How To Determine Spped Of Server

Apr 22, 2009

How users can determine speed of host provider?

It can be ping in windows command prompt.

Is this good way to determine speed of server?

Is something else to check speed?

View 8 Replies


ADVERTISEMENT

Determine Amps Of Server

Sep 25, 2009

I have always found this odd and do not understand enough to figure it out.

Any knowledgeable people would be cool.

My datacenter has given me 2amp circuit for my computer. It seems to run fine on it.

Looking at the back of my power supply it says the following

520Watt max

Input rating
100-240v~,50-60Hz
7A-3A

Output rating
+3.3V & +5V combined 150W max
12V combined current 39A max
(and a lot of other stuff on amps and volts for output).

Now, Watts = Volts * Amps.
So if I have 520watts and 12 volts would be 43 amps
If it means 520 watts and 3.3volts it would be 157 amps
However it seems to max at 39amps on the back for output.

I imagine input is all that matters here and at 520 watts and 100 to 240volts that would be
5.2 amps to 2.16 amps

And the thing says 7amps to 3 amps on the back for input.

So....I imagine that is the max it can pull before dying.

However, I have 4 drives, 4 ram sticks, and 2 quad core cpus all going and I would figure I am at least halfway or more of the power use.

And the power says it starts at 3amps anyway.

But I only get 2amps.

View 9 Replies View Related

Determine Which Script Is Crashing A Server

Sep 1, 2008

Assuming a linux server / apache / php / mysql setup

I'm wondering 1) how you can find out which php script is causing problems, i assume infinite looping, crashing a server and 2) are there any measures you can take (maybe in the php or apache configuration) that can prevent such a thing from happening in the first place, other than writing good code obviously?

View 3 Replies View Related

Determine When An Ip Address Accesses My Server

Apr 10, 2007

a log file analysis program that can tell me the exact time an ip address accesses my server and how many times that particular ip address hits the server.

Does anybody know of a package that supports this, or is it even possible?

View 3 Replies View Related

Determine What Cron Jobs Are Killing Server And When

Jan 8, 2009

We're running on Linux/Apache/MySQL/RoR and have a number of cron jobs that run throughout the day on our server. We've been noticing lately that at certain times of the day the site becomes really slow. When I'm online with my engineers I can mention this to them and they can check and see and say "Oh yeah, it's job XYZ that's spiking the server load."

That's great but much of the time when I notice the sluggishness my developers are offline (we're in different time zones). I'm wondering if there's a fairly easy way to track this when they're not online so we can say "Yup, last night at 10 PM your time when you noticed that it was job ABC." There has to be something that allows you to do this right?

View 3 Replies View Related

How To Determine Port Speed On CentOS Server

Jun 3, 2008

How can I detect port speed on my CentOS server ? I need to know it's 10Mbit/s or 100Mbit/s

View 6 Replies View Related

Apache Error :: Could Not Reliably Determine The Server's Fully Qualified Domain Name, Using 127.0.0.1

Aug 1, 2008

Whenever I restart my apache on my VPS, it throws some wierd warnings:

Forcing reload of web server (apache2)...apache2: apr_sockaddr_info_get() failed for goebs
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
waiting apache2: apr_sockaddr_info_get() failed for goebs
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
.

where goebs is my VPS linux machine hostname.

I already have a domain setup with this VPS, and it works fine, just that I get this weird warning.

View 1 Replies View Related

How To Determine Total CPU Ghz

Jun 19, 2009

I was told multiplying the core by the cpu ghz is a common misconception, if so what is the right way?

View 1 Replies View Related

Cannot Determine Old IP Address

Feb 18, 2008

I accidently deleted my /home/virtfs folder and lost alot of stuff on my new box.

I had cpanel re-installed and transfered my /var/cpanel/users to the new box. I Changed all the IP's on all the files in there.

I edited the /usr/local/apache/conf/httpd.conf file and changed all the ips of the virtual hosts and the accounts on them.

cd /usr/local/apache/conf
replace oldip1 newip1 -- httpd.conf
replace oldip2 newip2 -- httpd.conf
replace oldip3 new1p3 -- httpd.conf
replace oldip4 newip4 -- httpd.conf

All IP's were changed over to the new one.

I then ran:

/scripts/updateuserdomains
/usr/local/cpanel/bin/build_apache_conf

But it some how sent my IP's back to the old one.

View 3 Replies View Related

VPS SLOW - How Can I Determine Cause

May 10, 2007

I'm have a VDS with hosting-ie, and it is extremely slow.. I run almost nothing on it..

I'm not running a website, no MYSQL, no Databases.. just newsleecher, a bittorent client for seeding ubunto and occassionally i'll open ftp program to transfer files from home to server.

Lately, i can't even just have newsleecher open by itself and have it running, as it pauses waiting for threads to catch up. If I close everything, i sometimes have to still wait from 30-45 seconds just to open the My Computer Icon. To me thats not acceptable. 26 processes running, with none larger than 10K, memory commit will go up to 90M of 1024M.. let its too slow to run anything.

Their support tell me, that even though its dedicated resources, i'm on a box with 4 other hosts., so hence it being slow. Their suggestion is I upgrade to another box.. I find it hard to believe that i should have to upgrade so I can run a few non-memory intensive programs.

What can i do to prove to them that there is a problem? I'm locked into a 3 month commitment. What use is a VDS server that run 1 application? Is there specific counters i can enable that would get to the heart of the matter?

It is Win2003 running on it. 60 G HD , 1.5 Ghz CPU, 1G Ram. I read some of the other threads, but they seem to be more for someone that has access outside of their VDS.. (unless i missed one)

edit: I suggested to them maybe someone is hammering the HD, but they say there is no hard disk, that its only allocated space..(?)

View 6 Replies View Related

Determine IP Address

Aug 6, 2007

I am trying to determine an IP Address i have behind a router.

Both PC's linked to the router come back with the same IP Address, which i'm assuming is the IP Address of the router.

One of the PC's i'm using is my development server, so how do i access this from outside of my LAN?

IP Address Being Displayed on outside XX.XX.204.44

IPCONFIG tells me my ip is XXX.168.0.100 on the dev server.

Which/How would i place into a web browser to bring up a site from the box?

View 2 Replies View Related

How To Determine Load On Two VPS's And See If They Can Be Merged

Jan 24, 2008

I have two VPS's.

Main VPS is 1152mb SLM ram running only a relatively small vBulletin community. My goal is to keep this as fast as possible, which is why I overbought on the VPS and recently moved my couple other low volume sites (and some higher volume image hosting) + some email acccounts on to a 512mb SLM VPS.

Both VPS's are Cpanel/WHM running centros 4 (might be 4.5, I'm confused on this) and the latest release version of whm.

What I am wondering is what stats/tracking I might be able to run to see what typical usage is on the two VPS's for a day or two and try and figure out if I jumped the gun in splitting them, and can safely remerge them without effecting the vBulletin performance.

Can someone help me out with how to setup and read some stats that would tell me if both VPS's are underutilized enough to merge them back together onto the 1152mb VPS?

View 3 Replies View Related

Determine If Firewall Is Blocking IIS 5

Nov 26, 2007

I'm trying to set up a site on IIS 5. I think I've done the setup on IIS ok, but when I try the site, it's not getting served. I think there might be a firewall in the way, blocking port 80. Any idea how I would test to see if this is the case?

View 1 Replies View Related

Anyway To Determine How Many Visitors Subscribe To Rss Feeds

Jun 5, 2007

Is there anyway to determine how many visitors subscribe to an RSS feed? (besides using something like technorati or feedburner) Does anyone know of a log analyzer will do this or another custom solution?

View 0 Replies View Related

Unable To Determine IP Address Error

Oct 14, 2007

The following error was encountered:

Unable to determine IP address from host name for mydomain.com

The dnsserver returned:

Server Failure: The name server was unable to process this query.

This means that:

The cache was not able to resolve the hostname presented in the URL.

Check if the address is correct.

Your cache administrator is admin.

what can I say to my provider

View 1 Replies View Related

Determine What Service Is Creating Traffic

May 24, 2007

I'm using MRTG to display graphs of traffic to my server, and today noticed a period of several hours where there was a lot of *incoming* data over the network, which is unusual. There's a good chance it's some harmless script or service that I've forgotten about, but really I need more information on what services/ports are creating what traffic, which brings me to my question.

I'm wondering whether there's an easy way to check what services (or ports) are creating traffic, and what volumes of traffic. It would be nice if it was possible to graph or breakdown the traffic by service somehow, and determine which are the biggest users of bandwidth and when. This is a dedicated CentOS server that I can install basically anything on, but that doesn't use a control panel, so I'd like to see what great ideas you folks can come up with, or whether there's any nice software you can suggest. I'm only using the server for hobbyist stuff at the moment, so free software, or ideas using built in commands are preferable.

View 3 Replies View Related

Cpanel Services Failing And Being Restarted, How Do I Determine Cause

Nov 15, 2008

Cpanel installed on Centos 5.2 on a dedicated server.

This morning, I received multiple emails about services being restarted. About 20 minutes apart, with nothing that I coudl see going on with the server, I had multiple services fail and restart.

How do I trouble shoot this to see if there is a problem?

At 6:21 The following services failed:
httpd
lfd
httpd
cpsrvd
lfd
and I received emailed messages similar to these (obviously the port and service name were didfferent in each email).
cpsrvd failed @ Sat Nov 15 06:21:29 2008. A restart was attempted automagically.
Failure Reason: Unable to connect to port 2086
Then, at 6:42 The following services failed:
cpsrvd
cpsrvd
httpd
lfd
httpd
lfd
and I received emailed messages similar to these (obviously the port and service name were didfferent in each email).
cpsrvd failed @ Sat Nov 15 06:21:29 2008. A restart was attempted automagically.

View 5 Replies View Related

RAM Bursted Over 70,000 Time In 100 Days! How To Determine Offending Site

Jun 27, 2007

I was told that I have bursted the RAM on my VPS, over 70,000 time since the parent server was rebooted 100 days ago. How do I determine what site is causing this (including mine, which isn't DB driven (yet))?

View 8 Replies View Related

Apache :: Using External Webpage To Determine Rewrite Condition

Mar 11, 2015

I am looking for a way to put a rewrite condition into my configuration where I can poll an external web page and based on the http status code, allow the rewrite or not.

I am doing this in order to set a maintenance status on two different proxy servers, one is apache the other is a big-ip. I already have the maintenance pages and control setup on the big-ip, but I need a way to poll a url and pull a specific http status code served up by the big-ip.

View 3 Replies View Related

Plesk 12.x / Windows :: Unable To Determine Preferred PHP Handler ID

Apr 27, 2015

I'm receiving the following error whenever I try to edit any hosting settings

Unable to determine preferred php handler id

I've found the article for this on the Linux KB (which states to raise a support ticket) but nothing on Windows.

I am running Windows Server 2012 R2 with Plesk 12.0.18

View 1 Replies View Related

Plesk Automation :: Cannot Determine Remote Host Hostname Platform

Apr 14, 2014

i have installed ppa 11.5 update #3 and now updated to update #4.

While adding new service nodes, i get everytime the error "Can not determine remote host "hostname" platform". I tryed Apache web server standalone and with mysql, postfix...

View 6 Replies View Related

Improve Performance- Web Server, SSH Server, And Mail Server

May 8, 2007

I've got a VPS which is serving as the main server for a number of sites. Web Server, SSH Server, and Mail Server.

What I've got running:

Apache2, PHP5, MySQL5, Dovecot, Postfix

One of the sites is a growing forum with a MASSIVE photo album. This is the site where I notice the most slowness.

Changing the server software is not an option - Only optimization.

Quote:

Originally Posted by httpd.conf

ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
StartServers 8
MinSpareServers 8
MaxSpareServers 13
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 50
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
Include conf.d/*.conf
User apache
Group apache

Quote:

Originally Posted by my.cnf

[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1

[mysql.server]
user=mysql
basedir=/var/lib

[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid

View 8 Replies View Related

Remote Upload To Server (url/server To Server)

Mar 7, 2009

I looked a lot - can not find solution ....

I want to transfer a file from [url]to [url]or [url]Without it will pass my localcomputer (slow upload)

It can be also a script i will install like this one - this is only for images
[url](remote)

View 7 Replies View Related

Plesk 11.x / Windows :: Don't Have Root Access To Server As It Is A Webfusion Dedicated Server

Oct 16, 2013

I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -

1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL

FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??

URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??

View 1 Replies View Related

Urchin 5 / Google A . Transfering From Server To Server (Serial Already Activated)

Nov 21, 2006

I am currently running Google Analytics/Urchin 5 (v5.7.02), on a server, the server has started to act up, (on its last legs etc) and now I am trying to transfer the Urchin Software to a new server, where it would work effectively.

However upon installing the urchin software on the new server and running it (localhost:9999), I am presented with An Action Items Page, and these following choices

Obtain Demo License
Buy License
Activate Pre-Purchased License

I choose ‘Activate Pre-Purchased License’ pop in the Serial number and complete the registration then…

---------------------------------------------------------
Urchin Licensing Center -- Error!

An error has occured during your transaction, please use the back button and correct the problem. The specific error message is:

• Unable to generate a license. Some possible reasons:

Your serial code is currently active <<< How do I disable it and use it on another server?
---------------------------------------------------------

So all I want to do is deactivate the serial and reactivate it on another server.

Does anyone have experience with this or a similar problem or have a solution to this problem. Any help be most appriciated.

Or even a Contact Number so that i can get some one over the phone!

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved