What is the difference between FileZilla Client and FileZilla Server?
I'm using windows vista ultimate 32bit. What was written on the filezilla page is that FileZilla Client is for all platforms and FileZilla Server is for windows only.
I'm running FileZilla Server on Windows Server 2008 Web Edition SP2. Everything works fine but I need to figure out how to make FileZilla set permissions on a file after its uploaded.
What is happening when I upload a file to the web server using through FileZilla Server the only permissions set on the file are for
SYSTEM
admin
Administrators
So when I try to access the file through a website I get a 401 - Unauthorized error and I have to go through and manually set the permissions every time on the server.
I need to find out how to make FileZilla setup the correct permissions on the file for the IIS user. Any help would be appreciated.
My Sever setup
DotNetPanel
IIS 7.0
Windows Server 2008 Web Edition
FileZilla Server
8GB Ram
it seems that a particular client of mine complains that each time he trys to update his WHMCS, he gets blocked halfway. i also got a log about his ip getting banned due to ddos attack. is there a way to fix this? is it only filezilla that does this?
View 6 Replies View RelatedTimezone on server is set to GMT -5 EDT
My timezone is GMT -5 EDT
Yet filezilla 3.x ftp client connected to my server's pure-ftpd server offsets time on transferred files by an hour, saying now at 8:52 that the file was uploaded to the server at 9:52.
WHM and uptime, etc. at the SSH prompt show server time correct, matching my own time.
But connecting via filezilla 3 I get:
Status: Calculating timezone offset of server...
Command:MDTM .htaccess
Response:213 20080208013750
Status:Timezone offsets: Server: -18000 seconds. Local: -14400 seconds. Difference: 3600 seconds.
Status: Directory listing successful
If I connect locally to pure-ftp via the server shell ftp, I get
Connected to localhost.
220---------- Welcome to Pure-FTPd [TLS] ----------
220-You are user number 1 of 50 allowed.
220-Local time is now 20:52. Server port: 21.
which matches
$ uptime
20:52:28
The filezilla forums however indicate the problem is due to some "non-standards compliant setup" of my ftp server.
[url]
Quote:
As required in RFC 3659 [url]FileZilla assumed MDTM returns timestamps in UTC. Based on the timestamp return in the LIST reply and the corresponding MDTM reply, it calculates the timezone offset of the server.
Obviously this fails on broken or misconfigured servers.
I can assure you that it works fine on all standards-compliant servers.
Is there something I can tweak with pure-ftpd, or is this a Filezilla 3 bug?
I have setup a new CentOS 6.6 server with Plesk version 12.0.18 and everything works as it should apart from the fact that in Filezilla the connection for domain1.com points to the httpdocs directory for domain2.com and vice versa. In the plesk filemanager and in a web browser the domains point to the right directory.
View 4 Replies View RelatedI have received notices from several customers with this error and I checked myself. When trying to connect to a ftp hosted on my server with Plesk gives an error expired certificate, a certificate of Parallels. The solution I've found is to configure access without TLS but says it is unsafe and customers are not satisfied.
View 1 Replies View Relatedmy clients are asking for ssh access, if I gave them ssh access, can they hurt server / other clients in any possible way?
View 14 Replies View Relatedsome clients on server couldn't access vb sometimes. this error occured
HTML Code:
[B]Forbidden[/B]
You don't have permission to access /vb/showthread.php on this server.
So I checked /usr/local/apache/logs/error_log and found this error
Code:
client denied by server configuration: /home/USER_NAME/public_html/vb/showthread.php
what does it mean, and How it was happened sometimes not all time?
Lately my users have been getting 403 and 404 errors for pages that are on the server and have the correct permissions. when I look in cpanel in the error logs I see the error:
Mon Mar 26 12:43:09 2007] [error] [client 216.x.x.x client denied by server configuration: /home/xxxx/public_html/acronyms.php
I have a client who's server has got DDOS attack. It causes the network disruption and DC wants to turn off the server. My client feels it stupid to turn off the server just like that.
can large attacks prevented server side?
i have linux.i want setup vpn server on this,and take several account vps to windows clients
how may?
i can`t use of openvpn
do you have another tools?
I would like to use VoloMP mailing software to send can-spam compliant optin message through a dedicated server - can anyone recommend a host?
View 4 Replies View RelatedI know that port 80 is reserved for HTTP communication to clients on the apache server,and that the client can receive the HTTP response to any port on the client machine, I think there might be more details to it than this. I am required to describe how client and server sockets are used for the client/server communication between an Apache Web server and Web client processes.
View 1 Replies View RelatedI am trying a webpage siremis whenever i try to login i am getting below error in error log of apache [client 192.168.137.7:4758] AH01630: client denied by server configuration: /opt/siremis-4.0.0/siremis/.htaccess
in httpd.conf following is the rule
Alias /siremis "/opt/siremis-4.0.0/siremis"
<Directory "/opt/siremis-4.0.0/siremis">
Options Indexes FollowSymLinks MultiViews
[code]....
i am using apache 2 and php 5.5.1 and mysql 5.6.12.
How do i setup vpn server on windows 2003 so that client traffic go through the remote vpn server? Something like strongvpn.com service which change the client ip address.
I tried setting up, now client able to connect to the server using windows vpn. But once connected, internet cannot work. How to use the vpn server as gateway?
Server have only 1 network card.
Can windows xp act as vpn server for the same purpose?
how to do this in myphpadmin
also got cpanel if it helps.
I've a Wordpress Blog on a Ubuntu 13.10 server with Apache 2.4.2.
For only one page on this site I've this error and can't find a solution.
I have completed email set up on my server and have checked that email ports are open, but for some reason outlook keeps returning : "Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that you DNS settings in the Network pane of System Preferences are correct."
The odd thing is that outlook still picks up emails if I receive any, but keeps returning above error every minute.
if there are any hosts you would recommend working with for hosting a DB app (MySQL or SQL Server is fine). The trick with many hosts is that the database is not made directly available to remote clients due to security reasons. What I'd like to do is provide the DB hosting for a client/server application we are developing. For many of these users, setting up and managing a database will be too complex, so I'd like to provide the hosting for them.
Additionally, we'll be starting small and will need room to grow -- probably up to fully dedicated hosting.
So -- any good experiences out there with this kind of hosting? It goes far beyond the usual specs of bandwidth, disk space, etc. into needing low server densities, high availability of the DB service, and most importantly, no plans to block remote access to DBs in the future...
How do I install/enable SOAP client on a Centos / Cpanel server?
be clear and detailed in the commands I must run and what directories I run them in.
i want to configure Apache so that it receives a client certificate, an passes it to another server.I'm using:
- apache 2.0.65 on windows
- the backend server is an apache-based solution (IBM HTTP Server)
I tried this config:
<VirtualHost *:443>ServerName apacheserver.domain.comSSLEngine onSSLProxyEngine onSSLCertificateFile "e:/Apache/Apache2/conf/server.cer"SSLCertificateKeyFile "e:/Apache/Apache2/conf/server.key"SSLCACertificateFile "e:/Apache/Apache2/conf/certca.cer"SSLVerifyClient requireSSLVerifyDepth 2ProxyPreserveHost onProxyRequests off<Proxy *>AddDefaultCharset
[code]....
I host a number of large sites (20GB+) on my VPS server running Centos6 and Plesk Panel 12. Due to the large sites I don't want to keep multiple backups on the actual server because it would take too much disk space. When I create a backup to the server's repository all is good, but when I click the green arrow to download the backup it takes a long time and then it fails with a timeout error. On some smaller sites it takes a while but eventually downloads the tar.
So my question: Is it possible to access the Server Repository via FTP? How and where would I set this up? Presumably it would be a better way to download these large archive files?
The last packet successfully received from the server was 60.410.682 milliseconds ago. The last packet sent successfully to the server was 60.410.687 milliseconds ago. is longer than the server configured value of 'wait_timeout'. You should consider either expiring and/or testing connection validity before use in your application, increasing the server configured values for client timeouts, or using the Connector/J connection property 'auto Reconnect= true' to avoid this problem.
View 2 Replies View RelatedI'm having a problem with PPTPD.
I can connect to the server fine but after connecting I cannot access anything other then the server's ssh.
I currently tried the following:
arp --set 192.168.11.100 5A:82:AC:3D:B9:FD pub
192.168.11.100 --> Client Allocated Address by PPTPD Server
5A:82:AC:3D:B9:FD --> MAC Address of PPTPD Server
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT
iptables -P INPUT ACCEPT
iptables -t filter -A INPUT -i ppp+ -j ACCEPT
iptables -t filter -A FORWARD -i ppp+ -j ACCEPT
Currently no luck at all.
My /etc/pptpd.conf:
######################################
# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#
# Changes are effective when pptpd is restarted.
######################################
# TAG: ppp
# Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
ppp /usr/sbin/pppd
# TAG: option
# Specifies the location of the PPP options file.
# By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd
# TAG: debug
# Turns on (more) debugging to syslog
#
debug
# TAG: stimeout
# Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10
# TAG: noipparam
# Suppress the passing of the client's IP address to PPP, which is
# done by default otherwise.
#
#noipparam
# TAG: logwtmp
# Use wtmp(5) to record client connections and disconnections.
#
logwtmp
# TAG: bcrelay <if>
# Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1
# TAG: delegate
# Delegates the allocation of client IP addresses to pppd.
#
# Without this option, which is the default, pptpd manages the list of
# IP addresses for clients and passes the next free address to pppd.
# With this option, pptpd does not pass an address, and so pppd may use
# radius or chap-secrets to allocate an address.
#
# delegate
# TAG: connections
# Limits the number of client connections that may be accepted.
#
# If pptpd is allocating IP addresses (e.g. delegate is not
# used) then the number of connections is also limited by the
# remoteip option. The default is 100.
connections 100
# TAG: localip
# TAG: remoteip
# Specifies the local and remote IP address ranges.
#
# These options are ignored if delegate option is set.
#
# Any addresses work as long as the local machine takes care of the
# routing. But if you want to use MS-Windows networking, you should
# use IP addresses out of the LAN address space and use the proxyarp
# option in the pppd options file, or run bcrelay.
#
# You can specify single IP addresses seperated by commas or you can
# specify ranges, or both. For example:
#
# 192.168.0.234,192.168.0.245-249,192.168.0.254
#
# IMPORTANT RESTRICTIONS:
#
# 1. No spaces are permitted between commas or within addresses.
#
# 2. If you give more IP addresses than the value of connections,
# it will start at the beginning of the list and go until it
# gets connections IPs. Others will be ignored.
#
# 3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
# you must type 234-238 if you mean this.
#
# 4. If you give a single localIP, that's ok - all local IPs will
# be set to the given one. You MUST still give at least one remote
# IP for each simultaneous client.
#
# (Recommended)
localip 192.168.11.200
remoteip 192.168.11.100-199
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
Code:
[root@* ~]# cat /etc/ppp/options.pptpd
##########################################
# $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $
#
# Sample Poptop PPP options file /etc/ppp/options.pptpd
# Options used by PPP when a connection arrives from a client.
# This file is pointed to by /etc/pptpd.conf option keyword.
# Changes are effective on the next connection. See "man pppd".
#
# You are expected to change this file to suit your system. As
# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
#########################################
# Authentication
# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd
# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain
# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.)
# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
# {{{
refuse-pap
refuse-chap
refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
require-mppe-128
# }}}
# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
# {{{
#-chap
#-chapms
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
#+chapms-v2
# Require MPPE encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
#mppe-40 # enable either 40-bit or 128-bit, not both
#mppe-128
#mppe-stateless
# }}}
# Network and Routing
# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients. The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.
#ms-dns 10.0.0.1
#ms-dns 10.0.0.2
# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients. The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4
# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system. This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp
# Normally pptpd passes the IP address to pppd, but if pptpd has been
# given the delegate option in pptpd.conf or the --delegate command line
# option, then pppd will use chap-secrets or radius to allocate the
# client IP address. The default local IP address used at the server
# end is often the same as the address of the server. To override this,
# specify the local IP address here.
# (you must not use this unless you have used the delegate option)
#10.8.0.100
# Logging
# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
#debug
# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump
# Miscellaneous
# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock
# Disable BSD-Compress compression
nobsdcomp
# Disable Van Jacobson compression
# (needed on some networks with Windows 9x/ME/XP clients, see posting to
# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
# [url]novj
novjccomp
# turn off logging to stderr, since this may be redirected to pptpd,
# which may trigger a loopback
nologfd
# put plugins here
# (putting them higher up may cause them to sent messages to the pty)
I just got my first dedicated server, and Im wondering what SSH Client people are using?
View 14 Replies View RelatedOpened this to help ppl, and to let them know which one is popular and why.
I know some clients and putty is one of them.
Would like to know you guys opinion which one is safe to use. and why.
I thought Putty was the best but after I tried SSH Explorer I discovered there are better SSH apps
So what is the best SSH client?