Please helo me to resole this problem with Serv-U FTP
When Windows Firewall is turn off, i can access to folder. However, Firewall is turn off, i cannot access to folder with error following : The connection with server was reset. I config windows firewall to open port :21,20. OS: windows 2003 server service pack 2.
Can anyone tell me which FTP Server software is the best software?
MS FTP vs Serv-U FTP ?
I've found a dedicated server at a great price and plan to stick with it, my first ( already have 2 vps accounts ). I don't have the money for a hardware firewall. However, I do have a chance to renew a Kerio WinRoute Firewall license from way back.
Does anyone think this would be better than the default windows 2003 firewall?
I found out that once I enable CSF it will automatically enable the virtuozza firewall with the default policy "drop anything".
My provider updated all VPS and they updated virtuozza to "parallels infrastructure manager" ..which is still virtuozza but a little bit different.
I double-checked it and anytime I restart csf to apply the new rules it will add the default policy "drop". I can change it back to default accept but obviously if I restart again it will block me out.
This is pretty strange. Once CSF is disabled and I use Virtuozza FW only everything is working.
I'm trying to iron out this huge bug with Postfix. Right now I am stuck in a hole. I am trying to disable Postfix from relaying e-mail sent to my server. When I send e-mail without "relay_domains", I get a "554 Relay Access Denied" error. When I supply a "relay_domains" variable to Postfix, I get "mail for example.com loops back to myself" for an error.
I was skimming over the Postfix docs and it said you can make these errors go away with a "virtual_mailbox_domains" or "virtual_alias_domains" variable. My config has "virtual_mailbox_domains" but still these errors appear.
Is there a way to fix this, or a way to disable Postfix from relaying e-mail?
I am trying to install Sendmail on my server and I keep getting messages to remove Postfix. My server is running Debian 3.1 (Sarge) and without Sendmail, I cannot use the PHP mail function. The PHP config is set to use Sendmail for the mail function, but I don't know how to correct it. However, without Postfix, my control panel will not function properly.
Here is my control panel's software list (required to run):
Code:
apache2
apache2-common
apache2-mpm-prefork
bind9
bzip2
courier-authdaemon
courier-base
courier-imap
courier-maildrop
courier-pop
diff
dnsutils
gcc
gzip
iptables
libapache2-mod-php4
libberkeleydb-perl
libc6-dev
libcrypt-blowfish-perl
libcrypt-cbc-perl
libcrypt-passwdmd5-perl
libdate-calc-perl
libdate-manip-perl
libdbd-mysql-perl
libdbi-perl
libio-stringy-perl
libmail-sendmail-perl
libmailtools-perl
libmcrypt4
libmd5-perl
libmime-base64-perl
libmime-perl
libnet-dns-perl
libnet-netmask-perl
libnet-perl
libnet-smtp-server-perl
libperl5.8
libsasl2
libsasl2-modules
libsnmp-session-perl
libterm-readkey-perl
libterm-readpassword-perl
libtimedate-perl
make
mysql-client-4.1
mysql-common-4.1
mysql-server-4.1
original-awk
patch
perl
perl-base
perl-modules
php4
php4-gd
php4-mcrypt
php4-mysql
php4-pear
postfix
postfix-tls
procmail
proftpd-mysql
sasl2-bin
ssh
tar
wget
how to reconfigure PHP to replace the "sendmail -t -i" command for the mail function or just how to fix it. The problem is to get the mail function in PHP to work. So I'd say the best choice would be to find another mail program to replace Sendmail and to reconfigure PHP. Any help is appreciated.
I recently upgraded my server and it is using Apache 2.2.3. I have all the same server directives as before when I was using an early version of Apache 2. The problem is that when I have RewriteEngine On, my cgi scripts generate a forbidden error. If I comment out that line, they go back to working again.
View 3 Replies View RelatedIm using RHE 4 + cpanel
Im considering Suhosin, in fact i am using it in other plain server were i have 1 or 2 sites. But this is a very high traffic with 300 + sites, lot of sites are using cms apps..
may it cause conflicts with this apps?
I installed Serv-u FTP for my server online and has open port 21 to client can remote access to FTP server. But...client cannot access to with occur error following :
The connection with server was reset.
However, when i turn off Windows Firewall. Client can access to folder in server FTP.
What 's the reason?
I notice that the Windows 2008 Firewall has some default setting opened, wonder what are the ports opened for? Anyone can give any idea? Can I close them?
View 0 Replies View Relatedis it just me or does windows firewall in Win2K3 randomly decide to block SNMP ports?... i have over 30 servers runnng Win2K3 and out of the blue yonder today 3 stopped reporting snmp data ...... the windows firewall was turned off and ICS services were not running but still ports 161 and 162 were being randomly blocked ... so now i add ports 161 & 162 to the FW and it all works but when i disable the services to be free of windows firewall ports 161 and 162 get blocked again and snmp is down [back to square 1]... so simple solution is to leave windows firewall enabled & ports 161/162 enabled rite?
View 2 Replies View RelatedI am trying to find a firewall for windows 2003 64 bit edition. So far I have tried Visnetic, which doesn't work, and comodo will not even have a beta version out until May. Anyone know of another that will work on 64 bit windows?
View 3 Replies View Relatedthere is any solution like APF+BFD in linux for a windows 2003 server?
and how about antivurs? each one do you use?
There is an advanced windows software firewall solution as CSF for linux server?
View 3 Replies View RelatedIn exception, I add ports (21,110,25,3389,80) all the ports work good, in Appearance.
I use MailEnable. When I visit the webmail for example webmail.mydomain.com I can't see it.
Do you have any idea what is happen?
What port is necesary?
good firewall program that is recommended and includes the following;
- Attack Protection (Block the IP's automatically)
- Does all basic firewall necessities
- Uses the least amount of resources (CPU, Memory) possible
- Is the best out there
I currently use Sygate Firewall and find it very useful. Just would like to know if there is anything better than this.
I am just looking for the best that would be for my server. I host a couple game servers on there, and that is about it.
What is the best Firewall that i can use for windows server 2003?
View 10 Replies View RelatedA firewall will run me another $100. Is it worth it? Do any of you run a Windows server w/o a firewall.
View 3 Replies View RelatedI'm getting a server at softlayer, and I am curious, do I need to setup any sort of security on the box like a firewall?
Or is the default install safe enough?
First of all, I am from Australia. Some people might know here dedicated servers cost a lot coz bandwidth is extremely expensive. I am hiring a box to put dedicated game servers on them (Counter Strike Source). I am looking for a Windows Firewall and Anti Virus. I am also wondering what version of Windows 2003 server should I get. Do I need to get real time protection and email scanner? And also, is it wise to download and browse TRUSTED sites on the server?
View 12 Replies View Relatedwindows 2003
limit connections per ip to a port
im currently using routix netcom
it can limit the connections( NOT bandwidth) only but not per ip
another firewall which limit connections per ip
I have a server with Windows Server 2003 and for some days alguian is trying to enter using terminal server.
How I can block the ip of the attacker?
What firewall you recommend me to install in the server?
can anyone recommend firewall software for Windows 2003 Server. I'm aware it has a firewall on board, but this one doesn't allow me to specific access to specific IP address on the server, which are configured on a single adapter.
Also, I've looked into IPsec, which is my backup solution if I cannot find a decent firewall. Unfortunately, IPsec is kind of restrictive and not particularly stateful.
I'm looking for a simple firewall, which is not too expensive. This is only for one simple server.
good software firewall solution that will allow me to block certain IP addresses from all ports.
The problem is that, the only way I have access to the server is via remote desktop. I found when you install almost all software firewall solutions, that it requires a restart. The problem here is that after the restart I probably wont have access to the server via remote desktop because it will be blocked by default by the new software firewall.
What is the solution? How do I install a firewall solution but have access to the machine via remote desktop by default?
I have Windows 2003 Server on my dedicated server...
PLESK 8.1
When I go into the Control Panel -> Windows Firewall.
It won't allow me to open Windows Firewall to configure it.
I get the following error....
"due to unidentified problem windows cannot display Windows Firewall settings".
I have checked PLESKs control panel. And there does not seem to be a service in there for Windows firewall.
My Host suppose to have contacted PLESK about this problem but they are taking far to long to resolve the issue.
We are looking for good firewall and HIDS for our windows server
View 3 Replies View RelatedI have set up a Plesk Windows server behind a CISCO PIX 501 firewall and since then am not able to upgrade Plesk to the latest version. It cannot connect to the Plesk Update server. which port do I need to open and whether it will be inbound or outbound?
View 14 Replies View Relatedwhich Firewall software is the best for Windows 2003 Server?
View 2 Replies View RelatedAny open source solutions out there for a firewall on a Windows 2003 web server?
View 4 Replies View RelatedIt looks like a change was made to the firewall settings (I think this was done by .net microsoft patch).I have manually added mysql-nt to the firewall ruleset, and this has allowed MySql to talk to the application. (Wordpress websites are now working)I still get the same error when i try to log in to the control panel.
ERROR: PleskMainDBException
MySQL server has gone away
0: common_func.php3:637
reconnect()
1: common_func.php3:600
db_connect()
2: auth.php3:134
Is there a list of firewall rules that need to be in place to allow Plesk to work?