I am wondering if there is an easy way to convert apache to nginx on my Plesk 12 server. Ideally, I would like to save all my hosts without having to re set them all up. I have been searching online, but haven't found a simple way to do so.
View 1 RepliesHow to convert apache rewrite rule to nginx:
RewriteEngine on
RewriteBase /
RewriteCond %{REQUEST_FILENAME} !-f
RewriteCond %{REQUEST_FILENAME} !-d
RewriteRule ^naujienos+ news.php/$1 [L]
RewriteRule ^naujienos/p(.*)$ /news.php?pg=$1 [nc]
RewriteRule ^naujienos/?$ /news.php [nc]
RewriteRule ^naujienos?$ /news.php [nc]
at Lighttpd, and after trying for 2 hours to convert/rewrite apache's rewriterule into Lighttpd format, I became extremely confused.
Here's what I have in apache's rewriterule:
Code:
RewriteCond %{IS_SUBREQ} ^false [NC]
RewriteCond %{HTTP:Authorization} ^basic [NC]
RewriteCond /root/to/a/folder/%{REMOTE_USER} -f
RewriteRule (.*) http://www.domain.com/your_username_is_blocked.html
I'm facing problem with latest Apache 2.4.9. Previously we used Apache 2.4.7 ​version which supports DER SSL certificates. But Latest Apache(2.4.9) is not working with DER SSL certificates. I have to convert DER certificate to PEM format to start the Apache server. Am i missing anything ? Is DER certificate not supported in Apache 2.4.9 ?
View 6 Replies View RelatedHere is the comparison between Apache and Nginx. Request processing overhead and real-world application performance measurements included.
[url]
I am doing my web like this:
1) nginx listening at port 80
2) apache listening at port 78
3) nginx throws all shtml pages to apache
they are working perfectly, except one small thing:
I don't want any public visitor may visit port 78 directly, for now, both:
[url]
[url]
are working for visitors.
Anybody knows how to block/hide port 78 to the public access?
my nginx config snippet:
Code:
location = /index.shtml {
proxy_pass [url]
}
my apache2 config snippet:
Code:
Listen 78
If I make apache as follows:
Code:
Listen 127.0.0.1:78
I will get 502 bad gateway when I visit:
[url]
According to the latest trend and technological advances, which server software should people go with from the very beginning. Which do you recommend as on today?
btw anybody has experience with all 3 (apache/nginx/litespeed) webservers?
I have -
On a common shared environment, I started off with Apache - was fine until some load started generating and it became crapache.
Then litespeed - Totally awesome, could seriously feel the difference, but its cost is something not everybody can afford.
Then nginx - Very nice, felt like litespeed only, the only difference was it got quite complex in configuring it at a later stage BUT its free'ness made me love it badly.
I have a VPS running Parallels Plesk 12.0.18 Update#36 and CentOS 6.6. I'll like to move (if it's possible uninstall complete) Apache and let Nginx to manage all the request coming from outside.
View 4 Replies View RelatedWe'd like to use this tool from Google on our Plesk server: [URL]
is it useful getting these tools going on server, and are they worth it?
Whatever i try to modify configuration there is no way i can get file delivered by apache or NGINX to be deflate/gzip compressed.
OS: Debian 7.7
Plesk version: 12.0.18 Update #33
I've tried to add these lines to Nginx (Vhost directives) but it change nothing :
# Gzip Settings
gzip on;
gzip_buffers 16 8k;
gzip_comp_level 4;
gzip_http_version 1.1;
gzip_min_length 1100;
gzip_types text/plain text/css text/xml text/javascript application/x-javascript application/x-javascr$ application/xml application/xhtml+xml application/xml+rss;
gzip_vary on;
gzip_static on;
gzip_proxied any;
gzip_disable "MSIE [1-6].";
I also tried to disable Nginx and configure deflate in apache with following lines (Vhost directives then in a file in apache2/conf.d) but it is the same ...
<IfModule mod_deflate.c>
# Force deflate for mangled headers developer.yahoo.com/blogs/ydn/posts/2010/12/pushing-beyond-gzipping/
<IfModule mod_setenvif.c>
<IfModule mod_headers.c>
SetEnvIfNoCase ^(Accept-EncodXng|X-cept-Encoding|X{15}|~{15}|-{15})$ ^((gzip|deflate)s*,?s*)+|[X~-]{4,13}$ HAVE_Accept-Encoding
RequestHeader append Accept-Encoding "gzip,deflate" env=HAVE_Accept-Encoding
[code]....
I am a non-tech person trying to configure Nginx to serve static content (apache will remain on port 80 for the dynamic stuff).
Nginx is already installed, what I need is a workable configuration file for nginx so that it serves all static stuff (images and a few folders with static html) and instructions in how to create it. The server is running DirectAdmin panel, Apache 2.24, PHP 5.23 and XCache 1.2.
I want to pass the X-SENDFILE header to apache through nginx.
Is this possible or do i have to disable the reverse proxy?
I'm transferring my website from Linux to Windows Server 2008 and I'd like to use IIS.
The problem is I have pretty complicated .htaccess file with complicated URL rewrite rules and redirections in it.
I mostly work with cPanel/WHM but, I have to work with Plesk for just one client of mine. He's on Plesk becoz I came to know Plesk worked better on 256MB VPS than cPanel in the early days. Hence, on my recommendation, he is on Plesk on a 512 MB Memory VPS till now for all these years.
I wonder how tedious it might be to convert from Plesk to cPanel? The client basically uses Joomala + vBulletin and runs forums as of now.
Also, which CP will perform better on 512 MB VPS - Plesk or cPanel.
I am currently using phpdotnuke for a site, and have a forum linked to it supplied by activemodules.com. I would like to move to a non-cms site and something like vbulletin, so want to convert the forum db from MSSQL to MySQL - and hopefully keep all the posts and login data!
As a complete novice to that process, is there any pointers out there in terms of reading material, non-command line software etc I can use? Has anyone done this conversion, and what are the dangers?
I have 465 emails in .mbox format:
1180056800.000448.mbox_2,S
and inside:
Quote:
Return-Path: <<removed>>
From: <<removed>>
To: <email-address@gmail.com>
Subject: the subject- disregard
Date: Mon, 18 Dec 2006 15:16:05 -0500
Message-ID: <CCBC5E16-6FEC-49DB-AEF6-3B9131F688C3@verizon.net>
MIME-Version: 1.0
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Apple Mail (2.752.3)
Thread-Index: Acci4VFHa4z1GsINTFy0kBgEiy1OFA==
X-OlkEid: 3E245E20C77FC375020B624294176339C7BA73C1
Status: RO
X-Status:
X-Keywords:
X-UID: 453
Sorry - user error!
I didn't get that the screen wasn't going to say anything. Followed
directions again. WOrked just fine.
how to convert cPanel/WHM version from RELEASE to STABLE with latest version
View 4 Replies View RelatedI am trying to figure out how to do a setup to convert socks to http.
I have an application which only supports http proxy. I am using putty to perform ssh tunneling but I guess I can only use that as a socks connection.
I have a vbulletin (3.7.2) board with many mods installed (nearly 70) without a problem.
However, upon installing one new mod I got a database error stating:
MySQL Error : Illegal mix of collations (latin1_swedish_ci,IMPLICIT) and (latin1_general_ci,IMPLICIT) for operation '='
How do I change ALL tables in one shot (or sql query via phpmyadmin) from the two different collations to utf8?
Also, is utf8 suggested or better than latin1?
How do I go about converting the follow .htaccess file
Code:
RewriteEngine On
RewriteBase /
RewriteCond %{REQUEST_FILENAME} -f
RewriteCond %{REQUEST_FILENAME} /blogs/(clientscript|images)/
RewriteRule ^(.*)$ $1 [L]
RewriteRule ^blogs/([-a-z0-9] )/([-a-z0-9] )-([0-9] )/comment-([0-9] ).html blogs/viewblog.php?username=$1&entrytitle=$2&entry=$3&c=$4 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/([-a-z0-9] )-([0-9] )/feed/ blogs/syndication.php?entry=$3 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/([-a-z0-9] )-([0-9] )/ blogs/viewblog.php?username=$1&entrytitle=$2&entry=$3 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/category/([-a-z0-9] ).html blogs/viewblog.php?username=$1&categorydata=$2 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/([0-9]{4})/([0-9]{1,2})/ blogs/viewblog.php?username=$1&month=$3&year=$2 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/([0-9]{4})/([0-9]{1,2})/([0-9]{1,2}).html blogs/viewblog.php?username=$1&month=$3&year=$2&day=$4 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/archive.html blogs/viewblog.php?username=$1&displaymode=archive [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/feed/ blogs/syndication.php?username=$1 [QSA,L]
RewriteRule ^blogs/([-a-z0-9] )/ blogs/viewblog.php?username=$1 [QSA,L]
to work with lighthttpds rules?
I have server that has a SINGLE customer on it - this is not economical to run under PPA - how do I remove it from the PPA management and not disrupt the current site/email on it?
The plan is to run it on webmin - there is no way it can justify PPA for 1 site.
I have a website that was running fine for a month or two until my host recently changed some settings on the server, and now it shows a bunch of errors. I contacted the host and they said >
"To avoid the errors, please do not use disabled function. If you need such functionality, you can have your own php.ini on your root http folder containing only necessary option"
Since I'm not a programer, I have no idea what they're talking about. So, I asked them how to do that, they're reply of course was>
"Please consult with the script writer on how to convert ini_set function in your code to php.ini seting. As the script is not encrypted, you can do it with commenting all ini_set calls and write a substitute on php.ini (Create php.ini file in webroot folder)."
I tried to contact the developer, but it appears he has gone MIA! So, now I am left with no clue how to fix the website, so I turn to you guys!
The website is [url]. You can see the errors in the header, but I'll post them here as well>>
"Warning: ini_set() has been disabled for security reasons in /home/buymydom/public_html/includes/global.php on line 3
Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/buymydom/public_html/includes/global.php:3) in /home/buymydom/public_html/includes/global.php on line 32
Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/buymydom/public_html/includes/global.php:3) in /home/buymydom/public_html/includes/global.php on line 32"
My question is, How do I convert ini_set function in my code to php.ini?
I've got a customer that has a website at hisdomain.com . He created a subdomain called dev.hisdomain.com for the new version of his website. Now he wants to take it live. Had he created dev.hisdomain.com as a subscription instead of a subdomain, it would have been easy to "rename" the old site to old.hisdomain.com and then rename the new site to the current name.
Am I going to have to move all the files around at the command line or is there an easier way to switch around the sites? The server in use is CentOS 6.6
I thought that those were my options.
Click to expand...
Click for original message
When running the repair function to convert mailboxes to lowercase, I immediately receive the following error:
/usr/local/psa/bin/repair --convert-mailboxes-to-lowercase
2014-10-30T00:11:09+01:00 ERR (3) [util_exec]: proc_close() failed
What does this "[util_exec]: proc_close() failed" means and how can I fix this error?
have some E_Books in PDF I want to convert them to word document format
Also need a share hosting for this
for some reason virtual host which i create,i always get error
403.I tried many things,from chowing to various owners and other,until i
found temporal solution-i created copy of html directory(which is
created during install and which working fine) called bla,and pointed
domain to bla directory and then it worked.But this is problematic since
all files are in home directory,which means i will need to copy all of
them into /usr/local/nginx/.
Also what is problem is with alias,i have a script which is located at
/home/ also and that again causing that 403 error since it's not located
in /usr/local/nginx.I tried to make it work by creating symbolic link
but that didn't worked.Seems only solution would be to copy script to
nginx directory which will require a lot of file editing because of
location change.
Also there is a problem with domain alias-*.domain.com not working at
all,nor 1.domain.com.If i have *.domain.com instead domain.com,then i
get 404 error on directory alias,while it works on www.
How do i enable hotlink blank protection for images,where images can be
loaded only by specified domains and direct access?
And how to rewrite following apache rule:
RewriteEngine on
RewriteRule ^directory/(.*)$ /st/st.php?%{QUERY_STRING}
I using latest stable version,and i think same problems was on latest
legacy version too.
Here is my server section of domain:
server {
listen 81;
server_name www.domain.com *.domain.com ;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root bla;
index index.php index.html index.htm;
}
location /TC/ {
alias /home/tradecontrol/client/;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root bla;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ .php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on
127.0.0.1:9000
#
location ~ .php$ {
root bla;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME
/usr/local/nginx/bla$fastcgi_script_name;
include fastcgi_params;
}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /.ht {
# deny all;
#}
}
i dunno if any one here can help (im hoping some one can) but basically i have installed nginx onto a freebsd server, added 2 domains to this webserver.
the first domain works correctly and loads up all php files etc how ever the second domain wont.
its pretty confusing as both configs are the same, if i comment out the working config the non working one will work perfect.
i have uploaded a copy of the configs onto
www f1colo com / config.txt