Does anyone know anyscrip or software auto block IP for windows server 2003. I'm using windows server ent 2003 for share hosting. I was use netstat to recognize current connect and detect ddos to my server throught that command.
With one IP you can use IPsec to block IP request to your server but it's a lot of IPs request, i can't use that service. Does anyone have any solution for that.
how to detect and block IP’s automatically using RRAS
I have a problem with people trying to connect to MsSQL. I can’t close this port because I allow clients remote access.
I have so many it feels the windows event log. I know you can run this command to add a IP and Port to RRAS Just need to find away of detecting them
netsh routing ip add filter name="Local Area Connection" filtertype=OUTPUT srcaddr=0.0.0.0 srcmask=0.0.0.0 dstaddr=xxx.xxx.xxx.xxx dstmask=255.255.255.255 proto=TCP srcport=0 dstport=1433
I want to auto block IP address when it reach to 100 connection ? using iptables
Any IP has more than 100 connections must be blocked by iptables.
I want to have a automated backup system which does backup/dump the current mysql databases, then transfers it to another system, per ftp, or even email's a download to my directly.
View 6 Replies View RelatedI am getting a bsod on a windows 2003 server but its so quick I can't even read it just know the color of the screen when it pops up its that quick. F8 to bring up safe mode options but to disable automatic restart on system failure... its not there. Everything else is but that so how am I to stop the auto reboot?
View 3 Replies View RelatedI received the following error regarding an auto update that ran on the server.
Execution failed.
Command: ai.exe
Arguments: Array
(
[0] => --select-product-id
[1] => panel
[2] => --select-release-current
[3] => --upgrade-installed-components
)
Details: ERROR: error during prepare patch panel-12.0.18~patch51...Failed to download the package URL.... The requested URL returned error: 500 Internal Server ErrorNot all packages were installed.Please try installing packages again later. I did verify with a web browser that I can access and download the WMIMSDNSProvider.dll file specified in the update. Is this just due to a timeout and the system retries the update? If so, how can I confirm that patch 51 got applied at some point.
I want to have this option on my homepage ! Is this posible whit plesk panel 11.5 or do we need to upgrade??
View 3 Replies View RelatedI found out the ips that were being used to attack my server, but I don't know how to block them. My provider (Limestonenetworks) will not block them from the main router because they don't believe in blocking traffic. Is there a way I can run a firewall that could block the ips? The windows firewall does not have an option to block ips. Last question, if I was to install a 3rd party firewall, it won't lock me out of the server right?
View 4 Replies View RelatedRecently our windows 2003 server, running Microsoft SQL 2005 has been the victim of brute force attacks on the MS SQL admin account. They are unsuccessful, but its annoying all the logged entries in event viewer and the extra stress they are putting on the server asking to authenticate 25 – 60 times a minute.
It comes from the same IP addresses. Is there a way to configure a software fix to block these ip addresses completely from the server? We are running a Hotbrick NAT router, SPI firewall but to my knowledge there is no way to configure an individual IP block with it. Here is link to the specs on the Hotbrick we have:
[url]
I am running windows 2003 server.
Recently, there have been brute force attacks to try and compromise my sa password (MSSQL) and root password (MYSQL).
I would like to block certain ip addresses, but looking in the built in firewall in windows I don't see a way to do this. Is this possible with the built in tools/firewall that comes with windows 2003?
If not, can anybody recommend a simple firewall solution that will allow me to block ip addresses? I don't want something that is bloated and blocks popups, viruses, adware, etc. I just want a solution that will allow me to block ip addresses and prevent brute force attacks.
I have an address that receives hundreds and hundreds of e-mails a day. It's an address people aren't supposed to use (basically noreply@mydomain.com), but people do. I'd like to stop being the guy that gets these and routes them as appropriate, but we can't just turn it off and cause a hard bounce, because that will bewilder too many people who don't get that replying to noreply@mydomain.com is a bad idea. (Our website sends out notifications to people. A lot of people reply for various strange reasons, and we also get a lot of autoresponders sending us junk.)
I'm a Linux admin, so I'm a bit out of my league -- this needs to be configured on our Exchange box.
What I'd really like is an auto-responder for this address that will tell people that they e-mailed a mailbox that no one uses, and give them directions on how to contact a real person if need be.
However, fully half of the e-mails we receive are people's auto-responders. Is an Exchange auto-responder going to reply to their auto-responder? This will completely bewilder people.
And if this will auto-respond to auto-responders, is there a cleaner solution here? Again, it's got to be Exchange, but I'm a Postfix guy, so I have very little experience here.
I am not exactly sure where to post this so I figured I would try here.
I have quite a few customers I host on a dedicated server. I would like to offer them the ability to backup any kind of data they want to on the server as well.
I am looking for a simple program that i could distribute to my customers and all they have to do is:
Install the application
Type in UN/PW I provide them
Select the directories they would like automatically uploaded
Select the frequency of the automatic upload
Does anyone know of good software I can use that is that simple to use?
I have signed up for hostgators webhosting.
Upon setting up, I found out that outgoing mails from any email addresses from my domain name cannot be copied to another email account. I've tried scripting on the client software (e.g)outlook. it works. but then again, it only applies on the client side if the scripted client is present. this would not work if the email is sent from the web based login.
is there a work around for it?
If there isn't, does any one know of any webhosting co. that allows that?
Situation is, my current host does allow it. Due to small amount of disk space allocated, reliability of the service, technical support and cost, we therefore have decided to switch to another host.
I see on the net many scritp demos that get auto-reseted every X hours (all data is reverted, and site files reset). Is there a script out there that does this I can download?
View 1 Replies View RelatedI just got about 10 centos vps servers. are there any programs that will do most of the hardening or security for me?
View 13 Replies View RelatedWhat software i can use to backup ftp files auto from different accounts into my pc?
View 0 Replies View RelatedHow can have clamv antivirues as auto protect mode in whm/cpanel server?
We need to configure clamv as auto protect.
Are there any hosting solutions that offer expanding bandwidth and space as their base packages increase. I was with Dixiesys for over 7 years, and had a decent package, but it was getting a bit outated. When I enquired, they required me to either pay more for a mid-grade package, or give up portions of my package for an equivalantly priced low-grade package. I'd rather a company automatically upgrade accounts as they upgrade their base packages, rather than being told to piss off when the package becomes outdated.
View 10 Replies View RelatedI am wondering does anyone know of either a program/software, and/or script that will auto build a dedicated server? For example, someone purchase my product as soon as it is verified than it starts the building process and builds the server to what they asked for, partitioning, etc.?
View 6 Replies View RelatedI use automatic partition in centos 5... I have two hard drive, and it looks like it auto raid everything into volgroup0? is this true?
View 0 Replies View RelatedIs anyone experiencing that cpanel automatically restarts mysql at 2AM?
I'm curious is that new feature or something has gone wrong?
This has started after cpanel upgrade mysql to 5.0.67 version.
I'm not so good with cpanel so please can somebody tell me where cpanel holds its crons?
I cannot find nothing in /etc/cron.* or in cron -l, and I want to turn this option off.
My webhost's autoresponder does not keep track of who it has auto-responded to. Hence it will auto-respond back to the same person twice.
Some emailer might send me an email (most likely spam) and I would auto-respond. But that emailer also has a dumb auto-responder and response back to me. I would auto-respond back; it would auto-respsond back forever.
I'm afraid to turn on an "Out-of Office" auto-responder because if that happens, I would have a billizion emails in my inbox upon my return.
Is there a smart auto-responder that tracks who it has responded to and auto-repsonds to the same person only once?
I have searched the whole forum for help on this but couldnt find anything.
I have postfix running on a backup mx server for a plesk box. The backup mx does a very good job of reducing spam and virus to my plesk box thanks to mailscanner.
The problem i have now is i have to manually update postfix transport and relay_recipients file everytime a new domain is created in plesk. Do any one know how i can create a custom script that will pull domain information from my plesk box and will update postfix on the backup mx server. Maybe a website with information that can help.
i can always set a cron to run the postmap command to update the tables but i will need to update the respective files (transport, relay_recipients) first.
I have all my computers hooked up to a server running Ubuntu Linux. I want to make it so that at say, 5 AM every morning, the computer checks for changes to a specific folder..and if there are, automatically transfer the files to the server.
This way, if anyone on my network needs something backed up they just put it in that folder and it will auto backup just in case.
Is there anyway to do this? Software?
I'm a happy hostgator user.
I just don't like their lack of a good backup system.
They just say they're doing weekly backups that you can ask for a fee.
I'd like an hosting exactly like hostgator (well, similar) but with daily and weekly auto-backups on a secure storage (like read-only tapes etc.).
Do you know some?
I've heard about a backups system by R1soft and that some hosting companies use it, but those that I'm finding on Google I've never heard of them.
One is HawkHost that seems good but I'm not sure about their choice of using LiteSpeed webserver instead of Apache..
They say it's a faster web server.. but of course the server won't run faster, they would just fill in more clients on every server..
How do i enable auto mount file system in my system? I am using linux ver4
View 2 Replies View RelatedI have Linux and Windows server with Plesk 8.6 as the control panel and now the issue is that there is no option to auto suspend the accounts which are using over the quota(Diskspace or Traffic). All I have to manually check the accounts and to suspend, which I think not good. Is there any option to get the accounts auto suspended once they reached the limits. In the Notifications area, sending mails to clients regarding the quota, but no option to suspend the accounts.
View 8 Replies View RelatedI got two identical hard disks, one uses to run everything other is for backup, how to setup automatic backup of website content and MySQL database?
View 3 Replies View Relatedanyway to auto reboot server every 6 hours?
will this effect on the server?
i'm running on CentOS 5 and whm
is there a way to automate apache restart when my server's load reached 5+ sever load?
View 8 Replies View Related