I'am partner with cloudflare I have the follow question:
As my subject says how can I install cloudflare for PA? (I already install the addon extension ServerShield Plus by CloudFlare) but pretend install CloudFlare for PA [URL] ....
Where I can get:
[URL] ....
POA IP, POA API, etc?
I configured Cloudflare in admin panel, I then logged in using my test customer account, I tried to install CloudFlare application (without license key for free mode) . I got the following error:
Error: Installation of CloudFlare for Parallels Plesk at http://MyLinuxWebsite.cyberhostpro.com/CloudFlare failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: SimpleXMLElement::__construct(): Entity: line 6: parser error : Opening and ending tag mismatch: hr line 5 and body in /usr/local/psa/var/apscache/data-mezJCJ/scripts/configure.php on line 262
[code]....
I deleted the Domain from Cloudflare but did not deactivate it before from Plesk. I add again the Domain and try to deactivate it but you can deactivate it.
(Error) CloudFlare can not delete domain.tld from this interface. your Plesk server is not the authoritative partner with CloudFlare for your domain.
What is the way to deactivate and uninstall Cloudflare?
I screwed up on a server and didn't input my account, now I cannot find a place where to set it up globally.
How to do this once it has been setup?
Is it possible to install Plesk 12 to Debian Jessie with the autoinstall script?
View 7 Replies View RelatedI am having issues setting up CloudFlare on out PPA system. I have is setup under Hosted Applications. I have setup a Resource for CloudClare and added it to the service templates. When i go into a clients Control Panel to install the app, I get a couple different errors. When i try to use a previously setup administrator for the subscription, which is listed under "Grant administrative access to existing user," I get the following error:
"Error: Installation of CloudFlare For PA failed. invalid values passed for settings of application resource; details for setting with id 'admin_username': The "CloudFlare username" setting value 'xxxxx' is already in use. Please provide unique value." Is this because I am logged in as the user?
When I create a login under "Use administrative credentials not connected to any particular user," I get the following error: "Error: Installation of CloudFlare For PA failed. Invalid structured output returned by script: Failed to parse structured output. Structured output: '<output xmlns= URL.... WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service.'. "
I do get an email from CoudFlare with the setup instructions for the new account.Under the PPA control panel, I am using the IP address for the Management Node in the "POA API IP" field. Is this correct, or should I have entered localhost?I am running 11.5 Update 8, and CloudFlare For PA (3.0.2-18).Setup instructions for Plesk or POA does not quite cover everything for a PPA installation.
Easy way to install 5.2 with plesk i try all old threads but these not working ....
View 2 Replies View RelatedI wanna know How to install php 5.5 in my Plesk 12 CentOs 6
View 4 Replies View RelatedI am using Plesk for my website and I want speed it little bit so I wanna install an APC without screwing everything.
View 16 Replies View RelatedI am trying to install Plesk 11.5.30...I have downloaded the autoinstaller to my CentOS 7 server:
# wget http://autoinstall.plesk.com/plesk-installer
#chmod +x plesk-installer
#./plesk-installer --all-versions
I have also tried:
# ./plesk-installer --select-release-id PLESK_11_5_30
But i only get options from Plesk 12.0.18 to 12.1.15. I should run /usr/local/psa/admin/sbin/autoinstaller --all-versions to install older versions of Plesk, but when i run this the file does not exist.How do i install Plesk 11.5.30?
I have installed PHP 5.6 following this guide (enabling php 5.6 in remi) but I can't select the new version of PHP from hosting settings page in domain administration. What is ionCube?
View 5 Replies View RelatedHow can I install OpenProject on Plesk 11.5 (Debian 7.7) without problems? How to add vhost for OpenProject and keep running my other websites?
[URL] ....
I would like to know the process to activate or install mcrypt module on my php ?
I'm on
OS Ubuntu 10.04.3 LTS
Plesk 12.0.18
I get the following error:
===> Checking for the necessary system accounts
Checking for the system groups and users necessary for MySQL...
Checking for the group ''...
Trying to add group ''... groupadd: '' is not a valid group name
ERROR while trying to add group ''Click to expand...
How do I install FFMPEG on Pleslk 11.5?
View 1 Replies View RelatedI trying to install Joommla via XML-RPC API. (Plesk version : 12.0.18 Update #13 - API version : 1.6.6.0)
Here are my methods
1. get Package list
2. download package
3. install package
if I try with Wordpress, I don't have any problems.
With Joomla : step 2 : I've got this message in log file :
ERR [panel] Error during package add to repository: Add-ons for APS packaged web apps are not supported.
ERR [apscatalog] Error during downloading package from APS Catalog: Add-ons for APS packaged web apps are not supported.
ERR [panel] Task failed: id=95, pid=21231, type=aps-download, error=Add-ons for APS packaged web apps are not supported.
If I install via http admin interface, install works.
I tried to install an additional version of PHP followuing this guide [URL] .....
But when i launch this command (the same of the guide but I substitute "php540" with "php55") I retrive the following error:
./configure '--with-libdir=lib64' '--cache-file=../config.cache' '--prefix=/usr/local/php55-cgi' '--with-config-file-path=/usr/local/php55-cgi/etc' '--disable-debug' '--with-pic' '--disable-rpath' '--enable-fastcgi' '--with-bz2' '--with-curl' '--with-freetype-dir=/usr/local/php55-cgi' '--with-png-dir=/usr/local/php55-cgi' '--enable-
[Code]....
So I have a client using Wordpress 3.6, so the scan does little good.
I update the Wordpress to 4.1.1 and do the Scan again. Plesk cannot find the updated install of WP still?
When trying to install magicspam (magicspam-plesk-1.0.8-1.1-precise64-postfix.amd64.deb) in the extensions management I get the following error: Error: Unable to install the extension: Unable to install the module package file
OSUbuntu 12.04.5 LTS
Plesk version12.0.18 Update #18, last updated at Oct 7, 2014 02:05 AM
The previous update of magicspam with version 1.0.6 worked fine. There were no changes to the system except the Plesk updates.
We purchased license for MagicSpam and now couldn't find anywhere installation for Centos 7...How to install?
View 2 Replies View RelatedHTTP Error (404)
[URL] ....
This is the error I get when trying to install wordpress
I have installed this several times on my server without issue and 24 hours after setting up one successfully I am no longer able to install any. Upon installation I keep getting this error message and to my knowledge nothing has been changed with the setup of the server.
Code:
Error: Installation of joomla at http://webaddress.co.uk/httpdocs failed. Non-zero exit status returned by script. Output stream: 'PHP Warning: fopen(/var/www/vhosts/webaddress.co.uk/httpdocs/httpdocs//configuration.php): failed to open stream: No such file or directory in /usr/local/psa/var/apspackages/apscataloggi4T1a.zip93a52a9b-e8bb-df/cache/scripts/file-util.php on line 15 '. Error stream: 'PHP Warning: fopen(/var/www/vhosts/webaddress.co.uk/httpdocs/httpdocs//configuration.php): failed to open stream: No such file or directory in /usr/local/psa/var/apspackages/apscataloggi4T1a.zip93a52a9b-e8bb-df/cache/scripts/file-util.php on line 15 '.
I'm facing a problems with my plesk 11.5.30 (latest update with CentOS 6.x).
One subscription can't switch between horde and round-cube. When they change to round-cube, it's still running Horde. To solve this problems, I tried remove Horde (everything's fine, successful) and install it again (error).
Can i install imagemagick on centos 6.5 with this commands?
ImageMagick:
[root@server ~]# yum install ImageMagick
[root@server ~]# yum install ImageMagick-devel
PHP-imagick:
[root@server ~]# yum install gcc (Please note: if it is already installed, then it will be updated if required)
[root@server ~]# yum install make automake
[root@server ~]# yum install php-pear
[root@server ~]# yum install php-devel
[root@server ~]# pecl install imagick
Now you will have to add the imagick extension in your PHP condifuration file:[root@server ~]# cd /etc/php.d/[root@server ~]# nano -w imagick.ini
Then you put following line in that file:extension = “imagick.so”..And save it with <CTRL> <O>After finishing this, you will have to restart Apache as follows: [root@server ~]# service httpd restart
I can't install or remove anything. when i click on continue it's just refreshes the page and come backs to the list.
I have checked error log and the latest error log is ERR [panel] Specified column "isAllowed1 is not in the row.
And i don't think this error related to the problem. When I click on continue it does not create any line in the error log.
When I try to install Magento 1.9.1.1 I get the error message;Error: Installation of magento at http://mydomain.com/ failed. Non-zero exit status returned by script.Can't seem to get any more information into what might be causing this issue...
View 2 Replies View RelatedIs it possible to install and run Plesk on Google App Engine? If so, could you point me to some appropriate documentation? If not, what about Google Compute Engine?
View 1 Replies View RelatedI just finished installing Plesk Panel 12. I seems like that everything is working as it should, except for FTP. I am not able to login with any FTP accounts.
View 13 Replies View RelatedI have server with the Plesk control panel on Linux server and want to install ffmpeg + MPlayer + LAME + FLVtool2 + MediaInfo + Mencoder + MP4Box + neroAacEnc , but not sure about the steps to install it. Is there any script or easy steps to install ffmpeg + MPlayer + LAME + FLVtool2 + MediaInfo + Mencoder + MP4Box + neroAacEnc on my server.
View 1 Replies View RelatedI have new Linux server with CentOS 6.6 on it. I have tried to install Plesk version 12.0.18 on it.
During installation process from http://autoinstall.plesk.com/plesk-installer shell script I'm getting error:
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:09:44 CST 2014
***** problem report *****
ERROR while trying to SMB database not created
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
STOP Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:10:01 CST 2014: PROBLEMS FOUND
START Bootstrapper 12.0.18 prep-install for BASE AT Fri Dec 5 19:15:46 CST 2014
When I have tried to run command:
# /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair
I'm getting errors:
---TRANSACTION 0 0, not started, process no 32603, OS thread id 139715979196160
MySQL thread id 38, query id 7054 localhost admin
SHOW ENGINE innodb status
--------
FILE I/O
--------
I/O thread 0 state: waiting for i/o request (insert buffer thread)
[Code] ....