Assuming that one was to get a local office in a town, how would someone find building or area that had a high availbility of fiber nearby, but was not a datacenter? Are their fiber maps for each big city? Does anyone have fiber maps for Houston, Texas? I would be interested in seeing these maps if possible.
View 5 Replies
Ive just being doing some pings and tracerts on burst and it looks to me they have there new X0 fiber installed i still get around 20 hops and average 120ms ping any body found the new transit any quicker, im still deciding weather to go back to burst or not, the speeds are pretty much the same but it is too early to justify there stability
What do you think so far?
Tracing route to burst.net [66.96.192.201]
over a maximum of 30 hops:
1 53 ms 98 ms 98 ms api.home [192.168.1.254]
2 38 ms 36 ms 35 ms 217.41.191.122
3 35 ms 35 ms 36 ms 217.47.41.161
4 36 ms 35 ms 35 ms 217.41.175.13
5 33 ms 36 ms 36 ms 217.41.175.126
6 139 ms 189 ms 191 ms 217.41.175.54
7 43 ms 34 ms 35 ms 217.47.74.99
8 35 ms 37 ms 36 ms core1-pos12-1.bletchley.ukcore.bt.net [194.72.31
.5]
9 40 ms 38 ms 44 ms core1-pos0-7-0-12.ealing.ukcore.bt.net [62.6.200
.109]
10 38 ms 37 ms 38 ms transit1-gig8-0-0.ealing.ukcore.bt.net [62.6.200
.110]
11 38 ms 37 ms 35 ms t2c1-p11-0.uk-eal.eu.bt.net [166.49.168.17]
12 37 ms 37 ms 37 ms t2c2-p3-2.uk-lon1.eu.bt.net [166.49.164.138]
13 39 ms 37 ms 37 ms t2a1-ge7-0-0.uk-lon1.eu.bt.net [166.49.135.110]
14 39 ms 37 ms 37 ms 195.66.224.130
15 37 ms 37 ms 37 ms p5-0-0d0.rar1.london-en.uk.xo.net [71.5.174.133]
16 110 ms 111 ms 111 ms p1-0-0d0.rar1.nyc-ny.us.xo.net [65.106.0.118]
17 118 ms 119 ms 117 ms 207.88.14.85.ptr.us.xo.net [207.88.14.85]
18 257 ms 209 ms 206 ms 207.88.14.86.ptr.us.xo.net [207.88.14.86]
19 128 ms 130 ms 127 ms 207.88.182.62.ptr.us.xo.net [207.88.182.62]
20 120 ms 121 ms 121 ms burst.net [66.96.192.201]
Trace complete.
C:UsersMe>ping 66.96.192.201
Pinging 66.96.192.201 with 32 bytes of data:
Reply from 66.96.192.201: bytes=32 time=121ms TTL=48
Reply from 66.96.192.201: bytes=32 time=122ms TTL=48
Reply from 66.96.192.201: bytes=32 time=122ms TTL=48
Reply from 66.96.192.201: bytes=32 time=120ms TTL=48
Ping statistics for 66.96.192.201:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 120ms, Maximum = 122ms, Average = 121ms
C:UsersJames>
Has anyone looked into getting dark fiber verse going direct with a transport provider? How much does dark fiber cost compared to say a Gig-E transport line? What kind of equipment is needed on each end of the fiber, and how much does this equipment cost? At what point does a provider look for dark fiber verse getting transport for a Lit provider?
View 4 Replies View RelatedI saw their advertisement on WHT and trying to contact their sales and i got nice reply from their sales.
i want know if everyone used them?How about their support, uptime etc ?
A colo place in uk as me if I want a single drop or redundant drop to run my fiber... what do they mean?
View 1 Replies View RelatedWe have a large amount of multimode fiber coiled up under our raised floor that needs to be removed. The end that remains intact is running to a SAN cabinet that is very densely populated and our vendor has suggested cutting the fiber to make it easier to remove without disturbing the remaining active fiber.
Does anyone have any experience cutting fiber in a data center environment ?
Are glass fragments or any other debris a concern ?
Does anyone have any information on a company called BROOKS FIBER COMMUNICATIONS - TEXAS? They are showing up in a couple CO's on the telcodata.us website.
I think they might have been bought out, possibly by Verizon/MCI. If anyone can share any information about this company that would be great. Nothing seems to show up in google.
Me and my friend are looking to place a few servers for a soho (3 servers or so). We need advise as the incoming connectivity will be fiber so we need to know what do we need to receive that fiber, we opted to go for the catalyst 2950 for the switch but if there's a good fiber switch,
Fiber will be 10mbps.
I put this in the co-location section since I am co-locating a server that I host a few Websites on. The server is located in the Pacfic Northwest at a hosting company out there. As you may know, this is a "more remote" area of the United States.
Today, the company lost all Internet access when a Fiber optic cable went down. Not only was my stufff down but the entire hosting company was down. In 10 years of doing Internet development, I have never seen this happen to any hosting company I have worked with no matter how good or bad they were. On top of that, it happened one time last year as well.
According to my co-location provider, the problem happened a long way up stream. SO far that the lines cannot be backed up. Is this true? Could a fiber optic cable fail at some point where it cannot be switched over to another line?
I don't know if I should I believe that or not. It would seem to me that it is a matter of money and they may not have a back-up system in place if the pipe goes down. Is it possible? Who's fault is it?
who does fiber to the business parks in Troy, just off 75.
View 7 Replies View RelatedTelia is reporting a fiber cut in the US - any other carriers impacted?
from Telia:
We regret to advise that we are currently experiencing a cable cut in
the United States. This outage is causing degradation in our IP
backbone, which may affect your service.
The fault has been brought to the attention of senior management, and we
are actively working to resolve the fault. Unfortunately we do not know
when the fault will be resolved.
We will update you as soon as we have further information, and apologise
for the inconvenience caused to you and your customers.
how can i do a search for all files (probs using regex) of files consisting purely of numbers?
for e.g. find:
53243.php
24353.php
24098.php
(always have 5 numbers).
seems one of my accounts has had some script run which generated a bunch of these in various subfolders, and the php file basically does a callback to www3.rssnews.ws and www3.xmldata.info, which seem to be some sort of spyware servers.
Here is the screen shot of the "mtr" running from two servers:
Server1: Fibre optic line from Tata Communication
Server2: DSL line from Tata Communications
Source servers are located in Kolkata India
Target server is located in Fremont California.
The fiber optic cable has:
A. Higher ping time and
B. Higher standard deviation
compared to the DSl line.
I just came across this listing for Corning Optical Fiber LEAF(R) on eBay [url]. I've never used optic fiber cables before and want to experiment with them for indoor and inter-floor(friend below) use. The listing says that the coating is CPC6, which is some kind of acrylic coating over the fiber.
My question is: Can the above cable be used without further sleeving or some other protection/covering over it? I read somewhere that the cable must be reinforced and covered with PVC jacket or something,
I can't seem to figure out why this is not working. I want to cd into a directory and only compress certain files. However, what I end up with is a file called ..tgz (I am not sure why it is adding that other dot).
Here is the command line:
find . -mmin +1 -exec tar czf {}.tgz {} ;
I have a CentOS web server at my company. It's dual opteron. That server also acts like a router and I have about 5 computer are connected to that router. My web server has been slowed and can i find out who is using my bw ?. Those 5 computers has only local ips (10.10.0.x).
that my website is just for me, no one else know that website.
Someone posted some code similar to below, I made modifications or two after trying to detect PHP "nobody" users, after dumping a few printenv I found PHP exports PWD when calling an external program such sendmail. Basically the PWD will show the user directory that is coming from, which is enough to detect who is sending SPAM even as nobody! It's not 100% secure in that they could wipe /var/log/formmail but I don't imagine any spam will notice the logger, they presume any cPanel server (or other CP for that matter) is the same.
mv /usr/sbin/sendmail /usr/sbin/sendmail2
pico /usr/bin/sendmail (paste the below code into it)
chmod +x /usr/bin/sendmail
echo > /var/log/formmail
chmod 777 /var/log/formail
#!/usr/local/bin/perl
# use strict;
use Env;
my $date = `date`;
chomp $date;
open (INFO, ">>/var/log/formmail.log") || die "Failed to open file ::$!";
my $uid = $>;
my @info = getpwuid($uid);
if($REMOTE_ADDR) {
print INFO "$date - $REMOTE_ADDR ran $SCRIPT_NAME at $SERVER_NAME";
}
else {
print INFO "$date - $PWD - @info";
}
my $mailprog = '/usr/sbin/sendmail.real';
foreach (@ARGV) {
$arg="$arg" . " $_";
}
open (MAIL,"|$mailprog $arg") || die "cannot open $mailprog: $!";
while (<STDIN> ) {
print MAIL;
}
close (INFO);
close (MAIL);
i want to know more about there service.
does any one work with them?
i need more review about them.
in which folder is the crontab generally located.
i run LAMP
also,i m looking for a specific cron right now (xbt_cron).once i find it ,what command do i use to run it manually.its supposed to run by itself..i just moved to a new server last week and now its stopped working.
I tried searching for it on google but couldn't find any server company offering VPS using Litespeed instead of Apache. Yes, I know that Apache could be optimized, but would like to try a VPS or dedicated server with Litespeed, just for testing and learning to use and troubleshoot Litespeed. Does anybody here know of a supplier? I would need less than 10 gigs, 250+ Ram as well as cPanel.
View 13 Replies View RelatedHow can I find a path in my VPS? It uses virtuozzo. I am new to all this so this might be a stupid question..
For example, my host says ffmpeg is in usr/bin/ffmpeg,, how do I find /usr/?
Here's my situation:
I run a site that does a lot of transfers AND uses a lot of CPU resources. I think I would like to get two different hosting plans to deal with these different patterns of usage, but where can I find a good host offering lots of bandwidth that is content to have it actually used? I've been with DreamHost for a while but they don't allow "data archiving" or whatever (and I have arguments against their claims but it's neither here nor there). So, really, where the heck can a guy find a good host offering plenty of space and bandwidth? Keep in mind I need pretty much no CPU power with such a plan; the web server can be stone cold stupid for all I care, as I can just get a VPS to run the CPU-intensive part of my site!
I was wondering how you guys go about finding a host?
Where do you do your research?
What forums do you use?
What else do you do in your process before finding a web host?
Do you subscribe to newsletters or web host magazines?
Weve got a server where the /var is setup at 7gb, which is now %100 full.
Weve deleted the common logs we always notice, but thats only gotten us down to %94.
Anyone have any ideas what we should be cleaning or a good script that might help?
seems 5.5gb of data is in /lib
What is safe to delete from /lib and why is it taking up so much space?
If I have PID 1122 of apche httpd and using 99% CPU. How can I find the crosponding web site name which is utilizing that much CPU so I can the suspend it.
View 1 Replies View RelatedOver the last day. I have noticed that something is suddenly taking up 15gb on my server.
My server is Centos.
How would i find what this is. I have tried for about 1 hour to track this down but cant find anything.
How do i do a search of all files on the server and arranging it by the file size.
waht i do ?
Code:
root@server [~]# service exim restart
Shutting down clamd: [ OK ]
Shutting down exim: [ OK ]
Shutting down antirelayd: [FAILED]
Shutting down spamd: [ OK ]
Starting clamd: [ OK ]
Starting exim-26: [ OK ]
Starting exim: [ OK ]
Starting exim-smtps: [ OK ]
Starting antirelayd: Cannot find the maillog at /usr/sbin/antirelayd line 26.
[FAILED]
Starting spamd: [ OK ]
I can't find wget on a hosting. SSH command find / -name wget returns with nothing, however wget works properly on a hosting, what could the problem be?
View 14 Replies View RelatedSome of our servers are complaining that they can't access the website. How can we check the blocked IPs using IP tables rules? Are there any special command to check?
View 3 Replies View RelatedHow can i find shell in my server?
is a program that find them?
my server is linux / centos / cpanel control panel
how can i disable shell in my server?
and stop deface
where can I find free hosts?
View 1 Replies View Related
