Leaseweb Network Speed Slow
Nov 3, 2009
My new server is on a 100 Mbps port.
Doing a wget [url]
gives me only 6.63 MBps.
Doing a wget [url]
gives me 1.17 MBps.
The folks at leaseweb say it could be due to a network maintenance that they are performing and should be sorted tomorrow. No problem with that.
However, I just wanted to know if anyone else with a leaseweb server is experiencing the same problem now.
What is the speed you are getting?
On the positive side, leaseweb support replies have been fast and to the point. I like it so far.
View 14 Replies
ADVERTISEMENT
Mar 5, 2008
I have a server with a overheating problem and a network problem.
(With a lot of users connecting to it every second)
Well, recently the server started to get slow then finally it was up on KVM but network connections do not work.
After reboot, it works for around 10+ hours but it won't last for a day as it gets slower then unconnectable.
When I look at the logs, I see this:
Mar 5 00:38:35 cn1 kernel: printk: 769 messages suppressed.
Mar 5 00:38:36 cn1 kernel: dst cache overflow
Mar 5 00:38:39 cn1 kernel: CPU0: Temperature above threshold
Mar 5 00:38:39 cn1 kernel: CPU1: Temperature above threshold
Mar 5 00:38:39 cn1 kernel: CPU1: Running in modulated clock mode
Mar 5 00:38:39 cn1 kernel: CPU0: Running in modulated clock mode
Mar 5 00:38:41 cn1 kernel: printk: 709 messages suppressed....
View 2 Replies
View Related
Jun 3, 2008
since 2 month i have a linux gold webspace package from the hoster leaseweb.
The speed of my webspace is very slowly from time to time.
Are the server from leaseweb faster?
View 4 Replies
View Related
Oct 27, 2008
Leaseweb very very slow?
just me?
2 dedis... and both with problems... anyone?
View 2 Replies
View Related
May 30, 2008
I think that most of us know that very big no. of warez links sites keep sites at LeaseWeb network.
Is that mean that LeaseWeb allow warez links?
I contacted thaem, but they say NO, we do not allow any kind of warez. Not true how I can see...
View 2 Replies
View Related
Dec 1, 2008
I am trying to found out is there anybody else having network problems on lease web or on eurovps.
I am on eurovps and from time to time I have a network problem.
I try to do tracert which never completes, and also try to use services like host-tracker to check visibility of the site and usually it is not visible from some locations.
I see that same thing was mentioned before and hmm interesting on the same starting ip
webhostingtalk . com/showthread.php?t=714871
I just moved to eurovps so I am interested in your network status etc...
1 1 ms 1 ms 1 ms IP xxx.xxx.xxx.xxx
2 6 ms 8 ms 7 ms IP xxx.xxx.xxx.xxx
3 7 ms 9 ms 7 ms IP xxx.xxx.xxx.xxx
4 10 ms 18 ms 9 ms IP xxx.xxx.xxx.xxx
5 19 ms 25 ms 20 ms IP xxx.xxx.xxx.xxx
6 * 10 ms 13 ms IP xxx.xxx.xxx.xxx
7 19 ms 22 ms 19 ms IP xxx.xxx.xxx.xxx
8 11 ms 14 ms 19 ms 212.200.17.8
9 22 ms 11 ms 12 ms 212.200.232.89
10 12 ms 11 ms 27 ms 212.200.227.226
11 57 ms 46 ms 44 ms ge-1-1.decix.tcy.fra.de.leaseweb.net [80.81.192.
246]
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
View 14 Replies
View Related
Feb 6, 2007
resolving speed on my server is slow (about to 30 seconds), what do you think about this problem.
View 9 Replies
View Related
Jun 19, 2007
here is the deal my speed tests are all saying 1500 down/1000 up
but im getting really slow browsing and occassionally the "web page not found" error.
no, i dont have spyware or anything, i just changed ISPs so i know it is some kind of setting... which one
View 2 Replies
View Related
Nov 7, 2007
we have 9 rack each rack have 2 cisco switch 2950(1 for internet and 1 for private network) if we try to do a transfer files between two server we can't go over 1mbps, the same if we move the file from the web, every server nic is set to 100mbps the same for swith port, why we get a so slow speed?
View 7 Replies
View Related
Jan 20, 2007
I have mounted NFS part. but when copying a big file the speed is OK like 5-6MB/s but when starting to copying all other (small files) speed is like 20-200KB.s What is the reason and is it way to improve the speed or use other way to mount drive remotely and preserve the same permissions after backup?
View 2 Replies
View Related
Nov 5, 2007
I moved from shared host to VPS a few days back. Since the move, the site becomes slow during particular time of the day. It appeared to be an issue of cron run by their another client and after promising that they would move that client to another node (I have spent more than 25 days to follow up on this till now) they backed off from their words but informed me about an alternative. Now, they say that the cron of that client was executing many scripts and they have spaced those scripts.
I am looking for a long-term host and was wondering:
1. VPS provides a minimum guaranteed stuff so what is the use of that guarantee if one client can make the server crawl (imagine 5 minutes or more to open a site).
2. Can a host be trusted who does not honour words.
View 14 Replies
View Related
May 25, 2009
I have Dedicated Server and create vps via VMWARE
how i can
limit network speed
each virtual machine ?
View 3 Replies
View Related
Jul 17, 2008
I would like to ask you all to download this 10MB file from one of my servers and then post here the download speed.
Server's in London, UK.
[url]
----
This is from one server I have in Frankfurt, Germany:
100%[=======================================>] 10,240,000 4.15M/s in 2.4s
View 14 Replies
View Related
Jul 28, 2008
I have just gotten a new server and the ping results were pretty fine. However, when it comes to the download speed its horrible. What could be the issue?
View 10 Replies
View Related
Jun 1, 2008
Hi got an image server with volumedrive but very disappointed about the speeds.
I ordered a 100mbps.
In Lighttpd server-status it cannot go more then 1.10 Mbyte/s...
but at PacificRack the same amount of traffic easily does 2.5Mbyte/s and in past has done 4Mbytes/s not even sweating.
Am I on 10mbps or 100mbps?
I ran mii-tool and it says eth0: negotiated 100baseTx-FD, link ok
I haven't even used my server at all for a few minutes because everytime I want to use it the connection is too slow that I need to change back to PacificRack.
View 12 Replies
View Related
Feb 29, 2008
Can someone throw light, on how to check my Server's network speed?
I have uploaded a 200 MB dump and getting this result :
Quote:
# wget ******/dump.doc
HTTP request sent, awaiting response... 200 OK
Length: 231,816,431 [application/msword]
2% [> ]
4,984,776 1.15M/s ETA 03:22
1) How is this Dedicated Box, speed considered?
2) Any other way to test network speed?
View 3 Replies
View Related
Oct 13, 2009
I'm on a NetDepot 10 meg unmetered and just started migrating some accounts over from The Planet. I've been with them since... well the beginning. I wanted something a little less expensive with more bang for buck.
While the uptime has been good. The network speeds have not. I'm never getting more than sustained transfer speeds (scp, rsync) from my Planet server of 400KB/s... at this rate it's going to take 6 hours to transfer an account that's just 8 gigs in size.
NIC is set to 100 meg, full duplex. Both servers have just about no activity on them and firewalls clear.
3% 323MB 378.9KB/s 6:02:15 ETA
Is anyone else finding the network speeds with NetDepot sluggish? I submitted a support ticket about this.
This makes things like remote backups impossible.. hopefully it's just a issue with an overused switch or something. The worst part is I did the full buy-down package in hopes of being with them long term, now I'm not so sure.
View 10 Replies
View Related
Jun 22, 2009
problem with my server running CentOS 5.3.
I noticed that there are huge pings to my server from time to time, example:
------------------
64 bytes from HOSTNAME (server-IP): icmp_seq=0 ttl=60 time=2.93 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=1 ttl=60 time=2.70 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=2 ttl=60 time=1901 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=3 ttl=60 time=899 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=5 ttl=60 time=2.69 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=6 ttl=60 time=2.62 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=4 ttl=60 time=2132 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=8 ttl=60 time=2.57 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=7 ttl=60 time=1190 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=10 ttl=60 time=2.65 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=9 ttl=60 time=1048 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=12 ttl=60 time=2.74 ms
64 bytes from HOSTNAME (server-IP): icmp_seq=11 ttl=60 time=1205 ms
------------------
First I thought that it is network related, but most strange for me was that I did not have any packets lose.
Then I tried to ping from my server to other hosts - situation was the same - some ping were good and some were huge (700ms, 800ms, even 2000ms)
I checked:
cat /proc/sys/net/ipv4/netfilter/ip_conntrack_max
and it was 65536
Then I checked:
cat /proc/sys/net/ipv4/netfilter/ip_conntrack_count
and it was ~1600 so normal.
dmesg was showing such errors:
conntrack_ftp: partial 227 3331059707+13
Then I checked ifconfig, here is the output:
------------------
eth0 Link encap:Ethernet HWaddr 00:24:21:57:2B:6F
inet addr:MAIN=IP Bcast:BCAST=IP Mask:255.255.255.192
inet6 addr: fe80::224:21ff:fe57:2b6f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:170557113 errors:0 dropped:2421127049 overruns:0 frame:0
TX packets:182047660 errors:0 dropped:46 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2756835074 (2.5 GiB) TX bytes:79640621 (75.9 MiB)
Interrupt:82 Base address:0xe000
------------------
Strange for me was:
RX packets [...] dropped:2421127049
TX packets [...] dropped:46
I did not have such dropped information on all my other servers. Dropped counter for RX was constatnly increasing.
So I decided to restart all services on the server. After restarting network and ipaliases - problem disappeared. RX dropped counter is still rising, but I do not have any slowdowns on the server and pings are normal.
My question is - does anyone could have any idea what can casue my problem and how can I prevent this in the future?
View 5 Replies
View Related
Dec 16, 2008
FDC servers network slow?
Anyone having problems with sites hosted on FDC right now?
View 2 Replies
View Related
Sep 24, 2007
I am copying 6 GB of data to a machine across a 100baseTX (full-duplex) link. There are no collisions on the network, yet scp and systat -ifstat are both reporting extreamily slow transfer speeds... around 400 KB/s. That cant be! What what can I do to fix this?
I'm running FreeBSD 6.2. What other stats should I be looking at to figure this out?
why I am not getting at least 9 MB / sec, let alone 12?
View 10 Replies
View Related
Jun 15, 2008
I have a server in Liquidweb with 50GB of web pages and I want to move this accounts to my servers in Europe. The problem is that speed is about 4Mbps and becomes impossible to move the accounts.
With my other servers in GNAX I have not had trouble getting speeds of 80/100Mbps.
I tried to move my server of Liquidweb to GNAX but has reached only 14Mbps.
Which is the best solution? The network liquidweb has always been very stable, but I am seeing that is really slow.
View 4 Replies
View Related
May 23, 2008
We've got a discounted Quad dedi box from Ecatel.net about a week ago. Their network and prices are really good, sure. But we still have problems with start up because the second hdd isn't mounted or installed properly. The support team has answers about 1-2 times per day only so this question is in progress already for days.. The helpdesk is locked somehow from todays morning (I see our account is present but there's no way to log in) and we are still waiting for replys from day-before-yesterday requests...
I wouldn't like to be some kind of sharp under any circumstances and I respect every business but this is probably too long so we have to pay now just for waiting to get a server ready with no start yet.
Does somebody work with them? Is it normal situation? We still have some boxes in Layeredtech and would like to move to European DC (these boxes are middle-ended so we need more power now). There were no such problems in LT. Never. The maximum response time to such kind of questions was 2-5 hours (15 minutes in general), maybe a bit more (for hardware setup requests), but not days and nights with no progress indicator.
Maybe that is a European DC highlight strategy to have such delays with tickets response, isn't it? Coz the European market is new for us, anyway, we've never had boxes there before but would like to.
View 14 Replies
View Related
Nov 11, 2008
I've got 25 domains on a Virtuozzo/Plesk8.6/CentOS5 VPS. Each domain has one up-to-date install of WordPress, most have very little traffic (average 200mb per month), maybe 2 domains get 5-7gb traffic per month.
I monitor port 80 connections and rarely see more than 10 at a time.
That should in my opinion be no problem at all for a VPS with 768mb guaranteed ram and 2.4ghz cpu. I've got 30gb hard drive spare too.
But.... about 8 or 10 times a day it grinds to a complete halt: server load at 500-1000%, sites timing out, plesk takes 3mins to load, often I can't even connect with SSH, and the plesk web server, apache
INSERT INTO module_watchdog_sys_stat (time, type, value, service_id) VALUES(FROM_UNIXTIME(1226404705), 'MAINMEM_USAGE', 17472, 11);
80 seconds sounds like a huge amount of time for a MySQL insert to me! Does anyone know if this is likely to be the cause of my trouble? Some problem with Plesk and the database? Or could it be something else?
View 3 Replies
View Related
Sep 14, 2007
I am having some serious speed issues with my 1Gbit server at FDC. After opening a ticket, they've simply dismissed it as a server configuration problem. However I am convinced it isn't because certain ISP's (usually universities) get good speeds, usually 700kb/sec but the vast majority of my users get between 20-50 kb/sec and it's causing a lot of complaints.
Furthermore I have other servers with FDC which are 100mbit which perform better than my 1 Gbit one. There are no server bottlenecks (CPU/RAM/HDD), since I've closely monitored them (PRTG) and they aren't even heavily utilised. So the problem is with the network at some point.
Speed Test : [url]
where abouts you are downloading from, your ISP and net connection. Wget's from servers are also welcome as are traceroutes.
View 14 Replies
View Related
Oct 14, 2009
any experiences to report about purchasing used / refurb gear from either Network Liquidators (nweq.com) or Network Hardware (networkhardware.com)?
View 12 Replies
View Related
Apr 25, 2009
I recently ordered a HP ProLiant DL180 with LeaseWeb. During pre-sales communication on April 3rd I was told that the KVM card that comes with DL180 is buggy and I won't be able to use it until HP fixes it. Considering the "strategic partnership" between LeaseWeb and HP, I thought they'd fix the problem quickly, so I went ahead and ordered the server anyway. Now it's been 3 weeks and still no word on the fix. Anyone else with a DL180 in the same situation?
View 12 Replies
View Related
Apr 23, 2009
I want to share my history/review with leaseweb.com..
I needed a quick setup server for a Windows Media Services service, I have several servers at softlayer.com but I decided to test one of the most famous European providers leaseweb.com .
So I talked with their sales and told that I need a 24 hour setup server, I wanted only that. So the sales quickly make pay for 6 months of an express windows server. No problem until now.
24 hours later I contacted their sales, and they said that my server would be provider today or maybe tomorrow (48 hours later!)
1 day later I contacted leaseweb and they said that they didn't have any stock of hardware to make the server.
2 days after the order on this day morning I contacted their sales and setup team again and they said to me that my server would be delivered before the end of the day.
At the end of that day I contacted their sales and setup team AGAIN and they said to me that they don't have stock of windows 2008 or windows 2003 standard (? WTF ?), I talked with them for more than half an hour.
They wanted to give me for the delay a cheaper server with a windows server 2003 WEB. WHAT? A windows that don't even support windows media services and a cheaper server for their mistake?
I asked if I waited one more time if they would be able to setup any server with windows 2008 or windows 2003 standard, the answer was "we don't know"..
So let’s resume, leaseweb only works from 9am to 5.30pm European time, they can spend 4 days without hardware or windows stock ( how is that possible ) and they want to apologize with a cheaper server with a cheaper windows...
....
So to any of you that have servers at leasewed.com , what will happen to you when some part of your server stop working?? You will have to wait more than 4 days for hardware stock, some days because of your windows licenses and some more weeks for support??
....
I would recommend anyone to pay more for a good company, not this companies that only can support your server 5 days a week for some hours a day.
I have asked for a refund at leaseweb.com let’s see if that refund comes or not, maybe in 6 weeks?
View 8 Replies
View Related
Nov 13, 2008
A thread titled "Leaseweb.com is very very bad!" has been closed recently "by request".
Don't know what it means. Kind of censorship?
Whatever, I'm going to tell you how they are good at Leaseweb:
They have no dectection of duplicated IPs, so they let you configure an IP belonging to somebody else on your interfaces.
If, evently, the problem is detected (somebody else complaining), instead of pulling the plug, they send you a mail, kindly asking you to remove the offending IP.
So they are very good at Leaseweb. They forgive your errors and let you experiment with the network.
And what about "somebody else" having his web site down during several days waiting for you to correct your mistakes?
View 4 Replies
View Related
Aug 2, 2008
is there any one that have used LEASEWEB? Im gonna start buying a dedi server from them and I want to know if its an seriuos company..
View 14 Replies
View Related
May 21, 2008
Is there anyone here using leaseweb? Was hoping I can get a user who is using their server to give me their IP to check out the speed. I prefer to get real user's ip rather than IPs provider by the provider to ensure I get the real picture.
View 2 Replies
View Related
