Dell Powerconnect 6224 Reboot´s When Use ISCSI
May 15, 2009
I´m running a Dell Powerconnect 6224 with firmware 2.2.0.3 for a customer.
After upgrade to firmware 2.2.0.3 from the version 2.0.0.12, and starting to use ISCSI with link aggregation groups, the switch began to reboot every 2-3 days.
Now, i have disabled LAG and this issue also happen.
It could be a firmware problem? Really, with firmware 2.0.0.12 it was solid as rock but without a advanced usage such as vlan, link aggregation, IP routing...
I´m not sure if my customer would like pay more and choose a more stable switch such as Cisco Catalyst...
View 8 Replies
ADVERTISEMENT
Sep 7, 2007
As I mentioned in a previous thread, I'm doing research on Foundry alternatives and one of the leading contenders to replace our FESX 424s is the Dell Power Connect 6224.
I've read a couple case studies and gone through the tech specs, etc., but I'd like to hear some real-world feedback from anyone that has deployed the 6224(or 6248) on their network, especially in a data center environment. How well has the switch performed when taxed, how well does it operate in a multi-vendor environment, and so on?
View 3 Replies
View Related
Jan 22, 2008
I just got this managed switch and I've got it to work, no doubt. It's getting ips from my 100mbps router, which is 12.11.0.1/24.
1. How do I access the web-based managed switch? I can't find anywhere in my router under the "attached device" menu...
2. My switch is 1gbps, but not my router. My servers connected to the switch also have 1gbps nic cards, can it do 1gbps between servers (internally) or it's limited to 100mbps because of the router?
View 12 Replies
View Related
Apr 29, 2008
Does anyone use Dell PowerConnect Switches?
If so please list what model number you use and your thoughts as compared to Cisco switches.
Once again I would like model numbers you are using.
View 14 Replies
View Related
Jun 26, 2007
if I can use this as a router as well? which means, if I plug a computer into it, will it give me 192.168.0.1? The specs info on the dell is a little confusing for me...
The whole situation is I have 10 windows xp, and we want to setup an internal LAN with dhcp capabilities from the router/switch...
View 9 Replies
View Related
Oct 17, 2007
Will a Perc 5 raid card work in a non-dell Linux server? These cards can be found for about $100 on eBay, and are much cheaper than the Adaptec cards with similar features and ports.
View 5 Replies
View Related
Aug 21, 2007
PowerEdge SC1435 Dual Core AMD Opteron® 2212; 2.0GHz,2X1MB Cache,1Ghz HyperTransport 143G20 [222-6400] 1
Operating System No Operating System NOOS [420-6320] 11
2nd Processor Single Processor Only 1P [311-3928] 2
Memory FREE UPGRADE! 2GB, 667MHz, 4x512MB Single Ranked DIMMs 2G4D6P [466-7879] 3
TCP/IP Offload Engine Enablement Broadcom® Dual Port TCP/IP Offload Engine Not Enabled NTOEKEY [430-1765] 6
PCI Riser Riser with 1 PCIe Slot PCIE [320-4982] 7
1st Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive 80S2 [341-3801] 8
Primary Controller Onboard SATA Controller - No RAID OBSATA [430-1949] 9
Network Adapters On-Board Dual Port Gigabit Network Adapter, No TOE OBNIC [430-2008] 13
CD/DVD Drive No CD/DVD NOCDDVD [313-3924] 16
Bezel Bezel FRTBZL [313-4477] 17
System Documentation No Hard Copy Documentation, E-Docs ONLY and OpenManage CD Kit EDOCS [310-8261] 21
HD Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - NO RAID MST1 [341-3957] 27
Chassis Configuration No Rack Rails Included NORAIL [341-3089] 28
Hardware Support Services 1Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite U1OS [980-9530][985-5117][985-9057] 29
Installation Support Services No Installation Assessment NOINSTL [900-9997] 32
Power Cords Power Cord, NEMA 5-15P to C14, 15 amp, wall plug, 10 feet / 3 meter WAL10FT [310-4450] 38
why do Dell's none dell rack rail cost $249? Can i buy the rail for dell from ebay? i saw a dell rail cost only $140 on ebay.
View 5 Replies
View Related
Mar 3, 2007
I am trying to learn more about storage solutions over Ethernet. There are iSCSI (internet SCSI) and AoE (ATA over Ethernet). Certainly the AoE is a cheaper solution. Besides pricing, what are the advantages (and disadvantages) of each?
View 10 Replies
View Related
Aug 10, 2009
we are setting up a couple of servers for a clients application which will have 2 x 1U application servers running XenServer 5.5 and one NFS or iSCSI server (Dell 2950, Raid 10) running ether just Linux with NFS or Openfiler with iSCSI.
Would there be any benefit in running iSCSI vs. NFS considering their is no iSCSI accelerator and this is just a regular Server ?
NFS is simple but is it's performance really that much different than iSCSI in this scenario?
The network will be used by up to 12 user.
View 14 Replies
View Related
May 23, 2008
I'm colo'ing, so this wouldn't be shared with anyone else.
I'm looking at using iscsi with Virtuozzo Containers, and while the setup for the hardware nodes seems fairly straightforward, can anyone comment on their own experiences using iscsi with VZ?
Did you find your experience reliable? Slow? Any information will be useful.
Also, did you have a hard time setting things up? Or did VZ just manage everything as if it was still on a single server?
View 5 Replies
View Related
Jul 27, 2007
Thinking of putting together a ISCSI box with 14 sata II 750's, 3Ware sata controller (raid 6) and Intel quad port gigabit card ganged together for 4 gig transfer and tieing it all together with Open-E ISCSi or DSS module.
Anyone done something similar with good (or bad) results? Thing of using this for hosting web sites primarily as well as some storage for mail server and some databases. Servers running raid 1 and using MS iscsi initiator. Have a vlan setup just for iscsi traffic in my 48 port gigabit switch.
Are the TOE cards better to have or is the MS Initiator good enough. Plan on using the second NIC on the servers solely for ISCSI transfer.
View 14 Replies
View Related
Mar 23, 2008
Has anyone here tried the Dell/EqualLogic PS5000 series iSCSI SANs? Any opinions on them? I'm looking to use two in a VMWare ESX cluster.
Also, does anyone have any more specific pricing than the 'starting at $19,000' that's been banded around the internet? I have an EqualLogic sales person visiting my offices in a week but would ideally like to get some rough pricing before then (eg: the price difference between SAS and SATA). Trying to get prices out of Dell hasn't been easy so far.
View 4 Replies
View Related
Feb 6, 2008
I setup an iSCSI target and two iSCSI initiators but I am having some trouble sharing the storage.
I partitioned the drive when I used the first initiator, a 1TB partition, I mounted it without any issues, it showed up in df -h.
Now I went to mount the iSCSI target on the second initiator, I mounted it fine, the partition I made on the first initiator was recognized on this one, however when I add files to either or, the changes aren't recognized on the other initiator. Any ideas why this might be?
I put 1GB of files in one initiator and I ran the df -h command on the other, and it still had the same amount of free space.
View 5 Replies
View Related
Feb 15, 2008
if anyone had any good recommendations for iSCSI products, either software or appliances for the small business market. We need good low cost SAN storage. I am looking at Nimbus and Open-E.
View 8 Replies
View Related
Feb 2, 2008
I´m thinking about using a centralized hosting solution, in order to achieve better redundance and performance while having more room to expand if necessary. In order to achieve this, I was thinking about implementing a storage server, and use a software to provide iSCSI target capabilities.
As storage server, I was thinking about using HP DL320s ( URL ), loaded with 12 147GB SAS HD´s 15K RPM. I will make some tests to understand the real difference between RAID5 and RAID10, concerning write speed. Also, I´m not sure if the controller provided with this server is good enough to provide a reliable operation.
For switching, I will use HP 2824 or 2848 Gigabit switch, and use port trunk in order to join both NIC controllers of the storage server.
As iSCSI target software, I still don´t know wich one to use. I think FalconStor would be a good bet, however it seems to be a bit expensive. Any good alternative?
This storage server would be used to provide storage for about 10 "regular" hosting servers, that have, at the moment, regular dual 10K SATA Drives (Raptor) in RAID1. I'm afraid the 2x Gigabit ports aren´t enough, even considering that I will not have intensive sequential reads / writes, but random acceses.
View 14 Replies
View Related
May 18, 2008
I own a server running Helm 3 with about 300 domains.
Im looking for a backup solution to backup my whole server (MSSQL, MySQL, DNS, IIS, Registry, Mail etc...)
What's the best soltutions ? Evault or ISCSI of [url]
View 1 Replies
View Related
Oct 5, 2008
I'm currently connecting one of my servers to an iSCSI SAN but would like to hook up another server to that target as well. However, this doesn't work with NTFS filesystem and I couldn't really find any windows solutions for that. Does anyone have experience with this?
View 5 Replies
View Related
Sep 14, 2009
I have a couple of Dell 1950s and in one of them, I have 2x Seagate 15K.5s that I purchased through Dell and I also have a spare sitting in my rack in case one goes bad, also from Dell.
I was going to be repurposing one of my other 1950s and was going to get two more 15K.5s for it, but wasn't planning on getting them through Dell (rip off?). This way, could still keep the same spare drive around in case a drive went bad in that system as well.
When I was talking to my Dell rep recently when purchasing another system, their hardware tech said you can't use non-Dell drives with Dell drives in the same RAID array because of the different firmware between them.
Anyone know if it is true? Anyone have any experience with using drives from Dell in conjunction with the same model drives from a third party retailer?
View 1 Replies
View Related
Mar 27, 2008
Does anyone have experience comparing the two? Any comments on why one would be better over the other?
View 7 Replies
View Related
Oct 2, 2007
why don't you buy servers from big guys like HP and DELL? Are they too expensive, or servers are not as good as suposed to be, or something else?
Our company is buying all our computers and printers from HP, we are receiving great customer service, waranty, if something gets wrong - we had computer replaced-no problem!
Maybe some small local guys are selling cheaper and better equipment, but I have peace of mind.
View 14 Replies
View Related
Jul 22, 2009
I know this topic has been brought up before and I wanted to revisit this again. We are a growing hosting company looking to expand our Dedicated server offerings. So far, we have been renting servers and reselling but now we have begun colocating our equipment and are looking for hardware vendors.
Would you recommend us to...
...build our own servers using the Supermicro platform?
...purchase pre-built servers from Dell?
...purchase pre-build servers from HP?
Pricing is of major concern along with speed to provision new orders. Although we don't have a dedicated resource for putting together servers, this is something we can look into should the volume of orders increase. Scalability and Flexibility is a MUST
Thanks for chiming in...
View 11 Replies
View Related
May 30, 2009
The technical level in our org is quite low.
We would like some advice on the difference between
1. Supermicro PDSML-LN2
[url]
2. DELL PowerEdge R200
[url]
3. HP Proliant DL120
[url]
Some web hosts here in Singapore are leasing them at comparable rates.
Our research shows that the Dell and HP are comparable and the SuperMicro appears to be in a different (lower) class.
How can the servers be leased at comparable rates if they are from different classes?
View 14 Replies
View Related
Jul 9, 2008
I'm thinking about purchasing a Dell PowerEdge 860 and use it as a web server. I need your guy's inputs on what you guys think of this server regarding the quality, performance, & price.
This server retails for about $420 + s/h.
Here are the specs:
PowerEdge 860 Intel® Celeron® Processor 430 at 1.8GHz, 512K Cache, 800MHz FSB
Operating System No Operating System
Memory 512MB DDR2, 667MHz, 1X512MB Single Ranked DIMMs
Riser Card Riser with 2 Slots: 1 PCI Express x8 slot and 1 PCI Express x4 slot
Primary Hard Drive 80GB 7.2K RPM Serial ATA 3Gbps 3.5-in Cabled Hard Drive
Primary Hard Drive Controller Onboard SATA Controller - No RAID
Network Adapter On-Board Dual Gigabit Network Adapter, No TOE
CD/DVD Drive No CD/DVD
Bezel Bezel
Documentation Electronic Documentation and OpenManage DVD Kit
Hard Drive Configuration Onboard SATA, 1 Drive connected to Onboard SATA Controller - No RAID
Rack Rail Options No Rails Included
Hardware Support Services 3Yr BASIC SUPPORT: 5x10 HW-Only, 5x10 NBD Onsite
Installation Support Services No Installation Assessment
Power Cords Power Cord, NEMA 5-15P to C13, 15 amp, wall plug, 10 feet / 3 meter
I know this is a newbie question but with the specs above on the server, will this server be working right out of the box (equipped with PSU & other neccessary equips.) and ready for installtion of linux servers?
View 14 Replies
View Related
May 25, 2008
Got a Dell PE 2650 that I sold last week, the guy who has bought it wants the RAC (remote access controller) working on it. Unfortunately I don't have the password for it, in order to log it on, rendering it useless.
Is there any way to reset this password? I've tried resetting BIOS and that didn't work (I believe it's on a separate system)
View 3 Replies
View Related
Apr 8, 2008
we would buy the new PE R300 but for now the Drac5 not is yet available but we could buy it as external kit, someone have try it with R300? any issue?
View 0 Replies
View Related
Apr 18, 2008
I have not read the Dell return policy in a long time as it was an acceptable 30 days for the most part and no restocking fees.
Its going to be difficult ordering new servers that we have not previously experienced with their now 15% restocking fee.
[url]
View 14 Replies
View Related
Apr 26, 2007
configuration on Supermicro hardware and dell hardware, the pricing is pretty much the same 100+/- so thats not an issue.
But I am having a hard time to decide if I should go with supermicro or dell.
But here are the points which I have in mind.
- As far as dell goes, there is a central place for support, for example, if I have any issues, I know who to call exactly and get the issue solved, no resellers involved. If I go with supermicro and buy the hardware from a 3rd party, I dont know who to go to for support say a Motherboard fails or if I have any other questions, should I ask Supermicro themselves or the reseller?
- Has a DRAC card which I've heard is much more powerful than IPMI and I've heard Supermicro has no hardware for remote management as powerful as DRAC, I dont know how true that is.
- If I need any parts I know where I have to go to order them and what exactly to order since they have specific parts for specific server models, I dont know about supermicro.
I know, most of my points are benefiting Dell. But I've heard from the research that Supermicro hardware use less power and have less hard drive failures than Dell Servers, I dont know how true that is.
View 14 Replies
View Related
Jan 6, 2007
i notice the Dell do not configure the on board SATA to any RAID unless you purchase add on RAID adapter.
does this mean you can't configure it yourself? do dell poweredge onboard SATA controller support any RAID at all? do dell allow you to configure it yourself or you must purchase the add on RAID adapter?
View 4 Replies
View Related
Jul 26, 2009
how to add additional HDD on Dell M-series blade server. What i have seen till now is that only 2 HDD space is available on those server, i would request expert opinion on this issue. Experienced users please share your views or how did u guyz solve this issue.
View 4 Replies
View Related
Jun 9, 2009
trying to configure this thing, the software on Dell's site (IT Assistant) is what they tell you to use however it wants to scan the network looking for the device. This won't work because I bought this off ebay and god knows what it is set for right now. What is the easy way to reconfigure and talk to this card? Newer DRACs have a boot time config
View 3 Replies
View Related
Oct 5, 2009
Just wondering what is your preference when choosing a vendor based server as a provider? Do you go with Dell? HP? IBM? Or another vendor to offer to your customers? What are your reasons for using the brand you do?
View 4 Replies
View Related
