Is S2U-MSFC2 Able To Handle 2 Full Tables
Jan 7, 2007Is S2U-MSFC2 able to handle 2 full internet routing tables or even 3?
and what is the difference between
WS-X6408 and WS-X6408A?
WS-X6348-RJ-45 and WS-X6548-RJ45?
ADVERTISEMENT
Can A VPS Handle This Full Flash Site
May 15, 2007I will be deploying a full-flash site for a customer. He wont experience that much traffic at once - I would say at most, one to three customers on at one time and most of the day the site would not have more than one client on at a time.
Will a VPS with the specs below with barely any other sites on the VPS be able to present this high-quality flash site in a fast manner. I understand that there is a whole world of optimizing flash which is what my designer is trained in but does anyone have any expereince deploying full flash sites on a VPS. I'm curious to get people's expereinces.
VPS Specs(VPS at knownhost at colo4dallas):
Plesk
Equal Share CPU(10-20 other customers on the node)
320 MB Guranteed RAM
1024 Burst RAM
MySQL Doubt: More DB's & Less Tables || More Tables Less DB's
Nov 2, 2009im planning on designing a webservice, it will have a lot of data, spread in many tables.
The problem is that there will be tables created constantly (around 5 each day..)
All tables/data will be accessed equally, so I dont know how to set up the system, to create multiple databases, and balance the number of tables equally on each database, or create less databases and have a lot of tables on each one.
Which one has more efficiency?
PowerAdmin - Not All Tables Are Ok
Dec 17, 2007This is the error that i get when i run test_setup.php:
Not all tables are ok!
Sorry, but there are error(s) found in the following table(s): 'records' 'domains'.
Please fix these errors and run the script again.
---
whereas rest of the tables (users, users_seq and zones)have been created.
Did i forget some step where these tables were to be created?
How can i create these tables now?
Why MySQL Tables Crash
Jul 15, 2009This is something i was wondering about and never found any answers.
Based on your experience, what are the most common reasons mysql tables crash?
Creating A CNAME Entry For DNS Tables
Feb 4, 2006I apoligize in advance if this is the wrong place to post this thread.
I am trying to create a CNAME entry in my DNS tables and have no clue where to begin.
I have did a search but didnt find anything that gives reference on how to do it just how to fix errors.
Can anyone point me in the right direction to learning how to accomplish this task.
Tables Grow In Size And Sometime And Need To Use RAID 5
Nov 2, 2009I have a database which is growing to have about 100 tables. These tables will grow in size and sometime I will need to use RAID 5, I am told by my server provider.
My questions are:-
1. if these other servers are mirrors, should I have the database stored on each server?
2. when one server gets too busy, does the RAID query a lesser-used server so as not to bog down the first one?
3. Or, do I need to have different content in each db on each server so a query gets what it needs form each?
Any Way To Use Mysqlcheck With Custom Tmp Tables Folder
Mar 24, 2009I am using /usr/bin/mysqlcheck --all-databases --check --auto-repair to check all MySQL DBs every day via cron. But sometimes when the DB crash and is being repaired the tmpdir = in /etc/my.cnf is getting full 100%. Is it any smart way to use some other tmp folder when repairing the DB tables like that?
View 6 Replies View RelatedOptimize All Tables In A MySQL Database
Oct 29, 2008how exactly it helps?
mysqlcheck -o -u...
Like what it does to "optimize" them? Does it really help?
Watchguard Firebox Vs Linux IP Tables Box
Mar 6, 2008I am considering on implementing a new firewall in our colo which would have about 10 servers behind it which generates on averages 2.314 megabits/sec for everything.
I am looking at the new Watchguard x750e running version 10 of Fireware which seem like a good fit without breaking the bank but I have also thought of simply implementing a Poweredge server running CentOS and running an IPtables config to provide firewall services.
Anybody have any Feedback on the Watchguard unit or use a Watchguard product in their setup and can comment?
Convert All Mysql Tables To Utf8
Jul 8, 2008I have a vbulletin (3.7.2) board with many mods installed (nearly 70) without a problem.
However, upon installing one new mod I got a database error stating:
MySQL Error : Illegal mix of collations (latin1_swedish_ci,IMPLICIT) and (latin1_general_ci,IMPLICIT) for operation '='
How do I change ALL tables in one shot (or sql query via phpmyadmin) from the two different collations to utf8?
Also, is utf8 suggested or better than latin1?
Creating Temp Tables On Disk
May 7, 2007In phpMyAdmin I see this:
Created_tmp_disk_tables 2,118 The number of temporary tables on disk created automatically by the server while executing statements. If Created_tmp_disk_tables is big, you may want to increase the tmp_table_size value to cause temporary tables to be memory-based instead of disk-based.
Created_tmp_files 0 How many temporary files mysqld has created.
Created_tmp_tables 5,637 The number of in-memory temporary tables created automatically by the server while executing statements.
I have tried upping tmp_table_size but it's no use. My my.cnf file:
Quote:
# Example MySQL config file for very large systems.
#
# This is for a large system with memory of 1G-2G where the system runs mainly
# MySQL.
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /var/lib/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password= your_password
port= 3306
socket= /var/lib/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port= 3306
socket= /var/lib/mysql/mysql.sock
skip-locking
key_buffer = 384M
max_allowed_packet = 1M
table_cache = 384
sort_buffer_size = 2M
read_buffer_size = 2M
read_rnd_buffer_size = 8M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size = 32M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
tmp_table_size = 300M
max_tmp_tables=100
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id= 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin
# Point the following paths to different dedicated disks
#tmpdir= /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 384M
#bdb_max_lock = 100000
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:2000M;ibdata2:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
#innodb_log_arch_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 384M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 100M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
This server has 1GB of RAM, not a dedicated sql server though. RAM usage is low too, 567MB of RAM is being used right now total... is there something I'm overlooking?
Are There Any Ways To Replicate Just A Few Tables On Mysql
Dec 21, 2007Is there no possible way I can slave just a few tables in mysql? instead of slaving the entire table on the main database server.
View 1 Replies View RelatedFantastico Script Creating Databases But Not Tables
Oct 20, 2006when fantastico applications get installed, for some reason they are creating the database, but none of the tables are installed.
View 6 Replies View RelatedHow Set Up Cron Job Auto Empty A Tables Of A Database
Dec 20, 2008How to set up cron job auto empty a table of an database at specify time.
OS: Centos 5 64 bit , Cpanel: cPanel 11.24.4-R32486 - WHM 11.24.2 - X 3.9
Iptables Script :: Configure IP Tables For Firewall
Oct 31, 2008I find it hard to configure IP tables for firewall, can I find already made scripts anywhere?
View 1 Replies View RelatedLock Tables Permission Keeps Getting Revoked From User(SQL)
Jul 12, 2007every 4 or 5 days the lock table permission keeps getting revoked, does anyone have anything that can point me in the general direction of what would cause this? The only thing i can think of is a cpanel layer 2 update has occured a few times during hte periods where the permission is revoked
unfortunately whenever it happens it results in my SQL backup script failing
It's a VPS host running CentOS btw.
How To Automatically Check And Repair Mysql Databases And Tables
Jul 16, 2009I have cPanle shared account.
Is there a way to automatically check and repair mysql databases and tables, that can be scheduled as cron job?
Mysql Deleted Several Tables Under High Server Load
Apr 27, 2007we have mysql 5 setup and this morning at around 10:07 tables started disappearing as they were being accessed by different clients.
Databases that had 40 tables now had 30, etc. Only the tables that were attempted to be accessed were gone. This is the first time something like this has happened.
The following output was given:
This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware.
We will try our best to scrape up some info that will hopefully help diagnose the
problem, but since we have already crashed, something is definitely wrong and this may fail.
key_buffer_size=8388600
read_buffer_size=131072
max_used_connections=208
max_connections=500
threads_connected=156
It is possible that mysqld could use up to
key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 1096188 K
bytes of memory
Hope that's ok; if not, decrease some variables in the equation.
thd=0xaf82930
Attempting backtrace. You can use the following information to find out
where mysqld died. If you see no messages after this, something went
terribly wrong...
Cannot determine thread, fp=0xb143932c, backtrace may not be correct.
Stack range sanity check OK, backtrace follows:
0x816b1a0
0xaf1898
0x20
0x81ac49d
0x8182914
0x8189010
0x8189df1
0x818a738
0x818ae5c
0xaeb371
0x9c4ffe
New value of fp=(nil) failed sanity check, terminating stack trace!
Please read [url]and follow instructions on how to resolve the stack trace. Resolved
stack trace is much more helpful in diagnosing the problem, so please do
resolve it
Trying to get some variables.
Some pointers may be invalid and cause the dump to abort...
thd->query at 0xaf36620 = SELECT * FROM `sessions` WHERE `PHPSESSID` = '5e6775cd3c6f187d8c575127ba73be19'
thd->thread_id=113407
The manual page at [url]contains
information that should help you find out what is causing the crash.
mysqld: my_new.cc:51: int __cxa_pure_virtual(): Assertion `"Pure virtual method called." == "Aborted"' failed.
Number of processes running now: 0
070427 10:07:49 mysqld restarted
070427 10:07:50 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
InnoDB: Restoring possible half-written data pages from the doublewrite
InnoDB: buffer...
070427 10:07:53 InnoDB: Starting log scan based on checkpoint at
InnoDB: log sequence number 0 227822203.
InnoDB: Doing recovery: scanned up to log sequence number 0 227822203
070427 10:07:53 InnoDB: Started; log sequence number 0 227822203
070427 10:07:54 [Note] /usr/sbin/mysqld: ready for connections.
Plesk 12.x / Windows :: Wordpress Install Created Duplicate Tables
Feb 8, 2015Window server 2012 r2: I installed wordpress on a domain using plesk. Seemed to work correctly. But when I went to the site www.example.com/wp-admin, the native or default wordpress install started up. I could find no way to bypass this, so I just re-entered all the same settings.
The result was that I ended up with 2 sets of database tables, one set named with my chosen prefix wp_blahblah_ and one set prefixed with wp_blahblah_wp_.
Not good, so I deleted the later set. Wordpress seems to be working, despite one error on the tables I can't reproduce.
Can A 256 MB VPS Handle My Traffic
Apr 1, 2008I've only ever had a shared hosting account with Hostgator, plus a few freebie hosts. However, I'm now pulling some heavy traffic and I'm concerned that Hostgator is going to suspend me soon.
My traffic on Saturday for example was ~2600 unique visitors and ~5000 page views. All of this traffic was from WordPress blogs and a small SMF forum. I've since converted one of the blogs to a static site to limit my CPU usage and I've setup caching for my other WordPress blogs. Advice I've heard on the Hostgator forums is that 7000 page views per day for a database driven site is around the time you should be upgrading and based on my traffic from Saturday (which admittedly was a bit of a spike) I could potentially be receiving 150,000 page views/month, so about 20x the point at which they recommend upgrading at.
Anyhows, in a nutshell I need to upgrade, or risk Hostgator throwing a tantrum at me ... but I don't have a lot of cash to pay for an upgrade Due to my lack of cashflow I've been considering moving to a VPS. The company which has interested me the most is HostV.com who offer a 256 MB (with 1000 MB 'burst' RAM) for only US$39.99 which seems quite reasonable to me.
They say that their 256 MB plan should be able to handle over 5000 page views per day for a WordPress run site, but I'm a little suspect. Do any of you know if this is a reasonable expectation from a 256 MB chunk of a virtual server? I have no idea and am always wary of believing the sales pitch of a random company across the other side of the world.
Can The Server Handle It
Nov 26, 2007Dedicated machine with 750GB HD x2, 16GB Ram, Dual Opteron 2212 Dual Core Processors, we are on a 100mbps burstable.
Im wondering how many vps i can load into this machine efficiently, any ideas on this?
That Can Handle This Script
Oct 20, 2007PHPAuction GPL Enhanced V2.51 Auction Software seems to be the perfect solution for my client, but the PHP requirements are very specific and the host we currently are using doesn't allow anyone to play with .htacess which is the usual workaround. Can anyone recommend a host that they know has the following setup?
Minimal server requirements are as follows:
- Apache web server
- PHP 4.0.6 or later (see below) with safe_mode=Off - register_globals=on - no open_basedir restriction
- MySQL Database - 3.0 or higher
- "Cookies" MUST be enabled on your computer!
Alternatively, does anyone know of any auction software that restricts sellers to only the admin?
What Type Of Server To Handle
Mar 13, 2009I have a client that asked me to educate myself about web hosting and make a recommendation to him about where he should be. He currently has a shared hosting server at Network Solutions and finds unexplained slow downs and disk corruption reports in his forums DB unacceptable.
I'm glad I found this site-lots of good info but nothing like throwing up some stats and seeing what people recommend. The client told me he wanted to move to a dedicated server but I'm thinking a VPS might do the trick. Especially if upgraded with dedicated Core as well as RAM such as wiredtree is offering.
Looking for a managed, Unix based server that in a typical month serves
100k unique visitors
230k page views
500Gb of downloads
But needs to be easily upgradeable to handle his expected traffic levels in the next year of monthly visits in the order of:
250k unique visitors
600k page views
1.1Tb of throughput
As far as features:
*Currently they use about 15 gigs of disk space. Some of that is inefficient disk management but the bulk is them supporting previous software releases.
*needs to be fully managed
*US datacenter with all the features you guys would expect to have as far as backbone access, security, power backups, etc..
*Backups by provider. Let's say 5 gigs worth since the old software versions don't really need to be backed up.(I'll recommend his own backups as well)
*Either plesk or cpanel
*15 minute hardware SLA is what the client is asking for but i'd like to present some comparisons to 1 hour SLA companies to see how much he'd save.
And finally, i tried to search for the answer to this but the keywords kept bringing up lots of hits without good info. The client sells software so the bandwidth needed is pretty consistent until they release a new version. Then it skyrockets to the point they may have 1500 people trying to download a 50Meg file simultaneously. What is the right way to handle that? Use a CDN or negotiate with the hosting provider to provide burstable bandwidth as needed. As a side note while looking at many offerings I was most surprised that bandwidth seems to sold in large chunks with overage costs hidden.
How Many Sites Can Q6600 Handle
May 10, 2009i will upgrade my server to:
Core2Quad Q6600
8 GB Ram
1000 GB HDD
1000 GB 2nd HDD
cpanel
how many sites can this server will handle?
if the sites will be small forums?
What Kind Of Website Can 1GB Ram Handle
Oct 19, 2009I'm not quite sure how much of Ram I need for my vps, But I'm going to get
1GB Vps from wiredtree.com
Anyone can tell me what kind of website I would be able to run on such an VPS? If it's just wordpress driven website...
Maybe anyone can share how much traffic your site have and how much ram it's using?
At the moment I have website with about 40k uniques/day and ~100k pageloads per day hosted on shared hosting but they have gave me 3days to find another hosting because they say I use to much of their traffic...
VPS That Can Handle HD Video Smoothly
Oct 16, 2009We are putting together a Video Blog to feature 50 3 minute videos that will be H.264 high definition (720 by 1280)
We want to know what configuration would be best.
We expect no more than 500 visitors a day to this site.
Even Vimeo is stuttery and we would like to avoid that.
How To Handle DNS With A Dedicated Server?
Oct 10, 2008I use zoneedit to point my domain to the server, and a few times their servers don't respond for a few minutes that causes my site to be unaccessible. I was wondering if there was any better way of doing this? Please give me suggestions on what to do to have proper dns.
View 5 Replies View RelatedApache 2.2 Can't Handle Vhosts
Mar 25, 2007Either Apache 2.2 can't handle vhosts or I don't get apache anymore.
Have a look at the conf files (I stripped out all the commented lines):
httpd.conf
Code:
ServerRoot "/usr/local/apache2"
Listen 80
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule dbd_module modules/mod_dbd.so
LoadModule dumpio_module modules/mod_dumpio.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
LoadModule ident_module modules/mod_ident.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imagemap_module modules/mod_imagemap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule php5_module modules/libphp5.so
<IfModule !mpm_netware_module>
User apache
Group apache
</IfModule>
ServerAdmin you@example.com
DocumentRoot "/usr/local/apache2/htdocs"
<Directory />
Options FollowSymLinks
AllowOverride None
Order deny,allow
Deny from all
</Directory>
<Directory "/usr/local/apache2/htdocs">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule dir_module>
DirectoryIndex index.html index.php
</IfModule>
<FilesMatch "^.ht">
Order allow,deny
Deny from all
Satisfy All
</FilesMatch>
ErrorLog logs/error_log
LogLevel warn
<IfModule log_config_module>
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined
LogFormat "%h %l %u %t "%r" %>s %b" common
<IfModule logio_module>
LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio
</IfModule>
CustomLog logs/access_log common
</IfModule>
<IfModule alias_module>
ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"
</IfModule>
<IfModule cgid_module>
</IfModule>
<Directory "/usr/local/apache2/cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
DefaultType text/plain
<IfModule mime_module>
TypesConfig conf/mime.types
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php
</IfModule>
Include conf/extra/httpd-vhosts.conf
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
httpd-vhosts.conf
Code:
NameVirtualHost *:80
<VirtualHost xxx.xxx.xxx.xxx:80>
ServerAdmin cs@reflexnetworks.net
DocumentRoot /home/reflextest/public_html
<Directory "/home/reflextest/public_html">
Options Indexes FollowSymLinks
AllowOverride None
Order allow,deny
Allow from all
</Directory>
ServerName test.reflexnetworks.net
ServerAlias www.test.reflexnetworks.net
ErrorLog logs/test.reflexnetworks.net-error_log
CustomLog logs/test.reflexnetworks.net-access_log common
</VirtualHost>
( xxx.xxx.xxx.xxx is the correct IP). The <Directory "/home/reflextest/public_html">...</Directory> part does not make any difference
Permissions:
Code:
ls -lR reflextest/
reflextest/:
total 4
drwxr-xr-x 2 reflextest apache 4096 Mar 25 04:50 public_html
reflextest/public_html:
total 4
-rw-r--r-- 1 reflextest apache 22 Mar 25 04:50 index.html
This is a source compile of apache. See for yourself: [url]
Best Way To Handle Transfer Of Hosting
Nov 7, 2007We are switching our servers, and I am trying to have the smallest amount of downtime possible. What is the best way to go from one host to another.
Should I have the old and new DNS info entered at the site registrar until the new site has been resolved?