I've currently installed webmin on my vps and i want to know ive followed this tutorial and is there away for me to setup my dns name servers for my domain how can i do that with webmin? .......
View 6 Replieswe have any server with isp, really perfect service and support.
but now we need to buy 1 server with vps solutions and our isp not offer this solutions.
The support have said that we must buy not managed server and install by ourself.
Now we are not sure if better to buy unmanaged and searc expert to install vps OR buy serve with vps solutions from other isp.
What do you think about this?
I would like to create VMM template with installed plesk panel 12.0.18
But after I executed sysprep plesk panel didn't work.
All services, application pool work, but when I try to connect https://localhost:8443 I get an error "The page can't be displayed"...
I'm looking to move from Infrenion.com. The Infrenion VPS has been really great as far as speed and performance. However, Infrenion leaves the number of max diskinodes to 200,000. I've tried fighting with them to get it increased to where it should be (for a 20GB partition), 2 million nodes. I run a social networking site that uses Smarty templates and requires as much nodes as possible.
So, I'm looking for a VPS that has FFMPEG pre-installed, speed, 15 to 20GB of space, and is under $50/month.
Infrenion, if you're reading this, please reconsider your configurations of your servers.
to host flash sites is there anything my server needs installed on it the way you need perl or php installed?
View 2 Replies View RelatedI tried adding an apache service node to PPA Admin Node.
I referred to the specs at [URL] ....
Specifications of the Apache server node are:
RHEL 6.4 64bit
RAM 3GB
CPU 2.5GHz
Free Space 18GB
Ports Opened:
80, 443: HTTP, HTTPS
8352-8999: Communication between a service node and PPA panels
22: Communication through SSH
20, 21: FTP connections
But when I tried adding it as a service node, PPA says The Linux platform installed on the remote host 'xx.xx.xx.xx' is not supported. Please, check the list of supported platforms.
What is virtual host?
View 4 Replies View RelatedWhen you set up a new domain you have to write a new virtual host to httpd.conf... then you have to restart the Apache... Is their a way to do this without the restart. Surely a big ISP doesn't restart Apache every time a new domain is added.
View 9 Replies View Relatedexplain our setup.
We have an in house centOS linux developer box running apache 2.x
We have our own on-site router/switch setup etc.
We host our external website whatever.com with Networksolutions
On our whatever.com DNS (via network solutions). We have our domain subscriber.whatever.com pointing to our external IP address. subscriber.whatever.com -> xx.xx.xx.xx
In our router configuration we have subscriber.whatever.com forwarding to our CentOS linux development box. it's forwarding to the internal network IP address 10.xx.xx.xx
However we want the box to redirect someone when they come in on subscriber.whatever.com... We basically want it to redirect them to subscriber.whatever.com:port/folder/
Preferably masked so that all someone would see is subscriber.whatever.com but they're actually at subscriber.whatever.com:port/folder/
Unfortunately network solutions's setup won't allow us to easily do this so we have to do it somehow locally.
Anyone have any suggestions? I've got this working on the box itself (if you goto the site on the box via gnome) however externally or on another system on our internal network it's a no go.
i use Apache.
I want limit 50 GB Traffic on 1 Virtual Host.
How to?
For some reason, the first virtual host i have listed in apache2.conf gets all the traffic of all the other virtual hosts listed below it.
Example: Domain xyz.com is listed as the first virtual host. the second, third, and fourth are 123.com, 987.com, and mno.com, respectively (fictitious domains). However, it seems that everything below xyz.com goes straight to xyz.com.
If i switch the first entry, xyz.com with any of the others, such as mno.com, so that mno.com is the first virtual host entry, everything then forwards to that domain.
I am trying to do open_basedir in my httpd.conf file using wildcards so I dont have to set it up for EACH account.
Here is my Virtual Host part in my conf:
<VirtualHost *>
VirtualDocumentRoot /www/%2+/%1.1/%1.2/%1.3/%1/htdocs/
RewriteEngine On
RewriteCond %{HTTP_HOST} ^www..*$
RewriteRule ^(.+) %{HTTP_HOST}$1 [C]
RewriteRule ^www.(.+) http://$1 [P]
RequestHeader unset Accept-Encoding
RequestHeader unset Content-Encoding
</VirtualHost>
I have tried putting:
php_admin_value open_basedir /www/%2+/%1.1/%1.2/%1.3/%1/htdocs/
But I get this error looking at ANY PAGE:
Fatal error: Can't load /www/fatehost.net/a/l/d/aldo/htdocs/{FILE_IM_ON}, open_basedir restriction. in Unknown on line 0
I've downloaded and installed the Microsoft Virtual PC image for testing IE6. The development copy of my website is on the host PC, running on Windows XP/Apache/PHP. I need to use IE6 on the virtual PC to view pages served up by Apache on the host PC.
I know this requires networking them together, but I've no idea how to do that. I've installed the Microsoft Loopback Adapter on the host PC, and told the virtual PC it can use that adapter in the Virtual PC settings dialogue, but on the host PC the loopback adapter says "limited or no connectivity".
(Before someone suggests it, I've been using MultipleIEs. Trouble is, you can't test printing with that - you need a proper copy of IE6.)
I've run into a wall trying to run apache with multiple websites allowing users to use FTPd to manage files.
I'm running FreeBSD 7.1 on Apache 2.2.x
The issue is that Apache runs as www:www but FTPd writes the files as username:client. When performing some scripts that edit back-end files, this obviously can cause errors.
The data for each directory is stored in /home/username/www
I looked into some apache directives I could use. I tried putting User and Group directives into the vhost configuration for each vhost, but that did not work. I even found the perchild module and it looked like it can do the job but was a bit scared and turned off by the fact that it states it is beta at the top of the page. (I cannot link to it because I do not have enough posts.)
In the proxmox site they say that they have tested and validated virtual appliances for major virtualization technologies (VMWare, OpenVZ and Virtuozzo).
However I contacted two VPS providers and both said they cannot host this due to custom kernel of this product.
I wish to know are there any other hosts who can host this in a VPS.
My requirements are like 300GB disk space and 800G of monthly bandwidth (prefer a guaranteed core).
I have a virtual host and I want to allow .htaccess files to be used, but that requires to put allow override yes in the virtual host declairation as its off by default, but I get this error:
Starting httpd: Syntax error on line 16 of /etc/httpd/conf/virtualhosts.conf:
AllowOverride not allowed here
This completly ditches my whole virtual hosting idea that I've been planing for a while.
Any other way to allow .htaccess through virtual hosts?
using apache 2.2.3
what hosts are considered the best for virtual dedicated servers.
I know about the big names like GoDaddy and Yahoo, but who really has the best service and (importantly) the best price/value?
Heres what I need power-wise: Something that offers 2GB+ of RAM to me, 20GB+ Hard Drive space, and something thats running on Windows. I intend to run 3 e-commerce sites off this, so if you think I need more power please recommend it.
Today I configured a Virtual Host (VH) for one of my customers. VH run on WindowsServer 2003 Apache 2.0.59. I enabled mod_proxy and mod_proxy_http modules and successfully loaded. Here is the VH config:
Code:
<VirtualHost xxx.xxx.xxx.xxx:80>
ServerAdmin admin@example.com
ServerName www.example.com
DocumentRoot C:/Apache2/htdocs/www/example.com
DirectoryIndex index.php
<Proxy *>
Order Deny,Allow
Allow from all
</Proxy>
ProxyRequests Off
ProxyPass /cms-test [url]
ProxyPassReverse /cms-test [url]
ProxyPass /cms-eshop [url]
ProxyPassReverse /cms-eshop [url]
ErrorLog logs/www.example.com-error.log
CustomLog logs/www.example.com-access.log combined
</VirtualHost>
According stated above proxy should map the content of yyy.yyy.yyy.yyy:80 and send it to client... Apache doesn't do that but redirects client directly to yyy.yyy.yyy.yyy instead, even rewriting URL, what is not proper purpose of proxy. I would expect proxy to retrieve content from yyy.yyy.yyy.yyy:80 and forward it to client without URL rewriting. Rewriting URL and direct aiming of client to source of content is unsuccessfull of course, because the source (yyy.yyy.yyy.yyy:80) trust only to xxx.xxx.xxx.xxx which has a right to request a content.
Could anybody explain why proxy doesn't proxy and redirects instead?
I'm trying to setup a subdomain, and this is what i've added in httpd.conf
<VirtualHost 000.000.000.000>
ServerName dir.domain.com
DocumentRoot /home/domain/html/dir/
</VirtualHost>
Am i missing something here? I restarted httpd when finished.. but it doesnt work.
I just went with Steadcom's VPS and they are great. I am setting things up and it's going pretty well, I have to dust off my linux/server knowledge that I haven't used in a couple of years.
Anyway I'm creating a virtual host.. I will have about 10 in the end, but right now I only have one domain IP Pointing to my new server. My registrar is NamesDirect.
When I create the virtual host, I can no longer access subdirectories directly. My Virtual Host directory is, say, /var/www/html/newdir
If I try to reach http://www.domainname.com which has been configued as a virtual host, that comes up correctly from the directory /var/www/html/newdir and works fine.
But if I try to reach http://myipaddress/newdir I get a 404 page not found error. Looking at the log, it's trying to reach /var/www/html/newdir/newdir so it's putting in the virtual host redirect even for just hitting the subdirectory directly.
Is this normal? Do I have something configured wrong? I have another domain that I have changed to IP Point to the VPS but until it propogates I won't be able to test having 2 virtual hosts.
Also.. I have not set up DNS on my VPS. I don't really understand it, and IP Pointing has always worked for me when I ran my own server form my home so I was just going to do that. But I wonder if this could be one of the problems.
I am managing few virtual domains on a server.
Recently I have seen lots of email activity. Most of the emails are being sent with php scripts which are run under apache. what I want is to catch the culprit domain
so the sender's return path in most cases is root@xxxxx as apache is running under root user.
The server runs plesk admin panel.
I know I can always inspect messages in the queue, qmhandle is good as well to do so. but is there any better way.
e.g. is there a way that instead of emails sent from php scripts with apache user domain name in return path and not root@server etc.
any tools to analyze this activity and then take necessary actions.
I have a fresh Ubuntu 14.04 install (desktop). I installed Apache, php and mysql from APT and updated everything.I tried to setup a virtual host using these directions: URL...I followed them to the letter:
o I created a folder /var/www/mydomain.local/public_html
o I copied the 000-default.conf in sites available and modified it
o I added mydomain.local to my hosts file (with IP of 127.0.0.1
o I used a2ensite to enable the host
o I used service apache2 reload
When I went to mydomain.local in firefox, it took me to the default host main page.I tried a restart of the service and even a reboot of the computer. No change.On a theory, I used a2dissite to remote 000-default from the enabled site list and reloaded the service. I got the home page for mydomain.local after that.
I created a named host called localhost and reloaded the apache. When I went to http://localhost it took me to the mydomain.local homepage. Rebooted the computer. Now, localhost gives me the apache default home page and mydomain.local does not work at all (I get a server not found).
I get the feeling that there is an apache configuration item I am missing but I cannot find it.
I have a server server.SERVER.com which ajp-redirects /app to port 8009 in httpd.conf as
View 7 Replies View RelatedOS: RHEL 6.4
SELinux: permissive mode
Apache: 2.2, mod_fcgid, mod_suxec, mod_ssl enabled
Common Name: [URL] .....
i have xampp i followed this redivide.com/blog/setting-up-a-name-based-virtual-host-vhost/
when im on the computer that xampp runs on it works fine both domains go to their proper directory ones c://xampp/htdocs/fa and the others c://xampp/htdocs/wsd but when i try it on another computer both domains go to the default folder which is c://xampp/htdocs
i have followed twice a tutorial (you'll find it if you type in google "sellersrank ubuntu subversion". It is the second result. You know, I cant insert URL in my posts yet...) to install Ubuntu + Apache + Virtual host + Subversion, but when i try to access the repository through "svn.domain.com" an error message like this is showed:
Address Not Found
Firefox can’t find the server at svn.domain.com.
I have Ubuntu 8.04 + Apache 2.2.8
I'm going to use my apache server to host files(it works with a php script so we can't use FTP for now...) so I was wondering if I could limit this virtual host's bandwidth per second so the websites on the other virtual hosts still load properly. Any module for apache on windows which can do this?
View 2 Replies View RelatedI use Webmin (1.69) to work on my development environment. I am using Ubuntu Desktop 14.04 right now. I am not exactly an Ubuntu newbie but I would not call myself an expert either.
I created a virtual host (newdomain.local) with webmin. I filled in all the fields and saved the new VH definition. I added newdomain.local to my hosts file with an ip address of 127.0.0.1 and restarted apache.
When I go to [URL] ...., it is not taking me to the VH's home page but to the default home page.
Why this might be happening?
I have a WAMP server that hosts a few sites, but I have a particular site with about 5 domains. I want them all to point to the correct website folder and all to be redirected to a single domain for SEO purposes. Here is what it looks like in the virtual hosts file:
<VirtualHost 50.62.82.101>ServerAdmin info@hovaness.comDocumentRoot "c:/wamp/www/example"ServerName example.comServerAlias example.net www.example.com www.examples.net www.examples.com examples.com examples.netErrorLog "logs/example.com.log"
I'm looking for a host located in UK that can accept/support vpn/tunnel connections to the VPS - creation and access to vps' /dev/net/tun (TAP/TUN device) for use with tunneling services like vtun.
I am currently a customer of webhosting.uk.com, they look very good host but unfortunately they dont accept or support vpn on their VPS plans.
The bigger the list of hosts supporting vpn, the best.
Maybe hosts of other european countries too, if connection speed is acceptable.