I remember some companies were offering servers on 1 gbit/s line and 10 TB of bandwidth for $100/month. Or did I dream this one up?
iweb was offering 10 TB/month servers for $99 (I don't remember if it was 100mbit/s or 1 gbit/s line though), they don't seem to offer this anymore.
which eu hosts offer gbit servers?
View 4 Replies View RelatedI have a lot of questions here so if you can't answer them all I understand. even pointing me somewhere where I could get the answers would be appreciated; hardware sites focusing on server hardware, forums focusing on such, etc.
we plan to have three different types of servers:
- db server (self explanatory. mysql. for forums, mysql driven sites.)
- file server (lots of files around ~2-10MB, consistant 70mbps right now, but we want more room for upgrades. needs a LOT of storage room.)
- web server (lots of php files, but also static things like plain html, images, etc. also includes all misc services for the setup-- dns, etc.)
could I be given a rundown for which hardware each of the three should have? I don't need specifics, even just knowing that more ram is important here while cpu doesn't matter as much, or that the fastest disks available are a must, etc would all be valuable info for me. despite that, I certainly wouldn't mind specific hypothetical hardware configs.
for the database server I'm assuming the more ram the better. not entirely sure about the cpu? also not positive on disks...
for the fileserver, how much ram would be practical or useful? disk io will be an issue I'm because plenty of people will be pulling files at once so the disk needs to read from multiple places. scsi (and even raptors) are not an option as we need 750GB+ of space on a reasonable budget. more ram will take some load of of the disks, but how much is neccessary / reasonable?
for the web server I'm assuming cpu first, then ram, but it'll likely need less ram than the db server?
I'm more lost on the disks than anything. scsi on the fileserver is not an option under any circumstances due to $/GB. for the db & web server I'm willing to pay for scsi if the performance increase really does warrant the extra money, but I'd like to be convinced before shelling it out. if you have benchmarks geared at server hardware when it comes to disks I'd really appreciate it.
also, what's the best way to network these together when colocated? each one with a dual gigabit ethernet port and then the communications go to and from the router?
Im trying to zip up an sqlite database backup.
I execute this command
Code:
zip ../d/db/backup.zip ../d/db/09-02-15.sqlite
backup.zip never appears. Instead, I get some random filename in the directory. Like ziOHokOw
If I try to zip a smaller file(last weeks backup) everything runs fine?
Code:
zip ../d/db/backup.zip ../d/db/09-02-08.sqlite
So the 134mb file zips fine, but the 200mb one seems like its failing and im left with some type of temporary file. I tried downloading the weird filename and unzipping it. It has partial info like directory structure, the filename but the actual file inside is corrupt.
I found this line in my crontab file
0 7-23/3 * * * top.sh
when it's running?
and what is it doing?
What is the Command Line, hoe do I get to it, when I do how do I update Perl to 5.88
View 5 Replies View Relatedto append the directory that the accounting.php.inc file is located in to the open_basedir line.
How do i do it, where n how do i make these changes.
i have a win 2003 server and iis6
i have about 300 sites i will change my internet line
to change all web sites ip's to new ip in iis how can i do that?
I do not understand what network: 5 mbps and the traffic 1Gbps mean
=========
CPU Intel Core2-Duo E4500
2.2GHz-FSB 800MHz -L2 2MB
RAM DDR2 PC2-5300 (667Mhz) 2GB
HDD SATA2 250GB (7,200rpm)
LANcard Intel PRO/1000 PF Server Adapter
Rack Type 1U (4.5cm)
Network: 5Mbps
Traffic 1Gbps Dedicated Line
=======
This is our setup: We have two locations about 120 miles apart. We have direct connection with a T1 line.
My question: How much safer is our data passing through the same T1 everyone else is using. Most people sending data through the same T1 line are using ISP, so are safer by not using an ISP? .........
What command could I use to get the last line of an output?
Heres why...
I use this command:
netstat -plan|grep :80|awk {'print $5'}|cut -d: -f 1|sort|uniq -c|sort -nk 1
I would like to get just the last line of the output, the output looks like this:
1 203.118.105.*
1 80.195.165.*
1 87.211.51.*
1 91.40.90.*
8 82.2.222.*
213
The reason is because I'd like to get that last figure to place into a file on a certain time period (through a cron), which will then be graphed with PHP.
Got a centos / cpanel box. Had to change the block of IP's with an entirely new block of 8. Problem is I cannot access cpanel/whm due to this, but only via ssh. If I run the below, it shows the old IP's
/etc/init.d/ipaliases start
How do I replace the old block with the new? I've never done it via command line before.
if anybody in the community looks for trixbox as the os to be installed on a dedicated server. I am looking for a new line of servers to provide and i am thinking that Trixbox could be one of them.
View 0 Replies View RelatedI've a rack in the datacentre, and actually sharing the ethernet line with another partner's rack.
Something like:
Bandwidth -> Switch 1 -> Switch 2 (partner's rack)
Bandwidth -> Switch 1 -> Switch 3 (my rack)
After a previous uplinks issue, i'm never able to hit above 4Mbps of download speed to my home's cable broadband anymore. I have no idea whether it's because my partner capped my bandwidth from Switch 1, or his usage has increased such that it's affecting my traffic too. I can't be too concerned about it with him, as he's paying the bulk of the bandwidth costs.
For the whole rack, i'm not able to hit above 5Mbps accumulatively, and my normal bandwidth usage is only about 1-2Mbps.
So i'm thinking of getting another line for bandwidth directly from the datacentre to my Switch 3, perhaps starting from just 1-2Mbps only.
How will things improve? Just a silly thought, whether my total available bandwidth can now be 5Mbps + 2Mbps = 7Mbps.
I posted this problem in the PHP forum without a response. I thought this forum might be better.
View 0 Replies View Relatedhow to reset a password via a single line command? Or script? To make it automated?
View 14 Replies View Relatedhow i can install SVN by command line on centos OS
View 1 Replies View Relatedis KVMoIP like Remote Desktop or is it just command lines?
View 5 Replies View RelatedI just moved to a new server and latly I've seen my mail going out like this:
071 Subject: =?iso-8859-1?B?U3BlZWRFYXJuZXIgUG9pbnQgRW1haWwgZm9yIHJhZmFu?=
039* Return-Path: Fast_Lane@XXXX.com
074F From: "=?iso-8859-1?B?U3BlZWRFYXJuZXIuY29t?=" <Fast_Lane@XXXX.com>
Using Exim 4 and that was the same as my old server. I also moved the exim.conf file over to the new server to see if that would fix it, but it didn't.
This is my current hosting
Virtual Server - $60/Month
100GB disk
1 CPU
512MB dedicated RAM
768MB shared RAM
100mbit unmetered connection
Now, I totally bombed the b/w. I am looking for a webhost that will allow 50-60mbps.
I will be hosting anime, which is unlicensed.
I have a load of PHP files that need trimming down, so for example
Code:
<html>
<?php
$loads_of_stuff = 1231231;
?>
</html>
change to
Code:
<html>
<?php
$loads_of_stuff = 1231231;
?>
</html>
There are 000's of lines, so some awk command or something similiar would be great to execute on each file.
I have been looking around for a new shared host, I am currently with GoDaddy =( And it would be helpful to have command line access for some things I am trying to do.
Particularly with Zend Gdata API (which GoDaddy has trouble with anyway) Is this reasonable to ask for? I also need at least 150GB/month bandwidth for some relatively high quality streaming video.
We have a dedicated server, with chroot access enabled.
We are wanting to backup each site on this server, as well as all mysql dbs on a weekly basis.
Is it possible for us to run a cron job to do this? If so, what commands would we want to use?
We have a local FTP server here, so would like to ftp these backups this machine.
I know it all sounds a little vague, but I just need to know where to get started.
I'm running CentOS with a postfix mail server.
I haven't experienced mail problems on other CMS systems - so the basic setup should be working okay - but apparently not that well.
I get the famous emailer.php line 234 error when some users send PMs to each other... The PMs go through, but the error is annoying none the less.
Does anyone have a decent solution for this?
The phpbb community advise to make a Google search (http://www.google.com/search?q=configuring+php+mail ) or use SMTP just don't do it for me - and I don't want to leave some big hole for spammers.
This might win me the "stupidest idea 2008" award but I was wondering..
I have an active ADSL line at home but I don't have an active account at an ISP.. Could I somehow get Internet access through my VPS (for a week or so, till my new ISP activates my account)?
Back in the day, there was a commandline version of 'ntop' allowing a view of live traffic stats in the format of 'top'.
Does a similar tool exist today effectively allowing us to figure our which VPS or IP address is under DDoS attack?
The only way I could fix this was via KVM access to netstat -an | grep etc... Not too
I just wanted to warn the rest of you as to my experiences with Limestone Networks.
I've been calling them for half an hour now, and just keep getting a voice mail box.
This is on top of the fact that the reason I'm calling it to check up on a ticket I submitted weeks ago which is still unresolved (they go for days without answering it, and then when I poke them about it they comment and disappear again for days).
What is really disappointing is that all of this is after I spoke to one of their lead guys there, who gave me his email address and told me to bring any issues to him if I still had problems with the support. I sent him an email last week, and never got a response.
So, if you're looking for excellent prices, great machines, an excellent control panel, and to be blown off my support, Limestone Networks is someone you should check out.
Due to spammer activity, I find myself with 20,000 messages in the queue and I'd really like to remove those emails from the queue as it is causing delays to good messages.
Can you give me the SSH command to remove messages by subject line please?
I have already used
exim -bpru|grep frozen|awk {'print $3'}|xargs exim -Mrm
and
exiqgrep -i -f '<>' | xargs exim -Mrm
and
exim -bpu |awk '/nobody/ {print $3} ' |xargs exim -Mrm
But there are still 11,000 messages left in the queue.
The spammer messages have the following subject lines:
IS THIS TRUE?
PAYMENT UPDATE
Online Banking Account Is Locked !
Online Banking has been locked
ARE STILL ALIVE /THIS A SAD NEWS ABOUT YOU
I got our server staff to install BackupPC on our dedicated server and run daily backups. All is well (from what I can tell) but i've come to a point where I want to actually use an archived file.
So I jump into my ftp client, navigate to the backup folder, and download the file. The problem is, the file reads as jibberish. I'm assuming that BackupPC has compressed it.
So the question is two-fold:
1. How do I decompress it on windows (command line stuff is well beyond me)
2. Is there any browser/windows apps that I can use to manage the backups?
i'm trying to look for a reliable server host where i need 1 Xeon server with a dedicated 100Mbps private bandwidth, can anyone advice or provide some kind of price quote so that i know what kinda range i'm looking at? i got sth from burstnet which is around 1300$/month for 100Mbps private.
View 3 Replies View Related