Allow To Access A Port With APF
May 10, 2008How can allow an ip for access to port #2323?
I use apf firewall.
ADVERTISEMENT
Plesk 11.x / Windows :: How To Limit Access To Few IP Address To Access Port 8443 On Firewall
Aug 28, 2012How can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View RelatedCan Not Access Flv File With Lighttpd Using Port 81
May 19, 2009I am using port 81.
I can access all the files without any issue.
Until today when I check the flv file on other machine,
[url]
It say 404 no found!
I can access other *.jpg *.html file without any problem, but no flv file.
I thought it's firewall issue, but even I turn off firewall, it's still having the same issue.
And I have another computer in the same network, it's fine. they are all windows XP.
Block External Access To Cpanel Through Port 2082?
Jun 2, 2008if it is possible to block external access to Cpanel through port 2082?
View 7 Replies View RelatedPlesk 11.x / Linux :: Access Over Subdomain Rather Than Port 8443
Apr 29, 2015I need to access plesk 11.0 over a subdomain at port 80 rather than port 8443 as my office firewall blocks the port 8443.
I tried KB article [URL] .... but its not working.
E.g.: I would like to access plesk panel @ portal.example.com rather than @ example.com/8443or8880
I have ample of spare IPs to use it...
Plesk 12.x / Linux :: Change Port Access To Subdomain?
Feb 11, 2015I have to change what file and how to modify it to allow only one subdomain to have access through port 8015 and not using port 80?
View 7 Replies View RelatedPlesk 12.x / Linux :: Disable Access For Clients Domains On Port 8443
Feb 16, 2015I was wondering if it is possible to disable plesk redirect for clients domains on port 8443.I do not not want clients to to be able to access the plesk login screen when they visit exampleclientdomain.com:8443 but obviously i still want to be able to access my control panel e.g. myprimarydomain.com:8443. Is there something i can do to prevent the sites redirecting to my primary domain or am i better creating a htaccess rule to stop/redirect traffic on port 8443 ?
View 2 Replies View RelatedApache :: Listen On Port 8080 For IPv4 And On Port 80 For IPv6?
Aug 8, 2013I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
Email Server Port- How To Change/add Port For SMTP
Feb 19, 2008Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Replies View RelatedDid Port 80 Port To 7080, But Not Working When Login
Jun 21, 2009I have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
Giga Port Vs Mega Port
Jun 18, 2008about the NIC and switch,
there are giga port vs mega port,
in your experience,do they really be different?
Changed SSH Port - How To Add Extra Port To APF
Jun 10, 2007I recently changed my SSH port, but locked myself out when my APF firewall was installed.
Where would I got to add a custom port inside the APF's config file?
IIS 5 - Cant Access Page From IE7 But Can Access From Firefox
Feb 20, 2008I found a great little app called ID Shutdown Manager which bascially lets you do stuff like wake on LAN, Shutdown, Log Off etc.
The App also has a cgi script which you can call from a web server so you get a web interface to the program.
This is exactly my reason for getting the app as I just wanted to host a web page where I could login from the internet and wake on lan my media PC.
Ok so...
The app gives you all the iis or apache setup instructions and tells you to place the cgi script which is actually a .exe into the scripts folder and then enable basic authentication for it.
Done.
So if I navigate to <SERVER>/scripts/sdmancgi.exe its supposed to give me a user / pass prompt and then when login successful I see the app and can wake on lan etc.
ok I have got this to work
on the actual machine where server is running I can access it in IE7 by localhost etc.. and it works
However when I try to access from another PC in my lan by typing <SERVER>/scripts/sdmancgi.exe I get a nice little message saying the content cannot be displayed you may require to insall a program or something to display it.
If I try to access the page from firefox on same remote PC, it works!
I can also access page from outside my LAN, it works on my N95 browser.
Also I have had friends try it from firefox from the Internet and they say it works as well.
Forgot to mention I am running on port 8081 as I already have other servers running on 8080 and 80 (one is my router and the other server installed itself from setup.exe and I dont know what server its using)
I have also tried latest apache server as well as some other free one. Both have the same effect. Ok in firefox, not in IE.
One would think its a problem with the cgi file not compatible with IE7 however, I even tried to go to default page setup in IIS <SERVER>:8081 and I get the same message. So at this point the server hasnt even tried to access CGI or prompt for Basic Authentication.
I tried googling and not much luck. I read something about CSS and when I view source of failed web page from IE7 it mentions something about CSS so dont know if this is it?
Can't Access Ping Or Access SSH
Apr 30, 2009I'm having trouble with a vps and the ips won't ping and can't connect via ssh.
I can via hypervm console when I run apt-get update but it doesn't download anything.
Can't Access Dns Only Remote Access Key
Apr 24, 2007I have successfully installed dns only to my vps. the problem is when i try to add it to the cluster system on my other vps it asks for a remote access key, so i visit both ip:2087/scripts/setrhash and ip:2086/scripts/setrhash and it shows an unable to connect error in firefox.
this is both using [url]
does anyone know how i can access the remote access key?
How Do I Secure Remote Access To Remote Access Products
Mar 24, 2007I have windows servers that I'll be co-locating very soon. I have purchased a Dell 2161ds-2 and an APC remote boot power strip. Could someone please tell me the best way to secure remote access to these products. Do I put them on public IP's and allow them through the firewall or do I put them behind the firewall and access them after I authenticate through the firewall.
View 6 Replies View RelatedFTP Only On Port 21
Apr 23, 2008I am using proftpd...How do i instruct that the server don't listen on high ports 49152-65534 but only to 21?
The reason is because my client's firewall setup is very strict and i need to give a good reason to open those high ports. Right now, i can ftp to port 21 only but can't do nothing more than that coz the higher ports are blocked.
What's My SSH Port
Jun 24, 2009i now have root access at a site i manage and the previous admin has set up a different SSH port.
I think this because i get " Connection Refused " and that user has access for SSH.
When restarting my SSH services i recive;
Quote:
sshd has failed, please contact the sysadmin.
And from looking that error up it means the port has been changed.
So i have WHMC access and all other root passwords etc, but how can i find out the port?
10 MB Port Or Is It
Nov 5, 2009Bought New VPS recently , it suppose 10MB unmetered .. when Download Big files thru SSH , the Speed Never Exceed 2MB, always 2mb or less ..
i thought i get 10mb, from wht i understood when say 10mb unmteret ..
how to make sure if i'm on 10 mb unmetered or not .. i thought simple just download some big file from ssh and see wht speed ..
Ssh Port
Nov 3, 2008I have cpanel running on a centos box and I want to change the ssh port from (22) the default port to something new i get 13000 login add temps a day. How do i do this i have root access
View 11 Replies View RelatedPort 111
Apr 15, 2007is it safe to keep the port 111 open or what?
i'm using CentOS 4.x
What Port Is SSH Set To
May 15, 2007I am having my ded server disconnected in less than 2 hours if I dont delete a bad website off my dedicated server (I run a free hosting website on it...i know! I know!)
Anyways I need to login to ROOT and manually take this website off the server, which I have NO IDEA how to do anyways, but I need the SSH port to do so and I HAVE NO IDEA what it is!
How do I find this information out?
Port Forwarding A VPS?
Jun 27, 2008I'm a bit new to this, and I wanted to host my server on a VPS. I tried connecting, but that just didn't work. Do I need to portforward the VPS? Sorry, Like I said, I'm a bit new.
View 6 Replies View RelatedPort 1189 On VPS
Apr 16, 2009I know this is a bit of an odd question but I have a VPS which has port 1189 open. Is it normal by default to have this port listening on a OpenVZ VPS under HyperVM? or is this something a little concerning? Never noticed it before, just checking I don't want any illegal applications being hosted on my server by clients.
It's most probably nothing to be concerned about, just wanted to double check.