Linux Console Program For Hardware Monitoring

Nov 3, 2007

Anybody knows a good console app. for monitoring hardware as CPU temperature etc.?

Motherboard Monitoring Program - Which One Is Better

Oct 30, 2007

From your personal experience which one should I choose for FEDORA 6 ?

1. lmsensors [url]
2. healthd [url]
3. hwsensors [url]
4. mbmon [url]
5. mbm5 [url]

View 2 Replies View Related

Linux Remote Console

May 31, 2008

I am upgrading my current colo'd server from a 1U dual core xeon with 2x500GB drives to a 2U core 2 quad with 8x750GB drives (raid5).So far I have ran into two issues. One is the rails are too large for the cabinets (problem #1 which I put in another thread). The only other problem is I am having problems with remote console on the new hardware.

It should be setup correctly since I basically rsync'd everything from the old server to the new one. The device is detected:

root@houkouonchi: 03:19 AM :~# dmesg | grep -i tty
Command line: root=/dev/sda2 gpt pci=nomsi console=tty0 console=ttyS0,9600 notsc
Kernel command line: root=/dev/sda2 gpt pci=nomsi console=tty0 console=ttyS0,9600 notsc
console [tty0] enabled
console [ttyS0] enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

But when I connect to the digi I am not getting any console output. I have tried a different serial -> Ethernet adapter and tried a different patch cable/port on the digi so I am pretty sure those are fine. The motherboard (nforce 650i chipset) didn't have an onboard serial port so I am using a port hooked up to a bracket which has a ribbon cable which connects to the motherboards COM port. I also tested another serial connector which the case has built in and both give me problems.

Maybe the motherboard is just busted?

View 2 Replies View Related

Plesk 12.x / Linux :: DRWeb Logging To Console

Mar 25, 2015

Since some days I have the strange issue that all logings from DrWeb is shown directly into the console. For example if I connect to my Server via SSH and then I sned an email to my email accoutn I see the logging of the spool.

root@************:~# 2015 Mar 25 16:44:57 * 127.0.0.1 [13727] /var/spool/drweb/spool/drweb.tmp.tWcneM - archive MAIL
2015 Mar 25 16:44:57 * 127.0.0.1 [13727] >/var/spool/drweb/spool/drweb.tmp.tWcneM/3.part - Ok
2015 Mar 25 16:44:57 * 127.0.0.1 [13727] >/var/spool/drweb/spool/drweb.tmp.tWcneM/4.part - Ok
2015 Mar 25 16:44:57 * 127.0.0.1 [13727] >/var/spool/drweb/spool/drweb.tmp.tWcneM/5.reexport - Ok
2015 Mar 25 16:44:57 * 127.0.0.1 [13727] /var/spool/drweb/spool/drweb.tmp.tWcneM - Ok

this happens in my root shell. if I disable the Email check then this will not happen anymore. another strange issue is that if I restart drweb and I have more than 1 ssh shell open I see the output of the restart on all shells, this issue is only for drweb not for any other service. How to config drweb to log only into logfile not to the console?

I search the web and the only thing I can find was

[URL]

In the FreeBSD operating system, syslog service can intercept information output by Dr.Web Daemon to the console. In this case, the information is logged character-by-character. That occurs when the logging level is set to *.info in the syslog configuration file (syslog.conf).

View 13 Replies View Related

Plesk 12.x / Linux :: Cron Job Working On Console But Not Automatic In Task Manager

Aug 19, 2014

i have setup fresh Centos 6.5 with Plesk Pannel 12.0.18. When i execute the attached command from the console, i get it work, some posts are auto created within wordpress. When i enter the attached command within Plesk (Tools / Settings - Taskmanager - root New Task, the command is not executed...

/usr/bin/wget --post-data='id=4&minposts=1&maxposts=3' -O /dev/null http://www.mydomain.com/wp/wp-content/plugins/WPRobot3/cron.php?code=UNIQUEID

I tried also without /usr/bin at the beginning, but its not working with cron automatic

View 3 Replies View Related

Plesk 12.x / Linux :: Anti-virus Program That Can Be Installed On Version 12.0.18 As Extension Or Component?

Jan 14, 2015

"What anti-virus do you use on your postfix email server powered by Plesk?".Is there an anti-virus program that can be installed on Plesk version 12.0.18 as an extension or component? I need it primarily for protection of incoming email from malware.I've seen in Add or Remove Components in the Mail hosting features that I have installed Kaspersky antivirus, but I didn't seen anywhere that it actually can be configured from within Plesk. It also, as far as I can see, doesn't do anything. what is Kaspersky antivirus used for in Plesk and how can I configure it?

View 2 Replies View Related

Windows/Linux Server Hardware Monitoring

Jul 13, 2009

Are there and decent tools that you use to keep an "eye" on your server to lookout for hardware issues?

E.g., it would be nice to get an automated email sent if a server's temperature went above X or if S.M.A.R.T. errors were detected with a hardrive, etc.

View 8 Replies View Related

Monitoring Software To Monitor All My Linux VPS/Servers

Jul 8, 2008

I searched but I haven't found anything. I need a server/client software to monitor all my Linux VPS/Servers. Do you know anything easy to use and install. I want to have a main server that verifys all the others.

View 7 Replies View Related

Intel SR2500LX Chassis: Monitoring RAID Under Linux

Apr 23, 2008

I have bought an Intel SR2500LX server chassis with a S5000PAL mainboard running Centos. This system has an active backplane with a LSI MegaRaid chipset.

I'd like to be notified in the case of a drive failure but I'm totally stumped on how to get any monitoring working.

The only raid managment utility Intel supplies is a Java based monstrosity, which needs X-Windows to run and needs to be run continuously in order for the email notification to work.

Web based management can only be used from the same subnet as the server, so that's not very useful either.

I've contacted Intel support which gave me the advice to reboot the server and use the Bios utility if I want to check the Raid arrays consistency . Needless to say I'm very dissapointed, this server has every redundancy feature you can think of but it seems impossible to monitor the Raid under Linux.

Does anybody have experience with the Chassis and Raid monitoring under Linux?

View 7 Replies View Related

Plesk 12.x / Linux :: Server Monitoring Tool For Parallels

Feb 20, 2015

I'm asking if there is a server monitoring tool that has easy install steps for Parallels Plesk 12.0.18 Upd #36 or any guide since my server is running slow and I need to collect some data in order to fix the issue.

I've tried Munin on my own but got this error during install process:

Transaction Check Error:

file /usr/share/man/man3/XML::SAX::Base.3pm.gz conflicts between attempted installs of perl-XML-SAX-0.96-7.el6.noarch and perl-XML-SAX-Base-1.04-1.el6.rf.noarch
file /usr/share/man/man3/XML::SAX::Exception.3pm.gz conflicts between attempted installs of perl-XML-SAX-0.96-7.el6.noarch and perl-XML-SAX-Base-1.04-1.el6.rf.noarch

I'm running CentOS 6.6.

View 9 Replies View Related

Real Time Remote Linux Hardware Monitoring Script/App

Feb 27, 2008

I have an AMD Sempron(tm) Processor 3000+ machine thats running Linux - CentOS.

I was wondering if anyone could recommend a good server/hardware monitoring script or app that will allow monitoring of the following items in real time. Also I'd like to
log and view the historical data. A script that stores this data in mysql database would be ideal.

Processor Temperature
Hard Drive(s) Temperature
Ram Usage - Overall
Ram Usage for each running Process/Service
CPU Usage - Overall
CPU Usage for each running Process/Service

View 10 Replies View Related

Console Port

Jul 20, 2009

I've noticed on some rackmount servers and firewall appliances there are ports labelled console, and look like serial ports. Are these related to connecting to KVM? I am looking for a cheap appliance for some rackmount servers I have (1U half depth would be ideal), to remotely recover the server if it goes down. I figured they'd connect through PS2 connectors, but then I thought that if the console port was related, then going through that might have the option for power cycling or something.

View 7 Replies View Related

Xen/Heron/Console

Aug 8, 2008

I'm trying to knock a bug out of our new Hardy Heron Xen template. Basically when the old ones boot up /bin/sh is spawned on the console. Now with Hardy init has been replace with /etc/event.d handling.

So I've replace /etc/event.d/ttyS0 and ttyS1 (not sure which one is the console but I think ttyS0)

Code:
# tty0 - shell

# This service maintains a getty on tty1 from the point the system is
# started until it is shut down again.

start on stopped rc2
start on stopped rc3
start on stopped rc4
start on stopped rc5

stop on runlevel 0
stop on runlevel 1
stop on runlevel 6

exec /bin/bash
respawn

View 5 Replies View Related

Web Based SSH Console

Jun 15, 2008

Is there a good one around on the internet?

HyperVM has a nice one.

View 5 Replies View Related

Ever Seen An Attack From The Console

Aug 29, 2007

Terrible

[url]

View 8 Replies View Related

Errors In Command Console

Dec 8, 2008

I see following error in comand console.

I know its firewall log, but how can disable show firewall logs in command console?
See: [url]

View 4 Replies View Related

Change Hypervm Console

Jun 17, 2008

How can change hypervm console user for a vps?

For example how can change persianwhoisvm@72.xxx.xxx.xx to microvm@72.xxx.xxx.xx

View 1 Replies View Related

ProCurve 2626 Console Access

Jan 21, 2008

What type of cable/settings are needed to access the console port of a ProCurve 2626 J4900A? the recent one I ordered wasnt working with the regular way I access these switches.

I use a null modem (crossover) female-female serial console cable and connect it to my laptop serial port w/9600-8-1-None to access my ProCurve 2900 48G series.

But I tried using a straight/null/rollover(cisco's) and none of them worked. I also tried 9800-8-1-xoff/xon. All of them are giving me weird text when I press [ENTER] numerous times. I can access my 2900 series switches fine, no problem, just these 2626 ones I cant. My laptop can definitely detect the port cause when I disable it, I get a message on my terminal window which says "disconnected". So I am messing up somewhere.

By the way, I actually returned the switch when it came the first time because I thought they gave me a faulty one and I got another one, but it behaves the same way. But the actual switch functionality has no issues as I can assign my servers IPs and be able to access them remotely. I just cant configure the switch itself without the console port.

View 5 Replies View Related

Text Console Not Working -- Supermicro IPMI

Apr 9, 2008

I have a SuperMicro server with AOC-SIM1U.

I was able to login from IPMI View just fine, and everything works as expected except
"Text Console ". I was able to hit the start button and get the black screen on IPMI View, but that was just about it.

Only a cursor blinking without texts.

Is there something else that I should do in order to get text console working? I've tried all baud rates.

View 5 Replies View Related

Console Cable Pin Out For Extreme Networks Stuff

Jun 16, 2008

if anybody know the cable pin out on making a console cable using those serial adapters?

View 1 Replies View Related

Windows 2003 Server - IIS & FTP Up, But No RDP Or Physical Console

Jun 2, 2008

We have a windows 2003 machine that is currently responding properly to all services that it's running (including IIS and FTP), however RDP connections just close right away and the server isn't responding when a local keyboard & monitor is plugged in.

The last thing that I want to do is pull the power out while it's on - any ideas?

I tried a remote shutdown, but the response is:
C:Users>shutdown /r /m HOSTNAME
HOSTNAME: The entered computer name is not valid or remote shutdown is not supported on the target computer. Check the name and then try again or contact your system administrator.(53)

View 7 Replies View Related

Out Of Band Connectivity- IPMI- Serial Console- KVM Over IP

Sep 23, 2008

When you can't access your server via SSH or Remote Desktop, what do you use to fix the problem without filing a ticket?

IPMI?
Serial console?
KVM over IP?
Dial up connection?
Backup network connection?
Get up and walk to the server? :-)

If you had a choice between them, what did you pick and why?

Does your dedicated server provider give it to you for free, or do you have to pay extra for it?

View 7 Replies View Related

Importing Data From Oracle Enterprise Manager Console

Jun 12, 2007

how can I import a database dump from the Oracle Enterprise Manager 10g console? The Oracle is running on a Red Hat Linux Server.

View 0 Replies View Related

Your FTP Program?

Apr 29, 2008

What ftp program do you use?

I use FileZilla

View 24 Replies View Related

How To Program In Shell ?

Oct 11, 2006

I'm trying to program a very simple shell script that does 2-3 things.

1) checks for the number of a script running say, "ps aux | grep php | wc -l" returns that number.

2) deletes temp files folders "cd /to/that/directory/; rm -fr *&" every 90 seconds IF that number in check #1 is below say 50....

and then have this shell script launched in shell every so often, not sure on the frequency but first is how to program in shell is a TIME DELAY....

View 7 Replies View Related