I have a site that has become very popular and I feel that I will soon outgrow my hosting plan. The site uses sub-domains in a fashion similar to About.com. In other words, I have different sites under the umbrella of the main domain. How does a site like About handle this issue? Forgive me if this is an uneducated question, but, since I can't host the sub-domains under different accounts and relieve some of the bandwidth burden how do I handle the bandwidth issue? It's not like I can have one account dedicated to one sub-domain and another to the other sub-domain or can I? Also, can anyone recommend a good hosting plan for popular sites? I have 60gb of transfer right now, but I want to explore other options while there is still time.
i have an VPS account at SolarVPS. I have had some bad days lately. When i go to Virtuozzo on my Plesk cp. i see this
day - in - out 12 0.00 0.01 13 0.07 0.48 14 0.06 99.61
why is it like this? i don't used like 20GB last month (for all of my sites). but now it goes up to 100GB???? Why is this happening? how can i stop it?
Where does the log file for the web traffic usage shown in plesk (in plesk tools and settings->statistics) gets saved in the server(windows server 2008 R2)?
Does it related to the folder C:inetpubvhostsincometaxsoft.comstatisticslogsW3SVC7.
I am just in the process of setting up a new rack for some lower end clients.
At present we have both a local (National) and international traffic split. We need to offer our clients a 100/100 port speed on the national route/bgp/ip range but only a set amount on the international range. The port speed/throughput for international traffic would need to be as low as 128k/128k.
I would also like to have the flexibility to impose data limits on the international link as apposed to bandwidth shaping.
I have a spare Cisco 3750G-48TS I was hoping to utilize for the main switch on this rack (SFP Ports for multiple uplinks, National/International)
Hardware/Server wise what will be the easiest way to achieve this?
Does anyone have a tutorial or instructions to show how to set up munin to monitor bandwidth/traffic utilization?
I have a VPS from a provider that has no monitoring tools, and I need something to monitor.
(The VPS uses the HyperVM software.)
I am using the CentOS version 4.x right now, and munin is already set up and configured with a basic install.
Anyone know how to add traffic/bandwidth monitoring? (Ideally, it would monitor all active ports.. but I only really need it to monitor port 1194 for openVPN software.)
We are considering a new dedicated server host for a set of 25 domains, about 5 of which are very high traffic (80 million clicks a day each).
I am told that the biggest speed boost and performance comes from memory and fast hard disk. So I'm looking for at least a 16GB RAM and SCSI 10k 300GB hard disks.
I am also told that PHP etc is okay, but MySQL is the one that hogs resources after a while. So for the database server I need a high end server.
I like WHM/Cpanel so that should be alright.
A lot of email alerts may be sent through our system (about 500,000 a day on a good day as there's user subscription to updates functionality) so we may need a separate mail server?
My question: is the following config of 4 x quadcore Dunnington Intels be good enough for the above site? Can I run a database on this config for my kind of traffic or do I need a separate server too?
Should excess bandwidth charges apply for traffic that occurs between 2 nodes on a lan?
We have 2 self service dedicated servers. One of them runs our production environment and the other is used for development and backups. We have a cron job which copies backup data from the production server to the development box. A few months ago a bug in our backup script resulted a $700 excess bandwidth charge from the hosting provider.
An analysis of the network stats showed this to be $350 for outbound traffic from the production server and $350 for inbound traffic to the development box. Internet traffic for the period in question was negligible. I disputed the charge but was unable to obtain a refund. I'm trying to decide whether to switch providers as a result.
Based on the information listed above what do you think most hosting providers would have done:
1. Exactly the same. The terms of service make the customer liable for all excess bandwidth. 2. Offered a $350 refund to avoid billing twice for the same traffic. 3. Refunded the full amount because the excess traffic did not touch the public wan.
I migrated from one server running Plesk 10.4.4 Update #59 to a new server running Plesk 11 which I then updated to 12.0.18 Update #32. Since moving to Plesk 12 the "Notify when disk space/traffic usage reaches" emails have been being sent to our customers set up on the server whereas previously they were sent to the server admin email address.
In your professional opinion, does a simple shared account with 20+ gigs of bandwidth have enough to handle a website that, for a week out of a month, might hit about 5 or so thousand visits (to a single web page with mysql connection) per hour?
The traffic wouldn't last at that rate for more than a few days. but I want to make sure even a basic good web host with a shared account can handle this. Or is a must that I hit a dedicated server?
Linux, bsaic dual intel set-up like any other seems to be what I will have. Not sure about ram, but I am on a reseller account and the only one that will have real traffic.
Do you get a warning mail before you are about to cross your bundled data transfer limit?
I read in some post that it is user's responsibility to monitor bandwidth usage... But i think client has the right to know before he is about to consume his bandwidth limit...
probably alerts like.. you have consumed 80%/90%/95%/98%/99% of ur bandwidth limit.. Isn't it fair to expect this?
I have a small VPS that is running only openVPN. (No http/pop/ftp/imap/smtp...) Only one port is open for the openVPN software.
I've also disabled (not running) any other networking software, so there is no apache or anything "normal" like that.
It's a plain-jane CentOS 5.3 install, used only for openVPN.
The problem is that I have no idea how much bandwidth is being used.
Since the openVPN does not track bandwidth usage, I am now looking for some other way to do it...
I am thinking that perhaps munin or cacti or something like that would be a solution?
Basically, the only statistic I need to actually monitor is bandwidth, as I don't care about disk space, load, memory, or anything else..
(The server is using VirtualVM, but since that software is insecure... the VPS control panel is not currently online, so all the normal "tools" that the VPS came with are not working.)
We're not the Influxis host and also not affiliated with the host.
We wanted to get affiliated with this host but they don't have an affilate program.
We're currently hosting applications used from videowhisper com , videochat-software com (not the websites, just flash server applications) and also for multiple customers.
One of our applications generated today 18Gb of traffic on Influxis for about 100 connections!
The interesting part is that another copy of it used for our main demos generated 0.25Gb for 350 connections (as it usually does).
And the most important part is that the person running and testing that application from soberfolk org contacted us that video streaming was not working at all for it - and we had to restart VHost to get things back to normal. It was returning an error about bad stream name in flash debugger.
So video streaming was not working and it used hundreds of times more than it usually does.
Very weird.. we contacted them. We'll keep you updated about this.
We mention that the software we use has ghost detection routines that close connections occurring when users abruptly disconnect from FMS servers.
Did any of you get any huge bandwidth usage on FMS hosts due to ghosts or other errors?
Sitemeter is telling me the site gets an average of 38000 page views a day.
The web host is telling us we're using 51gb of bandwidth a day on average.
This is not a video site, or a download site. This is an article site, with jpg images. Our biggest page has about 2.4 meg of images on it. The average page is about 1.34 mb's, counting the navigation images which repeat on every page.
Sitemeter is telling me the site gets an average of 38000 page views a day.
The web host is telling us we're using 51gb of bandwidth a day.
This is not a video site, or a download site. This is an article site, with jpg images. Our biggest page has about 2.4 meg of images on it. The average page is about 1.34 mb's, counting the navigation images which repeat on every page.
I have come across many hosting providers recently who sell shoutcast servers with a set amount of bandwidth. e.g. their plan would be 100 slots, 128kbps with 100GB bandwidth/month.
I was wondering how they are able to monitor the bandwidth usage of a single shoutcast server and enforce a limit?
I have an increase in bandwidth for one of my site.
Usually, it average around 6 or 7 gigs per month. This month im almost at 10 gig. In awstats, it report that a spcific ip have used 3.49 GB alone and as 128668 pages view and 128668 hits. Last access was 18th of may.
I have done a IP whois, and it appears that this IP belongs to [url], which is an ISP.
Now, im thinking of all types of things. Is my account serving files for someone? hack?
I have a small linux box that I use as a router (CentOS 4.4 on OpenVZ).
I have quite a few clients connecting to it and using it as a gateway.
I would like to monitor their bandwidth usage if possible, I have iptables installed and am using iptables -L -v -n, which shows me the data transferred on specific ports that I am forwarding to them.
So, is there an bit of software out there that will monitor each IP for all UDP and TCP traffic, and wont be lost if I restart iptables.
I have looked at Cacti, but have never managed to get it to work...?
I am wondering Site like Megavideo How much Bandwidth they use Every Month ?
Let's say you want Open site like Megavideo OK , What is your plan for this site ?
What is the least amount to start with site like this ? What kind of servers you will choose ? What is your plan for Bandwidth ? What Provider you will choose ?
I'm about to move 31 machines into a 42U full cabinet
Previously I was on an uncapped bandwidth provider but we had a lot of problems with them so I decided to find a new provider who charges bandwidth by mbps
I do not have mrtg installed or managed switches, but I may start with 10mbps.
But I'm just curious, what takes a full cabinet with more than 30 machines does the total bandwidth takes you.
Perhaps any colo provider here don't mind to share their stats.
