Cisco ASA 5505 - Any Windows Based Apps

Oct 22, 2009

we have bought a new Cisco ASA 5505 firewall, I was wondering if anyone knows if their is any windows based applications rather than having to use ssh?

View 1 Replies


ADVERTISEMENT

Cisco ASA 5505 Vs. Juniper Netscreen 5GT

Oct 23, 2007

I've been looking at these two Firewalls for a quite some time and I am not sure which one I should go with. Price is not a factor since both are around the same price range.

The firewall is going to be in between my DROP and LAYER3 Switch.

So...FastE -> Firewall -> Layer3

As you can see, I dont want any fancy VLAN stuff or anything like that since my switch can take care of all that. I just want a firewall which is easy to configure and manage and has DDoS protection built-in.

If you have any other hardware based firewalls in the price range of ASA 5505 and Netscreen 5GT then I would want to hear about those as well.

View 14 Replies View Related

Cisco ASA 5505 Suitable For Low Bandwidth Colo?

Sep 16, 2007

Is a basic Cisco ASA 5505 suitable for a low-bandwidth colocation environment? I run a small virtualization network, going to be expanding to multiple hosts with a SAN and looking for something that is more secure and easier to manage.

Right now, I only have 12 virtual servers and I'm only pushing about 1-1.5mbps on average, though going to be expanding it so my capacity will be about 4x, including multiple physical servers and a layer2 switch. Sometimes managing it even now can become a PITA.

I would like to use an external firewall, but don't think I need something as hefty as an ASA 5510, as I doubt I'd max out the 5505 on throughput. I'm also sceptical about putting up a m0n0wall/pfSense box, as it might not be as cost effective to put it on new, reliable hardware, and putting it on some older/purchased off Ebay server could be unreliable as it is the entry point to my network.

Think the ASA 5505 would be a good entry level point?

View 4 Replies View Related

Approx Click Path Through Log File (IP Based) Apps

May 21, 2007

application which can show me click paths for different IPs through log files,

Addition but optional requirement
An open source application it will be additional help as I will be able to add my needed features too. I am also very comfartable in PHP compare to any other language (because of all the open classes I know).

View 0 Replies View Related

Plesk 11.x / Windows :: How To Setup Server For Google Apps (Email)

Apr 17, 2014

I want to use Gmail to host my email. I have already confirmed my domain and now I can successfully send emails via my domain.

However in order to receive emails I need to add/update the MX records on my server. I did that (I think) but now, 24h later, the records don't seem to be updated yet.

For instance intodns.com still shows that there is only one MX record: [URL] ....

This is my setup where you can clearly see the MX records required by Google:

I changed the TTL to some minutes but still the changes don't seem to be propagated.

The screenshots are taken from "Website & Domains" -> my domain -> DNS - that should be the right thing to change, correct?

View 1 Replies View Related

Plesk Windows Server Behind CISCO PIX 501 Firewall

Oct 25, 2009

I have set up a Plesk Windows server behind a CISCO PIX 501 firewall and since then am not able to upgrade Plesk to the latest version. It cannot connect to the Plesk Update server. which port do I need to open and whether it will be inbound or outbound?

View 14 Replies View Related

Hosting Windows Based Application

Oct 13, 2009

We have a Windows based application (Win32 app) that we want to host through a browser.

I can't find much information on the web, however I came across these guys who seem to do what I need: [url]

Does anyone know what technology they use to host Windows applications? And can it be used on a Mac or Linux? Does anyone know of anyone else who does this type of thing?

View 7 Replies View Related

Windows Based Hosting For A Big Website

Jun 18, 2008

I was going to use reliablesite.net to host my website, but I guess I'll wait and try to find something better.

What I need is a hosting provider that is relatively cheap, windows based (I use .net) and that can handle big amounts of visitors.

View 12 Replies View Related

Wincache Solutions For Windows Based Plesk VPS?

Oct 25, 2009

I am planning to move this moodle installation

[url]
to this one
[url]

However as you may have noticed the second one runs very slow.

On the first one I am using Microsoft's Wincache, however on the second
one I am not using any cache solution as it seems that Wincache does not work.

I tried to follow the following instructions
[url]
but all I got was this FastCGI Error message "Error Number: -1073741819 (0xc0000005)"

So I was wondering if someone can recommend me any alternative solution

View 0 Replies View Related

Urgent Need Relaible UK Based Windows Dedicated Server

May 18, 2008

I usually host just PHP but a new client needs to use ASP and SQL Server. So I urgently need to find a UK based reliable Windows Managed Dedicated Server for around £100 to £150 per month.

The site only gets 1000 visits per week and runs a multi community from a 500MB SQL Server database.

I'm scared to go with a cheap host like 1&1 or Fasthosts but also think Rackspace may be way too expensive.

Is a dedicated server overkill for such a site?

Anyone know of a solid relaible host that can offer this with great 24/7 skilled support and daily backups.

I need to have a solution for client by Tuesday or they may go elsewhere.

View 7 Replies View Related

What Is Difference Beteen Linux And Windows Based Web Hosting Plans

Apr 12, 2009

This makes me confused when signing up.

View 14 Replies View Related

Windows Server 2003 Automating Image-based Installations

Jul 4, 2008

I have a solution on how remotely using IP KVM and WinPX to install images-based windows server.

But we need a solution that can automate this process.

This is because I need to provide a hight availably service, and if our web cluster is taking hight load I want to be able to clone a new server for master image and get it work in a cluster.

View 1 Replies View Related

Apache :: Converting Config From IP Based To Name Based Virtual Hosts

Feb 26, 2015

I have a task of converting a current Win Server based apache server from multiple IP based virtual hosts to a full name based virtual hosting.I'm famiilar with the steps but I was wondering if there are any gotchas in Windows that I should be aware of. It seems that now matter what I change in the new config it doesn't work or work as expected.

View 1 Replies View Related

Cisco 2950 - How To Enable "Cisco Network Assistant"

Dec 16, 2007

My host has helped me to install a switch. However, I don't know how to configure using the command line. Could anyone help me?

I need to be able to connect to my Cisco switch using Cisco Network Assistant. If you know the command sequence,

View 5 Replies View Related

Using Google Apps

Jan 18, 2008

What can be disabled (Mail related) if the only domains on the server use google apps "gmail" for mail? I only really need roots mail. Anyone tried this yet, I figured I asked before I use trial and error.

antirelayd
exim
imap
pop

View 0 Replies View Related

Google Apps Alternative?

Mar 17, 2009

does anyone know of a google apps alternative seeing as google apps is no longer free.

View 4 Replies View Related

Google APPS And MX Settings

Feb 7, 2008

I want to shift my mail to Google Apps (standard version). Currently my DNS is pointed towards 1and1 dedicated servers (having problems with 1and1 mail services). Want to keep hosting with them but change the Email to Google apps.

The Registrar of the domain is Netfirms, Inc.

My current Settings for nameservers in Nefirms CP are:
ns29.1and1.com
ns30.1and1.com

Google Instructed me to verify first by creating a CNAME, which I did in Netfirms control panel.

'googlexxxxx.mydomain.com' Pointing to 'google.com'

DONE.

Google gave me the MX records to enter in the Netfirms panel.

ASPMX.L.GOOGLE.COM
ALT1.ASPMX.L.GOOGLE.COM

DONE.

It's been more than 24 hours, neither MX updated not that CNAME lookup 'googlexxxxx.mydomain.com is propogating.

What I am supposed to do here? I am waiting here for last 24 hours. I think that I have to set up these settings with my registrar (Netfirms) rather than it has to do something with 1and1?

Any suggestions?

View 1 Replies View Related

CPanel And Google Apps

Oct 5, 2009

I'm using cpanel and google apps. I made mail in google apps mail@mydomain.com

I set up MX entries. When I sending mail from e.g. yahoo or hotmail to mail@mydomain.com I can receive it. But when I'm sending mail from php contact skript which is located at my site I cannot receive mail, like it doesn't exist. why?

View 4 Replies View Related

Google Apps / Email

Mar 21, 2008

attending to clients and their email inbox limits is occuring more frequently
i'd prefer to minimize this chore, especially now i have some clients using IMAP it means the server fills up rapidly.

google apps -just for handling email- seems attractive (6GB free) compared to increasing the monthly fee for extra server space which seems to be kind of expensive at my webhost.

i would actually prefer to keep using the Webmail interfaces offered on the servers but i dont think my clients will change their bad habits of filling up their inbox, and lets not forget the increasing levels of SPAM.

what are other people doing with email?

are many people outsourcing it to google?

i'd appreciate any other ideas or suggestions.

View 0 Replies View Related

Do You Use/recommend Google Apps For Domains? Why/ Why Not?

Jun 10, 2008

I was considering using Google Apps for domains, for my other domains but would like to hear people's opinions on it first.

Do you use/recommend Google Apps for domains?

Why do you use/recommend it, if you do? or Why do you not use/recommend it?

View 4 Replies View Related

Dns Information In LXAdmin For Google Apps

Apr 9, 2008

You use FCName for setting cnames in the dns info. for google apps like calender, docs etc., right!!! then how do you provide the ttl values.

View 2 Replies View Related

Google Apps Custom Url, Cname And WHM

Mar 16, 2007

i am trying to use a custom url (example: mail.mydomain.com) for my google apps e-mail.

i can't seem to figure out how to set up the CNAME in WHM to allow this to occur and google apps' help function is not well ...

View 0 Replies View Related

Mismatch In Time Between The Server And Apps

Jun 16, 2009

Thought of sharing this with all.

Issue:

Php function was returning wrong time. There was a difference of 1 hour between the server time and the php time. Due to this ,most of the functions on the site were not working properly.

Fix :

For checking the php time, put the following code in a file, say time.php

Code:
<?php
$time = time();
$result = date(”Y-m-d (D) H:i:s”,$time);
echo “Current date and local time on server = $result “;
?>
Execute the php script.

Code:
[root@localhost ~]# php -a time.php
Interactive mode enabled
Current date and local time on server = 2017-01-30 (Mon) 18:04:25
To get the server time , issue the following command :

Code:
[root@localhost ~]# date
Mon Jan 30 17:04:25 IST 2017
You can see the difference of one hour between the server time and the php time.
For fixing this, you need to install the PECL timezonedb module.

Code:
[root@localhost ~]# pecl install timezonedb

At the end , you might see the following message :

==========================

Build process completed successfully
Installing ‘/usr/local/lib/php/extensions/no-debug-non-zts-20060613/timezonedb.s o’
install ok: channel://pecl.php.net/timezonedb-2009.6
configuration option “php_ini” is not set to php.ini location
You should add “extension=timezonedb.so” to php.ini
==========================

So , add the line ” extension=timezonedb.so” to the php.ini file and restart apache.

There shouldn’t be any mismatch in time now.

View 1 Replies View Related

Automatically Starting Apps On Bootup

Jul 31, 2008

i just can't get this app to start up automatically.

i've put a script with execute permissions into my /etc/init.d/ folder, and ln'ed it to my rc.d/rc5 directory as S50myscript.

no go. and i don't even know where to look in the server logs to see what the issue is?

View 2 Replies View Related

Have Hawkhost, Who Should Host DNS- Using Google Apps

Nov 9, 2008

I currently got signed up with Hawkhost and I love the interface so far. I bought all my domain names through Name Cheap. I wanted to see what you guys thought would be the best set up...

I would like to use Google Apps to host my email and not hawkhost.

I have two options: I can have hawkhost host my DNS or NameCheap. Do you guys think it would be better to let Namecheap host my DNS and just point the www record to my website?

Just curious what your guys were on letting the webhost host the DNS and if there were any cons with that.

I'm sure hawkhost is reliable, but I just don't like putting all my eggs in one basket and would prefer to have Google host my email...

View 10 Replies View Related

Mail Pointing To Google Apps

Jan 8, 2008

I have setup the DNS records for my domain, just need it confirming by someone.

Domain is registered using godaddy, so using their default nameservers and modified the records:

A Records:

Host Points To TTL
@ http_Serverip 1 Hour

ftp ftp_Serverip 1 Hour

www http_Serverip 1 Hour

* http_Serverip 1 Hour

cnames:

Host Points To TTL

www @ 1 hour

MX records:

Priority Host Goes To TTL
10 @ aspmx.l.google.com. 1 Week

20 @ alt1.aspmx.l.google.com. 1 Week

30 @ alt2.aspmx.l.google.com. 1 Week

40 @ aspmx2.googlemail.com. 1 Week

50 @ aspmx3.googlemail.com. 1 Week

Hope you can work out the above tables, I have website pointing to a server and mail pointing to google apps.

View 2 Replies View Related

Google Apps :: Need SMTP On My Server?

Jun 25, 2008

If I have set up google apps for domain, do I need any MTA/SMTP server running on my server?

View 3 Replies View Related

Google Apps Administration And Integration

Nov 3, 2008

Our company uses Google Apps for Domain (and we are very satisfied with it). Until recently, we were accessing our email via[url], but we then realized that it can be accessible via [url]by updating CNAME and MX records for our DNS zone. We have full access to WHM and cPanel.

However, what we are trying to accomplish, if possible, that, when someone types [url], it does NOT redirect him/her to [url], but it remains on that very domain. For example, the address for GMail inbox in that case would be [url]

View 4 Replies View Related

Google Apps, Email Login

Aug 31, 2008

I have a question regarding Google Apps when it comes to my email login. (Have searched extensively on Google App's support, but to no avail)

I have created the email address kim @ kimstewart.ca through Google Apps and have set my MX records through HostGator. Propagation looks to now be complete and my emails are sending and I am able to receive. However, when I access my emails through the Google Apps dashboard, it takes me to this rather long and convoluted URL:

[url]

I was hoping to just be able to log into www.gmail.com and enter my email/password to be able to login. It this not possible? Or do I need to do some more tinkering from Google Apps in order to make this work? (I also have an iGoogle account I would like transfered over to my Google Apps email.)

View 2 Replies View Related

Improving Performance On IIS - PHP And MySQL Apps

Sep 21, 2007

I'm having some performance issues on IIS with my PHP and MySQL applications. I'm also starting to see some errors.

One of my main apps is vBulletin. I've tried posting there for help, but not many people there have experience with IIS.

See this thread:
[url]

View 8 Replies View Related

Mod_evasive Bans Some Legit Apps

Dec 10, 2007

mod_evasive bans some of the legit users (galleries , typo3 etc.) with following settings:

<IfModule mod_dosevasive20.c>
DOSHashTableSize 3097
DOSPageCount 10
DOSSiteCount 150
DOSPageInterval 1
DOSSiteInterval 3
DOSBlockingPeriod 10
</IfModule>

Somebody have an idea for some less restrictive but still usefull rules?

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved