I have problem with free space on one partition. After deleting files on about 10GB "df" still shows about 100% used but when I count files by "du" then it show correct value. Where's the problem and how fix it ?
root@alfa [~]# du -sh /usr
9.1G /usr
root@alfa [~]# df -h /usr
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb3 20G 19G 0 100% /usr
when i try to Terminate an Account this message appears
The /var partition on this server is running out of disk space. WHM operation has been temporarily suspended to prevent something bad from happening. Please ask your system admin to remove any files not in use on that partition.
i know its coz the /var is full
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 9.9G 1.6G 7.8G 17% /
/dev/sda1 99M 21M 73M 23% /boot
/dev/sda7 198G 32G 157G 17% /home
/dev/sda3 9.9G 3.5G 6.0G 37% /usr
/dev/sda2 9.9G 9.3G 121M 99% /var
/dev/sdb 231G 103G 116G 48% /backup
none 2.0G 4.0K 2.0G 1% /tmp
none 2.0G 0 2.0G 0% /var/tmp
none 2.0G 0 2.0G 0% /dev/shm
the var is 99%
I have a dedicated server with 80 GB H.D.D and host one site, this site have about 11GB files and about 10GB data base but every time I check the free space of my hard , the disk is full! what's the problem?
my server in Linux and control panel is cPanel
i'm using plesk 11.5..i've deleted a huge file of 15Go and i've still a message about free space on ther server...MySQL query failed: Got error 28 from storage engineClick to expand...
View 2 Replies View RelatedWe have Plesk installed with a dedicated disk on /opt. System disk is about 20 GB, data disk is about 220 Gb.There is 190 Gb free on the data disk (mounted on /opt).
But when we try to increase allocated space for a domain, Plesk says that there's enough disk space..Is there any change or adjustement on Plesk we can do, so Plesk will check space on the good disk ?
We had many backups stored on our Plesk 12 server about 51 GB in total.
After reducing the backups back to 10 GB by removing old backups through the Backup Manager.
The issue is that Health Monitor still reported that there was low diskspace displayed by color yellow. And it look Health Monitor over 16 minutes to change the alarm level from Yellow to Green
However the statistics at the specific subscription still present the Backup usage of 51 GB's whilest they are no longer there.
What can i do about this in order to speed up the synchronization?
I have a disk in raid, but it seems raid is not working correctly. I took it out, and plug into another server without raid. However, fdisk shows error
Quote:
#fdisk /dev/sdb
device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 20023.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
Should I correct the partition table now, or should I put it in another raid for checking?
One of my customers asked me if is possible technically to offer free email services.
Since he's going to launch a big portal he want to offer such things later, for all users.
Now, there are problems as:
a) if there is any possibility to compress emails similar with GMAIL or YahooMail or so, because i can't imagine the email is uncompressed
b) how can be handled email boxes over multiple (mail ?) servers if the HDD space needed would be larger than for one server HDD ?
i have centos 5 server i want install xen on it on my server is just one partion how may i resize this partion( without format partion/with put delete data) and then create lvm partion?
View 0 Replies View Relatedim running out of space on one of my sites but i have more then plenty of data transfer.
Unfortunately my hosting packaged it weird where they provide not enough hd space. Im trying to figure out is there a way where i can use another server or hosting company that can provide space only and use their servers just for space?
i think amazon.com offered this but wasnt sure how exactly this works.
Apache 2.2.25 on windows 32
I have a ProxyPass that looks like
ProxyPass /Share Documents http://partner2/Shared Documents/
But Apache will not start with spaces. I tried
ProxyPass /Shared%20Documents http://partner2/Shared%20Documents/
Apache would start but the passthrough doesn't work. What do I need to do? I have several url's with spaces.
Do you think if a company offered free web hosting and free domains people would snap them up like there is no tommorow?
Also does anyone one how much ICANN acredited registrars pay ICANN when they register a new domain?
any feedback would be great!
Simplehelix offers a 128/256 bit RapidSSL Certificate for just $99.95/year. In addition, this certificate comes with a year of dedicated IP address with free installation.
Do you think the conditions are normal?
which case is more preferred: a shared web hosting service with unlimited space/bandwidth, or a dedicated one with limited space/bandwidth?
View 4 Replies View Relatedwe can able create lVM partition but just we have 9 GB lvm partition i cant create more than or use full disk space
Code:
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 91201 732572001 8e Linux LVM
I have migrated one raptor disk to a 4 raptor raid 10 disks.
I was threated to being blocked from their helpdesk because they say it is a hardware issue.
I need help on 3 things:
- Is possible to just create a new partition on the not used drive ?
- Is this a software or hardware issue ?
- Can you recommend another support in case i am banned from the actual support ?
> root@server01 [~]# fdisk -l
>
>
>
> Disk /dev/sda: 299.9 GB, 299978719232 bytes
>
> 255 heads, 63 sectors/track, 36470 cylinders
>
> Units = cylinders of 16065 * 512 = 8225280 bytes
>
>
>
> Device Boot Start End Blocks Id System
>
> /dev/sda1 * 1 13 104391 83 Linux
>
> /dev/sda2 14 268 2048287+ 82 Linux swap / Solaris
>
> /dev/sda3 269 395 1020127+ 83 Linux
>
> /dev/sda4 396 18235 143299800 85 Linux extended
>
> /dev/sda5 396 18235 143299768+ 83 Linux
How can i create a /tmp partition (as cpanel recomends) in my openvz vps to install cpanel?
Quote:
/tmp 1 GB (1024 MB)
/ Grow to fill disk.
I have VPS Windows. I want to resize partition C 50Gb become 20Gb and then create partition D 30Gb for data , I used softwares Partition Manager 8.5 Enterprise Server Edition, Acronis Disk Director Server 10.0.2169 but I can't.
I used command line :
sfc /scannow
to check HDD on this VPS Server 2003 64b but can't too.
my DC has partitioned my server really complicated and im trying to install various different control panels and im running out of space, so id like to combine all my partitions into one.
How would i do this via SSH in centos 5.2?
i have problem and make all solution and the problem stay
the /usr partition is full 100%
i remove all logs in :
/usr/local/apache/logs
/usr/local/apache/domlogs
and make du -h --max-depth=1 in /usr that's the monitor :
Code:
76K ./doc
37M ./sbin
366M ./src
110M ./X11R6
14M ./php4
176K ./man
16K ./lost+found
24M ./evolution28
2.2G ./local
12K ./etc
19M ./libexec
1.2G ./share
62M ./include
181M ./bin
362M ./java
958M ./lib
1.4M ./kerberos
6.4G .
I'm trying to install CentOS5. Although the default partition should work fine for me, but I would like to create my own partition for /var, /usr/, /tmp, /swap, etc. Can you recommend me a good partion including the size. My server has 4GB RAM and 500GB SATA2 HDD. I don't use much space of HDD.
View 10 Replies View RelatedThe server I got from LayeredTech has two hard drives, obviously they set up the first hard drive with Linux etc.
The second hard drive is just there, not showing any partitions in 'fdisk' when I checked, so I assume they just leave it blank in every new server for the owner to deal with however they want.
I've been looking up guides to create a new partition for the full size of the hard drive and then mount it. However, it hasn't been very successful. Everytime I created the partition in fdisk, I have to set a size, and then when I mount it, it only says that the drive is ~98MB big.
Is there a way to partition the drive to its full capacity? And then mount it somewhere on the system? Or anywhere I can go to to find out easily?
I recently ordered a new dedicated machine and for some reason the guys set it up so the /home partition is a massive 250GB, and the / partition is a tiny 20GB. Since that's where all the plesk domains will be storing their files, I'd like to resize things a bit. I'm thinking of making the / partition 200GB and the rest for /home
It's a CentOS machine and the filesystems are ext3.
How can I do this resizing, and are there any caveats I should be aware of?
im assembling my server now....waiting on the 90degree connectors. It is as follows:
SUPERMICRO CSE-512L-260B Black 14" Mini 1U Server Case
ASUS M2N-MX SE Plus AM2+/AM2 NVIDIA GeForce 6100 Micro ATX AMD Motherboard
AMD Athlon 64 X2 4200+ Brisbane 2.2GHz Socket AM2 65W Dual-Core Processor
Dynatron A48G 70mm 2 Ball CPU Cooler - Retail
2gb ddr2 6400 ram
Seagate 500gb 7200.11 32mb hdd
WD 37gb raptor 10k rpm
the wd drive was lying around the house so i figured id add it since i had an extra slot and figured the speed wouldnt hurt.
My question is....how should i partition the drives.? I have 500+gb of space on 2 hard drives. I plan on using centos 5.1 and am downloading the iso now.
What would be an optimal security partioning scheme for a C2D server with a 160 gb HD
Usage for small web hosting company
I dont feel safe with the default setup that I have heard of with the company
If this is not in the right forum for this... I'm sorry didnt knew where else it may go.
I have to build a new server with RAID 1 and WHM/Cpanel installed (in fact i dont have to, but i need to learn ASAP and my boss gave me an old server for practice).
I've seen the installation guide of cpanel but the sizes of the partitions apply to a disk of 80 GB (i think so) so is there any way to calculate the size of the partitions, regardless of disk size? cuz mine are of 250 gb each.
I'm trying to install it on centos 5 on text mode, so far i have been able to successfully install the system (with partitions of any size... since is a test doesnt matter) with RAID 1.
After that i ran cat /proc/mdstat and in some partitions shows me this
Rsync=Delayed
I've read in some places that this is not a big issue... but in other places says it is... maybe i did something wrong
I've spent a while on google and the forums but couldnt find an answer to a question.
Is it possible to change the name of a partition in linux?
e.g. its currently called Disk /dev/mapper/VolGroup01-LogVol00 (/)
But i would rather name is something normal like /dev/sda1
Is this possible with out losing any data?
If so how can this be done?
My PHP/MySQL web application will be put in a unix/linux environment, and the guy who is setting up the server is asking me this:
Do you have any partition requirements?
I don't know too much about hardware, how should I answer him? do you have any suggestions?
I have 2 x250 gb disk on a server. What configuration would be the best for partition to run Plesk and webhosting on the server?
I want www files on 2nd disk and server is hosted at Softlayer that we can reload server from web interface.