Resolv Entries (space Separated)
I just got a very cheap box intended to learn HyperVM/OpenVZ. just got it tonight and got 5 IPs. So I add those 4 IPs in the Resources > IP Pools section. I don't know what to add in the Resolv Entries (space Separated) field.
if this is not the correct forum for this, please be free to move them.
how to create a separated DNS server?
It seems that the LSN DNS servers aren't reaching all of our customers and I've ruled everything out down to DNS.
We have a good VPS ready to take on the task of becoming our DNS servers.
I have a new VPS server in which I did not configure the /etc/resolv.conf file. My VPS has three domains that are all working and resolving fine. But I keep getting an email from my provider that says this:
The hostname (v6.volumedr.com) resolves to. It should resolve to xx.xx.xx.xx. Please be sure to correct /etc/hosts as well as the 'A' entry in zone file for the domain.
Some are all of these problems can be caused by
/etc/resolv.conf being setup incorrectly. Please check this file if youbelieve everything else is correct.
You may be able to automaticly correct this problem by using the Add an A entry for your hostname ' under ' Dns Functions ' in your Web Host Manager.
Why does the actual server hostname need to resolve via dns?
I have confirmed that /etc/hosts looks good and I added an A record in my WHM for each domain. Do I need to configure the /etc/resolv.conf file too? Do I need to list my three domains and my server hostname(v8) and then my two primary DNS servers?
I'm supposed to be completing a server migration on Saturday night. But I have one teeeeny tiny problem....
I have no DNS/nameservers provided by my new DC for the resolv.conf.
They have them - but I don't think they operate like true root nameservers or something. I keep getting a ton of Unroutable Mail Domain errors for server email that should be leaving the new box.
When the resolv.conf was set to use the 4.2.2.x dns servers - it was working fine.
And I don't know if it's ok to just keep it using those or not?...
What other DNS servers can I use for the resolv.conf? Any DC's nameservers? Are there "public" ones available somewhere?
Is it better to put the IP of your server on the first line followed by the dns servers from the datacenter? And, how do you make the changes go in effect? I assume you just restart bind?
View 4 Replies View Relatedi own a dedicated server with bind running i have assigned 2 IPs for my nameservers.
what IPs should resolv.conf contain? should it have my nameserver IPs or that of hosting provider?
My sites all respond very slow (VPS) at the initial loading, that's why I try to check all dns settings.
My current resolv.conf
nameserver 64.235.32.203
that is the ns of my hosting provider.
Would I have an advantage if I add another and if so can I simply add my own nameservers?
how to set up /etc/resolv.conf to use the rotate option.
I've tried:
options rotate
options timeout:2
nameserver X.X.X.X
nameserver X.X.X.X
Yes using NSLOOKUP and DIG both always return results from the first name server if it is up (no rotation) and when it is down, the timeout is the default 5 seconds (not the 2 that I specified) before going to the second name server.
I have 2 servers hosted with SoftLayer, In 22 Jun, I had reboot my servers, one of them didn't start and then SL said that it's was a reslov problem and we fix it, after that day, I start seeing all my websites traffic start go down , I check Google Analytics and the visitors number is going down everyday, I open a ticket and say that to SL and i think it's was a DNS problem they tell me after a lot of replys that they fix it and i must wait for 72 hours that need for the dns to be updated worldwide, I didn't say that SL support is bad no they are very very helpful support and many thanks to them, but i wanna to listen to your opinions here about my problem, and from where it's?
View 4 Replies View RelatedI have a VPS (ConetOS 4.4, OpenVZ), it all works fine, however on reboot, the resolv.conf gets reset to some nameservers that are no longer in use, How do I change this so after a reboot it uses the nameservers I am using now?
My current resolv.conf looks like this:
nameserver 85.234.133.209
nameserver 85.234.144.209
im running out of space on one of my sites but i have more then plenty of data transfer.
Unfortunately my hosting packaged it weird where they provide not enough hd space. Im trying to figure out is there a way where i can use another server or hosting company that can provide space only and use their servers just for space?
i think amazon.com offered this but wasnt sure how exactly this works.
Apache 2.2.25 on windows 32
I have a ProxyPass that looks like
ProxyPass /Share Documents http://partner2/Shared Documents/
But Apache will not start with spaces. I tried
ProxyPass /Shared%20Documents http://partner2/Shared%20Documents/
Apache would start but the passthrough doesn't work. What do I need to do? I have several url's with spaces.
which case is more preferred: a shared web hosting service with unlimited space/bandwidth, or a dedicated one with limited space/bandwidth?
View 4 Replies View RelatedI just moved to a new vps and I have "ns1.domain.com" and "ns2.domain.com" entries for my primary and secondary nameservers as well as simply "ns1" and "ns2" .... are these the same thing? Is there any harm in having both? Any feedback appreciated!
View 2 Replies View RelatedI have been searching through threads on WHT, but have not found anything really conclusive regarding this.
If I were to list two A records for the same domain name on my nameserver, such as:
www.mydomain.com -> 123.234.123.234
www.mydomain.com -> 234.123.234.123
How would most browsers handle this?
Would it only try the first entry, or would it try the first entry, and if the specified IP is unavailable it would try the second entry?
I have been trying to figure out how to allow a range of IPs with APF. I finally came across the CIDR page on wikipedia and read it though, and now I get it. I just want to confirm one thing before I implement this.
I run a gameserver where I want to allow everyone in the world to connect on a certain port, so can I use this entry?
Code:
tcp:in:d=27015:s=192.168.0.0/0
From what I understand, using the /0 CIDR suffix basically means "all IPs". So technically I could use ANY IP address for the source with the /0 suffix and it will work right?
On of my client has registered his domain (austasiapackaging.com) with BlueCentral.com . BlueCentral also provides them with mail service.
Now I have to provide web hosting for this domain. Should I change the nameservers entries or should I change the A Record? Or do I change them both?
I run my own Mail Server.
Everytime I create a new website account in WHM I am required to go in and manually edit the DNS record to include the MX record of my mail server.
I would like to streamline the process and need a way to make WHM automatically include my MX records every time I create a new account. Is this possible?
All accounst in my dedicated server start to show a very strange error_log with the following entries:
====
[04-Nov-2009 21:28:51] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/local/lib/php/extensions/no-debug-non-zts-20060613/php_interbase.dll' - /usr/local/lib/php/extensions/no-debug-non-zts-20060613/php_interbase.dll: cannot open shared object file: No such file or directory in Unknown on line 0 .....
====
Always when a php script is accessed, new entrie with this error above is created.
I dont understand because php script have not any relation with intebase or pgsql and my server have not this e db installed.
I used to have a dedicated server running Apache 1.x (1.3 I think) and in my httpd.conf there were entries about keepalives, maxservers, minservers etc.
I've now got a VPS from FutureHosting, which is brilliant. In my httpd.conf file though, there are none of the above entries. It is running the latest version of Apache (2.2.11).
Are all the keepalive / minservers settings handled automatically in 2.2 or do I just have a default setting and maybe need to add them manually?
I don't have any load issues so haven't touched the config so far.
how to delete the excessive SSL keys / CRT's from WHM?
I have so many of these freakin' things (from doing it WRONG the first few times) that I want to clean it up.
how do you clear out the KEYS / CRTS / Signing Requests from WHM?
Centos4/WHM/Apache 2.2.6/eaccelerator
My access_log is only showing entries like:
127.0.0.1 - - [28/Jan/2008:17:26:46 -0600] "GET / HTTP/1.0" 200 2860
127.0.0.1 - - [28/Jan/2008:17:27:30 -0600] "GET / HTTP/1.0" 200 2860
127.0.0.1 - - [28/Jan/2008:17:27:31 -0600] "GET / HTTP/1.0" 200 2860 ....
I discovered this forum googling and i think is a very good community, so i registered and well... as any noob, started to ask questions U.U im new in this stuff of web hosting... though i know some things... i dont have experience, its my first job in a small web hosting company, and we have a strange problem, we loss entries on /etc/localdomains when we migrate domains from one server to another and nobody knows why... we can fix it trough deleting the dns entry and creating it again on the target server. I know its kinda messy (for me at least) i hope u can give me at least an insight of where the problem might be.
We do the migration trough the migration tool of WHM
Here is some data about the target migration server, if u need something else... please tell me.
CENTOS Enterprise 5 i686 on standard - WHM X v3.1.0
uname -r
2.6.18-8.el5
vmstat 5 5 ......
I'm running a dedicated server with Plesk 8.1
For all newly created domains, they will automatically adopt a DNS template which I've set up in Plesk. But for my own domains (not clients) I've changed my MX entries in my DNS Settings section to point to the server of that of Gmail (Google). The primary server with the highest priority is "aspx.l.google.com"
To get to the point...
I receive emails on the Gmail interface, which is stored on the Gmail server, though I have a slight problem when it comes to local emails. In other words...when my server sends out an email to myself (either from a contact form, daily log files, etc...) I don't receive the emails through the Gmail interface, but rather through my POP server, which is logical, since my server is most probably configured to use "mail.yourdomain.com" and not "aspx.l.google.com".
Question :
How can I have both incoming emails (from other domains/servers) and local emails (from my own server) go through the Gmail server? I'm guessing that I'll have to edit Sendmail or PHP or something, though I'm not sure, that's why I'm posting this.
Sorry if the post is a bit confusing. I tried my best to explain the situation, though if you have any questions, please respond with them.
I adding to iptables:
Code:
iptables -I INPUT -s XXX.XXX.XXX.XXX -j DROP
And after a dozen so minutes or several hours iptables --list is clean.
I have set up a pair of name servers, the first one is accepted by the registrars and the second one is not. They have been configured identically as far as I can tell.
It appears that some test is run by the registrars to see if the name server can be used.
Is there any way I can find what test it is and get a way to run it to see what the problem is?
Are there scripts or sites where I can run whatever type of test it is and know what the problem is?
I just transfered an existing client of mine to one of my servers but he has MX entries.
I entered the MX settings in Cpanel for him but im wondering if I have to actually add all the mail accounts? Im assuming since he is using MX entries then he is using a seperate server to handle all the accounts. Am I right in my assumption? Do I have to add all his mail accounts into cpanel?
Is this someone trying to gain access to the server and just trying different password or ways? The server is new with no websites hosted yet but already getting this.
Will Brute Force not take care of this?
Is this common? Any ideas?
**Unmatched Entries**
sendto(72.64.118.118): Operation not permitted: 72 time(s)
sendto(69.182.190.97): Operation not permitted: 73 time(s)
sendto(66.93.44.19): Operation not permitted: 72 time(s)
WHM 11.15.0 cPanel 11.18.3-C21703
CENTOS Enterprise 4.6 i686 on standard - WHM X v3.1.0
Few days ago i upgraded cPanel, and then Apache, PHP5, eAccelerator, hadn't updated in ages.
Server worked lightning fast compared to old (PHP 4, older Apache, no eAccelerator), and seemed stable.
Few hours later, server is unresponsive, it took over a day to get the server on the status that i can even see what's happening!
Downgraded back to PHP4, removed suhosin. Still happens. Reworked all the configs, and took all resource limits so low that it survives that, PRM gives 12secs time, enough apache processes etc. Maximum clients lowered to 50 etc. you get the general feel what i did, just to see what's going on.
Now the server survives those 2200+ processes somehow and comes back responsive in some minutes. Killing all PHP processes alone does not solve the problem, but need to restart other services too. All services tend to start crashing when this happens.
Thing is, they are specific user PHP processes, ALL of them, and thus HTTP Request (suPHP), but no log entries for those, i do not see where from they originate, what PHP files are being requested, reworking individual PHP files for that account didn't help at all etc.
I cannot just suspend this account, it's an high importance account for my own needs.
This account gets ~2½million requests a month regularly, and server can handle that.
There was one new reseller account setup for someone else the day this started happening (i upgraded to PHP5 just after accoutn creation) but i think that's unrelated.
Any ideas how to start pursuing a resolution for this? It has started happening more frequently than before, so i'm also suspecting a DDoS, ubt there should be log entries.
Is it possible the requests come so fast that Apache just don't have the time needed to write log?
HDD is the bottleneck actually on this server (ty Leaseweb, you guys gave me the worst HDD of the size you could find and want to charge 25euros a month extra for a proper HDD of same size, 250gb!)
I get this error with netdiag:
DNS test . . . . . . . . . . . . . : Failed
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.FIRST.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[WARNING] The DNS entries for this DC are not registered correctly on DNS se
rver 'DNS.SECOND.IP.HERE'. Please wait for 30 minutes for DNS server replication.
[FATAL] No DNS servers have the DNS records for this DC registered.
configuration:
Server is a DC/AD. It has 2 IP's, both are static of course. the DNS Servers are manually added into the network configuration properties, as these are provided by the hoster.
How I can update DNS entires of multiples accounts in Cpanel.
View 0 Replies View Related