Microsotft Virtual PC 2007 And Linux
Jul 2, 2007
I downloaded and installed this today thinking I'd build two VM sessions. one for CentOS and one for Ubuntu just to play around in.
But when I start a new session, choosing 'other' for the O/S, assigning plenty of RAM and hard drive space I still can't get to the setup.
Using the CentOS 5 iso I attempt to install. I get about 10 seconds into the load, and the system stops right after it sets the read only session on the kernel.
Using Ubuntu I can't even start. I choose to install text version, and i get two immediate CRC errors.
I've downloaded them both twice.
One other thing, I put my Vista disc in to test this (not an iso) and it ran fine.
Is it not possible to install linux from an ISO using this?
View 2 Replies
ADVERTISEMENT
Oct 24, 2009
does anyone have a fix for the Exchange 2007 kerberos issue when connecting Kayako to Exchange via pop3 or imap?
kayako says:
Quote:
The reason for the error you are getting is a bug in MS Exchange 2007. The exact reason is, Exchange server falsely advertises that it support Kerberos authentication even when it is configured not to use Kerberos. This causes the fetch request to fail from PHP as PHP-imap always tries to use Kerberos first.
The workaround to this issue is either to use a different mail server or compile PHP without Kerberos support(in that case it will simply ignore Exchange's erroneous behavior regarding Kerberos).
If possible you may setup a secondary mail server (Non exchange 2007) and forward the required emails there and configure help desk to fetch the emails from the secondary email server(non-exchange 2007) instead of your Exchange server 2007.
View 0 Replies
View Related
Jun 3, 2009
ive set up Exchange 2007 on WS2008. I have a domain "fasterfasterfaster.net"
its nameservers are changed correctly and is pointing to the right IP address including the @ and CNAME records.
the mx record is set to mail.fasterfasterfaster.net
my DC is called "faster.local"
in the org configuration > hub transport, I have accepted domains:
fasterfasterfaster.net Authoritative
mail.fasterfasterfaster.net Authoritative
faster.local Authoritative
also in the org config, there is an internet send connector. its FQDN is mail.fasterfasterfaster.net.
for the Server config > hub transport:
Client is enabled with the FQDN: mail.fasterfasterfaster.net and permission groups enabled:
Anonymous, exchange users, exchange servers and legacy exchange servers
the Default is enabled with its FQDN to machineName.faster.local and same permission groups as above.
problem is, I am unable to recieve any emails (no bouncebacks)
And when I send email from an exchange account, the recipient recieves it from account@faster.local
View 0 Replies
View Related
Feb 26, 2008
i am currently seeking exchange 2007 hosting. i need a host that accepts paypal? could any off you point me to some hosts.
i no web2mail offers it but is a bit expensive $15 a month.
View 4 Replies
View Related
Sep 13, 2007
Have been receiving the following warnings for more than a day. Does BFD auto execute a permanent ban or do I have to do it myself? If so, how? Also, I did a whois, found out the service provider, and sent an email regarding abuse. I have yet to receive a reply.
I was wondering since its a HK IP, do I have to send the message in chinese? Would anyone be kind enough to do so?
Quote:
Banned the following ip addresses on Thu Sep 13 16:32:01 SGT 2007
203.186.163.31 with 308 connections
View 6 Replies
View Related
Mar 30, 2009
I am trying to setup the trial of Exchange 2007, everything is installed. However, I am unable to connect to the SMTP server
Quote:
452 4.3.1 Insufficient system resources
Connection to host lost.
After googling around, I found the solution, I changed the settings xml file and now I have to restart the service but I can't seem to find the "Restart Service" option in the EXCHANGE MANAGEMENT CONSOLE?
Also, how secure is exchange by default - any guides/tips so I can secure this test environment?
Any 3rd party Anti-virus/worm/spam solutions for Exchange that are affordable instead of MS Forefront?
View 1 Replies
View Related
Jun 4, 2009
setting up a MS Exchange 2007 server for my office/part time employees and wondering how would i go about this?
How does mail automatically in my case get pushed to iphone, do i have to connect my exchange server with a phone provider or something?
View 5 Replies
View Related
Apr 16, 2008
My hosting with everity.com started at the end of November and beginning of December 2007 when I was having issues with Crucial web host and them blocking members on my site and a slow site as well I will not go back to Crucial for that reason and they more then doubled their prices.
Any way when I was having trouble with Crucial I looked into many hosts. I had a huge list only remember a few but now that I came back here am remembering a few more. A few off the top of my head are trexhost glad I did not go with them as they closed down, reliable site and ok hmm I forgot the rest but any way this review is about everity not other hosts. So one of the things that sold me on everity was the kindness shown to me when I was asking him questions. One of my questions was about semi dedicated as I was thinking that might be what I need. He had descriptions of it in 2 spots on his site and they were different so I asked him about that and if I remember right he said it starts at the lower one and you can get up to the higher one. But the thing he said that sold me was when he told me I probably would not need semi dedicated and would be fine on a shared. This shocked me as every other host I have talked to always tries to get me to buy the vps or semi dedicated.
So after he impressed me by saying that I got an account. He did a free site move and had to do it manually too as crucial disabled the back up feature. After every thing was moved he even made sure every thing worked on my site, some hosts only move you and do not make sure things work. He even joined my forum , the owner I mean.
Back in January I did have a minor issue where at midnight my site would not load. Opened a ticket about it and it was fixed in a timely manor I am unsure of what was doing it but glad its fixed.
There was an issue a week or so ago when my Arcade's tournament system was doing funky things and found it was from another site that had an open exploit that caused mine to go funny after that customer was contacted my issue was fixed.
A new issue one that happened today was with my gallery and it had stopped working do to mod_security being installed. When I contacted support he did offer to remove it but because it was added to prevent the above issue I told him just to leave it and I will re install the gallery. I do love the kindness he put forth in that ticket as well as all the rest.
Oh speaking of kindness in tickets I opened a ticket about being confused about his billing system as it was totally different then what I am used to but he explained it and even changed the wording on it to make it less confusing.
[url]
[url]- down right now do to the mod_security but am working on reinstalling it. just waiting for ftp to finish downloading the images.
View 7 Replies
View Related
Jan 24, 2007
I'm sure by now most of you have read the Web Server Optimization Guide by Shaw Networks. It came in handy for me when I was first starting out, I reduced my load & memory usage by tonnes. I thought I would make a new thread with an updated How-To.
Recommended Tools/Programs:
Putty - Free SSH Client - [url]
WinSCP - Free SFTP and SCP Client - [url]
MySQL Optimization:
BACKUP:
cp /etc/my.cnf /etc/my.cnf.backup
Use Pico (pico /etc/my.cnf) or Download via WinSCP for editing,
Delete everything that is currently in the file and add the following...
Code:
[mysqld]
port = 3306
socket = /var/lib/mysql/mysql.sock
skip-locking
skip-innodb
query_cache_limit=8M
query_cache_size=256M
query_cache_type=1
max_connections=500
max_user_connections=100
interactive_timeout=60
wait_timeout=60
connect_timeout=30
thread_cache_size=128
key_buffer=16M
join_buffer=1M
max_allowed_packet=16M
table_cache=1024
record_buffer=1M
sort_buffer_size=2M
read_buffer_size=2M
max_connect_errors=100
# Try number of CPU's*2 for thread_concurrency
thread_concurrency=2
myisam_sort_buffer_size=64M
#log-bin
server-id=1
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
To Save: CTRL-X
Restart Service: "service mysqld restart" or "service mysql restart" or "/etc/rc.d/init.d/mysql restart"
HTTP/APACHE Optimization:
BACKUP:
cp /usr/local/apache/conf/httpd.conf /usr/local/apache/conf/httpd.conf.backup
Use Pico (pico /usr/local/apache/conf/httpd.conf) or Download via WinSCP for editing,
Change the following settings in your httpd.conf...
Set "Timeout" value to "Timeout 60"
Set "KeepAlive" to "KeepAlive on"
Set "KeepAliveTimeout" to "KeepAliveTimeout 3"
Set "MinSpareServers" to "MinSpareServers 16"
Set "MaxSpareServers" to "MaxSpareServers 32"
Set "MaxRequestsPerChild" to "MaxRequestsPerChild 256"
Set "HostnameLookups" to "HostnameLookups Off"
Note:
These settings will not work under all server environments its recommended that you tweak around with the numbers until your web server is running 100% please read Apache documentation before changing any settings so you know what you are changing [url]
To Save: CTRL-X
Restart Service: "service httpd restart" or "/etc/rc.d/init.d/httpd restart"
Installing eAccelerator:
eAccelerator is a further development from mmcache PHP Accelerator & Encoder. It increases performance of PHP scripts by caching them in compiled state, so that the overhead of compiling is almost completely eliminated. [url]
If you run CPanel please visit [url] for an auto-installer which will do all the hard work for you.
Run the following in SSH.
Code:
cd /
mkdir ea
cd ea
wget [url]
bunzip2 eaccelerator-0.9.5.tar.bz2
tar -xvf eaccelerator-0.9.5.tar
cd eaccelerator-0.9.5
export PHP_PREFIX="/usr"
$PHP_PREFIX/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=$PHP_PREFIX/bin/php-config
make
make install
mkdir /phpcache
chmod 0777 /phpcache
Edit your PHP.INI file and at the bottom add...
Code:
To install as a ZEND extension:
zend_extension="/ea/eaccelerator-0.9.5/modules/eaccelerator.so"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/phpcache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
OR to install as a PHP extension:
extension="/ea/eaccelerator-0.9.5/modules/eaccelerator.so"
eaccelerator.shm_size="16"
eaccelerator.cache_dir="/phpcache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="0"
eaccelerator.shm_prune_period="0"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"
Restart Service: "service httpd restart" or "/etc/rc.d/init.d/httpd restart"
For a great tutorial on Optimizing host.conf & sysctl.conf visit..
http://www.eth0.us/node/104
Common SSH Commands visit..
[url]
How to block an IP using iptables visit..
[url]
View 14 Replies
View Related
Jul 31, 2008
Any recommendations for a company offering dedicated server rentals with Windows Server and Microsoft Exchange 2007?
View 2 Replies
View Related
Jan 12, 2009
i have a dedicated box with centos.. i wold like to install VmWare workstation and a virtual windows image in vmware program, and then i wold like to make remote desktop on windows image from vmware..
View 2 Replies
View Related
Dec 12, 2008
I am currently researching the options open to me for Virtualisation, the two main ones I have seen are Xen or KVM.
I mainly use CentOS (RHEL), but have read that the version of Xen with it is very old, broken and unstable. KVM isn't included in the kernel that ships with CentOS, as it is too old, apparently it was first featured in Kernel v2.6.20. There isn't likely to be an update till RHEL6, which is due for release first quarter of 2010. I can't wait over a year, so need to find another Distro for use as the Host OS/Hypervisor.
I have built a pretty powerful server, it has an Intel Xeon 3230 which has VT - so I might be better off using KVM over Xen. I am going to collocate this server, so realistically I can make this decision only once - as it would be a PITA to re-install a host Linux distro remotely.
I did a search on distrowatch for distros with the latest version of the kernel, and Slackware came up as being just one minor version behind the most current (v2.6.27.7).
Now this distro is very mature, so should be a fairly safe bet, but it is a 32bit version and can't host 64bit VMs. I have 8GB of ram so want to be able to use it all, and offer the choice of 32/64bit VMs. So that's that out of the window.
I have used Arch Linux on and off for a couple of years as a workstation OS, but because it is so bleeding edge, when pacman updates it can break itself. But I suppose if I just use it as the Host OS, and never let it update/reboot, then it won't break. It should be fairly lightweight and stable, as I will be installing the bare minimum packages. I have a management card, so if the server fails to boot, then I can still remote in to fix it.
If I do want to update the kernel, is it possible to update without rebooting? I think it is somehow... unless I can just reboot during an unused time at 3am or something.
As you can tell I am leaning towards KVM on Arch Linux (x86_64). Is this a good plan?
View 9 Replies
View Related
Jan 11, 2008
There is a strange problem with picking up and sending emails on Outlook 2007 which I have wasted hours on over the last week.
Whenever I try to pick up/send emails on domain names, I get a 800CCC0F error message. It says: "reported error (0x800CCC0F): 'The connection to the server was interrupted. If the problem continues, contact your server adminstrator or Internet Service Provider (ISP)'"
I have gone through all the steps here [url]and here [url]and on another websites.
I have been setting up email addresses on Outlook for several years, so know how they should be done.
The strange thing is the email addresses of domain names hosted elsewhere work perfectly. But both new and existing Clook-hosted email addresses are producing this error message.
I believe it may be an error with the software for two reasons:
1. The email addresses work perfectly when I open Outlook in Safe Mode.
2. Our web host's staff have not been able to find anything wrong and the email addresses work when they try to set them up on their computers.
Any idea why our email addresses may not be working and how I can fix this please?
I have tried System Restore and Repairing the program on my computer's Control Panel.
View 1 Replies
View Related
May 25, 2007
Code:
[Wed May 23 15:58:24 2007] [error] [client ::1] File does not exist: /htdocs
[Wed May 23 15:58:25 2007] [error] [client ::1] File does not exist: /htdocs
[Wed May 23 15:58:26 2007] [error] [client ::1] File does not exist: /htdocs
[Wed May 23 15:58:27 2007] [error] [client ::1] File does not exist: /htdocs
I'm getting a TON of these in my Apache Error log. Is this just bots? Any way to stop them?
View 3 Replies
View Related
Feb 13, 2015
I installed a new certificate, made it default, assigned it to the shared ip address and made the plesk panel use it.
The problem is we have 200 virtual hosts using the old certificate. Is there a way to reconfigure all those domains easily.
View 13 Replies
View Related
Dec 21, 2008
What is the best linux version to run a vpn server over vps?
I'm a bit confused ,what's the best linux version if i want to have a vpn server ? Does Centos 5 work?
View 10 Replies
View Related
Apr 1, 2015
I want to update CentOS from:
Code:
Version Parallels Plesk v12.0.18_build1200140606.15 os_CentOS 6
OS CentOS 6.6 (Final)
to CentOS 7.
What steps I need to do to install CentOS 7?
View 4 Replies
View Related
May 21, 2015
I run a virtual server (Ubuntu 12.04, Plesk 12, Postfix 2.9.6) using plesk to manage multiple domains. The server address is server.domain1.com. I use plesk to also manage domain1.com regarding all services, including DNS and mail.
What I just found is that postfix sometimes issues the following warning:
server postfix/trivial-rewrite[7397]: warning: do not list domain server.domain1.com in BOTH mydestination and virtual_alias_domains
The essential part of my main.cf is:
myhostname = server.domain1.com
mydestination = localhost.$mydomain, localhost.localdomain, localhost
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
virtual_transport = plesk_virtual
And /var/spool/postfix/plesk/virtual_domains contains amongst others:
domain1.com domain1.com/
I do not have any issues with receiving or sending e-mails right now, but would like to get rid of the error message however.
Could it be the problem that postfix automatically sets mydomain to $myhostname with skipping the first part (i.e., mydomain is implicitly set to domain1.com)? Should I manually set mydomain to server.domain1.com instead? Any other recommendations? Since mydomain seems to be used in multiple options [URL] ..., I wonder what I might destroy with changing this? As all mail services run without any further troubles at the moment, I don't want to break this...
As I assume that quite some people use a plesk-based server to manage the domain to which the server itself belongs to, I would assume that there should be a general fix/check to updated mydomain accordingly?
View 3 Replies
View Related
Sep 11, 2014
We need to upload to a virtual server (managed with Plesk 11.5) a Wordpress site developed locally. We made this operations without problems many times on other hostings managed with custom panels, non-Plesk.
On the virtual server with Plesk, however, once the files are uploaded via FTP, the database via phpMyAdmin and updated the Wordpress configuration file, when you go to visit the website, it does not display anything and the browser opens the download window for a text file called "download" that contains the code of the file index.php of WordPress.
View 7 Replies
View Related
Mar 29, 2009
Attached is a (badly) drawn diagram of two sites, connected by a vpn.
The site to the left, is network 10.0.0.0/24 which runs a linux server as the router for the network.
The site to the right, is network 10.1.0.0/24 which runs a windows 2003 server as the router for the network.
Now, my problem is, the clients behind the windows 2003 server can ping any machine on the first network because i setup a static route to route all traffic to 10.0.0.0/24 over the vpn interface.
now, my problem is, only the linux server can ping any machine on the windows 2003 network, any client behind the linux server cant seem to route over the interface.
I have the following route on the linux server: .....
View 0 Replies
View Related
Mar 20, 2007
I've recently had a number of enquiries from hosted clients and potential customers requesting SharePoint hosting for use in connection with their current packages. I've used Windows SharePoint Services 2.0 in the past, but am specifically looking into the latest and greatest release of SharePoint to date to install - SharePoint Server 2007.
I've read over Microsoft's server requirements for running SharePoint, who recommend a 3GHz or higher processor and 2GB RAM for web servers, and 4GB RAM for SQL servers. To me, this seems ridiculous for the small number of clients I'll ever be hosting, and who will only have a small number of SharePoint users per site.
Those with any experience of SharePoint hosting please share your opinions of SharePoint hosting on various server configurations, as I'm interested to know how it performs. As I'll only have a small user base, would running SharePoint fully on one existing IIS 6 web server do the trick? What processor should this machine have, and amount of RAM to run SharePoint well?
View 0 Replies
View Related
Oct 9, 2008
I would like to understand what is the difference between VPS and a VDS. I understand they sound the same, however from a cost stand point VPS is way cheaper than VDS, and I am not very sure of the reason.
View 14 Replies
View Related
Aug 12, 2007
i try to install a vpn server on my vps ...
View 6 Replies
View Related
Apr 19, 2009
After months struggling with an IP PBX of our own, we've decided to sell it and get a Virtual PBX.
View 5 Replies
View Related
Jun 6, 2008
I have a server, with KVM over IP but without virtual media.
It would be nice if i can install the OS from a usb stick but i have some requirements:
It has to be some sort of net install since i cannot update the USB stick in the future, but it has to install each time the newest OS version.
It also would be very nice if i can choose between different OS’es
for example:
[1] Newest CentOS version
[2] Newest Fedora version
[3] Newest Debian version
Etc, i am still learning, so it would be helpful for me to learn different distributions.
View 4 Replies
View Related
Dec 15, 2008
What is virtual host?
View 4 Replies
View Related
Oct 15, 2007
Can I install say, VMWare on a VPS and use it the same way as if it were installed on an OS running on the physical hardware?
View 9 Replies
View Related
Mar 11, 2007
How may i create virtual ssl?
for example will that you install plesk,all site support of https or ssl
or por 2083 for cpanel
I want create one virtual ssl that was only https for self
my site is robo4u.com(example)
I lesson that we can with openssl but how may?
Config? setting? or ...
View 1 Replies
View Related
May 2, 2007
I have a few hundred domains that I would like to set as "parked" domains on my server, so basically all domains will point to the same http folder (or the same index.php file). I'm using apache, would this be a matter of setting up virtual hosts?
View 2 Replies
View Related
