Some Of Your MX Records Returned By Your Nameservers Are IP Addresses
May 2, 2008
someone setup there DNS for a .biz domain name, as they unable to change nameservers
I told them to setup an A Record to point to the server IP, that works fine
However I told them to put the same IP for the MX Record and, I checked it at introdns.com and it says:
ERROR: Some of your MX records returned by your nameservers are IP addresses. This is not ok per the RFCs and you should change them.
The problem records are:
xxx.xxx.xxx.xxx
This can cause problems!
View 1 Replies
ADVERTISEMENT
Aug 1, 2006
I have added a new ip for my nameserver3 and now it is pingable... But when I try to point a domain it says something like "check SOA record for your nameserver3" etc...
How can I add SOA records for this new nameserver via whm or?
View 2 Replies
View Related
Jul 27, 2009
I've got a Domain with Name.com. I have just introduced a new service into my website which is the google @ Doamin.com.
When ever i go to change my MX Records, The name control panel tells me that before i can do that i need to change my Nameservrs to;
NS1.Name.com
NS2.Name.com
NS3.Name.com
NS4.Name.com
But when ever i do that, it ofcorse makes the domain unreachable.
So how can i get it so that I have My custom nameservers
NS1.Fagex.net
NS2.Fagex.net
With these MX Records;
Record Type
Record Host
Record Answer
TTL
Priority (MX only)
MX leave blank ASPMX.L.GOOGLE.COM. leave blank10
MX leave blank ALT1.ASPMX.L.GOOGLE.COM. leave blank 20
MX leave blank ALT2.ASPMX.L.GOOGLE.COM leave blank20
MX leave blank ASPMX2.GOOGLEMAIL.COM. leave blank 30
MX leave blank ASPMX3.GOOGLEMAIL.COM. leave blank 30
View 9 Replies
View Related
Sep 7, 2007
Recently we add a new server,so we register ns3 and ns4 to 2 new ips,of the new server.
Then,in the old server,we set ns3 and ns4 as A records to the new ips.
Doing a dns reverse to ns3 and ns4 they report the correct ips. BUT When make a dns reverse for the nameservers ips,it makes a loop.....
View 9 Replies
View Related
Jul 31, 2008
I am currently building a site for a customer who currently has a website hosted somewhere on a shared ip address. I need to add them to my server so i can build their MYSQL database and start using it.
is their a way i can still change their nameservers to my server but still have their domain forward to the old site while im working on the new one?
So I guess my question is how can i forward a domain to an site with a shared ip address?
View 2 Replies
View Related
Feb 10, 2008
I need to change the IPs that are assigned to my name servers. In WHM they are set fine, ns1.xxx.com and ns2.xxx.com both have their own ip's.
However the nameservers were first setup with 123-reg as they hold the domain im using.
when i ping each nameserver they both endup pointing to 1 ip address (the ip of ns2.xxx.com) so i need to change this.
how i would go about getting this changed?
View 3 Replies
View Related
Apr 24, 2013
I need to accomplish the following:
1. User hits my new 2.4 reverse proxy at [URL] ....
2. I proxy the request through to my "real" app server at [URL] ....
3. I also use a re-write rule to add a querystring to the URL: ?Parameter=Foo
4. So, client's request arrives at the my app server as [URL] .....
5. When my app server responds, it is including the Parameter=Foo key/value combination. I don't want this.
6. I want my reverse proxy (somebox.com) to strip "Parameter=Foo" from the string which gets returned to the client.
I have steps 1 & 2 working nicely, but it looks like I can't handle the last bit with with mod_rewrite. I found mod_filter and mod_substitute, but it appears that this stuff is used for re-writing strings IN the document. Can these libs be used to maybe modify (I'm guessing here) the headers so that the "?Parameter=Foo" string can't be seen on the client if they're running something like fiddler?
View 3 Replies
View Related
Jan 31, 2014
I'm running Apache 2.4.7 on a RHEL 6.4 server. I'm using the Oracle WebLogic Proxy Plugin ver 12.c to connect to a back end server.What's happening is that Apache answers URL.. and proxies the request via the WebLogic Proxy Plugin to internal.blah.com. Unfortunately, the downstream system encounters a problem and issues an http 302 redirect to internal.blah.com/whathappened. I would like to have Apache intercept this http 302 and redirect the client to URL...
View 1 Replies
View Related
Apr 1, 2015
So right now I'm getting lots of emails going out to a bunch of random email address with the message:
"Undelivered Mail Returned to Sender"
I have all accounts set to "Reject" and not send a reply to messages to undeliverables. The other thing is that these emails are being sent from "MAILER-DAEMON@rack.stnhost.com (Mail Delivery System)" Which is my server. So how do I stop this and why is it doing it.
View 2 Replies
View Related
Mar 7, 2015
I can't send emails and when I try I receive this mails with this error. This is my configuration of postfix:
Code:
readme_directory = /usr/share/doc/postfix-2.8.17/README_FILES
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
transport_maps = , hash:/var/spool/postfix/plesk/transport
[Code] ....
I try to restore permissions but it does not work.
View 19 Replies
View Related
Mar 15, 2006
I've been working on this for some time now, but I'm not sure on how the settings were transfered over to this server. I wish I was there when it was done.
Anyways, we got a new server and we transfered all the accounts to the new one. The old one is gone. When people send emails to their email accounts on the server, this is returned:
This is an automatically generated Delivery Status Notification
Delivery to the following recipient failed permanently:
admin@crewxp.com
Technical details of permanent failure:
PERM_FAILURE: SMTP Error (state 9): 550 relay not permitted ....
View 6 Replies
View Related
Dec 20, 2014
I'm problem with crone sender email. I changed the version of the panel from 11.5 to 12. After start the corne and sehedule task in one of users I recived email. The crone task starts from email.
For this example, I replaced the user name in Plesk Panel, which is assigned cron jobs on “support”.
This is the mail system at host servername.domainname.
I'm sorry to have to inform you that message could not be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can delete your own text from the attached returned message.
The mail system
<-f@domainname> (expanded from <-f>): bad address syntax
<support@domainname>: Host or domain name not found. Name service
error for name=support.domainnametype=AAAA: Host not found
[Code] ....
View 2 Replies
View Related
May 26, 2008
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
View 7 Replies
View Related
Aug 25, 2014
We're not able to install the ePages App.
We get this error:
Code:
Non-zero exit status returned by script. Output stream: 'Failed to install site: Not Found '. Error stream: 'Failed to install site: Not Found '.
panel.log
Code:
[2014-08-25 17:13:04] ERR [util_exec] proc_close() failed
[25-Aug-2014 17:13:04 Europe/Berlin] PleskUtilException: '/opt/psa/admin/bin/sappmng' '--run-application-script' '--script-file-name=configure.php' '--script-name=remove' '--script-language=php' '--user-name=xxxx' '--application-full-name=file:////opt/psa/var/apspackages/ePages-6.10-8b4212cd8-fdd0-5e46-5949/cache' failed with code 1.
[Code] ....
I configured the App in the application vault to the ip address of our plesk server.
View 2 Replies
View Related
Jul 13, 2009
I have a domain(ex. mydomain.com) hosted on a shared windows server, I also have a dedicated Linux server with a different company.
What I would like to do is have the mail be handled by the Dedicated Linux Server(cPanel/WHM), while the site is running on the shared windows server.
I understand I would need to change the MX Records for the domain on the Windows Server to point to the dedicated server's mail server IP Address (mail.SERVER IP ADDRESS.com ?), but do I also have to create an account on the linux server to handle the mail (example forwarders/auto responders).
If that is the case, how do I tell it to take care of all the mail coming for the domain mydomain.com?
View 4 Replies
View Related
Mar 5, 2008
SRV records on a WHM server, is it possible? If so, is there any documentation on this?
View 0 Replies
View Related
Oct 31, 2007
I have two hosting packages with 1and1: a shared hosting package and a new dedicated server. I am transferring my domain from the shared package to the dedicated server.
However, I have not yet initiated DNS propagation. Files, databases, FTP accounts, subdomains, cron jobs, etc. have all been added to the new server. The problem is, I'm not ready to setup the email accounts on the dedicated server. I have about 20 email accounts on my domain and I will have to show each user how to setup the new account with their email client of choice and transfer any important email to the new account using IMAP. Copying the mailboxes with SSH is not an option since I don't have root access to the shared server. Email is not stored on that server anyway (I think 1and1 uses perfora.net servers for load balancing email and databases). Plus, I'd rather handle all of the email stuff after propagation is completely finished.
So here's my question... How can I make mail sent to example.com go to 1and1's email server? I looked up my current MX records and they are mx00.1and1.com and mx01.1and1.com. I tried adding the following MX records to my server's DNS table (in Plesk):
Mail exchanger: mx00.1and1.com
Priority: 0
Mail exchanger: mx01.1and1.com
Priority: 5
(This one was already there)
Mail exchanger: mail.example.com (my domain)
Priority: 10
But when I send an email using SMTP on the new server, it is sent to a test inbox on the new server instead of the shared server. Is the MTA not looking at the DNS records on the same server or are they cached somewhere and I have to wait a while (it's already been several hours)?
Second question... I still want 1and1 to think that I'm hosting my domain on the shared hosting package so that my email accounts won't be deleted. For this reason, I can't transfer my domain name in the 1and1 control panel until the new email accounts are completely setup. Can I just point my registrar (Go Daddy) to ns.example.com (my domain) instead of ns.1and1.com? DNS service is running. I'm just afraid this may route any traffic within the 1and1 network to the shared server instead of the new one.
I probably haven't been very clear about everything but I'm still very new to server management.
View 1 Replies
View Related
Jun 26, 2009
I'm setting up my dns records for a backup mailserver and setting up another ns record in case of server / datacentre problems.
My question is, do I need to specify the ip address of the external hostname and the external namserver in the local dns record?
e.g mail.mydomaim.com in A **.***.**.**
then add mail.outside-domain.com in A **.***.**.**.
I dont think its necessary but want to double check.
View 2 Replies
View Related
Nov 7, 2009
DigBuddy is an email deliverability and MX monitoring service. Customers sign up and input all of the email addresses at their domain and our monitoring system will check to make sure that these email addresses are able to receive email by logging in and attempting to send an email without actually sending one. It also checks the DNS, SPF records and a bunch of other stuff so our clients can be assured that they are able to send and receive email to a variety of networks without issue.
We need to set up monitoring servers on a number of networks across a number of countries that can be used to send and receive email. Basically all we need is a VPS with 512mb of ram and 19 IP's. It also must have an unblocked SMTP port 25 and the IP's must have a neutral or better senderbase score. We also need to make sure that the IP's have proper forward and reverse DNS entries.
View 4 Replies
View Related
May 6, 2008
Have been reading around the net trying to figure out how to do this and arrived here. Thought I would see if someone could advise me on how to change some MX records.
At the moment there are 4 records :
A @ IP Address: xxx.xx.xxx.xx
A www IP Address: xxx.xx.xxx.xx
A mail IP Address: xxx.xxx.xxx.xxx
MX @ Host Name: xxx.domain.com
Priority : 10
I need to add two MX records. Do I delete the existing record?
and do I set them as MX @ Host Name or do I need to do something else?
I did manage to set some MX records a long time ago but have completely forgotten how to do it now
View 1 Replies
View Related
Jul 30, 2008
I have a domain registered with Dotster and my NameServers point to Verio who is my webhost. My MX Records at Verio point to Appriver who handles my email. I'd like to get Verio totally out of the picture and just host my site at Dotster and still keep the email at Appriver. However, I'm not quite sure the order in which to change the various settings.
Do I just change the Name Servers at Doster to point to Dotster instead of Verio and then use Dotster's DNS to point the MX Records to Appriver? Would I then disable the MX Records at Verio? What about propagation of these changes...would I lose email traffic?
Do I need to change the TTL? I'm really not sure about the order of the steps.
View 2 Replies
View Related
Apr 5, 2008
I have been considering upgrading to a dedicated or vps server for some time. In my research I ran across a comment on another forum that didn't seem correct and was hoping someone could clarify.
This person upgraded to dedicated and stated he failed to verify his mx records accuracy and was the reason his emails where not being sent out properly.
My question is, does upgrading from shared to dedicated require you to make some kind of change to your mx records? If so, what change needs to be made? I would think upgrading to dedicated would have no effect on your mx records for your email.
View 1 Replies
View Related
Mar 31, 2008
on one server we have changed hostname.. and now we receive mail delivery failed as this:
You cannot setup a domain that is the same as the servers hostname
"
SMTP error from remote mail server after end of data:
host mail1.**.com [**.**.***.**]: 557 Your domain sun.***.net does not have a valid MX DNS record.
"
We have check under dnsstuff.com and for sun.***.net there aren't mx dns set
sun. is setting, under whm, into account www.***.net
we have try to add a new account for sun.***.net but system said
"You cannot setup a domain that is the same as the servers hostname"
So, How to set correctly MX DNS record for hostname?
View 5 Replies
View Related
Dec 11, 2008
I have two MX Records
mail1 IN A 1.2.3.4
mail2 IN A 1.2.3.5
domain.com. 14400 IN MX 10 mail1.domain.com. primary
domain.com. 14400 IN MX 20 mail2.domain.com. backup
Working perfect but the question is if the mail primary is down the mail backup take up right? ok, and so how i can get the email have mail backup when the primary is up the email backup sent the email to primary.
Also if the primary is down, what pop3 i need to have for recevice mail for globally?
View 2 Replies
View Related
Jan 10, 2008
My LxAdmin Server is not able to receive emails, due to faulty MX records, ( that is what i can think )
Here is snap shot of DNSSTUFF.com , where it shows error in mail settings -
This is the domains DNS settings-
__base__ A - xx.xx.xx.xx
cp A - xx.xx.xx.xx
mail A - xx.xx.xx.xx
ns1 A - xx.xx.xx.xx
ns2 A - xx.xx.xx.xx
pop A - xx.xx.xx.xx
www A - xx.xx.xx.xx
ftp CN - __base__
lists CN - mail
webmail CN - mail
mysite.com MX 10 mail
how can i make my email working?
View 8 Replies
View Related
Dec 7, 2008
We recently decided to move all our DNS to a service called DNS Made Easy and also our sever box. We setup what they call Vanity DNS with ns0.domain.com and ns1.domain.com so our clients did not have to change their nameservers.
Our records for all domains are now setup and looks like they are beginning to propagate. Here's where the question is:
IP - 1.1.1.1 is for domain1
IP - 1.1.1.2 is for domain2, domain3 and domain4
IP - 1.1.1.3 is for domain5
All domains have MX records pointing to a either Google or Mailtrust.
what is the best way to setup Reverse DNS and PTR's for this setup and what should we ask our ISP to do for Reverse DNS in this case.
View 6 Replies
View Related
Apr 16, 2007
I have a domain registered with namecheap, and I am using them for DNS. Does anyone know how to add an SPF Record for a domain w/ namecheap?
I have sent Namecheap a support email, but haven't heard anything. I figure someone on this board may have done this before.
View 2 Replies
View Related
Jul 23, 2007
I've dealt with a few hoster that make you change your nameservers of for hosting. I have a couple of clients coming up who want to keep their mail servers as they are - are there any good UK shared hosters (Linux, Apache, PHP, MySql) that will let me set up hosting via an A record only (i.e. no email hosting)?
View 2 Replies
View Related
Jun 15, 2007
I've just designed a site and the company have just told me they have their own mail server.
I've never touched mx records before as I've always had mail collected on the server which hosts the site so this is new territory for me.
What's got me a bit stumped is where are the mx records controlled - with the domain registrar, the hosting company or both? I've gone into the account and changed the DNS MX records with the hosting company (Cpanel). I've double checked I've done it right with the hosting company and they've said it seems fine... But it's not - I keep getting failed deliveries:
xxx@xxx.com
SMTP error from remote mail server after RCPT TO: <xxx@xxx.com>:
host company.mail.server.co.uk [88.88.88.88]:
550 5.7.1 Unable to relay for xxx@xxx.com
(email, server, and ip edited out)
The hosting company did say it might take some time to propagate, but I have a hunch it isn't going to work.
Now, I've got a couple of different registrars I use and one of them lets you edit mx records directly while the other one doesn't... Which leads me to think that you can control the mx records with both, but the domain has priority?
View 4 Replies
View Related
