i have an dedicated server in USA
I wold like to install a proxy server on my dedicated box so when i surf the net i must have the dedicated server IP (from USA) not home european IP..
How i do this?
I've tryed to install squid but i can get-it to work..
I plan on purchasing a dedicated server to run a few proxy sites. However, i don't have a lot of Linux skills to administrate my own server. But i've always been able to figure stuff out so i feel pretty confident that i can get it going on my own. Anyways, My original idea was to use cPanel to run the web server for the proxy sites however i feel that using cpanel is not a great idea since i also wanted to maximize my servers performance and i hear cPanel can take heavy resources. So anyways, I just wanted to know what some other people here might think and if possible any recommended guides on setting up a linux webserver would also be appreciated as well.
View 4 Replies View RelatedDoes anyone know if it's possible to setup a proxy server on a shared web host w/ cpanel? I just want to be able to browse using FoxyProxy from the IP of that shared web host.
View 0 Replies View Relatedsomebody know is possible on some way route traffic before come to web server (apache or lighttpd)?
I want to setup lighttpd on port 80 and apache on port 81 and I want visitors to go direct to apache or lighttpd without url:81 and that must work on this way if somebody visiting url1.domain.com that go to lighttpd on port 80 and if somebody visiting url2.domain.com that go to apache on port 81 and something must route it before lighttpd and apache (and get/post must work), is this possible on some way?
I know that lighttpd and apache can do it but I don`t need it on that way!
I have a program called SOCKSCAP which lets you connect to a proxy and run programs through it via proxy.
I would like to know what I need to have this setup on a server.
Im using AJAX on my site and i need to access a seperate server instance on a different port. AJAX wont allow me to do that so i want to use Apache as a proxy but only for one page.
View 4 Replies View Relatedhow to setup a private proxy (for personal use) using web host?
What script or software to install on the web host?
I heard that some web hosting company, especially for shared hosting plans, doesn't allowed that to be installed...
Is that true?
If so, anyone know which web hosting allow it? anyone have experience doing so?
For proxy, my monthly usage will be well below 1GB.
I plan to buy a shared hosting plan to do some blog, websites & proxy.
My system consist of Ubuntu 14.04 server running LAMP. I am running Apache 2. On the same machine I am running Shiny server and running my apps through port 4949.
[URL] ....
I also am running an additional Shiny server copy on a virtual box through port 3838. All is running very good. I have an html web page running on Apache 2. I can view it and all my apps running on both Shiny servers from any place on the web.
My concern, however is security. I have port 3838, 4949, and 80 open. How can I set up Apache to run as a reverse proxy for my both of my Shiny servers (ports 4949, and 3838) and also continue to host my web page securely.
I have also attempted to set up a self-signed certificate using the following procedure but it is not working. I used the following instructions and followed them verbatim.
[URL] ....
How to set up a reverse proxy for my Shiny servers?
I have a proxy site which is hosted with a proxy host, do i have to use proxy hosting as i have an account with another host i might want to use. The proxy hosting has run out.
View 2 Replies View RelatedI'm outsourcing some works overseas and my oversea employees are directly contacting the customer to discuss his needs. Everything is fine except when a client sees the email IP address (he is dealing with a local company, how come he is being emailed me from India or some similar places).
So I decided to create a proxy server for the oversea employees. I need the one that requires the browser setting change to have all the traffic passing through the server/VPS, therefore the IP will be the IP of the server and there's no way to find the original IP (of course no problem is it exists in the proxy server, but not showing in any way to the customer).
The problem is I absolutely have no idea how to do this.
- Can this be accomplished on a VPS or a server is required?
- Do I need a Linux or Windows OS?
- Do I need any software? If so, could you recommend some.
I have heard those words hundreds of time an never have asked or read about.
View 3 Replies View RelatedDoes any one know any good proxy program other then Squid proxy, It seem to have higher load on the when Squid
View 7 Replies View RelatedI would like to run a proxy server up on a VPS which listens on 8080 for example to serve users,
View 2 Replies View RelatedI have a Linux VPS where I set up Squid to use it as a proxy server from my laptop.
On a VPS with Windows Server 2003 and IIS 6, how could I do the same thing I already do with Squid on Linux?
I knew that there was an application called Microsoft Server Proxy but it was discontinued by Microsoft.
I'd like to set up my server as a proxy for my own private use, where in my home PC's browser I can tell it the server's IP, port, and the password that I set, and it will function like a normal proxy. How can I do that? What software do I need and so on.
All my servers are on Linux machines.
a simple reverse proxy server but with good re-write rules engine.
View 5 Replies View RelatedDoes anyone have services to recommend? I simply need a proxy server so I have a private IP. Right now, my ISP assigns IPs as a pool among a lot of people, so downloading sites like rapidshare or megafile doesn't work for me.
What I need is a socks5 proxy that is available 24/7, dedicated private ip, and a fast server. Does anyone offer these types of information? What I am afaid of is that people may install keyloggers over free proxies or even some companies may do that as well,
Will i need a dedicated server for my proxy site, www.ipcover.info
If so, are there any cheap ones?
Uses about 1gb/day
400 unique visits in the past week.
About 100 visits/day
what rules should I add to IPtables on my dedicated server to use it as a proxy for my own IP only?
For example: my dedicated server IP is: 1.1.1.1
My local IP is: 2.2.2.2
I want to setup on my browse: proxy server 1.1.1.1, port 3128
What rules should I add to iptables for my dedicated server to act as a proxy but allow this only to my local IP (2.2.2.2)?
I operate a co-located server in a US datacenter (dedicated to projects of my small business, not a hosting service.) The OS is Windows 2003 Server.
I wondered if anyone could recommend proxy server software which I could use to access the web from a US-based IP address even when I am overseas. (This would be helpful for getting streaming internet radio, which has started to block access from non-US IP addresses.)
I know there are endless proxy servers available, but most are big and complicated, with 255 irrelevant features intended for regulating the internet access of a small business. I need something much simpler, preferably placing little load on the machine. The only feature needed is access restriction so only I can use it.
Is it possible to implement reverse proxy for Sever-A through Sever-B.
The issue is let's say, Server-A is located in Network-A, and the Sever-B is located in Network-B. And the users in Network-B are allowed to access only to Sever-B while the Sever-B itself can access to Server-A. So, when the users from Network-B access to Sever-B, the traffic will be proxied through Sever-B to Server-A transparently without letting the users notice about how's the traffics go. The Server-B will be linux, thus squid is the primary proxy application to deal with. Is it possible to do with squid or it needs some other application?
How about a comparison of mod_proxy for apache vs. squid as all Sever-B should do is forward the requests coming from Network-B to forward to Sever-A and acting as a middle box between the two network scopes transparently. All the users in Network-B should do is accessing the Sever-B and the requests will be transparently going to Server-A without any configuration is done at their browser or any kind of NAT/Firewall rules on either of the networks.
I have a server that is running linux with WHM/cPanel , some of servers are rejecting mails through server and says that your server is open proxy mail server.
how to check that our server is open proxy or stop open proxy and how can i prevent our server from spammer?
I am recommending to a friend who is starting a proxy site, to do a successful launch by getting a dedicated server to host the single proxy domain.
He does not want to spend more than $40 per month.
Should he be considering a VPS, or are proxy usually against TOC of a VPS?
I have found a low end server at OLM.net with plenty of bandwidth allocation for $29.95. Is it powerful enough to sustain traffic from a proxy site that is just starting out?
Specs: Refurb P3 1.0, 256mb ram, 25gb IDE, 2500 GB
[url]
Another comparable server for $29 is offered by server4you.
Specs: AMD Duron, 512MB Ram, 60gb IDE, 500GB bandwidth
[url]
i just receive an email from FDC they have this offer for me AMD 2400 2GB RAM 80GB HDD 10TB/month bandwidth CentOS DirectAdmin Proxy allowed and i have a server now it,s opteron 246 dual core with 2G ram with DA panel and 1000 G bw the proxy network i have reach 20.000 UV per day can that server from FDC well do what i need it to do or .. .. .. and can i reach 10TB with them?
View 9 Replies View RelatedBackground (so you know what I am planning)
I will be storing personal customer information in mysql, so security is driving all my requirements. I was thinking the architecture will be :-a dedicated web server within a DMZ and placed behind a firewall and border router.
a dedicated database server inside the internal network behind another firewall,
All running Linux
building out and management of the servers to be done by hosting provider or third party
Please feel free to comment on this setup.
QuestionsIs a reverse proxy a benefit for security.
Am I right in saying that a reverse proxy hides the OS and server details from prying eyes and provides another layer of security
if a reverse proxy server is a benefit, is it normally the default architecture at most reputable hosts.
I'm having problems with users using open proxies accessing, abusing, and defacing my website.
I'd like to get a list of all open proxies and incorporate it into my site (i.e. block open proxy accesses)
I've already looked at SORBS, but that is DNS based, and I'm not sure I want to go that route. (I am running one DNS server for my own webserver to use. Don't want to mess with adding another zone for the dnsbl).
I've be much happier building my own php/mysql lookup of the proxy blacklist.
So I'm looking for somewhere I can simply download a proxy blacklist, and update it periodically as needed.
i have a Pentium D 820, 2GB Ram at LT where i am hosting a few proxies. Using Centos and Directadmin.
It's realy fast and i am happy with it. The only problem i am facing is that load is jumping up to 60 sometimes but just for a few seconds. Especially when a lot of people are using the proxy and it slows down a bit. That affects only the proxified pages and not a few personal html sites i also host there.
At the moment i am seeing in top that the CPU usage varies from 0,2 to 8, 12, 21 etc but just for a second or two
here is the top output
Quote:
[root@server ~]# top
top - 12:46:18 up 23 days, 2:36, 1 user, load average: 0.36, 0.44, 0.29
Tasks: 353 total, 1 running, 351 sleeping, 0 stopped, 1 zombie
Cpu(s): 1.2% us, 0.5% sy, 0.0% ni, 98.3% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2066668k total, 1297168k used, 769500k free, 53192k buffers
Swap: 2040244k total, 0k used, 2040244k free, 273108k cached
and another output
Quote:
[root@server ~]# top
top - 12:58:34 up 23 days, 2:48, 1 user, load average: 0.58, 0.39, 0.30
Tasks: 209 total, 4 running, 205 sleeping, 0 stopped, 0 zombie
Cpu(s): 16.9% us, 5.1% sy, 0.0% ni, 77.9% id, 0.0% wa, 0.0% hi, 0.0% si
Mem: 2066668k total, 1100760k used, 965908k free, 53196k buffers
Swap: 2040244k total, 0k used, 2040244k free, 276744k cached
and the number of connections on port 80
Quote:
[root@server ~]# netstat -an |grep :80 |wc -l
216
[root@server ~]#
is there any way to tweak or optimize the server so than it can cope better when a lot of people are using the proxy.
I just bought a dedicated server with 64 Additional IP's. My question is though, how would I go about setting up SOCKS proxys on them? I've setup some before on some linux box's, but never before on windows.
View 2 Replies View RelatedI am trying to test a website and see 'exactly' what a person viewing from Germany sees. We have implemented some programming that looks at the clients IP address and then changes the content based on the region of the world they are located in.
In order to fully test it, I need to access the site via a proxy server in Europe (preferably Germany), so that the IP address will show up as originating from Europe.
I have used proxify.net here in the states, but I have not been able to find one based in Germany. The site has some flash on it, so it will also need to support flash. The one proxy I found bombed on the flash.
what webpages we can view using proxies at the ISPs.
Currently when I am on the internet port 80 will sometimes not work, i.e. MSN, email, FTP is still working, but I can't browse any pages. This has led me to believe that the proxies they are using to check what sites we are visiting are buggered. It is fruitless trying to get the ISPs to improve...
Anyway, I have a couple of my own servers in the US and am looking at installing some sort of socks proxy on them so that I don't have to use port 80 to surf webpages. Then there wouldn't be any more downtime for me.
SECURE program that would be ideal and safe for my intended use?
I'd like to make a private proxy server on a Linux VPS. That way, I can use the VPS's IP address when surfing (I would configure it as a proxy in my local browser). What software would I need for that, and how do I allow only access *from* my local computer's IP address. And can this also be done for non-HTTP traffic?
View 8 Replies View Related
