I have has this error for awhile. I know it is due to authentication. I have searched many forums and have tried everything they list which is enable smtp authentication in my email client cause it is said that you must authenticate before sending. Have done all that and no matter what when i try to send...sometimes i get this error. I have a bunch of forwarding domains setup and thought that may be the cause. But really I think it is cpanel bug and forget about help from them so I am turning to anyone that may have fixed this issue
I am unable to mount the 2nd disk's extended partition. Please help.
Commands I tried and returns....
Quote:
mount -t ext2 /dev/hdd2 /second mount: wrong fs type, bad option, bad superblock on /dev/hdd2, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so
Quote:
mount -t ext3 /dev/hdd2 /second mount: wrong fs type, bad option, bad superblock on /dev/hdd2, missing codepage or other error In some cases useful info is found in syslog - try dmesg | tail or so
Also I tried to add it to /etc/fstab but it says the same error, Disk /dev/hdd2 doesn't contain a valid partition table... I am able to mount /dev/hdd1 successfully.
I'm an existing customer of Hosting Company X and notice that they have recently launched an offer that is a higher config than what I have right now, at the same price.
When asked about it, I was refused the higher config citing that new offers are not applicable for existing customers. I've been with them for over a year and have been experiencing very good support from them, but this one issue baffles me.
I have this customer who have been having trouble to receive some emails from valid senders due to Sender verify failed, both senders have valid accounts.
Here is an example,
De: MDaemon at zeus.XServer.com [mailto:MDaemon@zeus.XServer.com] Enviado el: sábado, 17 de noviembre de 2007 11:16 a.m. Para: albertocarbone@XServer.com Asunto: Error permanente de entrega
Failed address: jsoler@CustomerDomain.com
--- Session Transcript --- Sat 2007-11-17 11:15:19: Parsing message [xxxxxxxxxxxxxxxxxxxxxxxxpd35000148823.msg] Sat 2007-11-17 11:15:19: * From: albertocarbone@XServer.com Sat 2007-11-17 11:15:19: * To: jsoler@CustomerDomain.com Sat 2007-11-17 11:15:19: * Subject: RE: Zona Franca.- Concepto.- Sat 2007-11-17 11:15:19: * Message-ID: [003201c82934$ba953d00$2fbfb700$@com] Sat 2007-11-17 11:15:19: Intentando SMTP conexión con [CustomerDomain.com] Sat 2007-11-17 11:15:19: Resolviendo registros MX para [ CustomerDomain.com] (Servidor DNS: 200.118.2.66)... Sat 2007-11-17 11:15:23: * P=000 S=000 D=CustomerDomain.com TTL=(240) MX=[ CustomerDomain.com] {xx.xxx.13.172} Sat 2007-11-17 11:15:23: Intentando SMTP conexión con [xx.xxx.13.172:25] Sat 2007-11-17 11:15:23: Esperando la conexión del socket... Sat 2007-11-17 11:15:23: * Conexión establecida (xx.yyy.51.30:3948 -] xx.xxx.13.172:25) Sat 2007-11-17 11:15:23: Esperando la iniciación del protocolo... Sat 2007-11-17 11:15:25: [-- 220-svr01.customerDomainHost.com ESMTP Exim 4.68 #1 Sat, 17 Nov 2007 11:15:29 -0500 Sat 2007-11-17 11:15:25: [-- 220-We do not authorize the use of this system to transport unsolicited, Sat 2007-11-17 11:15:25: [-- 220 and/or bulk e-mail. Sat 2007-11-17 11:15:25: --] EHLO zeus.XServer.com Sat 2007-11-17 11:15:25: [-- 250-svr01.customerDomainHost.com Hello zeus.XServer.com [xx.yyy.51.30] Sat 2007-11-17 11:15:25: [-- 250-SIZE 52428800 Sat 2007-11-17 11:15:25: [-- 250-PIPELINING Sat 2007-11-17 11:15:25: [-- 250-AUTH PLAIN LOGIN Sat 2007-11-17 11:15:25: [-- 250-STARTTLS Sat 2007-11-17 11:15:25: [-- 250 HELP Sat 2007-11-17 11:15:25: --] STARTTLS Sat 2007-11-17 11:15:26: [-- 220 TLS go ahead Sat 2007-11-17 11:15:26: SSL negotiation successful (TLS 1.0, 1024 bit key exchange, 128 bit RC4 encryption) Sat 2007-11-17 11:15:26: --] EHLO zeus.XServer.com Sat 2007-11-17 11:15:26: [-- 250-svr01.customerDomainHost.com Hello zeus.XServer.com [xx.yyy.51.30] Sat 2007-11-17 11:15:26: [-- 250-SIZE 52428800 Sat 2007-11-17 11:15:26: [-- 250-PIPELINING Sat 2007-11-17 11:15:26: [-- 250-AUTH PLAIN LOGIN Sat 2007-11-17 11:15:26: [-- 250 HELP Sat 2007-11-17 11:15:26: --] MAIL From:[ albertocarbone@XServer.com [mailto:albertocarbone@XServer.com] ] SIZE=23231 Sat 2007-11-17 11:15:26: [-- 250 OK Sat 2007-11-17 11:15:26: --] RCPT To:[jsoler@CustomerDomain.com] Sat 2007-11-17 11:15:30: [-- 550-Verification failed for [albertocarbone@XServer.com] Sat 2007-11-17 11:15:30: [-- 550-Called: 82.165.181.92 Sat 2007-11-17 11:15:30: [-- 550-Sent: RCPT TO:[albertocarbone@XServer.com] Sat 2007-11-17 11:15:30: [-- 550-Response: 550 Backscatter Protection detected an invalid or expired email address Sat 2007-11-17 11:15:30: [-- 550 Sender verify failed Sat 2007-11-17 11:15:30: --] QUIT --- End Transcript ---
For the last 5 days, exim has been retrying to resend email to a recipent every 1 millisecond.
As result, logs are huge, and load is being affected.
So I'd like to know how can I set/configure exim to ingore sending to any email I'd tell it.
I mean is there any config file I can look into, to set a ignore list, or even how to have it so that it retries sending every 1 hour, instead of every 1 millisecond.
I use PLESK 11 on one of my servers, and use NS.mydomain & NS1.mydomain, everything works fine, DNS Zones are OK, reverse DNS is OK...
Except on MXTOOLBOX this :
SMTP Valid Hostname > Reverse DNS is not a valid Hostname SMTP Reverse > DNS Mismatch OK - 195.154.XXX.XXX resolves to mydomain.eu SMTP Banner Check > OK - Reverse DNS matches SMTP Banner
Tried so many searches on Google, but no response and always 3 same pages from MXTOOLBOX.
I migrated IP of this server in datacenter, because they ask us to do it, so in /etc/hosts for example I found old IP, I changed it, restart network interface, but always the same thing... postfix too (changed IP and restart).
I am having complains from our clients that their mails are always going to spam folders istead of inbox. I decided to have some tests and find out problems which couse the issue and solve them. We have PTR records correctly, Our IPs and domain names are not listed in any blacklists, And I checked "Use DomainKeys" checkbox for all our domains in mail settings.
These were all good and thought that all works well untill I ran a test on [URL].....
I opened a mail file (.MAI) and copied all content (with headers, contents and all) to that site and got a result like;
pts rule name description ---- ---------------------- --------------------------------------------------- 0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [95.108.252.17 listed in list.dnswl.org] 0.0 URIBL_BLOCKED ADMINISTRATOR NOTICE: The query to URIBL was blocked.
[Code] ....
The 3rd line from the last confused me. "Message has a DKIM or DK signature, not necessarily valid" and "DKIM-Signature header exists but is not valid" parts of that report put a question in mind. Does the "Use DomainKeys" checkbox in the Plesk Panel really working? I mean, it creates all the DNS entries and all, but the email message is starting with a line "DomainKey-Status: no signature" and that supports the 2nd line from the last in that report.
The question is, what should I do to make DomainKeys work as it should? I am using the latest 11.5.30 Update #23 of Plesk Panel for Windows on a Windows 2012 Standart server with MainEnable Enterprise Premium. Enterprise version of MainEnable also has DKIM settings available for all the domains in its own panel, but it's disabled because I didn't set anything in there.
Is there a command i can type into the ssh console to stop a current transfer that i started wit the wget command?
the file im wgeting always stuffs up at 51% but then the server just retries and starts again, its done it 3 times so far and i just want to completely cancle the process if possible....
My server has plesk 12 with Ubuntu.The problem I have is that the messages go with a valid domain keys signature, but without the DKIM signature.I'm not using opendkim.
yum -y groupinstall kde Loading "priorities" plugin Setting up Group Process Setting up repositories Cannot find a valid baseurl for repo: update Error: Cannot find a valid baseurl for repo: update
what is this? what ever i try to install i get this weird error..
I have 100+ sites on this hard drive, and one site in particular that meant the world to me.
My host sent the drive to Gillware first, but they failed saying that the file system was so severely damaged that they could not recover anything.
Then shortly after, my host sent it to DriveSavers, a very well-known company, but they also FAILED.
I'm extremely depressed because of this. Please don't post if you're going to say "make sure you do backups next time" because I've heard it 504329504395 times now, and while I do realize my mistake, saying that does NOT help me.
I am willing to spend ALOT to get my sites back. I still have hope. Are there any other companies out there BETTER than DriveSavers? Assuming that you'd still have hope even after two companies failed, where you would you go or what would you do?
How can I find the data transfer rate on the server. I have done ifconfig -a , it display the amout of data has been received and transfered. I want to see the live data transfer date. Can I able to check it?
for example my current path in server is root@server [/home/user1/public_html/upload]# and i wanna copy every thing inside directory upload to /home/user1/public_html/ but when i used this command root@server [/home/user1/public_html/upload]#cp -r -f *.* /home/user1/public_html/
then it just copy files . is there is any way to copy folder as well?
Im using the 'top' command on my server to view the memory and cpu usage, to save me sitting in front of my pc for hours looking at it, is there any way I can save it to a text file for viewing later on
