Searching a while I learn that phpsuexec is not native in Plesk. But it's years or months ago. I'd like to know if now is there any easy way to install phpsuexec (or any alternative: suexec, suphp...) in Plesk?
I have a VPS with Virtuozoo and Plesk, and it could be better if scripts run with owner's permissions. There're 2-3 users on the VPS and I don't want to config Apache to run with special user apart from nobody.
As all we know suPHP or phpsuexec are coded to let apache run the script with file's owners name and not the "nobody"
1- Plesk does not support phpsuexec but its possible to setup suPHP on plesk! Any comment, suggestion experience?
2-My alternative
I create a group for each single user named "apacheUSERNAME" and will assign both apache and the user to this group.
Then I will change the group for any file/directory that needs 777 permission.But instead 775.
Again suggestions are appreciated
3-Final comparator should be server load; How will be the server performance(load) with or without suPHP or phpsuexec
i wanna to install phpsuexec but i know that i will have problems with .htaccess files.
if i install phpsuexec how can i avoid the 500 error from the .htaccess?
Should we not be using PHPSuExec with FastCGI?
View 1 Replies View RelatedI'm wondering which one is the best with cPanel and Apache 1.3.41. The server will be used for shared hosting.
View 11 Replies View Relatedi have a server run with phpsuexec and php4 default,
i want to let certain account run with php5,
it looks likely i can add a php.ini in the account,
"how to install/setup phpsuexec" specially in Cpanel/WHM servers.
View 1 Replies View RelatedCan anyone tell me the difference between SuExec and PHPSuExec. I hear eaccelerator will not work with PHPSuExec but will it work with SuExec?
View 2 Replies View Relatedwhat is phpsuexec and suexec and how to stop them ?
View 1 Replies View Relatedfor servers to have PHPsusexec enabled or not? Is it advisable?
Btw I know Apache has the phpsu module. Is it similiar to PHPsuexec? if i didn't compile Apache with that module, does it means when i enable PHPsuexec through cPanel, it won't work?
I was wondering if it is the script problem or the settings problem. I have a script that upload and create files, however it always have things created (eg. folders) in nobody's group and owner. However when I do it in FTP, the permission was set to the user's. Can anyone advise what problem it is?
What's the simplest way to switch over to phpsuexec on a cpanel box, a smooth transition for all domains hosted? Basically, after I complile apqache (via whm preferrably) with phpsuexec and the current (php 5 / apache 2.2) do I need to do anything else, run any commands? I did this in the past, but cannot remember the exact steps.
View 1 Replies View Relatedis there anything I should do now?
everthing generally seems fines but I have a strange thing going on with an images folder that a php script puts users images in (so my users can upload files). this folder was previously 777 and now phpexec has been installed the images are not showing up. I get a "You don't have permission to access" message on the image files. I tried chmod'ing the images folder to 766 and 755 and the same thing happens. This has nothing to do with the php script as I can't even access the image files by typing in the URL in a browser.
I am running Joomla on a server and am trying to get phpsuexec to work with it, so far without success. From searching the web and forums I managed to get rid onf my 403 and 500 errors, but now I am dealing with blank white pages on all of my sites where the page being loaded is a php file.
I have all of my php calls removed from .htaccess and put into a php.ini file.
What else am I missing here? Is there a conflict in my apache build maybe?
My server has update to
WHM 11.11.0 cPanel 11.15.0-R17665
CENTOS Enterprise 5 i686 on standard - WHM X v3.1.0
apache 1.3.37
and now the server run without phpsuexec so i try to recompile apache with php security and suphp module but the php.ini files still didn't work in the client's sites and there is alot of scripts want php.ini files for safemode = off , etc even the top process show me nobody not users to know who spam or other tings
i run this command
/usr/local/cpanel/bin/rebuild_phpconf --current
and i got
php has not yet been configured with EA3
with the new update cpanel i can't run php.ini files anymore
We have a strange issue where include('./somebadfilepath.txt');
Will not output the standard WARNING from PHP. Instead it just displays a blank page.
phpsuexec is installed.
This also happens for other functions like fopen or fopen when supplied a URL path. No error,
We have a server that we just changed over to PHPSUEXEC. On this server, we have a large IPB (Invision Power Board) forum that we have not been able to get uploads in the forum back working again. Users are getting the message that they don't have permission, and to contact an administrator.
I have looked on IPB's forum for PHPSUEXEC related issues, but can't find a solution. Of couse, before phpsuexec the "upload" folder had 777 file permissions, but under phpsuexec this must be 755. It isn't working though.
Anyone had experience with this with IPB and know how to fix it?
Does anyone know the step by step procedure for compiling apache with phpsuexec enabled and making apache recognize php on a non-cpanel server?
View 0 Replies View RelatedBest platform for IMAP mail (Cpanel, Plesk Linux or Plesk Windows)
I need to setup 5 email accounts on my domain, each will use IMAP and store messages on server, so total space taken by each account will be 2-5 GB.
I have decided to go with eurovps.com as I'm close to them and ping is fast.
What is the best solution for IMAP and large email accounts: Linux Cpanel, Linux Plesk or Windows Plesk?
Each account will be accessed by 2 people differently by Thunderbird and occasionally by webmail, so nice webmail is a plus.
I have a server running Linux and PLESK, and am interested in switching to Windows and PLESK. Will the backups made under Linux restore under Windows?
View 1 Replies View RelatedI just shut down my server, via Plesk's CP.
Now SSH and Plesk doesn't seem to be working.
What can I do?
Would I have to ask my host to do a hard reboot?
i got plesk 8.0, and trying to update with the updater to more recent versions.
updating fails.
I tried with incremental updates (8.0 > 8.1 > 8.2 etc.), but it never works.
I haven't really touched the configuration since I got the server.
this is the error I'm getting:
Code:
===> Set up monitrc_vz.tpl as template for monitrc
===> Registering module
===> Configuring module
/tmp/monitrc.chk: No such file or directory
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
Control file syntax OK
ERROR: An error occurred during installation of packages.
Attention! Your software might be inoperable.
I installed a Plesk vps and APF firewall.
If apf is enabled, I cannot access Plesk. I get this error via virtuozzo panel (vzpp)
If I disable apf, it works fine. Not sure what's wrong here.
My settings for APF are:
IFACE_IN="venet0"
IFACE_OUT="venet0"
SET_MONOKERN="1"
IG_TCP_CPORTS="20,21,22,25,53,80,110,143,443,465,993,995,8443"
IG_UDP_CPORTS="37,53,873"
EGF="1"
EG_TCP_CPORTS="20,21,22,25,53,37,43,80,113,443,465,873,5224"
EG_UDP_CPORTS="53,873"
I duplicated this problem with CSF also. Any ideas?
Using Plesk 8.3 linux on a vps.
how csf firewall should be set for plesk (linux)?
I get this error when firewall is enabled (duplicated with apf and csf, tried both). Error goes away if firewall is disabled.
Service is not available now, probably your Plesk is misconfigured.
I have this:
# Allow incoming TCP ports
TCP_IN = "20,21,22,25,53,80,106,110,143,443,465,953,993,995,2855,8443"
# Allow outgoing TCP ports
TCP_OUT = "20,21,22,25,53,80,106,110,113,443,953,8443,9999"
# Allow incoming UDP ports
UDP_IN = "20,21,53,953"
# Allow outgoing UDP ports
# To allow outgoing traceroute add 33434:33523 to this list
UDP_OUT = "20,21,53,113,123,953"
I'm trying to install Plesk on an OpenVZ VE. OpenVZ node is running 2.6.22 kernel on CentOS5 64 bit. VPS is CentOS4 32 bit.
When running the autoinstaller I get the following error:
Code:
Start packages installation
Install package psa-firewall-1.0.1-cos4.build82070706.15.i586
Trying to establish test connection... connected
done
===> Checking database
===> Checking kernel support for iptables
Plesk Firewall cannot be run under your version of Virtuozzo.
Virtuozzo 2.6.1 or later is required.
The installation cannot continue.
error: %pre(psa-firewall-1.0.1-cos4.build82070706.15.i586) scriptlet failed, exi
t status 1
error: install: %pre scriptlet failed (2), skipping psa-firewall-1.0.1-cos4.bu
ild82070706.15
ERROR: Error while execute command rpm -U /root/swsoft/PSA_8.2.0/dist-rpm-CentOS
-4.2-i386/opt/modules/firewall/psa-firewall-1.0.1-cos4.build82070706.15.i586.rpm
Errors just before:
- Error while execute command rpm -U /root/swsoft/PSA_8.2.0/dist-rpm-CentOS-4.2-
i386/opt/modules/firewall/psa-firewall-1.0.1-cos4.build82070706.15.i586.rpm
ERROR: Installation failed
[root@server plesk]#
I've bought a windows vps, I'm very newbie with it. My host told me that asp.Net 2.0 is installed on my vps, though I may need to set my site to run using it within IIS.
I've trying to read the forums, google, etc. and I don't find where or what do I have to do to set the asp within IIS with plesk.
With Cpanel, when i setup a new webhosting account you can access the webspace at ns1.xxxxx.com/~username.. you can also connect to ftp and upload your site using this before propagation takes place so there is no downtime.
i have just started using plesk and have gone through all the pdf guides and cant find where it mentions how to access the webspace that i have setup through the ip address. im trying to look at the site and connect via dreamweaver.
can anyone assist me. i have tried ns1.xxxxx.com/~username and hoped it worked the same as cpanel but it doesnt seem to.
I colo my own servers and need plesk for a month before we sign up to be a partner - where can I go rent one
View 7 Replies View RelatedI am currently having problems performing FTP on my site. The web user section is under "root" and not under the virtual domain owner. How do I change the permissions back to the virtual domain owner in this instance?
My standard FTP for the domain only works if I SFTP, so does this mean the actual domain has gone under root aswell? how do I change this?
Also - I get this when trying to create even a directory in my virtual plesk account while logged in:
Unable to create directory /web_us: filemng failed: mkdir: cannot create directory
`/var/www/vhosts/mydomain.com/web_us': Permission denied filemng: Error occured during /bin/mkdir command
I just got plesk installed on my dedicated server and when I try and access the site it give me the following error
Code:
You are not authorized to view this page
You do not have permission to view this directory or page using the credentials that you supplied.
Please try the following:
* Contact the Web site administrator if you believe you should be able to view this directory or page.
* Click the Refresh button to try again with different credentials.
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Internet Information Services (IIS)
Now the server is running Windows Server 2003 Standard
I have been doing a bit of testing of MS SQL on Plesk, and I have a local database (MS SQL Standard 2005) and I can make a create script which references MDF files. However I'm not sure how I would import this into MS SQL? Whats the best way to export data from MS SQL and then import to a new server?
Version of MS SQL: Express 2005
Version of Plesk: 8.2
Where would the my.cnf file be kept for Plesk?
I found one in /etc, but the max_allowed_packet option was there.