when I click a link in my site, sometimes nothing happens, until the connection times out. What could be causing this problem and what could I do to solve it? Increase the max number of Apache processes, threads per child, or what?
View 4 Replies
I have a problem with slow Apache 2.4.4. It's only related with https which is in general 5 time slower than the same site via http. I see this difference on the monitoring software which is measuring response time to http and https every 5 seconds. In some cases i got even timeouts in the browser on https while in the same time site is opening over http - slowly but opens always.
Apache runs on Win2k8 Enterprise, Version 2.4.4 x64 - VC10. Server is connected with quite poor internet connection as it's located in Africa. Despite of connection quality http is working properly all the time.
I've very slow response (from 1-2 seconds to tens of seconds) from http://localhost using Apache 2.4.3/Win32 service on Windows 8/32bit (6.2 build 9200). It doesn't depend on the browser used. Responses from all other sites are much faster.
Because it seemed to me to be a DNS issue, I tried to uncomment "127.0.0.1 localhost" and/or "::1 localhost" line in the hosts file, put "http://127.0.0.1" or "http://[::1]" instead of "http://localhost" into the browser, flushing dns by ipconfig /flushdns, stopping DNS Client by "net stop dnscache", disabling IPV6, etc. but nothing worked.
It seems that hosts file is ignored and "localhost" is passed to external DNS. Ping localhost yields to "Reply from ::1: time<1ms" response, ping 127.0.0.1 yields to expected "Reply from 127.0.0.1: bytes=32 time<1ms TTL=128" response.
Finally, "unplugging the network cable" is the only solution I've found: then the connection to localhost is much faster.
How to get instant response when connected?
I am working with wamp on development phase. We have a Symfony 2 project and I am using Assetic to manage the assets. (no filter used for my test, so no compression or whatever).
I know I am in the development mode and that assetic is meant to work differently on prod environment but the loading of js, css and images is so slow (could be 30s for a dozen css, a dozen js -most of them are already minified- and 4 images, I am using firebug to check) that I wonder if there is a problem with Apache.
I have a website on a linux-server working fine with PHP/Apache. The page loads a lot of css/js/image-stuff (total 84 requests, 220k), it takes about 4 secs to load via internet.
Now I'm testing the same page locally on a Win7-64-system (Apache 2.2, PHP 5.4). The system is not very slow (8 GB RAM, SSD, i7-CPU), but loading the same page as above takes about 50 secs.
The Q is: What might be the problem?
- I turned off firewall and anti-virus.
- I used mod_status: 150 threads, max. 11 seems to be used during the loading of the page.
- I tried php5apache2_2.dll with TS-PHP 5.4 and mod_fcgid.so with NTS-PHP 5.4, but the loading-time kept almost the same.
Looking at the "network-tab" in FF or Chrome, I found that a lot of subqueries get a timing like this:
Blocking: 11.96 s
Sending: 0
Waiting: 1 ms
Receiving: 6ms
So the loss of time seem to be in the "blocking"-section. I first thought of something like "limited number of TCP-Connections", but as said above, on the same system the page is remotly loaded fast enough almost without these "blocking"-parts.
Apache seems to have a maximum client download speed of 5Mb/s. That too after I use these commands:
# Improve file transfer speeds on Windows Machines
EnableSendfile Off
EnableMMAP Off
Which without, the speeds are even slower!
I know for sure the server I am running Apache on can go to much higher speeds (2MB/s to even 12MB/s) because I tested it via FTP.
I have Configured Apache2.4.4 for forward Proxy and tested from my browser the response is very slow and even not coming complete Response for some requests.
I also Tested the same for Apache2.2 Forward Proxy it is very fast and good.
May I know what is the Problem in Apache 2.4
Is there any Issues in proxy modules (mod_proxy,mod_proxy_connect.so,mod_proxy_http.so) in Apache2.4
This is the same configuration i used for Apache2.2 and Apache2.4
##########################################################################
## Apache Forward proxy
##########################################################################
<IfModule !proxy_module>
LoadModule proxy_module modules/mod_proxy.so
</IfModule>
<IfModule !proxy_connect_module>
LoadModule proxy_connect_module modules/mod_proxy_connect.so
[Code] ....
I've got 25 domains on a Virtuozzo/Plesk8.6/CentOS5 VPS. Each domain has one up-to-date install of WordPress, most have very little traffic (average 200mb per month), maybe 2 domains get 5-7gb traffic per month.
I monitor port 80 connections and rarely see more than 10 at a time.
That should in my opinion be no problem at all for a VPS with 768mb guaranteed ram and 2.4ghz cpu. I've got 30gb hard drive spare too.
But.... about 8 or 10 times a day it grinds to a complete halt: server load at 500-1000%, sites timing out, plesk takes 3mins to load, often I can't even connect with SSH, and the plesk web server, apache
INSERT INTO module_watchdog_sys_stat (time, type, value, service_id) VALUES(FROM_UNIXTIME(1226404705), 'MAINMEM_USAGE', 17472, 11);
80 seconds sounds like a huge amount of time for a MySQL insert to me! Does anyone know if this is likely to be the cause of my trouble? Some problem with Plesk and the database? Or could it be something else?
My server is very slow, High CPU, High Apache load....
I got a new server and i had setup a script on it.
No server tweaks has been done.
I run a filehosting site so it gets very slow when traffic is high.
Here is some info:
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd
I dont know much about server managment...
how to fix this so server doesnt go slow?
At 15.00 PM (+1 hours here) my isp rebooted the hardware node. After the reboot there were some issues, they think it is possibly a DDoS Attack. They said the load on the host node was in the hunderds and my VPS was stopped because of the reboot and when I started it, HyperVM first told me it was not possible and after a few tries it started finally.
But the load was very high, and it still is. How can I check what the problem is that creates the high load?
Im getting very poor ftp speeds from my server, can someone test the speed and report it back, link below:-
[url]
I did nothing but my whole server got slower.
Especially the sshd and mc.
I solve the sshd problem cos I edited the conf file with UseDNS no so it faster right now but I couldnt do anything with mc.
I have to wait about 15 seconds to load it.
Any suggestion?
or any ideal why my server become slower?
System: Debian 4.0
kernel: grsec 2.6.19-1
Till today morning its okey.
Oh, yes, I run tiger and got the following message in log:
09:50> Beginning security report for atdn.us (GNU/Linux Linux 2.6.19.1-grsec).
# Performing check of passwd files...
# Checking entries from /etc/passwd.
--WARN-- [pass014w] Login (firebird) is disabled, but has a valid shell.
--WARN-- [pass016w] User oident has / as home directory
--WARN-- [pass015w] Login ID sshd does not have a valid shell
(/usr/sbin/nologin).
--WARN-- [pass015w] Login ID sync does not have a valid shell (/bin/sync).
# Performing check of PATH components...
--WARN-- [path009w] /etc/csh.login does not setenv an initial setting for
PATH.
# Only checking user 'root'
I modificated this to the correct one (I mean I try to solve this warnings) but when I noticed that my machine becmome slower, I recover everything.
I have an ASP.Net + SQL Server 2008 Express website I was hosting with DiscountASP.net. Their service seems pretty solid, and I didn't have any issues hosting with them. Customer support was quick and knowledgeable.
However, I had noticed for quite some time that the website seemed pretty slow. Please note that the website isn't live yet, so it was only me and a colleague who were accessing it. I was accessing the website from Dubai, UAE and he from Doha, Qatar. Therefore traffic/load definitely wasn't the problem.
We tried an instance of the website on a VPS (the DB was still running on DASP), and it was blazing fast! The difference in speed was quite significant and sustained. What could the reason for this be? Is it because we can't expect good speeds from shared hosting? Or should I report this issue to DASP?
I would be paying around 5x of what I'm paying right now ($100 instead of $20) if I switched to a VPS, but if there are definite advantages, I would be willing to do so. I don't expect large volumes of traffic on the website for quite a while.
I have a problem with my company's web hosting solution: occasionally we go through periods where we cannot seem to access our webpages very quickly. In different browsers (IE, Firefox) it takes literally minutes to load a single page. Most of the time the pages load very quickly from inside our office or outside.
Our self-hosting configuration is:
Windows XP Pro. w/ SP3
Apache 2.2.11 with PHP5.2.9-2
Norton Internet Security
Our internet connection is 10Mbps down / 900 kbps up cable behind a DLink router with port 80 forwarded over to the web server. Each page of our site is relatively small in size.
The same computer server as a mail server for about 10 email addresses.
When we encounter this problem, restarting the Apache service never seems to help, but restarting the computer does seem to help. XP was put on the computer with the latest updates about 3 weeks ago, so I am not concerned about spyware, particularly since this computer is only used as a server.
Does anyone have any troubleshooting steps to determine what the problem is? We don't have hundreds of visitors at a time in traffic as far as I am aware.
I own the website [url]and it's hosted at Host Excellence. Recently there have been some downtime periods, and most importantly, I have noticed that downloads are very slow. For instance, when I download a file such as [url]I get an approximative transfer rate of 100-150 KB/sec (whereas most other sites download at 500 KB/sec or more). First of all I'd like to know if you guys get similar results, and what do you recommend? I have contacted my host about it, they seem to deny the problem. Should I switch? What to? I need something reliable and fast.
View 14 Replies View RelatedAfter my bad experiences with the other provider, I decided to go with GeekStorage.com for my hosting needs. I found plenty of positive reviews for them but so far, it doesn't look good :-/
The support was fast enough, but not really helpfull.
My basic problems, so far, are:
1. The VPS is _really_ slow. Simple operations like listing (ls) the contents of directories with 4-5 files takes around 1~1.5seconds. Editing /etc/vim/vimrc with vim takes around 3 seconds (to open, I mean).
2. While trying to install phpmyadmin from the default ubuntu repository took me almost 10 minutes, from downloading to installing the packages. Something my old Dual P3 (yes, pentium 3) did in less than 2 minutes. Accessing the phpmyadmin page (with a web browser) took around 3 seconds, and no, I don't mean loading the database scheme and stuff, just the login screen. It just stood there for 3 seconds, then instant load. No, it wasn't a DNS problem. My browser was just hanging at "Waiting..."
3. Bandwidth is _really_ low. Tried downloading different files located all around the world and I never seen more than 300k/s, max. Sometimes it drops to a painfull 150k/s and just stays there.
4. Timeouts. First night they got my VPS up I had small downtime periods. I was trying to edit the DNS files and I had like 20 disconnects in 1 hour. The connection was working for 2 minutes, then *poof* dropped for another 2 minutes.
5. The virtualization. I can't install simple software as pureftpd. All I get is "Jan 4 20:38:21 vps pure-ftpd: (?@?) [ERROR] Unable to switch capabilities : Operation not permitted". Tried different workarounds (trying to avoid recompilation with --without-capabilities) but nothing worked.
As answers, all I got so far is:
- for the connection problem:
"Could you please provide the results of a traceroute when this problem is occurring? We will forward it to the DC and see if they can determine any network issues. Thank you, and apologies for the trouble."
Got the answer 1 hour after I asked them if there's something wrong, but it was too late... the problems were gone, for the moment.
- the slow response from the vps:
"2-3 seconds is understandable during peak hours, however we have not seen this issue come up on node3 since the server was rebooted recently. If the issues arise again
please let us know, we will check on the cause."
I *almost* understand about the peak hours, but it's not normal. I remember this was an issue with *shared* hosting. This was one of the reasons I got a VPS in the first place.
Basically they're telling me that during peak hours my customers will have to wait 3 seconds for my websites to load. You know what the average user does after waiting that many seconds for a page to load? Closes the browser or types another address.
I have the VPS512 plan (the $55 one + $3 safetyweb protection) + extra 50% bandwidth and disk space. My VPS is located on NODE3.
Anyone else experiencing the same issues (maybe on another node?) I'm still hoping for this issues to go away, maybe it's something temporary, but if this happens for the whole week, I'll definatelly ask for money back (they have a 60day return policy).
My cPanel/WHM VPS is running slugesh/slow and loading time is affected, for cPanel/WHM and HTTP mainly PHP files.
VPS Spec:
CPU: 1 GHz * 4 cores
RAM: 832MB - Spare Ram 300MB+
Space: 35GB - Left 27GB
Load: Various but normally below 1.00
Is it in the UK, I am in the UK ping and trace route looks fine
My site is very slow. But I can not find the reason.
Here is the top
Code:
top - 22:04:07 up 22:09, 1 user, load average: 0.44, 0.43, 0.34
Tasks: 402 total, 1 running, 401 sleeping, 0 stopped, 0 zombie
Cpu(s): 4.3%us, 0.7%sy, 0.0%ni, 94.8%id, 0.1%wa, 0.1%hi, 0.1%si, 0.0%st
Mem: 2074804k total, 2007836k used, 66968k free, 72720k buffers
Swap: 4192956k total, 96k used, 4192860k free, 641728k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
17133 apache 20 0 27752 9.9m 3392 S 4 0.5 0:02.25 httpd
6306 apache 20 0 27772 9.9m 3452 S 4 0.5 0:08.04 httpd
2261 mysql 20 0 251m 88m 4752 S 3 4.3 48:25.58 mysqld
17081 apache 20 0 27700 9.9m 3496 S 2 0.5 0:02.81 httpd
17105 apache 20 0 27112 9504 3428 S 2 0.5 0:02.62 httpd
11844 apache 20 0 27756 9.9m 3444 S 0 0.5 0:06.21 httpd
13676 apache 20 0 27700 9.9m 3440 S 0 0.5 0:04.74 httpd
13718 apache 20 0 27424 9856 3448 S 0 0.5 0:04.83 httpd
16690 apache 20 0 26628 8980 3408 S 0 0.4 0:01.88 httpd
When run
[root@nd10749 ~]# netstat -an |grep 80 |wc -l
2788
It was able to handle over 5000 connection without problem.
When checked the log, can not find anything suspicous.
Leaseweb very very slow?
just me?
2 dedis... and both with problems... anyone?
Recently, my server has been running real slow and I don't know why... I've not noticed any increase in traffic (In fact it goes slow with no traffic on it...), what are some things I can look at to try and diagnose the problem? I know next to nothing about *nix so please speak in great detail.
Anytime I restart Apache, it loads quick for a few seconds then gets slow again...
Here are the top few processes listed on the process manager: .....
I had configured webserver on one of my CentOS server. It worked fine for few months but after sometimes it started giving problem. I was not able to browse website. The I found that it was timing out so I increased timeout period from php and the website started working.
But still the website is taking 30-35 seconds to load. I checked the server but I couldn't find any solution. Please guide me to get this resolved.
I noticed today that SSH is taking longer to log into, I have tried by password and key but they just as slow as each other.
Once I am logged in, it is fine.
I have tried restarted SSHD via WHM but it makes no difference. Trace route looks ok and all other services seem fine as well.
Server load is around 0.00 and around 500mb ram spare.
I have got a dedicated server running Fedora Core 7.
My problem is that I am trying to run yum updates using the default repos and it failes to respond and check any mirrors?
I have tried to disable ipv6 and changed some tcp timeout settings along with the resolver.conf name servers and has appeared to fix the wget timeouts but yum is still slow.
this is my server and i host only one site as upload image but it is too slow and usully apache down
how i can optimize this server please
Processor Information
Processor #1 Vendor: GenuineIntel
Processor #1 Name: Intel(R) Pentium(R) 4 CPU 2.26GHz
Processor #1 speed: 2262.422 MHz
Processor #1 cache size: 512 KB
Memory Information
Memory: 1002104k/1015744k available (2150k kernel code, 12844k reserved, 716k data, 164k init, 98240k highmem)
System Information
Linux 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686 i686 i386 GNU/Linux
Physcial Disks
Current Memory Usage
total used free shared buffers cached
Mem: 1003164 976220 26944 0 102932 471740
-/+ buffers/cache: 401548 601616
Swap: 1052216 171412 880804
Total: 2055380 1147632 907748
well i purchased a new dedicated server it has 4gb ddr2 ram and quad core Q6600 cpu.
and on 100mb shared. i havent even yet added any web site to it. but sometimes i get timeout when using whm. its hella slow :/ thats very strange and rare on new server.
frends now iam haveing dedicated server with pentium-4 and RAM is 2GB,my site online members is more than 100 members,now i feel slow in server,what i have add extra RAM or any chage in server
View 5 Replies View RelatedWhy is my hosting server usually slow and down?
CPU Usage : 100%
Main : >3GB (total physical memory: 3GB)
i dont know Do user access to website that are hosted on my server too crowded make server slow while bandwidth only have 4MB.
My account in bqbackup is very slow. Somebody here have the same issue?
View 14 Replies View RelatedIt was sent out mail at 7000 msgs/hr,
But it's only 900 msgs/hr.
Even I reboot the dedicated server, the speed is still slow.
the FTP was goosed on a personal server before and I was on my way out with the bitch, so I decided to get PSM to sort it out for me.
Came back about 5 - 6 hours later and it hadnt been fixed. No problem though as I would just do it myself. Anyway just as I logged into SSH to get it done, they did it, cheers.
I wanted something enabling on the FTP at the request of a friend but wanted to watch some TV and as I can't seem to use the laptop and watch TV at the same time nowadays, decided to get PSM to do it (its only to enable resume on the FTP, so its a simple request).
Anyway to cut the story short, the ticket was submitted 6 hours 33 minutes ago and still no response. I wont do it myself now as I want to see how long it takes them to respond, it will be interesting as they have already failed to meet their 6 hour response guarantee.
Other then tonight I can't fault PSM, whenever I use them (which to be honest is maybe once every 5 months or so) they are great and usually very speedy, but tonight its just sooooo slow, its really unusual. Anyone else noticedc this slowness tonight?
For those of you that complain about the slow loading speed of your sites due to being on over-loaded servers or over-sold bandwidth, why do you think that the discounted rate is worth the loss of customers that you might earn if your site loaded faster.
Have you ever given your sites a try on a quality host where your site loaded faster? You might be surprised at how much more effective your marketing was when surfers stay around long enough to see your site load.
Some times in the effort to secure such a great deal and save a penny, you wind up loosing a dollar, it might not make a difference to all of you but some will be surprised at the ROI for a bit better hosting!
