I know of ovh (ick), leaseweb/rackedge and thats about it (maybee ecatel I emailed)
is there any others I should know about (not unmetered can't aford 4-5K euro lol)
looking for lower spec proc with 2 drives and 4-6TB on gigabit
I've got a dedicated with Centos 4.x, WHM / Cpanel. I have problem when create new account, this is error:
Setting up Mail & Local Domains...localdomains...valiases ...vdomainaliases...vfilters......Done
Configuring DNS...Bind reconfiguring on server using rndc
Error reconfiguring bind on server: rndc: error: /etc/rndc.key:7: 'options' redefined near 'options'
rndc: could not load rndc configuration
Does anyone know of some remote reboot PDU's that feature a digital current read out on it that tells you how many AMPs is being used?
I am aware that the AP7900 has one; does anyone know of any others?
if any of you know of a gigabit url, to where I can use wget to test the speed of my gigabit uplink?
View 14 Replies View Relatedsome gigabit NICs for server upgrading. Will use with CentOS (mixed of 32, 64 bits, centOS 4-5) on PCI slot. Which brand do you suggest? I don't want to face to compatibility issue
View 7 Replies View Relatedwhat is Metered and unMetered ?
View 4 Replies View RelatedSomeone mentioned corenetworks.net in one of the posts, so I went to look at them, then checking out the options, it got me thinking about this, what is the difference/what does it mean?
Unmetered Bandwidth Options vs. Metered Bandwidth Options?
Unmetered 3Mbps/month +$0.00
Metered 1,000GB/month +$0.00
So, are they saying that I can get 3Mbps 24/7 for an entire month for no extra, or 1,000GB total transer at? Mbps (I would assume 10Mbps or 100Mbps depending on the setting.)?
Ok, so I am trying to answer my own question...
Let me just ask it. What's the difference?
They have an Unmetered @ 10Mbps for $350.00/month, but come on... Is it "really" unmetered? (Just like those shared "unlimited transfer" type accounts, where they hack you off at the knees when you go past their invisible "unlimited" number.
What is the diference between metered and unmetered bandwidth. I was looking a one provider that I will not name and they have 1Mbps metered for $109 and then they offer 10Mbps unmetered for $139. To me unmetered sounds like a better deal. Is there something that I am not knowing or seeing between the two?
View 3 Replies View RelatedMost likely we'll end up with a single 1000mbit drop, and ~30 machines.
Although Netgear isn't my personal preference, how would a Netgear Prosafe GS748T do?
We are on a budget however I want something which is going to be bulletproof and not cause us any issues.
I purchased a gigabit server and I wanted to somehow test if I was really on a dedicated gigabit line.
A friend of mine said he did some bandwidth tests and the max speed he got was 9.8 MB/s
With a gigabit connection.. shouldn't the speeds go far higher than that?
Whats the best way to make sure so I know I was tricked?
The server is running Win 2003 server
speedtest capable of atleast 1gbit (my server is faster than this supposedly) in NL
(prefer not to use my hosts test file)
can be a test or a test file...
doesn't require flash, I can't seem to get it working on iceweasle
why Uberbandwidth doesn't do metered traffic/bandwidth sales? I've inquired and they only will do 95th percentile packages but will not do for example an 100mbit port with 2,000GB traffic. Curious to get responses on what people believe is the reason they don't provide metered traffic services/packages.
View 10 Replies View RelatedI'm about to start a web site that doesn't consume much bandwidth and CPU and I don't know which dedi is better to use from exmasters.com.
View 0 Replies View RelatedThis is more aimed at providers but do you allow partial upgrades on RAM/Disk/Bandwidth?
I'm asking as we have one brand which is fully automated which I refuse to do partial upgrades on as its done as a budget and if a user needs more they need to upgrade to the next package but it is budget.
On our more expensive brands we do allow partial upgrades
I have a Windows VPS hosting account. Plesk control panel. I use PHP for my website. With this setup how can I Rewrite my url's from
www.domain.com/page.html?x=param1&y=param2
to
www.domain.com/page/param1/param2
When I try to search I only find URL rewrite for Linux based vps using php or windows based vps using dotnet or php
Am having a lot of this in my apache status in both, a dedicated server and a vps, i think is affecting our load,
example of just some of the ones that appear in the apache status (whm)
Code:
70-0 - 0/0/21 . 0.00 18726 0 0.0 0.00 0.17 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
71-0 - 0/0/33 . 0.00 18730 0 0.0 0.00 0.20 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
72-0 - 0/0/93 . 0.00 18731 0 0.0 0.00 0.83 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
73-0 - 0/0/17 . 0.00 18734 0 0.0 0.00 0.07 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
74-0 - 0/0/24 . 0.00 123794 0 0.0 0.00 0.13 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
75-0 - 0/0/30 . 0.08 123710 0 0.0 0.00 0.07 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
76-0 - 0/0/9 . 0.00 123783 0 0.0 0.00 0.03 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
77-0 - 0/0/10 . 0.01 123709 0 0.0 0.00 0.01 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
78-0 - 0/0/19 . 0.00 123748 232 0.0 0.00 0.17 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
79-0 - 0/0/129 . 0.00 123793 0 0.0 0.00 1.77 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
80-0 - 0/0/1 . 0.00 177694 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
81-0 - 0/0/1 . 0.00 177693 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
82-0 - 0/0/1 . 0.00 177692 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
83-0 - 0/0/3 . 0.07 177638 0 0.0 0.00 0.02 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
84-0 - 0/0/13 . 0.16 177609 0 0.0 0.00 0.03 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
85-0 - 0/0/1 . 0.00 177691 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
86-0 - 0/0/12 . 0.08 177616 0 0.0 0.00 0.01 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
87-0 - 0/0/3 . 0.00 177647 0 0.0 0.00 0.00 127.0.0.1 server.domain.com OPTIONS * HTTP/1.0
I backup my accounts via cpanel backup. I run incremental and mount to a NAS. I have about 2GB in database and 3GB in files (500,000+ PNGs). Backup is hard on the server and it takes 17 hours to complete according to my logs.
View 5 Replies View RelatedAs a web hosts backups of client data are very important for me so I want some advices on the best methods of backups.
Should I use :
1. Raid
2. 2nd HDD and use cPanel's built in backup system.
3. Separate backup's server using cPanel's built in backup system.
4. r1soft or other commercial softwares?
I host several web clients that were recently impacted by the crap at ThePlanet. As I think about how to be more redundant (and repetitive) I'm not sure of my options.
What's the best practice to ensure that if you have a server at a data center that goes out, that you can (somewhat) easily switch over to a different server? I suppose one solution is to have 2 servers at 2 physical locations, and then you could just change the DNS record in the event of failure, but is there another solution I'm not aware of? Is there a good resource I can goto to read up on this info?
Still considering co-location and have been for many months! One thing I'm now thinking of is firewalls. What firewalls are available to me, what functionality do they have? What kind of additional protection can they give against DDoS attacks?
I really have no idea where to go with hardware firewalls. The bandwidth going through the firewall on average would be no more than 10mbit/s. Perhaps 20 with growth!
how you went about setting up your colo space with firewall protection
I'm reseller vps, and now i decided to run own node, and sell vps, i choosed VDSMANAGER control panel, because virtuzzo is expensive.
Please help me to choose best options to run best and quality node,
VDSManager or VEportal ? (good optios&security&support&...)
XEN or OPENVZ ? (uutil now OPENVZ best for run static and dynamic site, but on xen can be run vpn & shoutcast & windows & linux & ...)
RAM GB ?
CPU ?
Hard ?
can i use load balancing for vps node ?
how many vps can be run on this node ?
Ex:
VDSmanager
XEN
Core2Quad Q9300
8 GB RAM
500 GB HDD
I am selling custom software and web-design solutions. After my "unforgetable" experience with PayPal and 2CO i have found URL - they are new on the market and this is why they are more responsive than PayPal, whose priority is quantity, not quality. Most probably there are other option as well - simply this one is the most acceptable for me as it does not require complicated registration process/documents. I don't know how to get a normal merchant account if you live where I live.(I am from Ukraine). Please advice me some merchant accounts with their full discription.
View 4 Replies View RelatedCurrently I cache php to html in a folder, and any time I upload index.php the whole site recaches. It also is set to a specific time such as 1 day, and the specific page will recache on someone hitting a page in 1 day from last cache.
The problem is when there are thousands of people on, and the index.php is uploaded the site crashes due to connections to the database, and possibly writing to the folder as well.
What is the best way to cache these files to html, and not have it crash every time I try to update things on the site. Also it needs to be something somewhat simple.
My host has told me that my forum is coming under a DDOS attack. Once was on Friday March 20th and again today (monday march 23). Before those two, there are attacks almost every week, sometimes twice a week.
The host installed DoS-Deflate. It started blocking legitimate traffic and had to be removed.
The operating system is Linux CentOS, the forum software is VBulletin. The server is a VPS with 1 gig of memory.
Besides DoS-Deflate, what other options are out there?
Just curious if any of you know of good ways to handle the bandwidth costs associated with hosting high traffic video sites.
For a future project I plan a dedicated server, but was hoping there might be a cheap way to avoid bandwidth costs - such as Amazon S3 (however from my calculations this is an expensive option).
I want to know what does kill -6 PID does?
Is there anything else like kill -1,-2 (expect 9).
Also, what is the diff between kill and kill -9?
I'm currently working for a company who are looking to migrate there current business system and also create an e-commerce website.
The company (Company A) who were doing the migration were also going to originally take care of the e-commerce side of things aswell, but after looking at the website solution they have now decided to give it to another company (Company B) to deal with. But seem to be sticking with the original company to do the business system migration.
Now this has created a bit of a problem with regards to the hosting side of things (amongst other things ).
Originally this was all going to be hosted by Company A. This would keep it all nicely integrated.
But now Company B are doing the e-commerce side of things it needs to somehow integrate with the business database.
And now for the question (about time i hear you ask ).
Can you give me the pros and cons of the following scenarios:
Scenario A:
We host both business system (database) and webservers onsite.
Scenario B:
Company A hosts business (database) solution. We host webserver.
Scenario C:
Company A hosts business (database) system. Company B hosts webserver.
to add an application firewall to an IIS server for PCI compliance reasons.
I know the breach product is one option. From what I can tell, they are the people that maintain mod_security now. Is that right?
Besides the breach appliance, what other options do I have for an application firewall for IIS 6 and IIS 7?
I've recently taken out a new server and the management company I use have indicated that the HDD may be failing.
My server memory usage has been pretty much frozen at 85%+ since it went live, and there is only one live site on the server thats not at all active.
Because of this memory issue the management company discovered the HDD issue whilst probing around.
I contacted the server provider and they have said because its a single unit system that the only option they have is for me to have a new HDD and a simple OS reload.
This poses a problem for me because I've paid my management company to harden and configure the server for me - If my server provider reloads, I'll lose all the work I've paid for.
I find it a little unfair that this has happened with a new (maybe reconditioned server) and that I'm stuck in such a situation, but as is life..
I'm just wondering if anyone could suggest what I might be able to do about this. Is there anyway I could perhaps take a full backup of the entire server and reload it from a seperate server? Is there a service avaliable that offers this sort of thing? I can't get physical access to the server so there is no way of me going there and backing it up myself.
My old/original server that I moved from is still active. I think the current server has like 5-10Gb used so far.
How do I add all the options:
*Business Operations
*Business Monitoring
*Business Setup
As the image link
So far I really haven't found any free hosting options that I would personally use for any of my websites. Are there any "full-featured" free hosting options that a lot of people don't know about?
View 3 Replies View Related