My configuration is correct because I have been using the same one on multiple servers.
I have run into this on another server actually, where the init script says it starts, but it in fact has not started. Stopping it results in a fail, and its nowhere to be found in the process list, but the PID file exists. I turned it to verbose and had it output to a log file, and the only thing I see is NET-SNMP version 5.1.2.
I'm having issues after changing my system time and rebooting for whatever reason it didn't take effect but now my VMWare servers wont boot. I get this error when trying to run a vmware-cmd
[root@plexus ~]# /usr/bin/vmware-cmd -l
/usr/bin/vmware-cmd: Could not connect to vmware-authd
(VMControl error -14: Unexpected response from vmware-authd: 511 Error connecting to /usr/sbin/vmware-serverd process.)
[root@plexus ~]#
also when i try logging into the web interface same error.
I've got a small box running as a fileserver with CentOS 5. Sometimes life is a little easier using a GUI for jobs rather than SSH.
As this is not accessible externally, I've got it to autologin to a non-privilaged user, and as part of that logon a VNC session is opened using the inbuilt remote desktop tool.
This was working perfectly, until I realised if I cold boot the server without a monitor attached, X11 wont start at all unless I attach a monitor to it.
I know I can start a VNC session from using vncserver, but this way allows me to logon to the server as if I was sat infront of it, rather than running an extra session.
Presumabley I can add something into /etc/X11/xorg.conf so X11 will start without a monitor hooked up?
[root@server1 ~]# service httpd start
no listening sockets available, shutting down
Unable to open logs
CENTOS Enterprise 4.6 i686 on standard - WHM X v3.1.0
apache 2.2
httpd.conf file was empty... I'm recompiling right now.
I am using several different VPS templates for trying to setup SNMP to monitor statistics but for some reason I cannot get the SNMPd to work remotely on either the Debian 3.1 x86_64 or Debian 4.0 i386.
When I try to snmpwalk locally it works just fine (using 127.0.0.1)...
com2sec public 127.0.0.1 public
group public v1 public
group public v2c public
group public usm public
view all included .1
access public "" any noauth exact all none none
But when I try to setup any remote IP to it, it doesn't go through...
com2sec public 10.250.0.1 public
group public v1 public
group public v2c public
group public usm public
view all included .1
access public "" any noauth exact all none none
I have the same setup on CentOS and SuSE and they work fine with my remote server but I cannot seem to get the Debian to work. I am not a wiz with Debian I will admit, but I have tried everything I can think of including flushing iptables and setting it up on more than one IP.
Please if anyone can suggest anything to help, maybe someone has been successful in setting up the SNMPd for remote access to an IP?
i am having an issue with my vps recently my ftp is down and i cant restart my ftp not sure how i can get this fix.
View 8 Replies View Relatedwhen I try to go to a site of mine with the www like this one [url] It won't work but if I take out the www like this[url]it does work.
I'm not sure what could be causing this. As far as I'm aware everything is setup okay. I understand it's impossible for anyone who reads this to properly diagnose the issue without access to my server.
I've got the latest grsec stable, but i'm having a problem with getting ip_conntrack working.
I did the following with make menuconfig after copying my default kernels config file...
Networking -> Networking support -> Networking options -> Network packet filtering
framework (Netfilter) -> Core Netfilter -> Configuration -> Netfilter Xtables support
(required for ip_tables) -> "conntrack" connection tracking match support.
After a compile and reboot:
error: "net.ipv4.netfilter.ip_conntrack_generic_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_icmp_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_close" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_time_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_last_ack" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_close_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_fin_wait" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_established" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_syn_recv" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_tcp_timeout_syn_sent" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_udp_timeout" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_udp_timeout_stream" is an unknown key
error: "net.ipv4.netfilter.ip_conntrack_max" is an unknown key
error: "net.ipv4.ip_conntrack_max" is an unknown key
I did a ls on /lib/modules/2.6.27.10-grsec/kernel/net/ipv4/netfilter and dont see the modules that i see in the default kernels...
I keep trying to restart Apache but it wont restart... I run a command line to restart it, but nothing happens. Here is what I have tried:
Quote:
-bash-3.1# chroot /home/fatehost.net/runtime_layeredpanel/
fatehost:/# /etc/
bash: /etc/: is a directory
fatehost:/# /etc/init.d
bash: /etc/init.d: is a directory
fatehost:/# /etc/init.d/httpd-users
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 5955) already running
.
fatehost:/# /etc/init.d/httpd-users force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd force-reload
Forcing reload of web server: Apache2.
fatehost:/# /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 13475) already running
.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/# /etc/init.d/httpd-users stop
Stopping web server: Apache2.
fatehost:/#
fatehost:/# /etc/init.d/httpd-users start
Starting web server: Apache2(98)Address already in use: make_sock: could not bind to address 205.209.135.132:80
no listening sockets available, shutting down
Unable to open logs
fatehost:/#
fatehost:/# sudo /etc/init.d/httpd-users stop
bash: sudo: command not found
fatehost:/# su root /etc/init.d/httpd-users restart
Forcing reload of web server: Apache2httpd (pid 20391) already running
.
fatehost:/# /etc/init.d/httpd-users reboot
Usage: /etc/init.d/apache2 start|stop|restart|reload|force-reload
fatehost:/# reboot
WARNING: could not determine runlevel - doing soft reboot
(it's better to use shutdown instead of reboot from the command line)
shutdown: timeout opening/writing control channel /dev/initctl
init: timeout opening/writing control channel /dev/initctl
fatehost:/# WARNING: could not determine runlevel - doing soft reboot
bash: WARNING:: command not found
fatehost:/# (it's better to use shutdown instead of reboot from the command line)
> shutdown: timeout opening/writing control channel /dev/initctl
> init: timeout opening/writing control channel /dev/initctl
>
fatehost:/# /home/fatehost.net/runtime_layeredpanel
bash: /home/fatehost.net/runtime_layeredpanel: No such file or directory
fatehost:/#
I have complied exim 4.66 version using the source, now i do not seem to make it work
i am getting the fallowing error when i try send mail
$ exim xxx@xxxx.xxx
test
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Cannot open main log file "/var/log/exim/mainlog": Permission denied: euid=8 egid=12
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Failed to create spool file /var/spool/exim/input//1HOeWd-0000SH-EZ-D: Permission denied
2007-03-06 12:36:44 1HOeWd-0000SH-EZ Cannot open main log file "/var/log/exim/mainlog": Permission denied: euid=8 egid=12
exim: could not open panic log - aborting: see message(s) above
when i do $ service exim restart the service fail to stop and but starts OK.
there is no control panel installed on the box.
I'm running Plesk 8.4.0 and for whatever reason apparently IonCube didn't come pre installed or wasn't working so I tried installing it which is just getting the .so files and adding it to the php.ini that didn't work so I tried Zend the installer said it was complete but again no go. So I have this for an error
[root@liquidwind ~]# php -v
Failed loading /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: undefined symbol: zend_unmangle_property_name_ex
Failed loading /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: /usr/lib/php/modules/php_ioncube_loader_lin_5.1.so: undefined symbol: zend_unmangle_property_name_ex
Failed loading /usr/local/Zend/lib/Optimizer-3.3.3/php-5.2.x/ZendOptimizer.so: /usr/local/Zend/lib/Optimizer-3.3.3/php-5.2.x/ZendOptimizer.so: cannot restore segment prot after reloc: Permission denied
PHP 5.2.5 (cli) (built: Jan 19 2008 10:30:38)
Copyright (c) 1997-2007 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies
with Zend Extension Manager v1.2.2, Copyright (c) 2003-2007, by Zend Technologies
[root@liquidwind ~]#
to implement a chat but I need that it wont overwhelm the server if is easy to set up it would be even better!
I am trying phpfreechat which uses ajax files as container, is that method better than using mysql as a acontainer?
I have this problem today after a fresh install...
I think its maybe i havent dont it proper im not sure..
But a client joined today and i have new account created auto after payment and well it says in the whmcs the user has an login and password but when i tried to login with it it said login failed
Also it trys to login to whm not cpanel with the account, even tho its set up as shared hosting in products...
the login link is : [url]( i removed name for security)
So this is a new problem for me, and I have no idea what could be broken?
My server works, but none of the sites load.
Server ip is 69.162.121.170, one of the sites is bloghost.cl
Where should I start looking? When you try to visit the site it just tells you it cant establish a connection. All I did was restart the server today, and now nothing works
We know the problem with geekstorage that their vps nodes are oversold.
i asked for a refund for the months i havent use yet, and they wont refund me, they just say that i will get credit, but i think it is not fair he can not hold my money for a service that has not been provided yet, im not asking for a full refund, just for the months i prepaid
i have 268 dollars in favor, i offer a deal to jay to just refund me 218 dollars instead of 268, and now he is not responding my tickets i have been waiting more than 24 hours to get a response
One of my customers has been having a problem with his index files not showing up. It'll display the parent directory, and you can clearly see the index.html file in there, but it won't show it as the index.
It happened in one directory, and I went into .htaccess and did DirectoryIndex index.php.... but now i'm wondering if its part of a bigger problem, because its happening to other folders now.
I built a web hosting server, the following is its state
Cent os 5
AMP server loaded updated (installed it as a complete suite during installation so it was all set to go with php mysql modules loaded)
webmin
usermin virtualmin
created 2 named based hosts.
now when i load up wordpress in a site and try to run install.php
the following pops up
"Sorry, I can't write to the directory. You'll have to either change the permissions on your WordPress directory or create your wp-config.php manually."
I had this issue before and research said to redo the entire server (tried everything and was fed up had fedora then"
you can have a look at www.itgrunts.com just click create config file and the errror pops up.
The php and mysql db work great on simple scripts but i dont know why this happens.
i worked with assigning the users and apache user to the directory and everything, no joy.
An automatic backup in plesk has filled up the disk space in my VPS. It seemed to crash first of all - couldn't access my website, then i tried to restart it. It wont restart and comes up with the error below.
As i can't get into plesk i don't know how to delete these old backup files, seem to be in a catch 22. Help
Jul 17, 2008 01:05:33 PM Start Process Completed
Jul 17, 2008 01:05:33 PM Click here to open/close operation details.Start VPS #48606643 Failed
Jul 17, 2008 01:05:33 PM Operation start with the VPS(s) VEID48606643 is started.
Jul 17, 2008 01:05:33 PM Starting VE ...
Jul 17, 2008 01:05:33 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:33 PM VE is mounted
Jul 17, 2008 01:05:33 PM Setting devperms 20002 dev 0x7f00
Jul 17, 2008 01:05:33 PM Setting devperms 20007 dev 0xac8
Jul 17, 2008 01:05:33 PM Adding port redirection to VE(1): 4643 8443
Jul 17, 2008 01:05:33 PM Adding IP address(es): 212.227.251.151
Jul 17, 2008 01:05:34 PM ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0
Jul 17, 2008 01:05:34 PM bash: line 264: echo: write error: Disk quota exceeded
Jul 17, 2008 01:05:35 PM vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244]
Jul 17, 2008 01:05:35 PM VE is unmounted
Jul 17, 2008 01:05:35 PM VE start failed
Jul 17, 2008 01:05:35 PM Operation start with the VPS(s) VEID48606643 is finished with errors: #1004 Error invoking vzctl utility: Starting VE ... vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is mounted Setting devperms 20002 dev 0x7f00 Setting devperms 20007 dev 0xac8 Adding port redirection to VE(1): 4643 8443 Adding IP address(es): 212.227.251.151 ERROR: Can't write to file /etc/sysconfig/network-scripts/ifcfg-venet0 bash: line 264: echo: write error: Disk quota exceeded vzquota : (warning) block_soft_limit [10000100] < block_current_usage [10099244] VE is unmounted VE start failed . Failed
Jul 17, 2008 01:05:35 PM Complete Process Failed
Recently left a big corporate job and started my own consulting firm in the area of human resources/employee benefits. Right now, my technology consists of a laptop with online backup through Carbonite. I am ILLITERATE when it comes to technology, so bear with me please....
BackgroundThe business plan calls for growth by adding a small number of employees, starting with an assistant, along with working with independent contractors. These will each need to have access to the files that now reside on my hard drive. I don't anticipate more than 6 people (employees and/or contractors, combined) in the first year.
In addition to the shared access described above, I would need to be sure that the environment where files are stored is highly secure, and that I can grant access to files to some people and not others.
In addition to the above, I need to ensure that all the data are backed up routinely.
Employees/contractors will likely not be in the same office location where I am located, and some (most) may work from a home office.
My assistant, when hired, may/may not be in my office. Regardless, (s)he will need to have access to (and make changes to) my contacts and calendar in outlook. In addition, (s)he will need to be able to read and send emails on my behalf.
AT&T, as part of my advertising with them in the Yellow Pages, is developing (and will host) my website. Included in their service will be email boxes (up to 20) with my domain name.
Business Need
Based on these points, I figured I needed to buy a server, so I've been talking with Dell. Of course, they'll sell me a server and they have a relationship with All Covered who will install it and make sure its operational.
But after talking wtih Dell, I learned that there was something called managed hosting, colocated hosting, dedicated hosting, and shared hosting. I called Rackspace, they said they would be overkill for what I needed and referred me to Mosso. Mosso said the same thing, and sent me to this site.
i install APF and config conf file but i have a problem for start APF :
root@server [~]# /usr/local/sbin/apf -r
eth0 : error fetching interface information Device not found
eth0 : error fetching interface information Device not found
eth0 : error fetching interface information Device not found
eth0 : error fetching interface information Device not found
eth0 : error fetching interface information Device not found
Development mode enabled !; firewall will fluch every 5 minutes.
Unable to load iptable module (ip_tables), abroting
i check APF status : apf -t
Firewall offline
i install apf and config conf file
for Start APF?
about Xen to build some VPS for internal usage. Where should I start? www.xen.org?
View 14 Replies View RelatedWhile i have loads a experience running servers remotely, I know to start my own ISP is a bit more costly and involves things like rack servers, temperature controled rooms and BANDWIDTH.
I have handle on 1st two, ( and yes htings like insurance and a store are looked after )
What i need are a list of T3 providers that I can contact about purchasing a dedicated T3 line for our store. While the location isn't yet set in stone and i may in fact look at a existing computer store owner who may be open to the idea already.
The company will host local websites, and others websites.
AND allow for reselling on a lessor level and include at least 6 others who host game servers.
With these 6 the T3 line will probably be almost half used, so the ISP must be scalable for growth.
The thing i need in nut shell are pricing on a T3 line of my own in or close to downtown Oshawa Ontario, Canada
How can link to my mysql , if I make tables?
View 2 Replies View RelatedI am unable to start apf firewall in openvz vps, i have following error:
root@server [~/apf-0.9.6-3]# /usr/local/sbin/apf -s
apf(9352): {glob} activating firewall
apf(9405): {glob} unable to load iptables module (ip_tables), aborting.
apf(9352): {glob} firewall initalized
apf(9352): {glob} fast load snapshot saved
How can resolve this issu?
we have a vps server and someone did what I would call a calling card attack, thankfully.
It is a stock kubuntu os with stock apache. Root passwords for everything have been changed to our own
Somehow they logged into kubuntu as root and changed the htpasswd in usr/passwords (changed to protect the password).
Then since they changed the htpasswd they were able to log into phpmyadmin and changed the admin password in the database.
I'm pretty sure I know who did it and he is teaching us a lesson which I respect but he will not comunicate with us.
We have hourly snapshots of our vps and we need to know how they are getting in. See my sig and click on the hotspot login.
Looking at the sudoers there is the Defaults line that we suspect as a means to get in.
We have a great php etc... app but it is either Apache or kubuntu that they can get in.
I would like to learn about what needs to be done about security but where do I start?
Can someone help me look for something that would allow the attack?
I'm a php guy and it is not a mysql injection attack nor is it an xss attack.
I am not a kubuntu / server security guy and now need your advice.
root@xxxx[~]# service iptables status
Firewall is stopped.
root@xxxx[~]# service iptables start
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: filter [ OK ]
Unloading iptables modules: [ OK ]
root@xxxx[~]# service iptables status
Firewall is stopped.
why not iptables don't start ?
i create a template for xen ( hypervm ) from jailtime site. now i install iptables , but iptables do not work and when i enter " service iptables restart" , iptables do not start. ( i check it from "service iptables status" )
View 4 Replies View RelatedSo basicly I got a vps and am using lxadmin *renamed* and with ssh and lxadmin the lighthttpd wont start and it is installed under the centos hostinabox distro.
View 3 Replies View RelatedBy mistake I have kill ssh. And I can not connect to my server. I've plesk cp. How cna I restart ssh daemon.
View 8 Replies View RelatedI'll buy a unmanaged VPS. Which softwares must I install? For security, which software do you recomend me?
View 12 Replies View Relatedtdot:/# /etc/init.d/mysql start
Starting MySQL database server: mysqld.
.
.
.
.
...failed or took more than 6s.
Please take a look at the syslog.
/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!
tdot:/#
