Download Free, Up-to-date HyperVM OS Templates For OpenVZ And Xen Here!
Mar 10, 2009
I have recently created a bunch of OS templates for HyperVM as their current set were hugely outdated / unsuitable.
The images tagged modernadmin all include preconfigured DenyHosts to prevent SSH brute forcing of your customers VPS.
Available are the following for OpenVZ:
centos-5.2-i386-hostinabox-modernadmin.tar.gz530,147.2KB
centos-5.2-i386-modernadmin.tar.gz109,654.2KB
centos-5.2-x86_64-modernadmin.tar.gz134,665.8KB
debian-4.0-i386-modernadmin.tar.gz61,153.3KB
debian-4.0-x86_64-modernadmin.tar.gz143,096.5KB
debian-5.0-i386-modernadmin.tar.gz75,740.6KB
debian-5.0-x86_64-modernadmin.tar.gz159,226.4KB
fedora-core-10-i386-modernadmin.tar.gz165,429.6KB
fedora-core-10-x86_64-modernadmin.tar.gz174,693.8KB
ubuntu-7.10-i386-modernadmin.tar.gz76,415.5KB
ubuntu-7.10-x86_64-modernadmin.tar.gz76,133.2KB
ubuntu-8.04-i386-modernadmin.tar.gz70,725.7KB ...
Since OpenVZ offers both base RAM and burstable RAM to VMs, checking how much RAM is still available for assigning to VMs is still done manually by me.
Is there a way to list the total amount of base RAM that has been assigned, and the total amount of burstable RAM that has been assigned, so that you know how many more VMs you can create/host on a server?
I am trying to create some vps using openvz but after creating the vps with the Centos basic template 304mb i can't ping the ip and i can't view the centos welcome page in my browser (using ip and not domain, so i don't need to change there anything yet) and the most important is that i can't connect to the vps using ssh
I aks for many good users about my problem but i don' found a solution yet.
I ask my DC about ip's and they told me that the ip's are routed in my server.
When you're creating VPS container, you can ssh with that IP and login with your username and password correct? But, what is the problem when I successfully created a VPS, and when trying ssh into it, I can't. Ok, here we go. I want to create a 2nd vps and will be using it as my DNS server. I enter a set of IPs into HyperVM's IPpool. First IP: x.x.x.178 Last IP: x.x.x.182 Resolv Entries (space Separated) : Gateway (IP): x.x.x.x.177 NetMask: 255.255.255.248
Then I created a vps resource plan. And then I created a VPS and it use the first IP from above. I want to connect to SSH and want to make it as my DNS server but seems the IP are not responding, it wasn't even live. So, what is the problem here? Where I did wrong? Just to let you know, I successfully created 1 VPS before that and it works without any hiccups. Got even whm/cpanel installed as well on it. The thing that I suspected is that my DC pulled the IPs off me and assigned them to other server. Waiting for their reply on this though.
As a provider of Virtual Private Servers im looking at ways to expand our business, I love the fact that we can offer our clients such a good service with the low price we presently charge but as a "Client" or "Potential Client" what would your views be on Virtuozzo?
Is it worth our business cutting our already low profits and going with Virtuozzo as our VPS Control Panel?
This is something we are very interested in doing and we feel it would be a big jump from the very low-end budget HyperVM/OpenVZ Approach.
Your Views on the Virtuozzo Vs HvM/OvZ would be very helpfull.
Would you rather buy a low priced Virtozzo VPS or an even lower priced HyperVM powered VPS? Im quite lost as to wether the financial investment would be worth it, I don't see how it wouldnt be as HyperVM is very buggy and really doesnt give a full sense of security in my personal opinion.
I need to move a slave server from one master to another, but when running "import HyperVM VPS" I get the classic error:
Quote:
Alert: The vpsid 470 : localhost exists on another server.
Please confirm exactly how to change the VPS ID for an OpenVZ VM as I've gone through all the LxLabs posts dealing with this subject and none of the proposed solutions work correctly.
Does anyone know how you can move an entire HyperVM (OpenVZ) Node to Virtuozzo. What has to be copied because we tried coping /vz/private/<VEID> and /etc/sysconfig/vz-scripts/<VEID> and we were not able to get the VE to start. We were getting an error:
Starting Container ... Can't mount: /vz/template:/vz/private/1110 /vz/root/1110: No such file or directory Container start failed
We tried rebooting the server as some other sites mention but still no luck. Any help is greatly appreciated because when we contacted Parallels they did not seem to have answer. (we are still waiting on a ticket reply though)
I had my box reinstalled with same OS as before, Centos x64. I am creating a NEW VPS and assigning it an IP from my Extended network (not primary) and the IPs are not pingable as if GATEWAY= was missing from the ifcfg config on network-scripts.
Its becoming more and more difficult to manage VPS using HyperVM and I am personally sick of the control panel design.
So does anyone have any great ideas to move all the VPS in HyperVM (OVZ) to Virtuozzo (PIM)?
If there isn't, I think I'll have to move all data across the orthodox way - which I clearly want to avoid.
PS: OVZ is on a different node from the VZ (duh!) but also will be utilizing different IP ranges. So, I think I need advice on changing IPs of the VEs too.
In the last two weeks I have noticed a major issue concerning memory usage. HyperVM and Top (via console) report two very different amounts of memory being used. On a fresh rebuild, my overall usage should be no more then 22mb. However, HyperVM reports 45mb whereas Top reports 11mb. Notice the huge gap?
I was told by my VPS host that OpenVZ / HyperVM is to blame. The overwhelming issue is: if I pay for 256mb of ram and I'm being cut short, then I'm obviously over paying. What's more: how can I tell whether or not I'm being cut short?
Has anyone run across these problems in the last two weeks?
My company currently have some spam filtering problem with mailscanner and the Windows team was given a project to come up with a better solution to fight spams.
I work in Unix dept. I suggested to Windows admin I use ASSP personally and works great. I gave them the specs on my setups. Since the current front-end proxy is on RHEL, we all settled to try out ASSP on Ubuntu based server.
We scrap-find an older Dell PE 2850 we can use. I finally convinced company to deploy OpenVZ, this will be our first OpenVZ server public facing.
The Dell have two Intel 82541GI Gigabit NICs. We are VLAN-ing on Cisco switch level; eth0 will be on internal 10.0 network and eth1 on public port.
I already installed CentOS 5.2 plus HyperVM. I configured and brought up eth1 without TCP/IP, just on layer 2. Looks like OpenVZ is using eth0 right now.
For this new proxy, will be routing traffics through host eth1. What's the best way of going with this? The new proxy will be using veth so it will have its own MAC (for security reasons; and network team said this is mandatory).
Should I be using bridging? Or simple routing guests through VZ configured eth1 would work? Can anyone give me some ideas? I'm asking in WHT is because a lot of hosting companies probably have this setup already. I'm just absorbing ideas...
Anyone of the top of their head know how to fix the CPanel "Unlimited" Quota problem in CentOS/OpenVZ/HyperVM?
This post is not related to Infinitie, I personally have a few VPS servers I run and they are on CentOS 4.6 and the latest HyperVM, secondary quotas is enabled but I still keep having that problem where I cannot get quotas.
We're in the process of setting up our new VPS Server, and we can create a VPS with 256MB memory and with 512MB memory fine, but when creating one with 1GB memory, we get the error:
Could Not Start Vps, Reason: Unable to fork: Cannot allocate memory: Not enough resources to start environment: Container start failed:
Even though the server has 4GB RAM and no other VPS's running. Any ideas? Thanks.
[Edit]We now seem to get the problem for all our VPS's. I think it may be something to do with the Server not unallocating the memory, as we've provisioned and de-provisioned quite a few Servers
Does anyone know why you have to specify the Disk Space in both the Cleint area and also the Domain area within Plesk? Also for one client I have specified 250MB, but in the email user it says 'unlimited' any ideas?
I am trying to find some host scripts or templates (php or flash) with the popular host features such as host plans, tickets, live-chat, client area, paypal payments, ... etc.
Do you know if such complete host script is exist, if so where I can find it (with reasonable prices).
I will modify the script to fit my needs but I just want a complete script to start with.
how you can make OS Templates. I do not want to have to isntall cPanel everytime I setup a new VPS and I can not seem to find anywhere that shows how to make a OS Template.
Does anyone have a copy of these o/s templates we can download please? That would be appreciated. I have no expertise in compiling my own unfortunately.
I'm in a unique position (friend of a business owner) to provide a hosting company between 50 to 1000 new clients who need a domain name, yearly hosting and a 1 or 2 page website that clients can edit and customize to a limited amount (color, main body text and headers and some graphics within body). A basic template with graphics and text would be provided, just need the backend for the clients to customize certain things.
I'm new to the hosting scene, so I'm not sure of any exsisting hosts that offer this.
I'm sure some of the big hosting companies offer something similar like godaddy.
However we are looking for a hosting company that we can recieve residual referral monies from these clients we sign up. I guese if someone offers a reseller account with all these features, then we charge our clients whatever we want. I am just looking at options right now to research and provide suggestions to my partner.
I am trying to set up a client template using Plesk, the Maximum I want to give the user is 250MB space and 2000MB bandwidth... I was wondering if anyone else who know Plesk could give some helpful ideas on what other options would be useful for the customer?
Last week my brother puchased a CD which promised contains thousands of unique templates through [url]
He sell it locally for Indonesia market and leave no contact info.
He showed me and I'm surprised that what did guy did is copied from all sources included templatesmonster.com majority which is available alot of through the net (example: [url]burn it into CD and sell it illegaly.
I reported the site to hostgator.com and got the followin reply: ---------------------------------------------
Hello,
Since there are no templates on the site, you will need to provide evidence of this some how.
Regards, Richard F. Network Security Administrator ISP Blacklist Administrator/Level 3 Systems Administrator PGP Key: [url] ---------------------------------------------
I'm not trying to bash HG, but I need your opinion: is the HG respond is already correct?
So learn from the same thing, if I set a website sell cracked properties and only delivery the product through CD or email (not downloadble one) I can host it with HG as long as no offensive files in their server? Or in this case HG just ignore it because could not understand Indonesia languange?