ..

When i go to dnsreport.com , i get Fail in Missing (stealth) nameservers

Quote:

FAIL: You have one or more missing (stealth) nameservers. The following nameserver(s) are listed (at your nameservers) as nameservers for your domain, but are not listed at the parent nameservers (therefore, they may or may not get used, depending on whether your DNS servers return them in the authority section for other requests, per RFC2181 5.4.1). You need to make sure that these stealth nameservers are working; if they are not responding, you may have serious problems! The DNS Report will not query these servers, so you need to be very careful that they are working properly.

ns1.mysite.ws.
ns2.mysite.ws.
This is listed as an ERROR because there are some cases where nasty problems can occur (if the TTLs vary from the NS records at the root servers and the NS records point to your own domain, for example).

View 4 Replies View Related

S.M.A.R.T Errors On /dev/hda

May 29, 2007

S.M.A.R.T Errors on /dev/hda
From Command: /usr/sbin/smartctl -q errorsonly -H -l selftest -l error /dev/hda
ATA Error Count: 2
Error 2 occurred at disk power-on lifetime: 6001 hours (250 days + 1 hours) Error 1 occurred at disk power-on lifetime: 5973 hours (248 days + 21 hours)
----END /dev/hda--

This is the third time I got this message. My server is often down that SIM pretty much restart httpd, named, etc. every 2 hours.

I had no other explanation for the problem.

May 29 02:02:16 server filelimits: Increasing file system limits succeeded

View 8 Replies View Related

Errors

Jun 29, 2007

Seen this in /var/log/messages

Jun 29 12:35:48 server kernel: Firewall: *TCP_OUT Blocked* IN= OUT=eth0 SRC=(my server ip) DST=(another server IP of mine) LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=3858 DF PROTO=TCP SPT=33891 DPT=2534 WINDOW=5840 RES=0x00 SYN URGP=0
Jun 29 12:35:49 server kernel: Firewall: *TCP_OUT Blocked* IN= OUT=eth0 SRC=(my server ip) DST=(another server IP of mine) LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=17089 DF PROTO=TCP SPT=33897 DPT=3306 WINDOW=5840 RES=0x00 SYN URGP=0
Jun 29 12:35:52 server kernel: Firewall: *TCP_OUT Blocked* IN= OUT=eth0 SRC=(my server ip) DST=(another server IP of mine) LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=17091 DF PROTO=TCP SPT=33897 DPT=3306 WINDOW=5840 RES=0x00 SYN URGP=0
Jun 29 12:35:53 server kernel: Firewall: *TCP_OUT Blocked* IN= OUT=eth0 SRC=(my server ip) DST=(another server IP of mine) LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=39040 DF PROTO=TCP SPT=33899 DPT=2534 WINDOW=5840 RES=0x00 SYN URGP=0
Jun 29 12:35:56 server kernel: Firewall: *TCP_OUT Blocked* IN= OUT=eth0 SRC=(my server ip) DST=(another server IP of mine) LEN=44 TOS=0x00 PREC=0x00 TTL=64 ID=39042 DF PROTO=TCP SPT=33899 DPT=2534 WINDOW=5840 RES=0x00 SYN URGP=0

Here's the strange thing. The part that says "another server IP of mine" are two different OTHER servers of mine, BUT do not have cpanel nor part of the cluster. What could it be?

View 0 Replies View Related

ATA Errors

Jan 30, 2007

I have this when I rebooted my Centos server

Jan 31 04:39:22 servername kernel: ATA: abnormal status 0x7F on port 0xE807
Jan 31 04:39:22 servername kernel: ATA: abnormal status 0x7F on port 0xE007

What does this mean? I am using autoraid Accusys.

View 2 Replies View Related

Xml/rss Errors

Nov 10, 2007

I had to reinstall xml:rss perl module via whm. Client is getting this error still

Can't locate XML/RSS.pm in @INC (@INC contains: /home/client/dir/mgmt/perl /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl .) at /home/client/dir/mgmt/commandline/erealms.pl line 36.
BEGIN failed--compilation aborted at /home/client/dir/mgmt/commandline/erealms.pl line 36.

Using cpanel 11 stable, centos 4.5

perl -v
This is perl, v5.8.8 built for i686-linux

View 3 Replies View Related

403 Forbidden Errors

Jul 1, 2008

I had made a page on my site earlier and when i went to it it gave me a 403 error so i tried fixing the .htacess then the site got messed up so i reset the .htacess to tis original settigns and now when i redirect to anything but the home directory it gives me a 403 error can anyone help?

View 3 Replies View Related

Read Only Errors

May 21, 2009

root@server [/backup/cpbackup/daily]# chmod 1777 /tmp
chmod: changing permissions of `/tmp': Read-only file system

root@server [/backup/cpbackup/daily]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 271G 135G 123G 53% /
/dev/sda1 99M 58M 36M 62% /boot
none 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 135G 80G 49G 63% /backup
/usr/tmpDSK 4.9G 64M 4.5G 2% /tmp
/tmp 4.9G 64M 4.5G 2% /var/tmp ....

View 2 Replies View Related

Apache Log Errors

Oct 30, 2009

i have the blog [url]

Whenever am trying to post anything there server load increse upto 90 and Post takes so much time to publish.

and at that time sometime am getting this error

Error establishing the database connection

Here is the screenshot of the Cpanel stats:

[url]

and am getting these error in my apache error logs

[Wed Oct 28 19:46:19 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/webadmin
[Wed Oct 28 19:46:19 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/myadmin
[Wed Oct 28 19:46:18 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/mysql
[Wed Oct 28 19:46:18 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/mysqlmanager
[Wed Oct 28 19:46:17 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/sqlmanager
[Wed Oct 28 19:46:17 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/admin
[Wed Oct 28 19:46:16 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/PMA
[Wed Oct 28 19:46:16 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/web
[Wed Oct 28 19:46:16 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/db
[Wed Oct 28 19:46:15 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/phpMyAdmin
[Wed Oct 28 19:46:15 2009] [error] [client 222.103.225.163] File does not exist: /usr/local/apache/htdocs/phpmyadmin

View 14 Replies View Related

BIND9 Errors

Jan 11, 2009

Below are my zone files and i receive the errors as specified.
[url]

Code:

BIND data file for mysite.org
;
$TTL 604800
@ IN SOA [url] (
2007011501 ; Serial
7200 ; Refresh
120 ; Retry
2419200 ; Expire
604800) ; Default TTL
;
@ IN NS [url]
@ IN NS [url]
[url] IN MX 10 [url]
[url] IN A 200.19.227.135
www IN CNAME [url]
mail IN A 200.19.227.135
ftp IN CNAME [url]
[url] IN TXT "v=spf1 ip4:200.19.227.135 a mx ~all"
mail IN TXT "v=spf1 a -all"
mysite:/etc/bind/zones/master#

Code:

;
;dns_rdata_fromtext: [url]:10: near eol: unexpected end of input
zone [url]: loading master file [url]: unexpected end of input
200.19.227.rev


Code:

mysite:/etc/bind/zones/master# more 200.19.227.rev
$TTL 1d ;
$ORIGIN 227.19.200.IN-ADDR.ARPA.
@ IN SOA [url] (
2007011501
7200
120
2419200
604800
)
IN NS [url]
IN NS [url]
1 IN PTR [url]
2 IN PTR [url]
mysite:/etc/bind/zones/master#

Code:
mysite:/etc/bind/zones/master# named-checkzone mysite.org 200.19.227.rev
200.19.227.rev:3: ignoring out-of-zone data (227.19.200.IN-ADDR.ARPA)
dns_rdata_fromtext: 200.19.227.rev:8: near eol: unexpected end of input
200.19.227.rev:12: ignoring out-of-zone data (1.227.19.200.IN-ADDR.ARPA)
200.19.227.rev:13: ignoring out-of-zone data (2.227.19.200.IN-ADDR.ARPA)
[url]/IN: loading master file 200.19.227.rev: unexpected end of input

How to correct these errors?

View 7 Replies View Related

Http / Php 500 Errors

Jun 15, 2009

On a cpanel / centos box:

We are facing with a strange issue about URLs. At any web site in our reseller account in php pages when we add http:// or http%3A%2F%2F to the URL as a query string server returns Internal Server Error 500.

For example when I try to access such page /index.php?q=http%3A%2F%2F[url] or /index.php?q=[url]I get this error. Is there any misconfiguration about PHP or Apache at server or what can we do to solve this problem?

Server uses PHP 5.2.9 / apache 2.2

View 12 Replies View Related

Exim 4 Errors

Jun 22, 2009

Is there a way I can get more error messages with exim? I'm trying to log in using plaintext smtp authentication and all I get is this:

2009-06-21 06:51:23 Start queue run: pid=8021
2009-06-21 06:51:23 End queue run: pid=8021
2009-06-21 07:07:41 no host name found for IP address 220.80.173.17
2009-06-21 07:07:42 no host name found for IP address 220.80.173.17
2009-06-21 07:21:23 Start queue run: pid=8029
2009-06-21 07:21:23 End queue run: pid=8029
2009-06-21 07:41:18 no host name found for IP address 220.80.173.17
2009-06-21 07:51:23 Start queue run: pid=8074
2009-06-21 07:51:23 End queue run: pid=8074
2009-06-21 08:20:47 no host name found for IP address 220.80.173.17
2009-06-21 08:21:23 no host name found for IP address 220.80.173.17

View 5 Replies View Related

Chkrootkit Log Has Errors

Jan 7, 2009

I have performed chkrootkit and got the following results. It suggests that there are a lot of problems. how would i get rid of these?

Checking `lsof'... not infected
Checking `mail'... not infected
Checking `mingetty'... not infected
Checking `netstat'... not infected
Checking `named'... not infected
Checking `passwd'... not infected
Checking `pidof'... not infected
Checking `pop2'... not found
Checking `pop3'... not found
Checking `ps'... not infected
Checking `pstree'... not infected
Checking `rpcinfo'... not infected
Checking `rlogind'... not found
Checking `rshd'... not found
Checking `slogin'... not infected
Checking `sendmail'... not infected
Checking `sshd'... not infected
Checking `syslogd'... not infected
Checking `tar'... not infected
Checking `tcpd'... not infected
Checking `tcpdump'... not infected
Checking `top'... not infected
Checking `telnetd'... not infected
Checking `timed'... not found
Checking `traceroute'... not infected
Checking `vdir'... not infected
Checking `w'... not infected
Checking `write'... not infected
Checking `aliens'... no suspect files
Searching for sniffer's logs, it may take a while... nothing found
Searching for HiDrootkit's default dir... nothing found
Searching for t0rn's default files and dirs... nothing found
Searching for t0rn's v8 defaults... nothing found
Searching for Lion Worm default files and dirs... nothing found
Searching for RSHA's default files and dir... nothing found
Searching for RH-Sharpe's default files... nothing found
Searching for Ambient's rootkit (ark) default files and dirs... nothing found
Searching for suspicious files and dirs, it may take a while...

View 14 Replies View Related

EXIM Errors

Apr 19, 2008

568 Temporarily rejected RCPT: lowest numbered MX record points to local host
89 Temporarily rejected RCPT: Could not complete sender verify
12 Temporarily rejected RCPT: host lookup did not complete
9 Temporarily rejected RCPT: remote host address is the local host

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved