Specific Config For A Blackberry

Jun 25, 2008

I have a customer that uses a blackberry and of course, he wants his email to be delivered in the BB, so is there any previous config or a specific port that needs to be opened, or anything else on the server?...please i have no idea about that x_X

i have a WHM/Cpanel on a Centos 5.1 and i work with exim

View 5 Replies


ADVERTISEMENT

IMAP E-Mail Issues With Blackberry's

Feb 29, 2008

I just moved to my first dedicated Server from a VPS. Now when I was on the VPS I had no problems receiving e-mails on my blackberry. Now, after the server move, I can not receive e-mails on my blackberry. Can someone give me some suggestions on how I should troubleshoot this?

View 8 Replies View Related

Apache :: How To Redirect Specific Useragent On Specific URLs

May 20, 2015

I have question: How to redirect specific useragent on specific URLs to specific URLs in .htaccess [Question]

E.g.:

I want to redirect 301 with conditional:

Code:
useragent: Firefox
from my url1: domain[dot]com/old-url1/
from my url2: domain[dot]com/old-url2/

to

Code:
to new url1: in my url1: domain[dot]com/new-url1/
to new url2: in my url1: domain[dot]com/new-url2/

I create this in my .htaccess but not work

Code:
RewriteEngine On
RewriteCond %{HTTP_USER_AGENT} googlebot [NC]
RewriteRule ^/?this-is-url/?$ domain[dot]com [L,R,NC]

View 1 Replies View Related

Specific VPS

Apr 28, 2007

I'm trying to build a distributed cluster of virtual hosts spanning the U.S.

My requirements for all of them are:
1. Very well connected - Tier 1
2. Able to run Gentoo Linux
3. OpenVZ/Virtuozzo/UML

I've got the southern half of the country covered. Can anyone refer me to such a provider in the northeast, anywhere above Washington; and another in the north-central cornfield states?

View 1 Replies View Related

Is Is Possible To Let The IP To Explain To Specific Dir Via SSH

Jun 11, 2009

Is is possible to let the IP to explain to specific dir via SSH?

I am using an VPS

View 2 Replies View Related

Block A Specific ISP

Jun 12, 2008

Is there any way to block a particular ISP? Have a visitor that changes IP hourly, but the IP always resolves back to a hostname like dsl.yuns.sksk.uk .

I have CSF installed. Any way to block all visitors from dsl.yuns.sksk.uk?

View 3 Replies View Related

Php.ini In A Specific Directory

May 23, 2007

php runs as cgi on my server, this, I cannot override settings with htaccess.

If I place a php.ini in a specific directory, will this directory' s php settings be override by this php.ini?

View 2 Replies View Related

Best Config For My.cnf

May 5, 2009

Server :

Code:
Intel C2Q Q9450
8196 MB DDR2 RAM
500 GB 7.200RPM
2000GB Transfer p/m
OS: CentOS 5.2

Code:
running a ipb forum site 2.3.4
current stats :
Our members have made a total of 245,827 posts
We have 14,673 registered members
Total number of topics is 75099
with atleast 150 members online + 200guests.

what would be the perfect my.cnf config for this kinda of a server? Im running litespeed.

View 4 Replies View Related

Cannot Run /bin/sh ./config.sub

Jan 3, 2008

I am trying to install a newer release of APC PHP cache on our server that runs RHES-4 and PHP 4.3.9

I installed version 3.0.14 some time ago and now cannot install the new v3.0.16. When I run ./configure I get this:
Quote:

[root@xxxx APC-3.0.16]# ./configure --enable-apc --enable-apc-mmap --with-apxs --with-php-config
configure: error: cannot run /bin/sh ./config.sub

The baffling thing is that I also cannot now reinstall 3.0.14 as it shows the same error.

I also get this error if I try to install XCache.

View 4 Replies View Related

CNAME To Specific Ports

Jul 4, 2007

I'd like to know how I can use DNS to do something like make a CNAME record that points the same address to different addresses based on the port used.

mail.example.org on port 80 points to ghs.google.com
mail.example.org on port 995 points to pop.gmail.com
mail.example.org on port 587 poitns to smtp.gmail.com

View 3 Replies View Related

Specific Dedicated Server

Sep 17, 2008

I own a Limited company in the UK and we are looking for a Dedicated server to put our shoutcast services on.

So far I have the following deal:

Quad Core Q6600 (4x 2.4Ghz)
2GB RAM
2x 250GB SATAII HDDs in RAID
Full Root Access
5TB Bandwidth per month
100Mbit network port (fully burstable)
£99.99 + VAT
Free setup
1 Month contract (30 Days Notice for Cancelation)

I am looking for a better deal than this with a reliable and well known supplier. We are a expanding company offering not only shoutcast but web hosting, web design and broadband.

The canditate host needs to be reliable and well known who can support us with no/little fees if we go over our alocated ammount.

If the host lives up to expectations there are future company prospects and business. We are looking for a 1 month contract as we have with long term intentions in mind should all be well with the host.

View 9 Replies View Related

Specific PHP Version For Vhost On Vps

Feb 7, 2008

I'm currently hosted on a friends VPS, and he has been good enough to give me his root access account details so I can mess with things if I need to. Good thing he has, too... Because I'm about to need to really mess with some things.

I've hit a brick wall, however.

The VPS is currently running php 4.3, but the CMS software that I am going to use to run my site requires PHP 5. Now, I don't want to arbitrarily update to php5 across the whole VPS, cause I dont know if thats going to knock out scripts on other vhosts. I read about the "run php5 as cgi" thing, but that doesnt really work for me, as the cms I am using has some quite in-depth url rewriting going on, and I dont want to have to make all of the php files for it end with .php5, in case that screws something up.

So, in my research, I came accross this:

wiki.apache.org/httpd/PHP4AndPHP5

The article on the apache wiki refers to a way of setting up a private server, or a VPS in this case, so that an individual vhost will use php5 as opposed to the default php4. "Great", I think... But then after loggin in to the shell and downloading the php-5.2.5 binary, I realised I dont have the first clue how I can install this, without it conflicting with the current PHP4 install, and so that it pick up on things like mySQL, and all the other libraries (gd, libxslt etc).

So, I guess my question is, does anyone know how I can accomplish this? I'm sorry if this isnt the right forum, I put it in the place that made most sense to me... Any help would be gratefully received, as I'm completely dumbfounded right now!

View 2 Replies View Related

Sub-domain Point To A Specific Ip

May 18, 2007

I have a few website's and a whm account.

I also have a few things at home that I would like to access every now and then.

I was wondering if it would be possible to setup a subdomain to point at my ip adress at home?

like if I give the home.domain.com , all traffic would be directed to my home, but domain.com would remain the hosted website?

If it is possible, how do I do it?

View 4 Replies View Related

Port Only Listens To Specific IP

Jan 26, 2007

I would like to limit a port to only listens to requests from a specific IP. How can I do that?

It's a red hat system, with apf installed.

View 5 Replies View Related

How To Delete Specific Files

Oct 10, 2007

In one folder, I have thousand of files, and I want to delete 100 specific files. Saying specific files, I mean all of them has a keyword. So, I can find out all of them by using
grep "keyword" *

but dont know how to delete all of them. Not deleting one by one.

View 2 Replies View Related

Awstats Config

Jun 4, 2009

I have tried to manually setup awstats on a website in Windows 2008 with IIS 7. The problem here is that I have to create two conf files for each website, one named awstats.sitename.conf and the other awstats.www.sitename.conf. If I don't do so, then awstats does not work on either www.sitename.com or sitename.com. I cannot update the stats or view it from the browser. I have a few Hosting controller servers in which awstats is used and I compared the conf file with them and there is no difference. I wonder what could be the issue.

View 1 Replies View Related

Backup Config

Oct 30, 2008

i have a dedicated server without any daily, weekly, monthly backup.
please help me (Step by Step)to setup configuration my server to take backup every day within (some account) at (3 AM).

i mean setting for every day about some account (A,B,C...Z) at the 3 AM

View 6 Replies View Related

How To Config My Domain

Mar 27, 2008

I have a domain, ex: hangnguyen.com at godaddy, I changed nameserver to ns1.everydns.net, ns2.everydns.net, ns3.everydns.net .

Now I order a shared hosting at bluehost, I should change nameserver to ns1.bluehost.com, ns2.bluehost.com to make it works .

But I want keep the nameserver ns1.everydns.net ....

So how I config my domain in everydns control panel to let my domain work on bluehost?

View 3 Replies View Related

BIND9 Config

Jan 20, 2008

Switching from Windows DNS to bind DNS. Slightly different as I have to learn the commands instead of using the GUI. Can you tell me if the below config is correct to run mydomain.net so people can access it from the web? It will also be acting as its own name servers. This is purely for external DNS. The private IPs will be changed to routable ones once its in the DC.

Have I missed anything or is that good enough for deployment to the live environment?

I have this in /etc/bind/zones/mydomain.net.db

; mydomain.net
$TTL 604800
@ IN SOA ns0.mydomain.net. admin.mydomain.net. (
2008012001 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800); Negative Cache TTL

; nameservers
mydomain.net IN NS ns0.mydomain.net
mydomain.net IN NS ns1.mydomain.net
ns0 IN A 192.168.1.15
ns1 IN A 192.168.1.16

;mail
mail IN MX 10 mail
mail IN A 192.168.1.17

; web
IN A 192.168.1.17
www IN A 192.168.1.17

And in /etc/bind I have this in my named.conf.local file

# This is the zone definition for // mydomain.net //
zone "mydomain.net" {
type master;
file "/etc/bind/zones/mydomain.net.db";
};

View 8 Replies View Related

How To Use/config NAMESERVERS

Oct 23, 2008

I have had many dedicated servers in the past but other people managed to configure them up.

I basicly want to host somedomain.com and somedomain2.com on a windows server that is located on XX.XXX.XXX.XX

The server has apache and php installed, which is just what I need. I am having an hard time configuring the domains I want to use on the server in order to make em "work" on the server.

View 4 Replies View Related

MRTG Config

Feb 20, 2007

I've installed MRTG, but am having problems making the config file, all I want to do is monitor the in/out bandwidth (2 graphs) on my own server, has anyone got an example file they could paste here?

View 3 Replies View Related

How To Config PhpMyAdmin

Aug 23, 2007

I am a newbie and now i am running a VPS account. I have some questions want to ask you
Where is the locate of phpMyAdmin?

I am running VPS server but get error when access to phpmyadmin.

Quote:

Wrong username/password. Access denied.

I created a user=root and passworld=xxx in my WHM.

How to find config.inc.php ?
- locate but error

Quote:

warning: locate: could not open database: /var/lib/slocate/slocate.db: No such file or directory

warning: You need to run the 'updatedb' command (as root) to create the database.

Please have a look at /etc/updatedb.conf to enable the daily cron job.

View 4 Replies View Related

Config For MYSQL3.23

Jan 11, 2007

Does someone know a basic or well config for mysql 3.23. I dont need something fancy just something that isn't what i have now (defaults).

Here is my current config. It sucks right? I have mainly forum websites and its alreaydu eating all RAM.

safe-show-database
innodb_data_file_path=ibdata1:10M:autoextend
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
set-variable=max_connections=300
set-variable=max_user_connections=10
set-variable=max_allowed_packet=1M
set-variable=thread_stack=128K
set-variable=key_buffer=128M
set-variable=table_cache=300
set-variable=record_buffer=8M
set-variable=back_log=100
set-variable=thread_cache_size=4
set-variable=sort_buffer=16M
set-variable=delayed_insert_timeout=150
set-variable=interactive_timeout=40
set-variable=wait_timeout=40
set-variable=connect_timeout=10

[mysql.server]
user=mysql
basedir=/var/lib

[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid

View 7 Replies View Related

Redundant Config

Mar 18, 2007

I've decided to move from managed hosting to colocated hosting and I'm in a bit over my head as far designing the server configuration goes. I'm looking for assistance with setting up a fully redundant configuration with no SPOF (single point of failure).

The colo provider ensures full redundancy to the cabinet, terminating with two network drops from diverse bandwidth providers and HSRP. I need to eliminate all SPOFs inside the cabinet.

Some questions...

1) I'm thinking of using the Cisco 2960 Series switch as the in-cabinet distribution switch. I believe it supports HSRP. From my understanding, the switch will automatically failover from one uplink to the other in case of a network problem on one of the uplinks, and this will all be transparent to any servers connected to the switch. Is this correct?

2) However, this introduces the switch as SPOF. So, I believe what I need to do is ask the colo for a second pair of network drops and deploy a pair of 2960's. Then I would connect each server to both switches via separate NICs. Is this correct?

3) Finally, assuming I am on the right track here, I would like this to all be transparent and automatic with no human intervention required to recover from a switch failure. The servers will be running RHEL 4. How would I configure the network interfaces on the servers so that they can transparently use either (or both) of the switches? Is there some way to assign the same IP address to more than one interface? How does the OS keep from getting confused about where to send the traffic?

Thanks in advance for any insight. I would also be happy to hear recommendations for excellent network consultants that I could hire to design and implement this configuration for me.

View 14 Replies View Related

Config PhpMyAdmin

Aug 23, 2007

I have a problem when i config config.inc.php file in my WHM . I don't know why share accounts can access to phpMyAdmin or create your database from cpanel .

This is a part of config.inc.php file

Quote:

/**
* Disable the default warning that is displayed on the DB Details Structure page if
* any of the required Tables for the relationfeatures could not be found
*/
$cfg['PmaNoRelation_DisableWarning'] = FALSE;

/**
* The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
* at least one server configuration uses 'cookie' auth_type, enter here a
* passphrase that will be used by blowfish. The maximum length seems to be 46
* characters.
*/
$cfg['blowfish_secret'] = '';

/**
* Server(s) configuration
*/
$i = 0;
// The $cfg['Servers'] array starts with $cfg['Servers'][1]. Do not use
// $cfg['Servers'][0]. You can disable a server config entry by setting host
// to ''. If you want more than one server, just copy following section
// (including $i incrementation) serveral times. There is no need to define
// full server array, just define values you need to change.
$i++;
$cfg['Servers'][$i]['host'] = 'localhost'; // MySQL hostname or IP address
$cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port
$cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket
$cfg['Servers'][$i]['ssl'] = false; // Use SSL for connecting to MySQL server?
$cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket')
$cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli')
$cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection
// (requires PHP >= 4.3.0)
$cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings
// (this user must have read-only
$cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user"
// and "mysql/db" tables).
// The controluser is also
// used for all relational
// features (pmadb)
$cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (valid choices: config, http, HTTP, signon or cookie)
$cfg['Servers'][$i]['user'] = ''; // MySQL user
$cfg['Servers'][$i]['password'] = ''; // MySQL password (only needed
// with 'config' auth_type)
$cfg['Servers'][$i]['SignonSession'] = ''; // Session to use for 'signon' auth method
$cfg['Servers'][$i]['SignonURL'] = ''; // URL where to redirect user to login for 'signon' auth method
$cfg['Servers'][$i]['LogoutURL'] = ''; // URL where to redirect user after logout
$cfg['Servers'][$i]['nopassword'] = FALSE; // Whether to try to connect without password
$cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only
// this db is displayed in left frame
// It may also be an array of db-names, where sorting order is relevant.
$cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings
$cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname

$cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features
// (see scripts/create_tables.sql)
// - leave blank for no support
// DEFAULT: 'phpmyadmin'
$cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table
// - leave blank for no bookmark support
// DEFAULT: 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc)
// - leave blank for no relation-links support
// DEFAULT: 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields
// - leave blank for no display fields support
// DEFAULT: 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema
// - leave blank for no PDF schema support
// DEFAULT: 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf
// - leave blank if you don't want to use this
// DEFAULT: 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // table to store column information
// - leave blank for no column comments/mime types
// DEFAULT: 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // table to store SQL history
// - leave blank for no SQL query history
// DEFAULT: 'pma_history'
$cfg['Servers'][$i]['designer_coords'] = ''; // table to store the coordinates for Designer
// - leave blank for no Designer feature
// DEFAULT: 'pma_designer_coords'
$cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables
// are up to date. This prevents compatibility
// checks and thereby increases performance.
$cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login
$cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use
= '';
$cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults
= array();

// If you have more than one server configured, you can set $cfg['ServerDefault']
// to any one of them to autoconnect to that server when phpMyAdmin is started,
// or set it to 0 to be given a list of servers without logging in
// If you have only one server configured, $cfg['ServerDefault'] *MUST* be
// set to that server.
$cfg['ServerDefault'] = 1; // Default server (0 = no default server)

/**
* Other core phpMyAdmin settings
*/
$cfg['MaxDbList'] = 100; // maximum number of db's displayed in left frame and databaes list
$cfg['OBGzip'] = 'auto'; // use GZIP output buffering if possible (TRUE|FALSE|'auto')
$cfg['PersistentConnections'] = FALSE; // use persistent connections to MySQL database
$cfg['ForceSSL'] = FALSE; // whether to force using https
$cfg['ExecTimeLimit'] = 300; // maximum execution time in seconds (0 for no limit)
$cfg['MemoryLimit'] = 0; // maximum allocated bytes (0 for no limit)
$cfg['SkipLockedTables'] = FALSE; // mark used tables, make possible to show
// locked tables (since MySQL 3.23.30)
$cfg['ShowSQL'] = TRUE; // show SQL queries as run
$cfg['AllowUserDropDatabase'] = FALSE; // show a 'Drop database' link to normal users
$cfg['Confirm'] = TRUE; // confirm 'DROP TABLE' & 'DROP DATABASE'
$cfg['LoginCookieRecall'] = TRUE; // recall previous login in cookie auth. mode or not
$cfg['LoginCookieValidity'] = 1800; // validity of cookie login (in seconds)
$cfg['LoginCookieStore'] = 0; // how long login cookie should be stored (in seconds)
$cfg['LoginCookieDeleteAll'] = TRUE; // whether to delete all login cookies on logout
$cfg['UseDbSearch'] = TRUE; // whether to enable the "database search" feature
// or not
$cfg['IgnoreMultiSubmitErrors'] = FALSE; // if set to true, PMA continues computing multiple-statement queries
// even if one of the queries failed
$cfg['VerboseMultiSubmit'] = TRUE; // if set to true, PMA will show the affected rows of EACH statement on
// multiple-statement queries. See the libraries/import.php file for
// hardcoded defaults on how many queries a statement may contain!
$cfg['AllowArbitraryServer'] = FALSE; // allow login to any user entered server in cookie based auth

// Left frame setup
$cfg['LeftFrameLight'] = TRUE; // use a select-based menu and display only the
// current tables in the left frame.
$cfg['LeftFrameDBTree'] = TRUE; // turn the select-based light menu into a tree
$cfg['LeftFrameDBSeparator'] = '_'; // the separator to sub-tree the select-based light menu tree
$cfg['LeftFrameTableSeparator']= '__'; // Which string will be used to generate table prefixes
// to split/nest tables into multiple categories
$cfg['LeftFrameTableLevel'] = '1'; // How many sublevels should be displayed when splitting
// up tables by the above Separator
$cfg['ShowTooltip'] = TRUE; // display table comment as tooltip in left frame
$cfg['ShowTooltipAliasDB'] = FALSE; // if ShowToolTip is enabled, this defines that table/db comments
$cfg['ShowTooltipAliasTB'] = FALSE; // are shown (in the left menu and db_structure) instead of
// table/db names. Setting ShowTooltipAliasTB to 'nested' will only
// use the Aliases for nested descriptors, not the table itself.

$cfg['LeftDisplayLogo'] = TRUE; // display logo at top of left frame
$cfg['LeftLogoLink'] = 'main.php'; // where should logo link point to
// (can also contain an external URL)
$cfg['LeftLogoLinkWindow'] = 'main'; // whether to open the linked page
// in the main window ('main')
// or in a new window ('new')
$cfg['LeftDisplayServers'] = FALSE; // display server choice at top of left frame
$cfg['DisplayServersList'] = FALSE; // server choice as links
$cfg['DisplayDatabasesList'] = FALSE; // database choice in light as links

// In the main frame, at startup...
$cfg['ShowStats'] = TRUE; // allow to display statistics and space usage in
// the pages about database details and table
// properties
$cfg['ShowPhpInfo'] = FALSE; // show php info link
$cfg['ShowServerInfo'] = TRUE; // show MySQL server information
$cfg['ShowChgPassword'] = FALSE; // show change password link
$cfg['ShowCreateDb'] = TRUE; // show create database form
$cfg['SuggestDBName'] = TRUE; // suggest a new DB name if possible (false = keep empty)

Some questions
--------------------------------------------------
$cfg['Servers'][$i]['controluser'] =?

$cfg['Servers'][$i]['controlpass'] =?

--------------------------------------------------

$cfg['Servers'][$i]['user'] =?
$cfg['Servers'][$i]['password'] =?

View 2 Replies View Related

Postfix Config

Jan 25, 2007

I'm having some SMTP server security issues. I am running Postfix on my Debian VPS and I am trying to disable Postfix from being publically used by anybody except those with webmail.

I read Postfix's configuration at Postfix.org, but I couldn't find anything that I thought to be relevent to this situation. Do any of you have suggestions or ways to fix this? Besides disabling e-mail all together?

As another detail, I'm running Postfix on its original config, not through a MySQL database config.

View 1 Replies View Related

New Apache Config

Oct 6, 2007

ive just upgraded to Apache 2.2.6 today and ive found a problem. Im trying a new way of doing mass virtual hosting using mod macro.

<Macro vhost $domain $path>
<VirtualHost *>
VirtualDocumentRoot "$path/Web/"
ServerName $domain.spkweb.com
ErrorDocument 404 "drive:/folder/404.php"
php_admin_value open_basedir "$path/Web/;$path/Temp/"
php_admin_value upload_tmp_dir "$path/Temp/"
<Directory "$path/Web/">
Options FollowSymLinks
AllowOverride all
Allow from all
</Directory>
</VirtualHost>
</Macro>

Use vhost DJSmithy "drive:/Hosting/DJSmithy"

Mostly it works fine but if there is a 404 then i get a 403 permission denied error instead of the error page. the folder that contains the error page does have a <directory> bit for it and i even tried adding it into the virtual host but i get the same result.

if the file does exist then it loads like normal

can anyone see any problems with my config or do i have to do something diff for 2.2.6?

View 2 Replies View Related

Config For New Server

May 26, 2007

Got a new box, Xeon 3060, 2GB memory, 2x250 SATA II drives. I have 1 mysql/php forum with about 60-70 users online and 1 multimedia download site.

the minimum configuration for Apache httpd.conf ? I just need a starting point to optimize.

View 6 Replies View Related

Apache 2 Config

Nov 9, 2007

I had to switch to Apache 2 from Lighttpd and I'm running into a little bit of trouble trying to make it handle all my traffic. I'm using the worker MPM module, which has the following default config:

Code:
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

I need Apache to be able to handle about 200-500 requests per second. I tried increasing ServerLimit and MaxClients but that didn't work very well.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved