We are going to host our own website. I built up a windows 2003 server. Installed IIS6. I am working on file upload to our website. I can get files to upload to c:Temp but not to c:Inetpubwwwrootourwebsiteupload.
I even set up the upload directory for full sharing with write permissions. Still no help.
I went into windows explorer and right clicked on the upload dir and shared it and set the permissions for read and write. That should take care of NTFS permissions. But no matter what I do when I click on the upload directory and go to properties is shows 'read only'. Can't seem to get that turned off. Until I do I don't believe I can upload a file to the upload directory.
I went into iis6 mgr and and set the upload directory for full access - read and write. That should take care of iis security.
I went to default website (there is only one) and allowed anon login. Even told it use the Administrator account for login with all read and write permissions.
I've been running pure-ftpd for around 4 months now without any problems, until around 24-48 hours ago file upload has been going a bit loopy.
When you upload a file the speed bounces considerably, and at times pauses on 0kbps until it then dies and fails the upload. 9/10 uploads I have tried have failed.
[R] Opening data connection IP: 74.86.20.181 PORT: 35283 [R] LIST -al [R] 150 Accepted data connection [R] 226-Options: -a -l [R] 226 6 matches total [R] List Complete: 374 bytes in 0.64 seconds (0.6 KB/s) Transfer queue completed 1 File failed to transfer [R] Connection lost: chacha We have restarted pure-ftpd a number of times, but have had no luck.
Please could you try and upload a file (at least 10mb and please nothing dodgey) to this FTP account:
I'm trying to accomplish a rather common task of removing file extensions, where say, instead of index.php, just index can be accessed.
I've gone through many tutorials that offer all sorts of different ways how this can be accomplished and none of it works but what's commonly given is something like this.
i have moved my hosting to a new provider and i was wondering what is the quickest way to upload my 500MB files to the new server? Is there anyway i can speed this up like have a dedicated uplink port to my server, or via VPN or something, cos at the moment i have an upload speed of around 10KB/s,
My requirements are 500MB, 5GB bandwidth, rails and postgres, $5-6 per month. It looks like there are many providers out there that are offer that.
However the only uploading method shared hosters seem to offer - or at least the only method they advertise - is FTP. Coming from a university and sysadmin background, I thought that anything that sends passwords over the wire unencrypted had died long ago (except HTML forms and legacy systems).
Are there any shared hosting services that allow a more secure upload method (e.g. scp, rsync-over-ssh, even webdav-over-ssl)?
company for over a month or 2 contacting them (support tickets) is as useless as not!.. their reply is always simply: we checked and nothing at our side! (asking for a clarification simply gets u nothing!)
problem is simply ONLY with ftp uploads! my line upstream is 256Kbps (32 KB/sec) and down 1Mbps and i was always capable of pushing up to 2.2 GB/day ((i monitor my traffic all the time)) but just recently some weird things started appearing...
before uploads would never go under 27-26 KBs on my FTP client now it's so normal finding it dropping to 15,10,4,2, 0! ya a whole 0! and that's not just for a second or two it can stay like that for maybe aminute then go up back again! And upon watching my traffic statistics closely, i found myself pushing at the most 1.6 GB only a day! another funny thing is that files used to appear AND PARTIALLY in the root directory instead of the desired directory! so WHAT IS UP!
Ok i get 403 forbidden when i try to access /uploads/ on my server. I wish to make it public. Can i make a index.html file dispay all of the files in the directory?
I am about to purchase a reseller (Diamond) or maybe just a Hosting (Swamp) but I cant seem to find anywhere details on their MySQL policies.
I have a forum and the database if growing in size daily and im concerned about the database upload limit that may be applied. I have a dedicated server at the moment and im able to request that be changed via php.ini but where would I stand on this if I were to move to shared hosting?
I just moved to a new, dedicated server this week. My vbulletin forum users typically upload mp3 files under 10MB. At the moment, I can't seem to get anything above 6MB to work.
In vBulletin land, they recommend changing these in php.ini: upload_max_filesize - Largest size of a file to accept. post_max_size - Must be larger than upload_max_filesize. memory_limit - Should be larger than post_max_size. max_execution_time max_input_time
I've cranked all of those up and restarted Apache.
I'm still having the same problems. The little window with the form turns white after what appears maybe 5 minutes, but I haven't timed it.
They also mentioned changing the LimitRequestBody in Apache. I appear to be screwing that part up so I created a thread in the Apache forum specificallya about that. [url]
So I wanted to ask if there were any other possibilities that you guys could think of that would inhibit the file size up uploads via a form.
I'm running httpd-2.2.8 and php-5.2.6. It needs to be said that this forum is config is mostly right out of the box. $_SESSION wouldn't work in php until I changed the directory for it yesterday. So there may be a very basic config setting that I missed.
---------
I decided to check my error logs.
PHP Fatal error: Allowed memory size of 33554432 bytes exhausted (tried to allocate 9852343 bytes)
I'm confused. I have an allowed memory of 30MB (give or take). So why does a 10MB file "exhaust" it?
We have a server that we just changed over to PHPSUEXEC. On this server, we have a large IPB (Invision Power Board) forum that we have not been able to get uploads in the forum back working again. Users are getting the message that they don't have permission, and to contact an administrator.
I have looked on IPB's forum for PHPSUEXEC related issues, but can't find a solution. Of couse, before phpsuexec the "upload" folder had 777 file permissions, but under phpsuexec this must be 755. It isn't working though.
Anyone had experience with this with IPB and know how to fix it?
I'm currently a video sharing site and I'm aiming for large videos (around 500MB - 1GB), now I have to take into account an average user should only be able to do 30k-50k per sec.
So the session_timeout and upload_max need to be adjusted. Anybody with experience with large upload sites ?
First of all, I discoverd this forum during my quest to unravel the mysteries of how my site was hacked. I hope this is an appropriate forum to discuss the issues even though I am not a web hosting provider, but merely a customer of a web hosting company, hostrocket.com
I have an installation of WordPress 2.1 WordPress creates a couple world writable directories such as Uploads and Cache which are owned by nobody. Apparently (according to the tech support at hostrocket.com) someone was able to insert and exectue a php script in my world writable Uploads directory. Over 40MB of scripts, executables and files were uploaded. As best I can tell, my space was being used as some sort of link farm or perhaps acting as a server in my webspace. I do not have much knowledge about these things and consequently can't talk very inetlligently about them. But I am trying to grasp what little I am able to absorb about how this could have happened, what I can do to mitigate it from reocurring in the future.
Some of the stuff that was in the directory is as follows...
So the first thing my webhost had me do was to change ownership of the directories owned by nobody to me. Then I was able to change permissions from 777 to 755. However in so doing, I am no longer able to use the Dashboard of WordPress to upload images anymore, unless I temporarily change permissions back to 777.
The other thing the tech support guy did is to create an .htaccess file with, php_flag engine off I guess this basically renders php scripts impotent from running.
So without flaming me, can you help me understand how someone in a shared server environment is able to put a php script into one of my directories?
What amazed me was this particular script, "99.php" actually when viewed in a browser window titled phpshell was called "c99adult v. 1.0 pre-release build #16". It basically enabled whoever had access to the URL, to view my webspace, and do all sorts of nasty things. Talk about a wake-up call!
Obviously this enabled the hacker to view my config.php file and ascertain my database password and everything else. Whether he did, or whether there is a logfile of that info that could enable him to hack the database at some time in the future is unknown to me but it's really freaking me out.
Rapidly growing error logs showing the same message
$ug-non-zts-20020429/ffmpeg.so' - /usr/local/lib/php/extensions/no-debug-non-zts-20020429//usr/local/lib/php/extensions/no-debug-non-zts-20020429/ffmpeg.so: cannot open shared object file: No such file or directory in Unknown on line 0
root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429 ./ ../ eaccelerator.so* root@server [~]# ls /usr/local/lib/php/extensions/no-debug-non-zts-20020429 ./ ../ eaccelerator.so*
i manage linux apache webserver with a few wordpress blogs and from time to time i see someone inject a malicious .php file into wp-content/uploads/2014/10/ directory.
i think its some bad plugin or theme, but these is more blogs, i ugrade, update, WP, but
how can i setup some monitor to tell me which php file (or even line in php file) injected that malicious .php ? I have linux root access so i can setup anything
Error is, [an error occurred while processing this directive]
If I "uncheck" IncludesNOEXEC in Apache Global Configuration the error disappears, but the SSI doesn't work. If I check it the error is there, but the SSI works.
Here's what I have done so far,
Through WHM, Main >> Service Configuration >> Apache Configuration, Pre Main Include, Pre VirtualHost Include, Post VirtualHost Include, I added, Options +Includes AddType text/html .htm AddType text/html .html AddOutputFilter INCLUDES .htm AddOutputFilter INCLUDES .html
Options +ExecCGI AddHandler cgi-script .cgi .pl
I also added this to the httpd.conf <Directory "/"> Options +ExecCGI FollowSymLinks Includes IncludesNOEXEC Indexes -MultiViews SymLinksIfOwnerMatch AllowOverride All </Directory>
Options +ExecCGI AddHandler cgi-script .cgi .pl
Then I tried, Options +ExecCGI AddHandler cgi-script .cgi .pl in the .htaccess file
I got a vps and I dont really understand how ram works but my sites arent really that big yet actually not at all at least teh ones on the vps. I am using directadmin as the panel.
