I have set up a Plesk Windows server behind a CISCO PIX 501 firewall and since then am not able to upgrade Plesk to the latest version. It cannot connect to the Plesk Update server. which port do I need to open and whether it will be inbound or outbound?
View 14 RepliesWe are looking to replace our existing WatchGuard Firebox's with a hopefully more reliable firewall from Cisco's range although I'm a bit lost when it comes to the different ranges.
Could somebody suggest a firewall that is capable of:
1: Both NAT & Drop-in (bridge) mode
2: Pretty low bandwidth requirements, no more than 10mbit/s traffic
3: SNMP Monitoring
4: High availability pairing
What is the difference between the Cisco PIX and Cisco ASA Firewall Systems?
Also which firewall do you guys recommend for a rack of servers
Does anyone know of a place or have for sale a Cisco PIX firewall? I have looked into ebay but was wondering what else is out there?
View 3 Replies View Relatedi want a Cisco firewall suitable for one dedicated server protection, that server would host up to 30 vps
and i may buy another server in future, so what do you recommend?
from where can i get the price of cisco firewall?
View 4 Replies View RelatedI already get a new firewall for my server cisco ASA and I don't know how to config it
is there any rules to get protection from shell and virus trojan as example
specifications and pricing of different CISCO PIX 515E firewalls?
View 2 Replies View RelatedDoes CISCO ASA Firewall block SQL and XSS Injection? If not, then which are the firewalls available which do this job. I have checked web application firewalls and found them to be too costly for my budget. What are the other cheap options available?
View 3 Replies View RelatedThought this might be of interest since the PIX vs. ASA devices are frequently discussed here ...
View 1 Replies View RelatedI am in the process of gathering the peices to move from a dedicated box to my own hardware in a local colo and am undecided how best to choose the edge device.
The colo has a 30Mb pipe with about 10Mb of it being constantly used during biz hours. Another 10Mb is being allocated in the next couple of months. I want to be able to burst to the full 30Mb when needed.
I am getting 12 IP's allocated but will increase to 24 soon if all goes well (fingers crossed!).
I will have for starters just a single Proliant running dnp on 2008 with IIS, FTP, Mail, ns1 and a 2003 VM running my secondary ns.
What I am unsure of is the edge device and looking for others that have used either a 2800 series router or a ASA5500 series firewall in a similiar fashion. I know what the raw throughput of each device is, but raw benchmarks are not realworld numbers by any means.
I am looking at the 2801 with IOS Firewall turned on and hopefully even some inspects for FTP and HTTP traffic. The other option and one that I am less familiar with is to use the ASA5505 instead which will do my basic routing but supposedly provide more thourough inspects and advanced rules.
Does anyone have experiance with either of these in a hosting environment and have input on the realistic throughput one can expect from either device?
There is a signifigant cost difference with the ASA5505 being much cheaper but I am more familiar with IOS. Would anyone recommend a 1841 router instead?
It looks like a change was made to the firewall settings (I think this was done by .net microsoft patch).I have manually added mysql-nt to the firewall ruleset, and this has allowed MySql to talk to the application. (Wordpress websites are now working)I still get the same error when i try to log in to the control panel.
ERROR: PleskMainDBException
MySQL server has gone away
0: common_func.php3:637
reconnect()
1: common_func.php3:600
db_connect()
2: auth.php3:134
Is there a list of firewall rules that need to be in place to allow Plesk to work?
A firewall will run me another $100. Is it worth it? Do any of you run a Windows server w/o a firewall.
View 3 Replies View RelatedI'm getting a server at softlayer, and I am curious, do I need to setup any sort of security on the box like a firewall?
Or is the default install safe enough?
I have a server with Windows Server 2003 and for some days alguian is trying to enter using terminal server.
How I can block the ip of the attacker?
What firewall you recommend me to install in the server?
can anyone recommend firewall software for Windows 2003 Server. I'm aware it has a firewall on board, but this one doesn't allow me to specific access to specific IP address on the server, which are configured on a single adapter.
Also, I've looked into IPsec, which is my backup solution if I cannot find a decent firewall. Unfortunately, IPsec is kind of restrictive and not particularly stateful.
I'm looking for a simple firewall, which is not too expensive. This is only for one simple server.
I have Windows 2003 Server on my dedicated server...
PLESK 8.1
When I go into the Control Panel -> Windows Firewall.
It won't allow me to open Windows Firewall to configure it.
I get the following error....
"due to unidentified problem windows cannot display Windows Firewall settings".
I have checked PLESKs control panel. And there does not seem to be a service in there for Windows firewall.
My Host suppose to have contacted PLESK about this problem but they are taking far to long to resolve the issue.
We are looking for good firewall and HIDS for our windows server
View 3 Replies View Relatedwhich Firewall software is the best for Windows 2003 Server?
View 2 Replies View RelatedAny open source solutions out there for a firewall on a Windows 2003 web server?
View 4 Replies View RelatedI will be getting my first dedicated Windows 2003 Server next week. I was just wondering what antivirus, anti spyware and firewall to use.
I will be using this server to start of a small webhost business here so I need the server to be reliable.
I am running windows 2003 server.
Recently, there have been brute force attacks to try and compromise my sa password (MSSQL) and root password (MYSQL).
I would like to block certain ip addresses, but looking in the built in firewall in windows I don't see a way to do this. Is this possible with the built in tools/firewall that comes with windows 2003?
If not, can anybody recommend a simple firewall solution that will allow me to block ip addresses? I don't want something that is bloated and blocks popups, viruses, adware, etc. I just want a solution that will allow me to block ip addresses and prevent brute force attacks.
I've found a dedicated server at a great price and plan to stick with it, my first ( already have 2 vps accounts ). I don't have the money for a hardware firewall. However, I do have a chance to renew a Kerio WinRoute Firewall license from way back.
Does anyone think this would be better than the default windows 2003 firewall?
How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View Relatedwe have bought a new Cisco ASA 5505 firewall, I was wondering if anyone knows if their is any windows based applications rather than having to use ssh?
View 1 Replies View RelatedPlesk 12.x
CentOS 6.5
Any method for copying the Firewall (extension) rules from one server to another.
Since the update I have a problem with my Firewall. I need to set "Allow all incoming connections" under "Server => Firewall" in order to connect over FTP with TLS (explicit). This was working before the update without allowing all incoming connections. How to fix this in the Plesk panel?
View 2 Replies View RelatedI am having trouble connecting to my ssh server. It responds with a lengthy error message about no network etc. but it is the last message that concerns me:
Sometimes, such troubles can be caused by a misconfigured firewall.
How can I check the firewall if I cannot connect to ssh? I am running plesk 11.5 control panel and CentOS 6. Is this something I can do from plesk?
I can see that the firewall in plesk is set to allow all for ssh, but I cannot see way to disable the firewall to test ssh connection. Can this be done from plesk?
I'm in the process of installing PPA on infrastructure running Parallels Cloud Server. Each container has 2 interfaces, one public facing and a private interface for inter-server communication.
No problems installing PPA 11.5 (specifying IP's on commandline) or adding service nodes however, the firewall rules the documentation speaks of are nowhere to be seen? i.e.:
Important: After the installation, PPA creates the special firewall chain PPA-SN-Rules-INPUT used for communication with service nodes. Do not change it, otherwise, you will not be able to add service nodes to PPA.Click to expand...
Has this been dropped from PPA 11.5 ? (I recall seeing the firewall settings in 11.1) There is also no sign of the ppa.firewall tool that is also mentioned.
The only rule I see inserted is for Postgres on the management node, and 2 for pleskd on all of the nodes (open to world!).
I installed Serv-u FTP for my server online and has open port 21 to client can remote access to FTP server. But...client cannot access to with occur error following :
The connection with server was reset.
However, when i turn off Windows Firewall. Client can access to folder in server FTP.
What 's the reason?
I notice that the Windows 2008 Firewall has some default setting opened, wonder what are the ports opened for? Anyone can give any idea? Can I close them?
View 0 Replies View Related