I am trying to deploy siteminder web agent on apache web server.They have a pre-req which says that while installing apache server, "install as a service, available for all users" "When an Apache-based web server is installed using a single user account, the Agent configuration cannot detect the Apache-based web server installation."
I don't see any msi installer anymore for apache web server, which had this option to select while installing.Now all i see is a zip file and i just have to unzip as part of installation. With this when I install httpd as a service, it is not detected by siteminder agent.So how can I set this "install as a service, available for all users" after installing from zip file?
sitea.com was pointing to /home/me/public_html/sitea
siteb.com was pointing to /home/me/public_html/siteb
On my new server, I have root permissions and used Plesk to create two domains sitea.com and siteb.com . Now plesk asks for a user to be created for each domain, so created usera and userb for sitea and siteb respectively.
Now as root on my server I created the dir /home/me/ and untarred the whole backup from old server to new server and I have dirs :
/home/me/public_html/sitea and /home/me/public_html/siteb
In apache configuration in file: httpd.include_sitea under dir /var/www/vhosts/sitea.com/conf/httpd.include
I changed the document root to /home/me/public_html/sitea
So I thought I am all set. But it does not work. When I try sitea.com in the browser it works but for all subdirs, for eg sitea.com/images it says Access denied.
This is because the dirs I created are owned by root.
So the owner of /home/me/public_html/sitea needs to be usera for this to work ?
Again for siteb to work I need to change the owner of /home/me/public_html/siteb to userb ?
This will be painful ? At least I should be able to change the owner of /home/me/public_html/ to one owner and ensure all sites under that work fine. How do I do that ?
I think the problem is clear by now. Its that I want all my sites to work off from .../public_html/ sub dirs.
Is there a way to tar a compiled apache/php installation and move it to another identical server?
If on the first server I specify all the configure options for both apache and php to point to /usr/local/apache2 for example, and then tar apache2 dir and untar it on another server will everything work just like it should? Or do I need to compile apache/php from scratch on the second server.
It would be nice to just be able push the apache/php tar file on to the new provisioned server and be ready to go.
Has anyone done this before, what is the best way to do this and are there any issues to look for.
I think I have tried everything else and userdir would work the best and is essentially what I am looking for. So basically I want be able to view all the folders in the /var/[folders]/www the problem here is that only one of the folders in there is a user. This user is called server. So when I go to http://myipaddress/~server I can view the files and its all fine, but I want to be able to go to http://myipaddress/~mark which would be /var/mark/www but "mark" is not a user. So I just get a 404 page not found error.
I am having a problem getting Apache to allow access to IE 6/7/8/9 users with client certificates installed to access restricted resources. I have several servers (Windows and Linux) running various versions of Apache from 2.0 through 2.4, all behave the same way. I am simply unable to get client certificates to authenticate IE users. how I built the CAchain, CRLs, etc.
Note that using the same client certs from Firefox works just fine, users can successfully authenticate to the resource and get content.
##### ssl.conf SSLEngine on SSLProtocol all -SSLv2 SSLCipherSuite HIGH:MEDIUM
I am using mod_auth_form.For security reasons, I would like to ensure that users are ALWAYS redirected to the page specified in AuthFormLoginSuccess Location after a successful login. Therefore, I would like to disable processing of the httpd_location form parameter.
The best I can do seems to be to use AuthFormLocation to set the field name to a hard-to-guess value, e.g. AuthFormLocation "32 b63 a#ve"
The upgrade has an error when manage the users database.
PRODUCT, VERSION, VERSION OF MICROUPDATE, OPERATING SYSTEM, ARCHITECTURE OS Microsoft Windows Server 2008 R2 Service Pack 1 x64 Panel version 11.5.30 Update #13, last updated at Sept 1, 2013 03:30 PM
PROBLEM DESCRIPTION In a costumer panel have a one database MSSQL, and assign to this DB 3 users, but the tab option "Users" don't work fot his costumer and show this error:
Error Javascript: TypeError: template is null this.template = template.toString(); in protototype.js 8472831 (lÃÂnea 807)
ACTUAL RESULT Error Javascript: TypeError: template is null this.template = template.toString(); in protototype.js 8472831 (lÃÂnea 807)
EXPECTED RESULT Show users in the tab users for database.
On my server, users can connect to any database as long as they have the database user and password. This makes it easier to hack any database on the server. What I want to do is to make the users can only connect to their own databases and not other's.
I tried changing the localhost ip address but it didn't work ( I assume I didn't do it the right way)
I have a VPS with cPanel/WHM version 11,and since 2 days ago for now apaent reason I cant access the WHM/cPanel interface.I contacted my webhost and they suggested to reinstall the Apache.Could someone tell me the command to do so via SSH?
how to install an SSL certificate on this server but really haven't a clue. I searched all over the internet and the ensim site with no luck. give me a little direction in my journey from hell.
I have installed mod_security2 with apache2.x with success
but when I try to restart apache I have this wrong Msg:
PHP Code:
httpd restarthttpd: Syntax error on line 34 of /usr/local/apache/conf/httpd.conf: Cannot load /usr/local/apache/modules/mod_security2.so into server: /usr/local/apache/modules/mod_security2.so: undefined symbol: msc_alert
PHP Code:
[root@secure modsecurity-apache_2.1.3]# ls -la /usr/local/apache/modules/mod_security2.so-rwxr-xr-x 1 root root 52541 Nov 6 16:26 /usr/local/apache/modules/mod_security2.so[root@secure modsecurity-apache_2.1.3]#
I have been running into the following fatal error issue while compiling apache2.4 version on Solaris. Config command ran successfully, however the make command fails with recording name conflict error for libapr-1.so.
ld: fatal: recording name conflict: file '/soft/oracle/product/apache24/httpd-2.4.12/srclib/apr/lib/libapr-1.so' and file '/soft/oracle/product/apache24/httpd-2.4.12/srclib/apr/.libs/libapr-1.so' provide identical dependency names: libapr-1.so.0 (possible multiple inclusion of the same file) ld: fatal: file processing errors. No output written to .libs/httpd
*** Error code 2
make: Fatal error: Command failed for target `httpd' Current working directory /soft/oracle/product/apache24/httpd-2.4.12 *** Error code 1 The following command caused the error: otarget=`echo all-recursive|sed s/-recursive//`; list=' srclib os server modules support'; for i in $list; do
I've just created a "droplet" (a VPS) from DigitalOcean with the latest version of Ubuntu Server and I have SSH access. While creating the droplet I needed to enter a hostname (a domain), which is registered at Godaddy, but I haven't touched its configuration yet.
I've installed the Webmin control panel through SSH and at the end of the installation I was told to access it through mydomain.com:10000. However, as expected, that didn't resolve in my browser (since probably the domain is not properly configured). I've tried with [the droplet's IP]:10000, but this didn't work either, the following message was displayed:
This web server is running in SSL mode. Try the URL mydomain.com:10000/ instead.
I can't get MAMP to work. I sadly uninstalled and AppZapped MAMP and reinstalled it. Now I can't get WordPress to install. I can make a DB on PHP MyAdmin but I get "not found" when I try the WordPress install. I can't get the PHP info? line to work either. How do you troubleshoot MAMP?Â
There is 1000MBPS network set up between three computers and server.
Server has files which program saves.
Program is being run in three different computers.
Each computer tries to get into same file (eg last bill) that was created before. First computer goes in within seconds. second minutes and third just crashes. No matter which computer runs it first, last one crashes.
So called "server" is running on Windows XP pro since it just needs to keep one program files. However I cant find out whats causing file sharing over network bug that crashes access to same file if connection from many computers.
