Someone had mentioned a way to use virtual apache configs, this way you wouldn't have to reboot apache each time you add a new domain to your box.
Can you tell me what dso I need to use?
Also is there a conversion tool to grab the configs you have now, and migrate them to the external files?
I just installed a new server and I would like to transfer all virtual-hosts on new Apache installation.
I updated all IP addresses in each .config file and simply uploaded the edited conf files into new /etc/apache2/sites-available folder. I rebooted Apache, but through Webmin I can not see them on Existing virtual hosts list. Why? Do I need to manually re-add all the 30 sites?
I run a virtual server (Ubuntu 12.04, Plesk 12, Postfix 2.9.6) using plesk to manage multiple domains. The server address is server.domain1.com. I use plesk to also manage domain1.com regarding all services, including DNS and mail.
What I just found is that postfix sometimes issues the following warning:
server postfix/trivial-rewrite[7397]: warning: do not list domain server.domain1.com in BOTH mydestination and virtual_alias_domains
The essential part of my main.cf is:
myhostname = server.domain1.com
mydestination = localhost.$mydomain, localhost.localdomain, localhost
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
virtual_transport = plesk_virtual
And /var/spool/postfix/plesk/virtual_domains contains amongst others:
domain1.com domain1.com/
I do not have any issues with receiving or sending e-mails right now, but would like to get rid of the error message however.
Could it be the problem that postfix automatically sets mydomain to $myhostname with skipping the first part (i.e., mydomain is implicitly set to domain1.com)? Should I manually set mydomain to server.domain1.com instead? Any other recommendations? Since mydomain seems to be used in multiple options [URL] ..., I wonder what I might destroy with changing this? As all mail services run without any further troubles at the moment, I don't want to break this...
As I assume that quite some people use a plesk-based server to manage the domain to which the server itself belongs to, I would assume that there should be a general fix/check to updated mydomain accordingly?
my server there it one site
but this site His alexa ranking of 7.000
i need Apache Global Configuration
StartServers = ?
and this
MinSpareServers = ?
and this
MaxSpareServers = ?
and this
MaxClients = ?
and this
MaxRequestsPerChild = ?
browsing heavily on the site, which lead to stoppage of the Apache
Server Information
Intel Core 2 Quad Q9550 2.83GHz
8GB Ram
Is there any way to dump all of the current configuration parameters that apache is operating with?
I am clear on setting them in apache's config file. What I would like to do is view every parameter apache is operating with.
I am trying to troubleshoot what is believed to be an apache issue on one of my servers.
I have a couple of directories on my server that require authentication (MySQL DBD and AuthUserFile). Both work fine with SSL off. When I use SSL on directories without authentication that also works fine. However, when I put the 2 together, authentication is by-passed. I cannot seem to get the configuration right to do both. Here is my VH conf file (sanitized):
Code:
LoadModule dbd_module modules/mod_dbd.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
<VirtualHost *:80>
DocumentRoot "/var/www/html"
ServerName myhost.mydomain.com
ServerAdmin mailman-owner@mydomain.com
ErrorLog "/var/log/httpd/myhost_error_log"
CustomLog "/var/log/httpd/myhost_access_log" combined
[Code] .....
I was recently inroduced to lighttpd being able to run on apache with a different port. So I setup my lighttpd that way.
lighttpd.conf
Code:
server.modules = (
"mod_access",
"mod_fastcgi",
"mod_cgi",
"mod_accesslog" )
server.document-root = "/var/www/vhosts/domain.com/httpdocs/lighttpd/"
server.errorlog = "/var/log/lighttpd/error.log"
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
and my httpd.conf
Code:
ProxyRequests Off
ProxyPreserveHost On
ProxyPass /lighttpd http://0.0.0.0:81/
ProxyPassReverse / http://0.0.0.0:81/
Now when I created a folder on my server's httpdocs /lighttpd/
everything runs smooth so I got the lighty to work for me.
Okay now that i figure it works I wanted to run one of my subdomain on lighty so that I can reduce the load on the server. Does anyone know how I can setup one of my subdomain to open with lighttpd and keep everything else on apache?
I want to set the Timeout value bigger for a specific folder.
View 5 Replies View RelatedAfter installing Zend with /scripts/installzendopt on a cPanel server I am getting the following:
Code:
root@comet [~]# apachectl start
/usr/sbin/apachectl: Apache 1.3 configuration directives found
/usr/sbin/apachectl: please read /usr/share/doc/httpd-2.0.52/migration.html
Virtualhosts look like this:
Code:
<VirtualHost [IP]>
ServerAlias [www.domain.com]
ServerAdmin webmaster@[domain.com]
DocumentRoot /home/fohrmann/public_html/[username]
ServerName [domain.com]
User [user]
Group [group]
BytesLog /usr/local/apache/domlogs/[logfile]
CustomLog /usr/local/apache/domlogs/[logfile] combined
ScriptAlias /cgi-bin/ /home/[username]/public_html/gb/cgi-bin/
</VirtualHost>
you can find a article to "20 ways to Secure your Apache Configuration" in this link:
[url]
I have a problem after change permissions :
chown -R root:root /usr/local/apache
chmod -R o-rwx /usr/local/apache
after run above commands when I trying to restart apache show me this error:
Warning: SuexecUserGroup directive requires SUEXEC wrapper.
In my computer (Windows 7 Ultimate) I host my sites with Apache 2.2.25 - mod_fcgid-2.3.6-win32-x86 and PHP 5.4.28. In "httpd-vhosts.conf" file from Apache I have my domain set as follows and work fine (http://www.example.com or http://example.com):
Code:
<VirtualHost *:80>
ServerAdmin webmaster@example.com
DocumentRoot "D:/Apache22/vhosts/Example"
ServerName example.com
ServerAlias www.example.com *.example.com
[Code] ....
And I set up a subdomain as follows:
Code:
<VirtualHost *:80>
ServerAdmin director@example.com
DocumentRoot "D:/Apache22/vhosts/DirectorExample"
ServerName director.example.com
ServerAlias www.director.example.com *.director.example.com
[Code] .....
But when I tried to access the page: http://www.director.example.com or http://director.example.com, I was redirected to the page http://www.example.com.
I have DNS configured for "example.com" and "director.example.com". This sites is live in another server.
Error.log files for "director.example.com" and Apache is empty. How can I configure the subdomain to work?
I'm trying to run Web Blast 2.2.28+ locally trough Easy PHP Dev Server 13.1 (Apache 2.2, Windows 7), but when I click on search it shows ERROR 403 when I open it within my site or the following message appears (blast.cgi content), when I use directly the blast.html page:
#!/bin/csh -f # # $Id: blast.cgi,v 1.1 2002/08/06 19:03:51 dondosha Exp $ # echo "Content-type: text/html" echo "" #setenv DEBUG_COMMAND_LINE TRUE setenv BLASTDB db ./blast.REAL
I'm trying to run Web Blast 2.2.28+ locally trough Easy PHP Dev Server 13.1 (Apache 2.2, Windows 7), but when I click on search it shows ERROR 500 couldn't create child process: 720002: blast.cgi
View 1 Replies View RelatedI just have a question about an Apache 2.0 error. I am running a web host and I am using VHCS for my web hosting control panel which creates virtual hosts in Apache's config files. Whenever I have a certain number of virtual hosts (200 or more roughly) Apache will start giving me problems with no messages about what went wrong. Some examples of what Apache does is that it will crash when I run "apache2ctl restart" or it just won't run when I start it sometimes. It really annoys me since I'm wondering if it's an Apache memory issue. Any ideas on what to do or how to solve this dilemma?
View 2 Replies View Relatedi bought some webspace and i have uploaded mywebsite.I need to configure my domain atomuss.com to have virtual hosts.How is that done?.I have tried contacting my webmaster and it seems he is making himself unavailable everytime i speak want a word with him.
Anybody..
For some reason, the first virtual host i have listed in apache2.conf gets all the traffic of all the other virtual hosts listed below it.
Example: Domain xyz.com is listed as the first virtual host. the second, third, and fourth are 123.com, 987.com, and mno.com, respectively (fictitious domains). However, it seems that everything below xyz.com goes straight to xyz.com.
If i switch the first entry, xyz.com with any of the others, such as mno.com, so that mno.com is the first virtual host entry, everything then forwards to that domain.
I have a little trouble with my Apache configurations. I have two computers with Ubuntu and Apache 2.2 - let's call them Home (192.168.1.2) and Server (192.168.1.3) connected with a router. I am working on Home, connecting to Server via ssh and mounting the web root directory of Server to Home via sshfs -> Server's /var/www becomes Home's /home/username/www. The problem is I can't really setup my Apache virtual hosts. I have a project in Server's /var/www/project, respectively Home's /home/username/www/project, and I want to create a virtual host on Home that lets me view the remote contents.
This is what I am adding to Home's /etc/hosts: 192.168.1.3 project
This is what I am adding to Home's /etc/apache2/sites-available/project:
<VirtualHost 192.168.1.3:80>
DocumentRoot /home/username/www/project
ServerName project
</VirtualHost>
After all this, when I open http://project/ in Home's browser, I just see the default apache page of Server (the one in /var/www).
I am messing with Apache at home and have managed to create virtual hosts with no problems, my next step was to produce a self signed SSL cert. which again has worked but it's redirecting my non-SSL virtual host to the host I have set-up for SSL for example:
- www.mysite1.com set-up with SSL and works as designed both http and https
- www.mysite2.com I don't want using SSL is working fine through http but if you try https it will then redirect to www.mysite1.com
I'm using the following vhost script: URL...This used to work on an older version of apache in Windows. Now I'm running Apache 2.4.6 on Ubuntu 12.04.
When I type in, for example, dhae.papertower.dev, it processes some scripts internally and moves me to www.dhae.papertower.dev.. and breaks. When I check my log, I find that it's trying to go to the /var/www/papertower/www directory.
I tried adding www.*.papertower.dev to the ServerAlias, but that didn't do it.
I am trying a webpage siremis whenever i try to login i am getting below error in error log of apache [client 192.168.137.7:4758] AH01630: client denied by server configuration: /opt/siremis-4.0.0/siremis/.htaccess
in httpd.conf following is the rule
Alias /siremis "/opt/siremis-4.0.0/siremis"
<Directory "/opt/siremis-4.0.0/siremis">
Options Indexes FollowSymLinks MultiViews
[code]....
i am using apache 2 and php 5.5.1 and mysql 5.6.12.
I want to setup a password for a website running on Ubuntu server, and find Apache can be used. It is implemented by config httpd.conf file and .htaccess file.
So I want to ask:
1. In this case, the password is setup for a path on the server configured in httpd.conf file. Like in the following example:
Code: <Directory "/var/www/html/MySite">
The password is setup for the path to Mysite,right?
2. If my content of website is not stored under /var/www folder, I cannot use this way to setup a password for website, right? May use PHP instead?
production looking to use latest version of apache from apache lounge:
Apache 2.4.7 Win64
Which version of PHP is recommend?
Which version of WinCache is recommended?
Which version of mysql is recommended?
I've looked into WinCache how to install it and hook it up to php, but i'm guessing you add the extensions in the php.ini?
I have to modify the two apache settings LimitRequestLine and LimitRequestFieldSize. Strangely, the setting has to be made to the first VirtualHost that gets loaded and it will then be changed for all virtual hosts. I don't understand why that's the case, but I was able to verify it works on a local test server.
But how do I find out which virtual host is loaded first? I tried with default of course, but that one isn't it.
Or how to make the setting to apache?
I run Plesk Panel 11.5 on Debian 7
I've run into a wall trying to run apache with multiple websites allowing users to use FTPd to manage files.
I'm running FreeBSD 7.1 on Apache 2.2.x
The issue is that Apache runs as www:www but FTPd writes the files as username:client. When performing some scripts that edit back-end files, this obviously can cause errors.
The data for each directory is stored in /home/username/www
I looked into some apache directives I could use. I tried putting User and Group directives into the vhost configuration for each vhost, but that did not work. I even found the perchild module and it looked like it can do the job but was a bit scared and turned off by the fact that it states it is beta at the top of the page. (I cannot link to it because I do not have enough posts.)
I have a virtual host and I want to allow .htaccess files to be used, but that requires to put allow override yes in the virtual host declairation as its off by default, but I get this error:
Starting httpd: Syntax error on line 16 of /etc/httpd/conf/virtualhosts.conf:
AllowOverride not allowed here
This completly ditches my whole virtual hosting idea that I've been planing for a while.
Any other way to allow .htaccess through virtual hosts?
using apache 2.2.3
Today I configured a Virtual Host (VH) for one of my customers. VH run on WindowsServer 2003 Apache 2.0.59. I enabled mod_proxy and mod_proxy_http modules and successfully loaded. Here is the VH config:
Code:
<VirtualHost xxx.xxx.xxx.xxx:80>
ServerAdmin admin@example.com
ServerName www.example.com
DocumentRoot C:/Apache2/htdocs/www/example.com
DirectoryIndex index.php
<Proxy *>
Order Deny,Allow
Allow from all
</Proxy>
ProxyRequests Off
ProxyPass /cms-test [url]
ProxyPassReverse /cms-test [url]
ProxyPass /cms-eshop [url]
ProxyPassReverse /cms-eshop [url]
ErrorLog logs/www.example.com-error.log
CustomLog logs/www.example.com-access.log combined
</VirtualHost>
According stated above proxy should map the content of yyy.yyy.yyy.yyy:80 and send it to client... Apache doesn't do that but redirects client directly to yyy.yyy.yyy.yyy instead, even rewriting URL, what is not proper purpose of proxy. I would expect proxy to retrieve content from yyy.yyy.yyy.yyy:80 and forward it to client without URL rewriting. Rewriting URL and direct aiming of client to source of content is unsuccessfull of course, because the source (yyy.yyy.yyy.yyy:80) trust only to xxx.xxx.xxx.xxx which has a right to request a content.
Could anybody explain why proxy doesn't proxy and redirects instead?
I'm trying to setup a subdomain, and this is what i've added in httpd.conf
<VirtualHost 000.000.000.000>
ServerName dir.domain.com
DocumentRoot /home/domain/html/dir/
</VirtualHost>
Am i missing something here? I restarted httpd when finished.. but it doesnt work.
