Open_basedir Line.

Jun 3, 2007

to append the directory that the accounting.php.inc file is located in to the open_basedir line.

How do i do it, where n how do i make these changes.

View 6 Replies


ADVERTISEMENT

Open_basedir Off

Apr 20, 2009

I have dedicated server and my panel is lxadmin.

Anybody know how can i make off on php.ini the open_basedir ?

I have to install one script on my server this open_basedir have to be disable.

View 5 Replies View Related

Open_basedir In Php 4.4.6

Apr 25, 2007

I've just upgraded my apache install to Apache 2.0.59 and PHP 4.4.6 and suddenly open_basedir has stopped working. I have an open_basedir setting in each vhost configuration that used to work fine on php 4.3.9, now upgraded it thinks there is no path specified and I'm getting the usual failures where my scripts are not allowed to write to a directory.

Has anyone else seen this or knows what's happening? I'm on 64-bit Centos 4.4

View 4 Replies View Related

Squirrelmail And Open_basedir

Apr 14, 2009

I got a VPS with CentOs installed and it is using LxAdmin and i got this problem:

I installed Squirrelmail but it isn't working because open_basedir is enabled.

I do not want to disable open_basedir,

View 0 Replies View Related

Is Anything Other Than Open_basedir Even Needed?

Dec 9, 2008

Assuming that an account on my server is hacked into, is open_basedir enough to protect other users on the same server? I would assume so, since php would not have access to those other accounts? Why is suphp needed?

Ofcourse, I also disabled dynamic loading of modules (apache) and added some disable_functions list.

View 3 Replies View Related

Open_basedir , Safe_mode

Feb 1, 2008

when I make open_basedir effect in whm > security center

I have in my script this problem :

Warning: tempnam() [function.tempnam]: open_basedir restriction in effect. File() is not within the allowed path(s): (/home/xxxx/:/usr/lib/php:/usr/local/lib/php:/tmp) in /admincp/misc.php on line 685Warning: fwrite(): supplied argument is not a valid stream resource in /admincp/misc.php on line 688Warning: fclose(): supplied argument is not a valid stream resource in /admincp/misc.php on line 689 

when I disable it I have this other one problem :

Warning: fopen() [function.fopen]: SAFE MODE Restriction in effect. The script whose uid is 32010 is not allowed to access /tmp/vbthumbLTfVOk owned by uid ..

View 2 Replies View Related

Turn Off Open_basedir

Mar 31, 2008

How can I turn off open_basedir completely from within .htaccess?

I'm finding conflicting advice on how this can be done, or even if it can.

View 13 Replies View Related

Open_Basedir Configuration

May 17, 2007

I can't correct configure the open_basedir. Safe_mode on server is enabled. Now path to accounts is: /var/www/webx/ . I would like change this path to /webx/ On server are some accounts. How can I do it?

What I did:

-> I set path in php.ini file (/etc/php4/apache2) in open_basedir = line to:
/webx/ and /var/www/webx/ too. Without effect.

-> I added
<Directory /webx/>
php_admin_value open_basedir /webx/
</Directory>

in /etc/apache2/apach2.conf and /etc/apache2/confixx_mhost.conf

Without effect.

After any change I was restarting the apache service through /etc/init.d/apache2 restart, of course.

View 1 Replies View Related

Open_basedir Restriction

Oct 14, 2007

About the 29th of last month my crons quit working properly, they are still ran but they did nothing.. I finally found out that its giving me an open_basedir error...

I am trying to run the crons from /home/<user>/crons/...
The first few lines of the PHP Code includes some required files that are used by the rest of the site...

PHP Code:

$root_path = "/home/<user>/public_html/";
include($root_path . "includes/common.php"); 

However, when the cron is ran I get the following email...

Quote:

X-Powered-By: PHP/5.2.1
Content-type: text/html

Warning: include() [function.include]: open_basedir restriction in effect. File(/home/<user>/public_html/includes/common.php) is not within the allowed path(s): (0) in /home/<user>/public_html/live.php on line 7

Warning: include(/home/<user>/public_html/includes/common.php) [function.include]: failed to open stream: Operation not permitted in /home/<user>/public_html/live.php on line 7

Warning: include() [function.include]: Failed opening '/home/<user>/public_html/includes/common.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/<user>/public_html/live.php on line 7
test
Notice: Undefined variable: db in /home/<user>/public_html/live.php on line 11

Fatal error: Call to a member function query() on a non-object in /home/<user>/public_html/live.php on line 11

WHM 11.11.0 cPanel 11.15.0-R17665
CENTOS Enterprise 4.5 i686 on standard - WHM X v3.1.0
Apache version1.3.39 (Unix)
PHP version5.2.1
MySQL version4.1.22-standard

(Paths have the correct username, I replaced the usernames with <user>...)

View 5 Replies View Related

How To Configure Open_basedir

Sep 26, 2007

I want to include script wpisz.php from /srv/www/vhosts/default/htdocs into /srv/www/vhosts/domena.pl/httpdocs/, but i recive this error:

Code:
Warning: main() [function.main]: open_basedir restriction in effect. File(/srv/www/vhosts/domena.pl/httpdocs/wpisz.php) is not within the allowed path(s): (/srv/www/vhosts/default/htdocs:/tmp) in /srv/www/vhosts/default/htdocs/index.php on line 3

Warning: main(/srv/www/vhosts/domena.pl/httpdocs/wpisz.php) [function.main]: failed to open stream: Operation not permitted in /srv/www/vhosts/default/htdocs/index.php on line 3

Warning: main() [function.include]: Failed opening '/srv/www/vhosts/domena.pl/httpdocs/wpisz.php' for inclusion (include_path='.:/usr/share/php') in /srv/www/vhosts/default/htdocs/index.php on line 3

So, I ask you to help me to set it up (propably open_basedir) in that way in which will it work fine. But please.. use a simple language and describe the solution step-by-step because I'm not doing well whith this..

View 3 Replies View Related

Virtual Open_basedir

Oct 8, 2007

I'm running a apache2 webserver with php5 and vhost_alias.

I like to use open_basedir virtual:

VirtualDocumentRoot /www/%0
php_admin_value open_basedir "/www/%0:/usr/share/php:/tmp"

View 0 Replies View Related

Disable Open_basedir In Plesk

Aug 10, 2009

How to disable open_basedir in plesk enabled server. I want to disable it server wide.

View 7 Replies View Related

Safe Mode OFF And Open_basedir Set...

Jan 18, 2008

I am going to run a free host, yes I know I should post this in FWHT but well, they dont answer very fast if at all.

It is very dangerous to have Safe Mode OFF on a free host, but someone was telling me about open_basedir, which makes it so they cant touch any files set outside of open_basedir. Would this be suffiecient to keep them from touching others files? I know I need to disable other functions like exec() and stuff but would open_basedir keep hackers away from others files and hacking them...

View 7 Replies View Related

Open_basedir With Virtual Host

Feb 5, 2008

I am trying to do open_basedir in my httpd.conf file using wildcards so I dont have to set it up for EACH account.

Here is my Virtual Host part in my conf:

<VirtualHost *>
VirtualDocumentRoot /www/%2+/%1.1/%1.2/%1.3/%1/htdocs/
RewriteEngine On
RewriteCond %{HTTP_HOST} ^www..*$
RewriteRule ^(.+) %{HTTP_HOST}$1 [C]
RewriteRule ^www.(.+) http://$1 [P]
RequestHeader unset Accept-Encoding
RequestHeader unset Content-Encoding
</VirtualHost>
I have tried putting:
php_admin_value open_basedir /www/%2+/%1.1/%1.2/%1.3/%1/htdocs/

But I get this error looking at ANY PAGE:

Fatal error: Can't load /www/fatehost.net/a/l/d/aldo/htdocs/{FILE_IM_ON}, open_basedir restriction. in Unknown on line 0

View 4 Replies View Related

Cpanel PHP Open_basedir Tweak

May 10, 2008

if i enable PHP open_basedir Tweak in cpanel, it disables all sites and none load, do note that the other tweak called Apache mod_userdir Tweak is also enabled.

Now i am wondering is if they both clash with each other to compete for the security ?

Anyone else noticed this also?

Info :
WHM 11.15.0 cPanel 11.18.6-S24255
CENTOS Enterprise 5 i686 on standard - WHM X v3.1.0

View 4 Replies View Related

Open_basedir + CURL FOLLOW_LOCATION

Oct 23, 2007

Is there a way to configure the open_basedir to allow cURL to FOLLOW_LOCATION? I'd like to keep the open_basedir enabled for security but at the same time, I need my site to function properly and that's not a possibility with FOLLOW_LOCATION not working.

View 6 Replies View Related

Chdir Not Working Due To Open_basedir Restriction

Feb 21, 2008

I am trying to use chdir() in one of my scripts. However, I am getting an open_basedir restriction error. I have checked the php.ini and the value is not set (which as I understand should disable open_basedir).

View 4 Replies View Related

"open_basedir Restriction In Effect"

Jul 13, 2008

I've installed CRE Loaded 6.2 on one of my client accounts and am receiving the following error when trying to edit the language files:

Warning: tempnam(): open_basedir restriction in effect. File() is not within the allowed path(s): (/hsphere/local/home/hrtire:/tmp:/var/tmp:/usr/local/lib/php) in /hsphere/local/home/hrtire/hrtire.net/store/admin/edit_textdata.php on line 151

I've asked for support from my host and they told me that it can be fixed using .htaccess. They said to use:

php_value open_basedir /hsphere/local/home/hrtire/hrtire.net/store/admin/

That doesn't fix the problem and I'm not getting any more responses from them. I've tried variations (e.g. .../store/, .../store/tmp/) and nothing works.

View 6 Replies View Related

Zip From Command Line

Feb 15, 2009

Im trying to zip up an sqlite database backup.

I execute this command

Code:
zip ../d/db/backup.zip ../d/db/09-02-15.sqlite
backup.zip never appears. Instead, I get some random filename in the directory. Like ziOHokOw

If I try to zip a smaller file(last weeks backup) everything runs fine?

Code:
zip ../d/db/backup.zip ../d/db/09-02-08.sqlite
So the 134mb file zips fine, but the 200mb one seems like its failing and im left with some type of temporary file. I tried downloading the weird filename and unzipping it. It has partial info like directory structure, the filename but the actual file inside is corrupt.

View 1 Replies View Related

A Line In My Crontab :: 0 7-23/3 * * * Top.sh?

Jan 13, 2008

I found this line in my crontab file

0 7-23/3 * * * top.sh

when it's running?

and what is it doing?

View 6 Replies View Related

What Is The Command Line

May 10, 2008

What is the Command Line, hoe do I get to it, when I do how do I update Perl to 5.88

View 5 Replies View Related

New Internet Line

Jan 15, 2007

i have a win 2003 server and iis6

i have about 300 sites i will change my internet line

to change all web sites ip's to new ip in iis how can i do that?

View 0 Replies View Related

1Gbps Dedicated Line What Does That Mean?

Jun 28, 2008

I do not understand what network: 5 mbps and the traffic 1Gbps mean

=========
CPU Intel Core2-Duo E4500
2.2GHz-FSB 800MHz -L2 2MB

RAM DDR2 PC2-5300 (667Mhz) 2GB
HDD SATA2 250GB (7,200rpm)
LANcard Intel PRO/1000 PF Server Adapter
Rack Type 1U (4.5cm)
Network: 5Mbps
Traffic 1Gbps Dedicated Line
=======

View 12 Replies View Related

$100 Servers On 1 Gbit/s Line

Nov 4, 2009

I remember some companies were offering servers on 1 gbit/s line and 10 TB of bandwidth for $100/month. Or did I dream this one up?

iweb was offering 10 TB/month servers for $99 (I don't remember if it was 100mbit/s or 1 gbit/s line though), they don't seem to offer this anymore.

View 6 Replies View Related

Security Question Regarding T1 Line ..

Jan 14, 2009

This is our setup: We have two locations about 120 miles apart. We have direct connection with a T1 line.

My question: How much safer is our data passing through the same T1 everyone else is using. Most people sending data through the same T1 line are using ISP, so are safer by not using an ISP? .........

View 5 Replies View Related

Linux Get Last Line Of Output

Apr 4, 2008

What command could I use to get the last line of an output?

Heres why...

I use this command:

netstat -plan|grep :80|awk {'print $5'}|cut -d: -f 1|sort|uniq -c|sort -nk 1
I would like to get just the last line of the output, the output looks like this:

1 203.118.105.*
1 80.195.165.*
1 87.211.51.*
1 91.40.90.*
8 82.2.222.*
213

The reason is because I'd like to get that last figure to place into a file on a certain time period (through a cron), which will then be graphed with PHP.

View 3 Replies View Related

Ip Adjustment Via Command Line

Feb 9, 2008

Got a centos / cpanel box. Had to change the block of IP's with an entirely new block of 8. Problem is I cannot access cpanel/whm due to this, but only via ssh. If I run the below, it shows the old IP's

/etc/init.d/ipaliases start

How do I replace the old block with the new? I've never done it via command line before.

View 1 Replies View Related

Trixbox Server Line

Aug 3, 2008

if anybody in the community looks for trixbox as the os to be installed on a dedicated server. I am looking for a new line of servers to provide and i am thinking that Trixbox could be one of them.

View 0 Replies View Related

If There's 2 Ethernet Line, How Will The Traffic Be Like

Jul 13, 2007

I've a rack in the datacentre, and actually sharing the ethernet line with another partner's rack.

Something like:

Bandwidth -> Switch 1 -> Switch 2 (partner's rack)
Bandwidth -> Switch 1 -> Switch 3 (my rack)

After a previous uplinks issue, i'm never able to hit above 4Mbps of download speed to my home's cable broadband anymore. I have no idea whether it's because my partner capped my bandwidth from Switch 1, or his usage has increased such that it's affecting my traffic too. I can't be too concerned about it with him, as he's paying the bulk of the bandwidth costs.

For the whole rack, i'm not able to hit above 5Mbps accumulatively, and my normal bandwidth usage is only about 1-2Mbps.

So i'm thinking of getting another line for bandwidth directly from the datacentre to my Switch 3, perhaps starting from just 1-2Mbps only.

How will things improve? Just a silly thought, whether my total available bandwidth can now be 5Mbps + 2Mbps = 7Mbps.

View 10 Replies View Related

Configuring Apache To Run Php Without Shebang Line

Aug 15, 2005

I posted this problem in the PHP forum without a response. I thought this forum might be better.

View 0 Replies View Related

Reset Password With Single Line

Jul 18, 2009

how to reset a password via a single line command? Or script? To make it automated?

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved