an Apache 2.2 server suddenly quit accepting traffic on port 80. The error message was "An attempt was made to access a socket in a way forbidden by its access permissions could not bind to address 0.0.0.0:80 ".It took a while, but the server is now back up.
View 2 RepliesAlright now this is the most intelligent way to send spam I have ever seen. Apparently a guy has made a PHP or Perl script that is acting as an MTA. That's right: He is neither using Sendmail nor Exim but he made a script that acts as an MTA. That means the script itself connects to third party mailservers via port 25 and communicates with the remote mailserver as if it was an MTA itself. This works even if Exim is entirely disbaled...
The spam still get's sent. The script is running only occasionally...not like a daemon.
So it is nearly impossible to locate it. You have no Exim logs to look at. And in the Apache logs any PHP script could be it... You are not able to find that out. Therefore I am unable to stop him unless I manage to block outgoing connections to another host's port 25 for any program but for exim.
How can I configure my firewall (APF) so that only Exim my connect to other servers via port 25? Is that even possible?
I have tried everything I know (I know not much)
I have rebooted it multiple times. I have terminated lots of account and now I have only 2 or three accounts.
I have removed all the fishy scripts. Done everything I can.
But it just becomes un responsive within a minute of re booting.
Its a Pentium 4 Single Core server.
1GB Ram and 160GB harddisk with cpane+WHM.
I get error
cpsrvd failed @ Thu Dec 11 19:50:43 2008. A restart was attempted automagically.
Failure Reason: Unable to connect to port 2086
I cannot even connect to server because within minutes the server hangs.
I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
I have a webserver using apache 2.4.4 and 2 application servers with tomcat 7 on windows server 2008 R2 which uses VMWare ESX5.
I use juvmroute to load balance between these 2 application servers. but with no error in apache and tomcat log files, it can not connect to application servers. and i have to restart the apache service. and it crashes after almost 5 minutes.
This is the part of the access.log file where the crash started:
[Mon Aug 05 00:02:51.980503 2013] [mpm_winnt:notice] [pid 1036:tid 292] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Mon Aug 05 00:02:54.008507 2013] [mpm_winnt:notice] [pid 3416:tid 200] AH00364: Child: All worker threads have exited.
[Mon Aug 05 00:02:54.024107 2013] [mpm_winnt:notice] [pid 1036:tid 292] AH00430: Parent: Child process 3416 exited successfully.
[Mon Aug 05 00:08:12.932936 2013] [mpm_winnt:notice] [pid 2648:tid 296] AH00455: Apache/2.4.4 (Win64) configured -- resuming normal operations
[Code] .....
I installed apache, and it seems to be running fine.
I can view the website when I do domain.com:81
However when I solely type domain.com I can't view the page. Why is that, and how can I fix this?
I'm trying to compile Apache 2.4 on a MAC OS X 10.9 with XCode installed and it keeps telling me the gcc in it cannot create executables, where I can find documentation about how to do this?
I tried the MAMP apps, but I don't want that, I want to have the MAC to act as a server without paying the $19.99 Apple asks for the server software.
How can I set a certain folder under my www folder to use a non standard port, 6767 instead of 80. I am running apache 2.
I tried putting the following in my httpd.conf with no luck, each time when I attemped to restart apache I got a fatal error:
<Directory "/var/www/html/crm">
Listen 6767
</Directory>
<Directory "/var/www/html/crm">
Port 6767
</Directory>
<Directory "/var/www/html/crm">
Bind 192.168.0.200 6767
</Directory>
my apache listen at port 78, however, when I modify listen 80 and port 80 to listen 78 and port 78, restart apache, it does not work. I checked the port 78, nothing but apache there. even I modify all :80 to :78 in the httpd.conf, still does not work. there only one site on the server. there is nothing on error log file.
my system is x86_64 cento 4.4 and apache is 1.3.37.
I use url http://myurl:8020/ERC to access application and I am able to. But I dont want to use port number in the URL.Would like to access application using http://myurl/ERC . I referred to one of the post and added below entries to httpd.conf file.
ProxyRequests Off
ProxyPass /ERC http://myurl:8020/ERC
ProxyPassReverse /ERC http://myurl:8020/ERC
But I am still not able to access http://myurl/ERC.LoadModule entries are enabled and I have restarted apache.
any good rule to limit Apache (port 80) connections from 1 IP to 15 with iptables/csf?
And total connections to the box to 100?
How do I prevent apache from binding to port 443? HTTPS support is not needed so only want apache to bind to port 80
My /etc/apache/httpd.conf has port 80, but no mention of 443 anywhere, yet netstat reveals it binding to port 443
I have apache 1.3.29.0.2-5 on Debian Linux (knoppix)
I am setting up apache 2.4 as a service locally through localhost on a windows 2008 R2 standard server. I have set up SSL listening on port 443 and works correctly, however I am having trouble figuring out how to get apache to authenticate my CAC card.
I have downloaded the DOD certs and put them into various types of files including pem, base 64, der etc and I have yet to figure out a way to get the client certificates validated.
I have left out the information about the SSLCertificateChainFile, SSLCACertificateFile and SSLCARevocationPath as I am sure this must be where my problem is.
Is it possible to get this done through localhost. Here is the error I am getting in the error log.
[Wed Oct 29 11:37:05.675491 2014] [ssl:error] [pid xxxx:tid xxx] [client 127.0.0.1:59282] AH02039: Certificate Verification: Error (20): unable to get local issuer certificate
I am using a self created self signed server ceritficate. Here are some details from my httpd-ssl.conf file:
Code:
<VirtualHost _default_:443>
DocumentRoot "${SRVROOT}/htdocs"
ServerName localhost:443
ServerAdmin admin@example.com
ErrorLog "${SRVROOT}/logs/jtdi.log"
TransferLog "${SRVROOT}/logs/jtdi-Transfer.log"
[Code] ....
Apache seems to have the port blocked. I removed my thumbdrive earlier after using XAMPP on it successfully that had it on it and went somewhere then came back & well all the sudden it will not work. I am getting the below error messages after I push the start button.
View 1 Replies View Relatedi m using xampp on window. how to hide port on url?
View 5 Replies View RelatedHave to type the full address with port number....
View 4 Replies View RelatedProblem detected!
19:58:32 [Apache] Port 80 in use by "Unable to open process" with PID 4!
19:58:32 [Apache] Apache WILL NOT start without the configured ports free!
19:58:32 [Apache] You need to uninstall/disable/reconfigure the blocking application
19:58:32 [Apache] or reconfigure Apache and the Control Panel to listen on a different port
19:58:32 [Apache] Attempting to start Apache app...
19:58:32 [Apache] Status change detected: running
19:58:33 [Apache] Status change detected: stopped
19:58:33 [Apache] Error: Apache shutdown unexpectedly.
19:58:33 [Apache] This may be due to a blocked port, missing dependencies,
19:58:33 [Apache] improper privileges, a crash, or a shutdown by another method.
19:58:33 [Apache] Press the Logs button to view error logs and check
19:58:33 [Apache] the Windows Event Viewer for more clues
19:58:33 [Apache] copy and post this
19:58:33 [Apache] entire log window on the forums
that is my error message I have changed skype's port from using port 80 and also uninstalled IIS from microsoft I have only installed xampp on its own without wamp server so that they dont conflict.
I had setup an apache home server. here the 80, 8080 ports are blocked . So I made my apache to listen to 4040 port. but the problem now is ,i use cloudflare service to point my domains to my server. now its showing error when i give my ip because the port is not 80. i tried putting dns host point to xxx.xx.xxx.xx:4040 in cloudflare but shows invalid ip ...
View 1 Replies View RelatedOS: RHEL 6.4
SELinux: permissive mode
Apache: 2.2, mod_fcgid, mod_suxec, mod_ssl enabled
Common Name: www.user.dept.university.edu
(Note:user names, accounts, organizations etc. sanitized)
why Apache will serve PHP-based web pages over port 80 but not over 443. Here is the virtual host block excerpt from httpd.conf:
Code:
<VirtualHost *:80>
ServerName user.dept.univsersity.edu
ServerAlias user
DocumentRoot /home/user/public_html/subdirectory
<IfModule mod_fcgid.c>
[Code] .....
I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I have setup my server with DDYNS through my domain name registar. Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)...
Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I am, however, having great difficulties doing this.
I have setup my server with DDYNS through my domain name registar.
Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.
My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)
This is annoying for others to type out and I am just wanting to make it look pretty. Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Replies View RelatedI have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
about the NIC and switch,
there are giga port vs mega port,
in your experience,do they really be different?
I recently changed my SSH port, but locked myself out when my APF firewall was installed.
Where would I got to add a custom port inside the APF's config file?
is to use windows authentication, to connect to the site, and connect to MS SQL with the same user.
I read on the net (http://msdn.microsoft.com/en-us/library/ms998358.aspx), and it said I should go to my default sites properties, to to the "directory security" tab, and make sure "Integrated Windows authentication" is the only box that is checked.
I did that and now I cant connect to my site...
When I try to connect, it bring up a windows user name and password box. I put a user name and password in, but nothing...
Iv double checked the user exist, and still nothing...
I REALLY REALLY need to connect to my FTP on 1and1 and for some reason it seems to be down. Is anyone else having this problem?
View 2 Replies View RelatedThis week connectswitch's service has not been that good. Basically first they restart the node without prior notice and our vps was down for 7 hours. and now we buy our cPanel license via them and they havent paid it so the license is now expired although we have paid them for it.
View 11 Replies View Related