my server there it one site
but this site His alexa ranking of 7.000
i need Apache Global Configuration
StartServers = ?
and this
MinSpareServers = ?
and this
MaxSpareServers = ?
and this
MaxClients = ?
and this
MaxRequestsPerChild = ?
browsing heavily on the site, which lead to stoppage of the Apache
Server Information
Intel Core 2 Quad Q9550 2.83GHz
8GB Ram
I have just saw on leaseweb noc site that there has been a public release of a Apache DoS tool and all All versions of Apache are vulnerable.
So can anyone confirm this and give some possible solution or advices? ....
Someone had mentioned a way to use virtual apache configs, this way you wouldn't have to reboot apache each time you add a new domain to your box.
Can you tell me what dso I need to use?
Also is there a conversion tool to grab the configs you have now, and migrate them to the external files?
Is there any way to dump all of the current configuration parameters that apache is operating with?
I am clear on setting them in apache's config file. What I would like to do is view every parameter apache is operating with.
I am trying to troubleshoot what is believed to be an apache issue on one of my servers.
I have a couple of directories on my server that require authentication (MySQL DBD and AuthUserFile). Both work fine with SSL off. When I use SSL on directories without authentication that also works fine. However, when I put the 2 together, authentication is by-passed. I cannot seem to get the configuration right to do both. Here is my VH conf file (sanitized):
Code:
LoadModule dbd_module modules/mod_dbd.so
LoadModule authn_dbd_module modules/mod_authn_dbd.so
<VirtualHost *:80>
DocumentRoot "/var/www/html"
ServerName myhost.mydomain.com
ServerAdmin mailman-owner@mydomain.com
ErrorLog "/var/log/httpd/myhost_error_log"
CustomLog "/var/log/httpd/myhost_access_log" combined
[Code] .....
I was recently inroduced to lighttpd being able to run on apache with a different port. So I setup my lighttpd that way.
lighttpd.conf
Code:
server.modules = (
"mod_access",
"mod_fastcgi",
"mod_cgi",
"mod_accesslog" )
server.document-root = "/var/www/vhosts/domain.com/httpdocs/lighttpd/"
server.errorlog = "/var/log/lighttpd/error.log"
index-file.names = ( "index.php", "index.html",
"index.htm", "default.htm" )
and my httpd.conf
Code:
ProxyRequests Off
ProxyPreserveHost On
ProxyPass /lighttpd http://0.0.0.0:81/
ProxyPassReverse / http://0.0.0.0:81/
Now when I created a folder on my server's httpdocs /lighttpd/
everything runs smooth so I got the lighty to work for me.
Okay now that i figure it works I wanted to run one of my subdomain on lighty so that I can reduce the load on the server. Does anyone know how I can setup one of my subdomain to open with lighttpd and keep everything else on apache?
I want to set the Timeout value bigger for a specific folder.
View 5 Replies View RelatedAfter installing Zend with /scripts/installzendopt on a cPanel server I am getting the following:
Code:
root@comet [~]# apachectl start
/usr/sbin/apachectl: Apache 1.3 configuration directives found
/usr/sbin/apachectl: please read /usr/share/doc/httpd-2.0.52/migration.html
Virtualhosts look like this:
Code:
<VirtualHost [IP]>
ServerAlias [www.domain.com]
ServerAdmin webmaster@[domain.com]
DocumentRoot /home/fohrmann/public_html/[username]
ServerName [domain.com]
User [user]
Group [group]
BytesLog /usr/local/apache/domlogs/[logfile]
CustomLog /usr/local/apache/domlogs/[logfile] combined
ScriptAlias /cgi-bin/ /home/[username]/public_html/gb/cgi-bin/
</VirtualHost>
you can find a article to "20 ways to Secure your Apache Configuration" in this link:
[url]
I have a problem after change permissions :
chown -R root:root /usr/local/apache
chmod -R o-rwx /usr/local/apache
after run above commands when I trying to restart apache show me this error:
Warning: SuexecUserGroup directive requires SUEXEC wrapper.
In my computer (Windows 7 Ultimate) I host my sites with Apache 2.2.25 - mod_fcgid-2.3.6-win32-x86 and PHP 5.4.28. In "httpd-vhosts.conf" file from Apache I have my domain set as follows and work fine (http://www.example.com or http://example.com):
Code:
<VirtualHost *:80>
ServerAdmin webmaster@example.com
DocumentRoot "D:/Apache22/vhosts/Example"
ServerName example.com
ServerAlias www.example.com *.example.com
[Code] ....
And I set up a subdomain as follows:
Code:
<VirtualHost *:80>
ServerAdmin director@example.com
DocumentRoot "D:/Apache22/vhosts/DirectorExample"
ServerName director.example.com
ServerAlias www.director.example.com *.director.example.com
[Code] .....
But when I tried to access the page: http://www.director.example.com or http://director.example.com, I was redirected to the page http://www.example.com.
I have DNS configured for "example.com" and "director.example.com". This sites is live in another server.
Error.log files for "director.example.com" and Apache is empty. How can I configure the subdomain to work?
I'm trying to run Web Blast 2.2.28+ locally trough Easy PHP Dev Server 13.1 (Apache 2.2, Windows 7), but when I click on search it shows ERROR 403 when I open it within my site or the following message appears (blast.cgi content), when I use directly the blast.html page:
#!/bin/csh -f # # $Id: blast.cgi,v 1.1 2002/08/06 19:03:51 dondosha Exp $ # echo "Content-type: text/html" echo "" #setenv DEBUG_COMMAND_LINE TRUE setenv BLASTDB db ./blast.REAL
I'm trying to run Web Blast 2.2.28+ locally trough Easy PHP Dev Server 13.1 (Apache 2.2, Windows 7), but when I click on search it shows ERROR 500 couldn't create child process: 720002: blast.cgi
View 1 Replies View RelatedI am trying a webpage siremis whenever i try to login i am getting below error in error log of apache [client 192.168.137.7:4758] AH01630: client denied by server configuration: /opt/siremis-4.0.0/siremis/.htaccess
in httpd.conf following is the rule
Alias /siremis "/opt/siremis-4.0.0/siremis"
<Directory "/opt/siremis-4.0.0/siremis">
Options Indexes FollowSymLinks MultiViews
[code]....
i am using apache 2 and php 5.5.1 and mysql 5.6.12.
I want to setup a password for a website running on Ubuntu server, and find Apache can be used. It is implemented by config httpd.conf file and .htaccess file.
So I want to ask:
1. In this case, the password is setup for a path on the server configured in httpd.conf file. Like in the following example:
Code: <Directory "/var/www/html/MySite">
The password is setup for the path to Mysite,right?
2. If my content of website is not stored under /var/www folder, I cannot use this way to setup a password for website, right? May use PHP instead?
production looking to use latest version of apache from apache lounge:
Apache 2.4.7 Win64
Which version of PHP is recommend?
Which version of WinCache is recommended?
Which version of mysql is recommended?
I've looked into WinCache how to install it and hook it up to php, but i'm guessing you add the extensions in the php.ini?
I have to modify the two apache settings LimitRequestLine and LimitRequestFieldSize. Strangely, the setting has to be made to the first VirtualHost that gets loaded and it will then be changed for all virtual hosts. I don't understand why that's the case, but I was able to verify it works on a local test server.
But how do I find out which virtual host is loaded first? I tried with default of course, but that one isn't it.
Or how to make the setting to apache?
I run Plesk Panel 11.5 on Debian 7
So here's my situation: I have a rented vent server, that I wanted to point vent.mydomain.com to the IP of said vent server. I put an A record in the dns pointing to the server and all is well. When I type vent.mydomain.com into a browser it take me to the cPanel/WHM page saying "Great Success, Apache is working". Is it possible that I can somehow have that get redirected to the main site or no?
Basically if Im connecting with the vent client, I want it forwarded to the vents IP, otherwise I want to have it redirected to mydomain.com.
I am a non-tech person trying to configure Nginx to serve static content (apache will remain on port 80 for the dynamic stuff).
Nginx is already installed, what I need is a workable configuration file for nginx so that it serves all static stuff (images and a few folders with static html) and instructions in how to create it. The server is running DirectAdmin panel, Apache 2.24, PHP 5.23 and XCache 1.2.
We have following rule in httpd-vhosts.conf and it was working all ok.
All of sudden we have found on one day that it stopped working and we did some configuration tweak with this rule but none of them worked.
During troubleshooting, last change was disabling mod_security and after that it started working again. However, next day we had again enabled mod_security to get issue replicated but found it working all ok.
Any clue for such behaviour of Apache ? Why all of sudden following working rule may get stopped working and then starts working again ?
<IfModule mod_headers.c>
SetEnvIf Origin "https://(www.)?(v1.abc.com|v1ak.abc.com|v2.asite.com)$" AccessControlAllowOrigin=$0$1
Header Set Access-Control-Allow-Origin %{AccessControlAllowOrigin}e env=AccessControlAllowOrigin
Header Set Access-Control-Allow-Credentials "true"
Header Set Access-Control-Allow-Methods "GET, POST, OPTIONS"
Header Set Access-Control-Allow-Headers "origin, content-type, accept, X-Requested-With"
Header always unset Expires
</IfModule>
OS and Apache Version details are below:
Apache Version :2.2.27(win32), OS: Windows 2008 R2, ModSecurity Rule Set ver.1.5
I've a Wordpress Blog on a Ubuntu 13.10 server with Apache 2.4.2.
For only one page on this site I've this error and can't find a solution.
After upgrade to Parallels plesk v 12.0.18 update #5 we were getting a blank screen. We have managed to get logged into the server but have errors - plus all the websites are down with a 404 error Apache Server at gardenbuildings.domainame.co.uk Port 443.
On the Plesk management it is showing: New configuration files for the Apache web server were not created due to the errors in configuration templates:
mkdir: cannot create directory `/var/www/vhosts/system/domainname.com/conf': No such file or directory mktemp: failed to create file via template `/var/www/vhosts/system/domainname.com/conf/httpd.conf.XXXXXX': No such file or directory Can not create temporary file .
Detailed error descriptions were sent to you by email. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
Also when trying to resolve the issues and generating all configuration files I am getting this error:
Unable to configure the web server: Execution failed. Command: httpdmng Arguments: Array ( [0] => --reconfigure-all )
Details: Execution failed. Command: httpdmng Arguments: Array ( [0] => --reconfigure-domains [1] => addisonousebank.co.uk,blog.addisonousebank.co.uk,garages.addisonousebank.co.uk,
[Code] ....
I just installed a new server and I would like to transfer all virtual-hosts on new Apache installation.
I updated all IP addresses in each .config file and simply uploaded the edited conf files into new /etc/apache2/sites-available folder. I rebooted Apache, but through Webmin I can not see them on Existing virtual hosts list. Why? Do I need to manually re-add all the 30 sites?
I am trying to setup dynamic content configuration in apache 2.2 httpd conf. Here is the configuration and couple test cases:
CONF:
<FilesMatch ".(js|css|gif|jpg|jpeg|png)$">
Header set Cache-Control "no-cache, no-store, max-age=0, must-revalidate"
</FilesMatch>
TEST 1:
Without <FilesMatch> directive, the headers are set to all requested content as it should. This includes content served from apache server and content from a separate application server.
TEST 2:
If I use the above configuration example, I can see that static content comes with correct headers only
OS CentOS 6.5
Panel version 11.5.30 Update #50
Tried migrating a site from a much older server. The migration never completed, so it was aborted and all the migration files deleted. Now, I'm getting the following error on the Plesk Home page:
=================
New configuration files for the Apache web server were not created due to the errors in configuration templates: httpd: Syntax error on line 221 of /etc/httpd/conf/httpd.conf: Syntax error on line 7 of /etc/httpd/conf.d/zz010_psa_httpd.conf: Syntax error on line 319 of /etc/httpd/conf/plesk.conf.d/roundcube.conf: Could not open configuration file /etc/httpd/conf/plesk.conf.d/webmails/roundcube/xxxxxxxxxxx.com_webmail.conf: No such file or directory . The error message containing the detailed error descriptions was sent to you by e-mail. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
=================
Clicking either of the 2 available options (links) does not resolve the issue. How to clear this error?
I tried to add ac new subscription and this failed.No I have an inconsistent subscription and get the following error: New configuration files for the Apache web server were not created due to the errors in configuration templates:
Template processing failed: file = /opt/psa/admin/ conf/ templates/ default/domainVhost.php,
error = Template_Exception: No data. file: /opt/psa/admin/plib/Template/Processor.php line: 28 code: 0
Previous error: Template_Variable_Exception: No data. file: /opt/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
Detailed error descriptions were sent to you by email.click here to generate broken configuration files once again or here to generate all configuration files.
I have Plesk 12.0.18 on Ubuntu